Hi
I just got Galaxy S2 att but I am in Europe, and since I don't use phone only for calls & sms I wonder if there is an option to permanently set phone to use GSM only?
I know the trick with ...4636... menu, where I can set to use gsm, but when I restart my phone it goes back to umts again.
Is there some hack to open that menu in "mobile networks" or should I use international rom?
I'd find what db it edits when you do that then make init.d script to make that edit every time you boot.
Sent from my SGH-I777 using Tapatalk
jivy26 said:
I'd find what db it edits when you do that then make init.d script to make that edit every time you boot.
Sent from my SGH-I777 using Tapatalk
Click to expand...
Click to collapse
can you explain me how to do it?
thanks
The phone should technically revert to edge. You see the phone by default is set to 3g prefered meaning in these situations in which roaming in another country and the frequency bands do not match or cannot find 3g in the area that in which your phone uses "att". It would in this case revert to a lower spectrum until it finds one your phone uses. So in this case it should be automatically reverting to edge when you hopped off the plane, boat, canoe, whatever.
gotjpeg said:
The phone should technically revert to edge. You see the phone by default is set to 3g prefered meaning in these situations in which roaming in another country and the frequency bands do not match or cannot find 3g in the area that in which your phone uses "att". It would in this case revert to a lower spectrum until it finds one your phone uses. So in this case it should be automatically reverting to edge when you hopped off the plane, boat, canoe, whatever.
Click to expand...
Click to collapse
I have 3g signal but it's love, and i have seen posts that 3g uses more battery, so since i don't use data i want be able to force phone to use gsm only.
I have tried *#*#4636#*#* but it won't switch to gsm, stays at 3g.
I got the same problem, dude. Still find no way...Using UNNAMED 2.2.1...
You can check you wireless setting menu--> Mobile network to see if there is an option for you to choos Use 2G only.
czbhs1986 said:
I got the same problem, dude. Still find no way...Using UNNAMED 2.2.1...
You can check you wireless setting menu--> Mobile network to see if there is an option for you to choos Use 2G only.
Click to expand...
Click to collapse
unfortunately there is no option to choose 2g because that menu option is gray, i can't even open it.
i am also using unnamed 2.2.1
Try *#2263# and in menu choose gsm only, then it will use only gsm network. Bu again, when you restart the phone it goes back to umts
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Related
I don't get good 3G at my house and when I'm on edge in get almost full bars. How can I shut off 3G/4g? I did the 4636 thing and selected gsm only but I still see h+. What am I doing wrong ? Is there another way? App?
When change it I just back out by the back button...is there a diffremt way I should do it to save the gsm settings only?
Thanks
dvigue said:
I don't get good 3G at my house and when I'm on edge in get almost full bars. How can I shut off 3G/4g? I did the 4636 thing and selected gsm only but I still see h+. What am I doing wrong ? Is there another way? App?
When change it I just back out by the back button...is there a diffremt way I should do it to save the gsm settings only?
Thanks
Click to expand...
Click to collapse
Ok .. sigh... first off... the "bars" you are referring to indicates cell strength(voice calls/SMS) not data speed or strength. I think the atrix shows h+ no matter what as on my nexus it would change to H when using hsdpa and 3g for when on 3g and likewise for edge and even g **edit that's a cyanogen mod**. NOW as for switching to 2g only and disabling 3g it is ( settings> wireless & networks> mobile networks> select network = your choice) no need for *#*#4636#*#*
On another note if your getting slowdown on 3g try a restart... 2g is not going to be any faster.
Sent from my Xoom using XDA App
Besides going through the different setting menus, there are widgets available in the market that will act as a shortcut to the last (or semi-last) preference. I have it configured in Extended Controls
ChongoDroid said:
Ok .. sigh... first off... the "bars" you are referring to indicates cell strength(voice calls/SMS) not data speed or strength. I think the atrix shows h+ no matter what as on my nexus it would change to H when using hsdpa and 3g for when on 3g and likewise for edge and even g **edit that's a cyanogen mod**. NOW as for switching to 2g only and disabling 3g it is ( settings> wireless & networks> mobile networks> select network = your choice) no need for *#*#4636#*#*
On another note if your getting slowdown on 3g try a restart... 2g is not going to be any faster.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
ok...Sigh...
i know what the bars mean. what i am saying is, i get a way better signal at home/work with EDGE. i want to be able to shut off 3g, like i use to be able to on my iphone to save battery, and i jsut dont need the connection at home and work.
i went to the settings, and mobile networks is greyed out? how can i get into that menu?
wouwout said:
Besides going through the different setting menus, there are widgets available in the market that will act as a shortcut to the last (or semi-last) preference. I have it configured in Extended Controls
Click to expand...
