Looking for a UK Stock Retail GB Rom thats has been rooted, Can anyone point me in the direction of a download link?
Ta
What service are you on? Orange UK?
Alaq said:
What service are you on? Orange UK?
Click to expand...
Click to collapse
Nope - I'm a Sim Free Retail Rom UK
Go here, and look under Europe.
But be warned, since your on 2.3.4, you can only flash 2.3.4 or higher ROMs via RSD. If you flash a 2.2.2- you will get bricked.
Alaq said:
Go here, and look under Europe.
But be warned, since your on 2.3.4, you can only flash 2.3.4 or higher ROMs via RSD. If you flash a 2.2.2- you will get bricked.
Click to expand...
Click to collapse
Thanks - Are they Rooted? That's a must
No, but you can root very easily with Pete's Motorola Root Tools.
Related
Hey guys,
first post here. =D
I have a Vivo branded phone (Carrier from Brazil). It's unlocked, but I can't yet update to 2.1 because unlocking does not unbrand. =/ Vivo is only releasing the 2.1 on the last week of november.
There is a lot of information here in the forum, but I found it a little confuse - too much information.
So my question, is there a safe way to unbrand my 1.6 X10a without rooting it?
Thanks!
jufranz said:
Hey guys,
first post here. =D
I have a Vivo branded phone (Carrier from Brazil). It's unlocked, but I can't yet update to 2.1 because unlocking does not unbrand. =/ Vivo is only releasing the 2.1 on the last week of november.
There is a lot of information here in the forum, but I found it a little confuse - too much information.
So my question, is there a safe way to unbrand my 1.6 X10a without rooting it?
Thanks!
Click to expand...
Click to collapse
YES, i do it
mipepim said:
YES, i do it
Click to expand...
Click to collapse
Sorry, what would it be?
Does the replacement method on SEUS works?
jufranz said:
So my question, is there a safe way to unbrand my 1.6 X10a without rooting it?
Thanks!
Click to expand...
Click to collapse
Install this - http://forum.xda-developers.com/showthread.php?t=825675
Use this to change region - http://forum.xda-developers.com/showthread.php?t=828163
XperiaX10iUser said:
Install this -
Use this to change region - [
Click to expand...
Click to collapse
Tks! But to do that I need to root right? Another question (sory, i'm new to the android plataform) I must update prom 1.6 to, 2.1 World generic then change the code to 2.1 Brazil generic, right?
How can I save the Branded Firmware if I need it in the future?
So, can anyone confirm that the SEUS method to debrand the X10 still works?
jufranz said:
Tks! But to do that I need to root right? Another question (sory, i'm new to the android plataform) I must update prom 1.6 to, 2.1 World generic then change the code to 2.1 Brazil generic, right?
How can I save the Branded Firmware if I need it in the future?
Click to expand...
Click to collapse
1- if you update your phone from 1.6 to 2.1, the code will stay the same (Brazil stays Brazil) unless you use the flash tool to upgrade with another firmware.
2- You can try to download the flash tool with the right firmware if it's available, else, just use the 12XX-XXXX code on your phone (under the battery on the sticker) and rebrand using the different methods available on XDA.
jufranz said:
So, can anyone confirm that the SEUS method to debrand the X10 still works?
Click to expand...
Click to collapse
If you mean the one where you have to quickly replace a file while it's updating, no it doesn't work anymore.
BingoRingo said:
If you mean the one where you have to quickly replace a file while it's updating, no it doesn't work anymore.
Click to expand...
Click to collapse
It doesn't, sad =/ LoL
Let's root and unbrand then =D
How can I backup my actual firmware?
Tks!
where can i find israeli Atrix 4g 2.3.6 SBF ?
my device is from ATT and it has to be compatible with Cellcom (operator).
Thanks !!!
Flashing a non-ATT sbf will ruin your phone. Just set up and use a Cellcom APN.
Inspiredwire said:
Can't you just use a different APN?
Click to expand...
Click to collapse
i want to flash with RSDlite and i have no idea if it is safe to flash a different build...I just want to return to stock xD
nathan96 said:
i want to flash with RSDlite and i have no idea if it is safe to flash a different build...I just want to return to stock xD
Click to expand...
Click to collapse
Gotchya. What build are you running now?
If you've already unlocked the bootloader, forget about RSDLite. You may accidentally brick your phone. Just flash a Fruitcake via recovery.
http://forum.xda-developers.com/showthread.php?t=1583199
Inspiredwire said:
Gotchya. What build are you running now?
If you've already unlocked the bootloader, forget about RSDLite. You may accidentally brick your phone. Just flash a Fruitcake via recovery.
http://forum.xda-developers.com/showthread.php?t=1583199
Click to expand...
Click to collapse
Ok, thanks !
But where is the danger in RSDlite ? i flashed my fathers Razr several times before, and the store where i bought the device also using RSDlite to flash back to stock.
nathan96 said:
Ok, thanks !
But where is the danger in RSDlite ? i flashed my fathers Razr several times before, and the store where i bought the device also using RSDlite to flash back to stock.
