Related
Hello,
I have problem with flashing stock firmware on my atrix 4g.
RSD -lite return error:
Failed flashing process. Unable to retrieve interface handle. (0x7027).
Thats happens when I would go back to stock firmware from CM7.
Before running RSD flashing, I was execute following fastboot commands:
fastboot erase boot
fatsboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase osh
fastboot erase logo
fastboot erase radio
Before 2-3 times mentioned above method without erase radio commands not return any errors with RSD flashing. And have not any problem.
Can anybody advice and help me ?
Thanks for help and advice.
Solved
alcpis said:
Hello,
I have problem with flashing stock firmware on my atrix 4g.
RSD -lite return error:
Failed flashing process. Unable to retrieve interface handle. (0x7027).
Thats happens when I would go back to stock firmware from CM7.
Before running RSD flashing, I was execute following fastboot commands:
fastboot erase boot
fatsboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase osh
fastboot erase logo
fastboot erase radio
Before 2-3 times mentioned above method without erase radio commands not return any errors with RSD flashing. And have not any problem.
Can anybody advice and help me ?
Thanks for help and advice.
Click to expand...
Click to collapse
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot.
2. Power on phone and select fastboot
3. execute: fastboot flash radio bp.img, Where bp.img baseband image files
4. execute: fastboot reboot
5. Phone automatically boot on the android recovery mode
6. Wipe userdata/cache
7. Reload in RSD mode
8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Thanks.
alcpis said:
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot.
2. Power on phone and select fastboot
3. execute: fastboot flash radio bp.img, Where bp.img baseband image files
4. execute: fastboot reboot
5. Phone automatically boot on the android recovery mode
6. Wipe userdata/cache
7. Reload in RSD mode
8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Thanks.
Click to expand...
Click to collapse
Can you be a bit more specific on syntax used. I have the atrix baseband img in the fastboot folder and all is good but I get a "cannot load" error. The name of the baseband img file is baseband_OTA.img So with that in mind how would my commands look? I have typed fastboot flash radio baseband.img. I get the error saying it cannot load the file.
Hello on the weekend that just passed my GSM RAZR's battery completely died and when I went to plug it in in the morning I was greeted with a black screen that reads:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status 0X004E)
Invalid CG OTV (CG: webtop)
I am on the cyanogenmod JB 4.2.2 and it was working fine without any issue really. I also don't think my phone is charging because it will only turn on if I plug it into and outlet. If I plug it in my computer to attempt to use RSD I just get the white light in the notification light.
So I was wondering if anyone could be of any help because this is my main phone and I am out of communication for the time being until it gets fixed.
EDIT: Forgot to mention that I can get into stock recovery by holding the volume +/- down and plugging it into a wall charger but any option I select brings me back to a similar screen, sometimes missing the errors the other screen had at the bottom.
Çözümü için herhangi bir XT910 yada XT912 (cihazına göre) Gingerbread temelli bir rom'un içerisinden webtop_signed.img dosyasını çıkarın ve aşağıdaki komutla flashlayın.
fastboot flash webtop webtop_signed.img
http://motomodtr.forumcommunity.net/?t=53855516
same issue
I have same problem. Please help. I don't know how to use command "fastboot flash webtop webtop_signed.img"... Where type this command?
I am on Jellybean 4.2.2, not Ginergread. Anyone else with any help? And I plugged the phone in all night last night and now it can show the menu without being on charge.
[/COLOR]
RideR10 said:
I have same problem. Please help. I don't know how to use command "fastboot flash webtop webtop_signed.img"... Where type this command?
Click to expand...
Click to collapse
flash it in using the fastboot folder, just search for the file. put the webtop file in the folder, open the command window on the folder and run the command
TheMrcool212 said:
[/COLOR]
flash it in using the fastboot folder, just search for the file. put the webtop file in the folder, open the command window on the folder and run the command
Click to expand...
Click to collapse
If it help I describe my RAZR...
I have made dual boot with boot menu manager on my razr: 1. system is stock JB 4.1.2
2.system is AOKP 4.2.2
Everything works fine until I changed bootanimation on 2. system. After reboot phone reports this issue
I download ICS 4.0.4 file, but this fastboot file doesn't contain file "webtop_signed". After that I download Gingerbread fastboot file, where I found file "webtop_signed". Will this gingerbread "webtop_signed" work with JB ?
Where can i download that "fastboot folder"?
In advance thank for your help and sorry for my ENG
http://dl.projectlense.com/download.php?file=spyder/razr_bl_mbm_0a77.zip
Download and extract this. Connect in AP and run the bat.
Gesendet von meinem XT890 mit Tapatalk 2
---------- Post added at 07:23 PM ---------- Previous post was at 07:13 PM ----------
BTW: Everyone that uses BMM and still got the 0A.6... Bootloader should update it by using the linked file, to prevent those Webtop Issues!