Click to collapse
will it shut off 3g? and just keep EDGE? i have done it manually, but it does not seem to work?
no matter how many times i go into the 4636 screen and select GSM ONLY it goes right back to GSM/WCDMA
and i am so sick of looking service when it switches over from EDGE to 3g for ONE bar. what am i doing wrong? why cant i get it to STAY on EDGE>..this no service thing is making me wonder if i want to return this phone..
dvigue said:
no matter how many times i go into the 4636 screen and select GSM ONLY it goes right back to GSM/WCDMA
and i am so sick of looking service when it switches over from EDGE to 3g for ONE bar. what am i doing wrong? why cant i get it to STAY on EDGE>..this no service thing is making me wonder if i want to return this phone..
Click to expand...
Click to collapse
Try the widget call Extended Control and disable it. Good luck
dvigue said:
ok...Sigh...
i know what the bars mean. what i am saying is, i get a way better signal at home/work with EDGE. i want to be able to shut off 3g, like i use to be able to on my iphone to save battery, and i jsut dont need the connection at home and work.
i went to the settings, and mobile networks is greyed out? how can i get into that menu?
Click to expand...
Click to collapse
I forgot that I had to unlock my phone for it to work (canada, go figure) maybe thats why mine isn't greyed out.
Sent from my Motorola Olympus
After selecting 2g only mode, my Atrix still gets 4g speeds...
I am running the same phone under AT&T with 4.5.141. I rooted the phone and enabled the greyed out preference pane to select 2g only. Regardless of if I select 2g only there, and if I use the *#*#4636#*#* code, I can run speedtest and get 4g speeds .... Do I just need to go the cyanogen mod? Are there other preference panes that I need to edit? I am jealous of all of you out there who have successfully whipped their Atrix 4g!
Motorola Atrix 4g (v1) AT&T with 4.5.141
You will have to flash the n_1.100.00r radio
Sent from my MB860 using xda premium
hello all,
about two weeks ago a flood came through pa and ever since that flood came through the tower by my house is putting off a "bad 4g" or "h+" signal, which my atrix is forced to used, when i make a phone call the atrix drops down to 3g and i can get on the internet no problem and i can get on any other tower no problem, i called att about the problem and they said the tower by my house is in a degraded state and they don't know how long it will be before it gets fixed, to me it doesnt seem to be a priority since the problem only affects those who's phones use the bad h+ signal. I know the phone would function fine if there were some way to drop the phone down to 3g or edge as my wifes captivate works off the sme tower no problem. I have tried the #*#*4636*#*# option - gms blah blah and it didnt do anything to change the h+, i even figured out how to modify the settings under etc/motorala/android.phone/settings.xml to get the network settings ungreyed only to find out that changing the settings to 2g or 3g did nothing to change the h+ symbol, i am running stock rom 2.3.4 att, one thing i did noticed don't know if it is related but the apn's are locked, do i need to unlock my phone to force edge? those of you who have atrix and are able to force edge please let me know how you are able to and weather or not your phone is locked. if at all possible i would like to avoid flashing roms but would be willing to unlock my phone if it goves me the ability to force edge. this is ridicous that att would lock this option out. please help me as having no internet on my phone sucks
*#*#4636#*#* -> phone information -> set preferred network type to -> GSM only -> Press back button to exit out of it.
Do not attempt to change anything else.
anupash said:
*#*#4636#*#* -> phone information -> set preferred network type to -> GSM only -> Press back button to exit out of it.
Do not attempt to change anything else.
Click to expand...
Click to collapse
i Tried that and it did not change the h+ down to edge and when i go back in it is set back to gsm auto/ are your apns unlocked or phone unlocked if this actually does work for you?
apn wap.cingular and set to use 2g only. wap.cingular is edge. hsdpa will be 3g speeds.
i know i thought of that too, except att has locked all of their apns they have a little lock next to them? any one know how to remove the locks or is this the same thing as unlocking the phone?
voltmeter101 said:
i know i thought of that too, except att has locked all of their apns they have a little lock next to them? any one know how to remove the locks or is this the same thing as unlocking the phone?