Click to expand...
Click to collapse
Got orange's cwm and sbf but I would recommend you to use Nottachtrix instead. If you still want one of them, PM me and I'll upload it for you.
Sent from my MB860 using xda app-developers app
Vazay said:
Got orange's cwm and sbf but I would recommend you to use Nottachtrix instead. If you still want one of them, PM me and I'll upload it for you.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I need the Cellcom ROM or Something that is compatible with Cellcom in Israel of course, thanks !
nathan96 said:
I need the Cellcom ROM or Something that is compatible with Cellcom in Israel of course, thanks !
Click to expand...
Click to collapse
All you need is the Cellcom APN.
Do not try and flash a non-ATT SBF to your Atrix. It will not work.
And to answer your question "But where is the danger in RSDlite ?", it's dangerous because if you flash the wrong SBF by accident you can permanently brick your phone. If I were you I would just flash a 2.3.6 Fruitcake via recovery. It's the same thing minus the troublesome bootloader problems.
if you device is at&t manufactured , then you need at&t sbf
if it's from orange manufactured , then i can give you the for the orange sbf
any of those should work with cellcom , but you must match the one for your specific device (as described above)
Thank you and please take a look at this
http://forum.xda-developers.com/showpost.php?p=29584039&postcount=10
I do not want a fruitcake because 2.3.6 is only on the test server and it is not the final release.
Hy, i have a question
Is it possible to install an atrix 4g firmware on a europe retail atrix(mb860)? Is there a problem whit my network provider?
Thx in advance
tybylyca2001 said:
Hy, i have a question
Is it possible to install an atrix 4g firmware on a europe retail atrix(mb860)? Is there a problem whit my network provider?
Thx in advance
Click to expand...
Click to collapse
if you mean, if you can install ROMs that are available here in the forum, then yes, you can
Atrix
my atrix(not 4g) has android version si 2.3.4, and i found on motorola web site that atrix 4g has 2.3.6 latest update, and i wonder if i can instal that update on my atrix.
If you want to brick your phone, then yes if not, there's always the Bell 2.3.6 firmware which should work on all international Atrixes.
Sent from that Atrix... Motorola, where's my ICS?!
tatperson said:
If you want to brick your phone, then yes if not, there's always the Bell 2.3.6 firmware which should work on all international Atrixes.
Sent from that Atrix... Motorola, where's my ICS?!
Click to expand...
Click to collapse
Nice, i already brick my phone, ) because i receive the answer to late, but, i manage to recover with 2.3.6 brasil retail firmware
cheers mate, thank you for the answer
So does it mean that I can install bell firmware 2.3.6 on uk atrix without boot loader unlocking?
kzkalra said:
So does it mean that I can install bell firmware 2.3.6 on uk atrix without boot loader unlocking?
Click to expand...
Click to collapse
Yes, you can flash Bell 2.3.6 SBFs on stock or rooted firmware on UK atrix. Just be careful and know what you're flashing over RSD Lite.
Sent from that Atrix... Motorola, where's my ICS?!
I have this phone stuck on 4.1. how would i update it to the newest (not sure what is the newest) rom ?
kunikida said:
I have this phone stuck on 4.1. how would i update it to the newest (not sure what is the newest) rom ?
Click to expand...
Click to collapse
of which region ur phone is...??
region
7827505059 said:
of which region ur phone is...??
Click to expand...
Click to collapse
region. i bought it new from telus in ontario canada.
kunikida said:
region. i bought it new from telus in ontario canada.
Click to expand...
Click to collapse
no official update has came for telus version...
u hav to install a custom rom in it...
see threads for the installation...
7827505059 said:
no official update has came for telus version...
u hav to install a custom rom in it...
see threads for the installation...
Click to expand...
Click to collapse
I am using telus and i am in india when i install custom rom in my phone sim do not work on my phone i think its locked how to unlock carrirer or any other way to fix it.
shivangshukla said:
I am using telus and i am in india when i install custom rom in my phone sim do not work on my phone i think its locked how to unlock carrirer or any other way to fix it.
Click to expand...
Click to collapse
you must have flashed wrong rom...
flash the appropriate rom and recovery...
and it can't get carrier locked just by flashing...
I Have a GS9+ through sprint (GS965U) and was wondering if i flashed a stock firmware GS965U1 would it unlock my phone?
No
dhonzik said:
No
Click to expand...
Click to collapse
So it would do nothing?
Sethgodd said:
So it would do nothing?
Click to expand...
Click to collapse
May soft brick your phone
Sethgodd said:
I Have a GS9+ through sprint (GS965U) and was wondering if i flashed a stock firmware GS965U1 would it unlock my phone?
Click to expand...
Click to collapse
it won't brick your phone. you will just have stock Samsung firmware without any bloatware. Don't listen to the guy above lol. But no it won't unlock it. You must get the unlock code from your carrier or a third party before you flash another firmware or it won't be able to be unlocked till you flash back and enter the code in on your carriers firmware.