Gesendet von meinem XT890 mit Tapatalk 2
Thank you for your help. :good: I spent nearly two days searching for solution.
thanks alot
i had the same problem and almost threw it out the window
now fixed :good:
Help Please
Hey i have the same problem where it say " AP fastboot flash mode (S) (boot failure)" I ran the windows bat file and it restarted the bootloader but the same problem still showed. Anybody have any ideas as to what im doing wrong or what else i can do? thanks
HSD-Pilot said:
dl. projectlense. com/download.php?file=spyder/razr_bl_mbm_0a77.zip
Download and extract this. Connect in AP and run the bat.
Click to expand...
Click to collapse
Are you sure that download link not expired? The website is no more available. Any new link from anyone?
I have the same problem, after flashing Magisk 15.3 form RR Nougat OS.
What should I do?
I'v got Droid RAZER Utility 1.8 and tried to roll back to stock ICS via Fastboot but it didn't fix it, where is 'devtree' error in log.
My next attempt was to flash it with RDS Lite but it doen's work under Windows 10, to now I'm trying to manually flash firmware from RAZR XT910 Firmwares SuperThread (Jelly Bean) with Droid utility moto-fastboot.exe command.
For 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip firmware it will be:
Code:
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot erase cache
moto-fastboot erase userdata
moto-fastboot erase emstorage
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed
moto-fastboot flash cdrom cdrom_signed
moto-fastboot flash emstorage emstorage.img
moto-fastboot flash radio radio.img
But I keep getting battery low warning:
Code:
moto-fastboot flash mbmloader mbmloader.bin
sending 'mbmloader' (42 KB)... FAILED (remote: Battery Low)
How to charge MOTO if I can't get to system and recovery, I'm not sure if it's charging on fastboot screen.
vkmaxx said:
My next attempt was to flash it with RDS Lite but it doen's work under Windows 10, to now I'm trying to manually flash firmware from RAZR XT910 Firmwares SuperThread (Jelly Bean) with Droid utility moto-fastboot.exe command.
For 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip firmware it will be:
But I keep getting battery low warning:
How to charge MOTO if I can't get to system and recovery, I'm not sure if it's charging on fastboot screen.
Click to expand...
Click to collapse
Buy or make the factory cable...
https://forum.xda-developers.com/showthread.php?t=1077414
I was able to flash my phone with moto-fastboot.exe by NOT executing "moto-fastboot reboot-bootloader". This was the moment when after reboot phone was showing "low battery" warrning. After taking it from charger and not rebooting I was able to flash it.
Then Jelly Bean -> root -> SafeStrap - > LineageOS
I got the OTA for 5.01 but when it go through the reboot process , it shows a error. I don;t know what it is so I try to flash the sys and boot img but I can't flash them either..........
Can anyone help........
What happens when you try to manually flash them? Does fastboot devices show tablet connected?
di11igaf said:
What happens when you try to manually flash them? Does fastboot devices show tablet connected?
Click to expand...
Click to collapse
When I try to flash the boot img I got this "FAILED (remote: image error! (BootMagic check fail))"
And also when I try to flash sys img it shows
" fastboot: ../libsparse/sparse.c:143: write_all_blocks: Assertion `pad >= 0' failed.
Aborted "
Weird...
Me too
I'm having the same error as you. When I tried to update the Standart way the error appeared. I tried via sideload and It didn't work either. I tried Rooted, unrooted, both ways fail.
Anybody help please
Hi, I just got the OTA and after make a complete unroot with supersu I have the same problem, OTA error with the lay android and a red triangle.
Any ideas?
Thanks
Jarvia_STGL said:
When I try to flash the boot img I got this "FAILED (remote: image error! (BootMagic check fail))"
Click to expand...
Click to collapse
With latest version of fastboot and lrx22c rom completely unzipped I did the following and it fixed my stuck at "Google" Nexus 9 that also had the bootmagic issue:
fastboot flash bootloader bootloader-flounder-3.43.0.0114.img
fastboot reboot-bootloader
fastboot erase system
fastboot erase recovery
fastboot erase cache
fastboot erase boot
fastboot erase userdata
fastboot erase vendor
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash vendor vendor.img
fastboot flash userdata vendor.img
select hboot
factory reset
Not sure the 'fastboot flash userdata vendor.img' is needed here, but it worked so do with this info what you will.
Thank you this helped me get mine running again.
So with the help of @CodyF86 with his lovely twrp recovery I have had trouble flashing to the metro variant of this device so I found a firmware where I can flash it without messing up my modem and my LTE Metro Connection so this is for those who cannot boot up.
So first you will need to use Cody's guide on booting up twrp to along with fstab and all the other stuff on his guide before doing this.
After you did his guide now it's time for mine if you can't boot up properly and mind you the LTE works and wifi but I can't seem to find out why it feels a bit slow but anyway.
Step 1. Download this update and put it(unzip file) into your adb/fastboot folder on your computer. https://drive.google.com/file/d/1kW-FAfXccQMBMX3DuGJ_p2r0moDiCYtR/view?usp=drivesdk
Step 2. Put your phone into fastboot mode
Step 3. Flash these in order
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash oem oem.img
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
After that's done follow Cody's guide again and make sure you do it step by step and flash ONLY MAGISK 16.7
TheAmbition267 said:
So with the help of @CodyF86 with his lovely twrp recovery I have had trouble flashing to the metro variant of this device so I found a firmware where I can flash it without messing up my modem and my LTE Metro Connection so this is for those who cannot boot up.