Click to expand...
Click to collapse
Add a new apn and select it. You can only have one active at any time anyways.
Sent from my MB860 using xda premium
Alcapone263 said:
Add a new apn and select it. You can only have one active at any time anyways.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
There isn't a 2G option in APN settings.
Someone had success installing toggle 2g in gingerbread At&t rom?
I already tried, but didn't work.....
Dev of the software only guarantee on CM6 and CM7 but I dont want to install this rom, due to lack of resources (webtop, fingerprint, etc).......
Someone can help?
Sent from my MB860 using XDA App
From what I understand based on the CM7 issue list, switching to 2g in the US is not working because of AT&T. You apparently have to call and enable it.
Here in Brazil it works...I can switch manually between GSM Only, Automatically or 3G Only.....but this app called Toggle 2G can do it automatically when we put in sleep mode....it's better because save much battery.....
Sent from my MB860 using XDA App
bilbert said:
From what I understand based on the CM7 issue list, switching to 2g in the US is not working because of AT&T. You apparently have to call and enable it.
Click to expand...
Click to collapse
have you called and enabled this on your phone, i am curious if you have it working and what you asked them to enable?
On my stock AT&T which I'm using here in Oz,
Settings->Wireless & Networks->Mobile networks->Select network was disabled and wouldn't let me change it.
Take a look at http://forum.xda-developers.com/showpost.php?p=14494826&postcount=24
Now all the toggle apps work.
sacah said:
On my stock AT&T which I'm using here in Oz,
Settings->Wireless & Networks->Mobile networks->Select network was disabled and wouldn't let me change it.
Take a look at http://forum.xda-developers.com/showpost.php?p=14494826&postcount=24
Now all the toggle apps work.
Click to expand...
Click to collapse
I saw this thread before and even got the options ungreyed, yet selecting 2g changes nothing here in us
Well, I have not used that app, but *#*#4636#*#* then phone info, and then preferred network should work.
Is what I always do in areas with poor 3G coverage. I switch to GSM. And vice verse, in areas with good 3G coverage I set it to WCDMA only.
Sorry, I didn't realise OP had already unlocked the 'Select network' menu and it works.
I didn't find an app that would toggle 2g/3g automatically on a stock ROM. I just installed the 2G-3G OnOff widget that's a shortcut to the 'Select network menu, and I manually toggle it when in bad signal area.
I couldn't install it on my german Atrix with french stock rom. After installing the Toggle2G-Update.zip with CWM the app simply doesn't appear in the drawer.
Those of you who were successful, what did you do?
Thanks!
No root required*
This is pretty simple, go to the dialer and enter;
*#*#4636#*#*
Click on Phone Information
Scroll down to Set preferred network type
Select that one that you want
hit back
My phone kept switching to edge because the wcdma signal in my area is very low but 3 bars of edge is worse than 1 bar of hsdpa+ (no lte in enterprise al) so I choose wcdma only and I always have signal. You can set preferences or choose certain signals only but be aware if you change to a specific signal only and it's not there you will loose service... If you ever need to reset the settings and can't remember the code removing the sim card and reinstalling it resets back to default.
Here's where I found this I take no credit but I can confirm it works on the at&t version of the One.
http://forum.xda-developers.com/showthread.php?t=1636345
Does AT&T version not have the same Mobile Data menu as T-Mobile?
Sent from my HTC One using Tapatalk 2
I don't have that option on my captivate glide.
Sent from my Nexus 7 using xda app-developers app
babe1 said:
I don't have that option on my captivate glide.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I don't think the captivate glide even has lte...
Sent from my HTC One using Tapatalk 4 Beta
Nick281051 said:
I don't think the captivate glide even has lte...
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
I thought I saw it in the user manual. Looking at tech specs, no LTE. I read this thread because I wanted to disable Edge, I would rather have no data connection at that time then the frustration of NOTHING connecting on edge.
babe1 said:
I thought I saw it in the user manual. Looking at tech specs, no LTE. I read this thread because I wanted to disable Edge, I would rather have no data connection at that time then the frustration of NOTHING connecting on edge.
Click to expand...
Click to collapse
Idk it should have something very similar to that menu but I've never had the device so I don't really know.
Sent from my HTC One using Tapatalk 4 Beta
That menu is disabled on the at&t variant.
Nick281051 said:
Idk it should have something very similar to that menu but I've never had the device so I don't really know.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
This is all I get.
Awesome! I just got mine today (Australian version) and don't have the mobile carrier menu, which I think is ridiculous. This did the trick for me to disable LTE
This is the procedure I have used to disable LTE after finally figuring out that my "missed calls with no notification whatsoever" issue (unless caller leaves a VM) was caused by having LTE enabled. Something to do with the One having to switch to HSDPA for voice and the handoff not working right. Sucks not using LTE but I can't be missing calls....
Works a treat, too bad we have to dive into a Service Menu to choose our network preferences.... Thanks ATT...
Sent from my HTC One using xda app-developers app
2rz_taco_sr5 said:
That menu is disabled on the at&t variant.
Click to expand...
Click to collapse
Not on mine, I use it all the time (on ATT, stock)
I installed an app that takes me right to the service menu so I don't have to use the dialer each time.
bosotros said:
Not on mine, I use it all the time (on ATT, stock)
I installed an app that takes me right to the service menu so I don't have to use the dialer each time.
Click to expand...
Click to collapse
Great what's the app? Although i know the numbers by heart now lol.
2rz_taco_sr5 said:
Great what's the app? Although i know the numbers by heart now lol.
Click to expand...
Click to collapse
It's called LTE OnOff - HTC Thunderbolt
disable lte ram dump
for those looking for a way to do this and not know how....go to google play store, and download the app. (Advance Tools Pro). in the menu under special settings,you will see phone information. enter here and scroll down and you will see all your looking for...no need for root.
2rz_taco_sr5 said:
No root required*
This is pretty simple, go to the dialer and enter;
*#*#4636#*#*
Click on Phone Information
Scroll down to Set preferred network type
Select that one that you want
hit back
My phone kept switching to edge because the wcdma signal in my area is very low but 3 bars of edge is worse than 1 bar of hsdpa+ (no lte in enterprise al) so I choose wcdma only and I always have signal. You can set preferences or choose certain signals only but be aware if you change to a specific signal only and it's not there you will loose service... If you ever need to reset the settings and can't remember the code removing the sim card and reinstalling it resets back to default.
Here's where I found this I take no credit but I can confirm it works on the at&t version of the One.
http://forum.xda-developers.com/showthread.php?t=1636345
Click to expand...
Click to collapse
How long will this maintain your selected network? I've used this many times on past phones, but carrier settings have frequently reverted the setting automatically. at the least, it will reset itself on boot (which isn't necessarily that big of a deal, unless you're Dev-ing and rebooting frequently.). If rooted, there are a number of ways to be able to easily select your desired connection type and have it stick. glad to hear this has worked for your needs so far.
fitchpuckman said:
How long will this maintain your selected network? I've used this many times on past phones, but carrier settings have frequently reverted the setting automatically. at the least, it will reset itself on boot (which isn't necessarily that big of a deal, unless you're Dev-ing and rebooting frequently.). If rooted, there are a number of ways to be able to easily select your desired connection type and have it stick. glad to hear this has worked for your needs so far.
Click to expand...
Click to collapse
It will revert back after air plane mode/disabling data and on restarts. I just use the app if I notice I'm on edge which is rare and pretty obvious. This is my first smart phone ever since my htc excaliber windows phone that I haven't run unofficial software on. it's just a great package and I feel I'll deal with more issues rooted than I do stock. Can't wait for 4.3 next week the ONLY thing I miss is battery percentage in notification bar lol
I would like to have WCDMA/GSM (auto), but that option is not present.
I'm guessing WCDMA preferred would do the trick? I currently have GSM/WCDMA/LTE auto but I don't use LTE..
2rz_taco_sr5 said:
It will revert back after air plane mode/disabling data and on restarts. I just use the app if I notice I'm on edge which is rare and pretty obvious. This is my first smart phone ever since my htc excaliber windows phone that I haven't run unofficial software on. it's just a great package and I feel I'll deal with more issues rooted than I do stock. Can't wait for 4.3 next week the ONLY thing I miss is battery percentage in notification bar lol
Click to expand...
Click to collapse
You don't have an option in Settings>Power to "Show Battery Level (Show batterly level in status bar)"?
calanizzle said:
I would like to have WCDMA/GSM (auto), but that option is not present.