So first you will need to use Cody's guide on booting up twrp to along with fstab and all the other stuff on his guide before doing this.
After you did his guide now it's time for mine if you can't boot up properly and mind you the LTE works and wifi but I can't seem to find out why it feels a bit slow but anyway.
Step 1. Download this update and put it(unzip file) into your adb/fastboot folder on your computer. https://drive.google.com/file/d/1kW-FAfXccQMBMX3DuGJ_p2r0moDiCYtR/view?usp=drivesdk
Step 2. Put your phone into fastboot mode
Step 3. Flash these in order
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash oem oem.img
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
After that's done follow Cody's guide again and make sure you do it step by step and flash ONLY MAGISK 16.7
Click to expand...
Click to collapse
I keep getting cannot open error. any help would be greatly apprecciated
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone. ☺☺☺
flamedrops said:
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone.
Click to expand...
Click to collapse
Could you explain? My phone is stuck at fastboot and my pc doesn't detect the phone.
if u could access your phone via fastboot / adb then it wasn't a hardbrick , just a softbrick
TahmidZee said:
Could you explain? My phone is stuck at fastboot and my pc doesn't detect the phone.
Click to expand...
Click to collapse
You should check first the driver of your computer. Make sure you have the driver of your phone to your computer. After that you can check your device via adb by using commnd on cmd "adb devices".
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
VERY VERY THANX A LOT MAN...THX THX THX:highfive:
flamedrops said:
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone.
Click to expand...
Click to collapse
Can u please explain it. I am stuck with the same problem. I got success in flashing fastboot rom via miflash tool but it's still stuck in fastboot.
Thanks God Bless You.
---------- Post added at 05:01 PM ---------- Previous post was at 04:36 PM ----------
Deaddo6 said:
VERY VERY THANX A LOT MAN...THX THX THX:highfive:
Click to expand...
Click to collapse
This Helped You guys are angel
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
I have the same problem. I tried also this one, but nothing.
Everything goes ok in CMD, but when I type:
fastboot boot twrp.img
I get:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
I still can't go in Recovery, neither turn off the phone. How solve this?!
dix93 said:
I have the same problem. I tried also this one, but nothing.
Everything goes ok in CMD, but when I type:
flash boot twrp.img
I get:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
I still can't go in Recovery, neither turn off the phone. How solve this?!
Click to expand...
Click to collapse
flash boot twrp.img?
What do you wanna do?
If you want to boot into TWRP it should be
Code:
fastboot boot recovery "name-of- recovery.img"
If you want to flash TWRP it should be
Code:
fastboot flash recovery "name-of-recovery.img"
Your command
fastboot flash boot twrp.img should flash the recovery image over the boot image?
If you want to boot into twrp you should use the command above.
As far as I know not every device/firmware is able to boot into TWRP. It seems other users were able to do so with a mi 9t so my advice would be:
- Try another usb port / cable.
- Check twice if you renamed the twrp image correctly
- Try another twrp version (older one or unofficial)
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Wolfcity said:
flash boot twrp.img?
What do you wanna do?
If you want to boot into TWRP it should be
Code:
fastboot boot recovery "name-of- recovery.img"
If you want to flash TWRP it should be
Code:
fastboot flash recovery "name-of-recovery.img"
Your command
fastboot flash boot twrp.img should flash the recovery image over the boot image?
If you want to boot into twrp you should use the command above.
As far as I know not every device/firmware is able to boot into TWRP. It seems other users were able to do so with a mi 9t so my advice would be:
- Try another usb port / cable.
- Check twice if you renamed the twrp image correctly
- Try another twrp version (older one or unofficial)
Click to expand...
Click to collapse
Thank you. Actually I was confused in the transcript here, I meant fast boot instead of flash.
But I figured out to use XiaomiFlash Tool to install a ROM via fastboot, and then reinstall a recovery.
The popup camera is not working good with the XIAOMI official rom (It tries to close the cam even if it is already closed). Now I'm trying to install Havoc OS to try to solve those problem, but it demands me the miui v11.0.4 or new (error in twrp), even if I have the miui v12.... trying to figure out why
for the guys whome are stuck on fastboot, you may try "XiaoMiTool V2". this bought my Mi9T from fastboot to life.
make sure all the drivers are installed as well. what's better is install usb drivers, reboot computer, enable usb debugging, connect the phone to computer, select transfer data, wait till the computer completely setup your phone, turn off phone and connect to computer, wait till computer detects and setup, put the phone on fastboot mode and connect, check whether computer shows android device... once everything are confirmed then proceed with flasing.. :good::good:
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
This command - fastboot flash vbmeta worked.
(using a version from Redispade for Grus - mi9se)
Unbricked my bootloop (recovery) after upgrading from miui 12 (android 10) to 12.5 android 11.
thanks!