I'm guessing WCDMA preferred would do the trick? I currently have GSM/WCDMA/LTE auto but I don't use LTE..
Click to expand...
Click to collapse
Here's a little trick for anyone that's rooted - If you want to be able get the Preferred network mode list when selecting Settings>Mobile Data>Network Mode, you have to change your sku ID in /system/customize/ACC/default.xml. Using a text editor (I always just use the text editor built in to Root Browser), find
Code:
<item type="integer" name="sku_id">7</item>
almost at the end. 7 is ATT's sku, and gives you things like ATT's Data Icons and lying signal bars, but will also enable the NFC icon in the status bar when it's on and remove the Preferred Network mode from Settings. Changing this to 11 will set it as TMobile - Tmo data icons and other tmo settings (I believe T Mobile has the Preferred Network mode settings as well). Changing it to 42 will set it with WWE device settings, so you'll get generic HTC data icons, signal bars that actually work, network mode settings, etc. Obviously Save and Reboot after making the change.
homeslice976 said:
You don't have an option in Settings>Power to "Show Battery Level (Show batterly level in status bar)"?
Click to expand...
Click to collapse
Well as of last night I do. I'm running stock and 4.3 just dropped last night for att customers. Until last night I was on 4.1.2 which does not have percentage.
2rz_taco_sr5 said:
Well as of last night I do. I'm running stock and 4.3 just dropped last night for att customers. Until last night I was on 4.1.2 which does not have percentage.
Click to expand...
Click to collapse
i want to set my network settings to 2G only, what setting should i use? GSM Auto or GSM Only? Also, does changing these 2G/3G/LTE settings by dialing *#*#4636#*#* have any effect on anything else besides the network mode?
Hey guys, I have a few questions that I need to get resolved which MAY help in getting LTE Working solid on Verizon One maxes for those who Have T-Mobile, but I would like to confirm that T-Mobile LTE does work on the Verizon one Max. You don't need to flash ANY special Radios. You can even use Verizon's Latest Radios and it works. All that needs to be done is use *#*#4636*#*# to change the preferred network type to GSM/WCMDA/LTE and boom, it works. The Problem I am having is that you have to switch to GSM Only first, just to get it to Work on T-Mobile before you switch to GSM/WCDMA/LTE. Another problem is that when you reboot once or Twice, my radio keeps on going crazy Rapidly switching from No Service to T-Mobile and Back. I go back into *#*#4636*#*# and I see that it changed to EvDO+CMDA/LTE Mode. I would have to go back and switch to GSM only to fix the problem then back to GSM/WCDMA/LTE Mode to connect to the network again. And yes I have the fast.T-Mobile.com APN Already inputted. This is with both Verizon and Sprint Sense 5 or 6 Roms. So we know LTE works on T-Mobile with the Verizon HTC One Max, But it won't stick. However, I decided to Flash a Cyanongen 11 Rom to the One Max, I am able to go System > Mobile Networks > Preferred Network Type and switch it to GSM/WCDMA/LTE, Reboot, then go into dialer and enter *#*#4636#*#* and Switch to LTE/GSM auto (PRL) and it works flawlessly. No matter how many times I restart, I still instantly connect to T-Mobile's LTE Network. Texting and MMS works with no issue. So what I think the issue is that On Sense roms there is only 6 Different Preffered Network types to choose from but on the Cyanongen 11 Rom, there are over 15. Also, On Sense ROMS there is only a GSM/WCDMA/LTE type with no Auto and I think that's the issue. There is no LTE/GSM auto (PRL) Selection in Sense roms. Because when I choose GSM (auto) on Sense, I can connect to HSPA, 3G, and EDGE with no issues. So I am asking for some help in How can we get more Preferred network type selections under *#*#4636*#*#. Or is there some scripts we can change with the current ones that resemble a LTE/GSM auto (PRL) Selection. But I think that is the culprit in Getting LTE fully working.
And just to Confirm that LTE is working on HTC One Max Verizon Version.
Even when I put my phone in wcdma/gsm/lte my service stays outputting no signal. Even when I reboot it stays like that until I change the network mode.
I wish t mobile released a one max so we could get WiFi calling
Sent from my HTC0P3P7 using XDA Free mobile app
I have come to use xposed module Intelli3G to auto select the network. It has to be set to you liking of network chose.
I'm trying to do this too. But the roms I have tried so far won't let me get into *#*#4636#*#*. What Rom did you use to get into it?
snyper2k2 said:
I'm trying to do this too. But the roms I have tried so far won't let me get into *#*#4636#*#*. What Rom did you use to get into it?
Click to expand...
Click to collapse
I am using NuSenseSIX-KitKat Rom. If you cant get into the Settings, Download Network App from the app Store.
jerrycycle said:
I have come to use xposed module Intelli3G to auto select the network. It has to be set to you liking of network chose.
Click to expand...
Click to collapse
This does seem to fix one of the Issues, but I am getting Signal Dropouts on LTE when going from Tower to Tower and have to turn on and off Airplane Mode to get it working agian. Do you ever experience this issue?
I don't have to use airplane mode to regain a signal. In my area T-Mobile has spotty signal strength. That is one reason I use LTE but only when signal is fair to good and for long video streaming. Hspa+ for me is better on battery and suffice for Tapatalk, email, mms, market downloads, apk even short videos, etc. I stream more on the weekend because it football season.
theslimed2013 said:
This does seem to fix one of the Issues, but I am getting Signal Dropouts on LTE when going from Tower to Tower and have to turn on and off Airplane Mode to get it working agian. Do you ever experience this issue?
Click to expand...
Click to collapse
I get these drops too.Mainly when I switch wifi off or on.
Any way to get this to work on a spint variant . I really don't think it's hard ware.. and more of soft ware.. please chime in if you Have any suggestions thanks in advance
Sent from my HTC0P3P7 using XDA Free mobile app
jraz305 said:
Any way to get this to work on a spint variant . I really don't think it's hard ware.. and more of soft ware.. please chime in if you Have any suggestions thanks in advance
Sent from my HTC0P3P7 using XDA Free mobile app
Click to expand...
Click to collapse
I use to Have a Sprint One Max with it Unlocked as well and I only got HSPA+ Speeds with it. I never Went about getting LTE to work because I though it didn't have the Compatible Radio inside of it. I am hearing that the Sprint Version has the Same LTE bands as the Verizon Network Uses. But I would try to go into you *#*#4636#*#* (or Download Network from the Play Store) And try switching your preferred network to GSM/WCDMA/LTE and see if it works. Make sure, that your APN Is set to the Fast.t-mobile.com One also. That is all I did to get it to work on the Verizon Version.
snyper2k2 said:
I get these drops too.Mainly when I switch wifi off or on.
Click to expand...
Click to collapse
Same here. Also, I tried switching bands and it did seem to fix the Problem, However it prevents me to Call out or Receive Calls because usually when making or Receiving a Call, the LTE Band goes back to 3G/H/H+ because T-Mobile hasn't Activated VoLTE yet. But it is good to know that LTE does work but it's not really Stable and Global Phone Friendly. The Problems really happen when Driving around or Going from Tower to Tower. Signal goes from perfect to NULL and just stays at 1 or 0 Bars no matter where you go. And you either have to Restart the Phone, Turn the Radio off then on, or Just simply Turn on and Off Airplane Mode to fix it. So I am just using WCMDA or GSM Only for the time being and I don't really want to go to a AOKP CM11 Rom because most of the Features I use aren't there. And just to Clarify, Switching/Flashing Radios and basebands does NOT Fix the problem. I have tried All sorts of Radios, even from T-Mobile HTC One Phones and just doesn't work.
I had used the steps in the link pasted under this to get my LTE working perfectly on the stock Verizon ROM with Sense 5.5 but after upgrading to Sense 6 these changes have caused some issues. The changes worked fine for a day but then the second day mobile data stopped and nothing I did could bring it back. I ended up having to flash a stock rom RUU to get mobile data to come back. I'm not sure why the data stopped on the second day, I may have been from other changes I made to dpi or adding on screen buttons or re-locking the bootloader to use the fingerprint scanner. For now I'm just using gloabal mode which gets me good 3G till I re-gain my courage to try modifying the settings to get the LTE again.
http://forum.xda-developers.com/showthread.php?t=2538998
Hey message me .. I have a Sprint variant .. what radio did u try ... To get lye working from another Carrier I want to try .. to flash another radio on my Sprint variant with a Verizon radio and see if I can get it to catch lte but for fear of loseing my GSM don't want to do it . Thanks in advance
Sent from my HTC0P3P7 using XDA Free mobile app
help not rooted
I've done everything you said step by step and still only EDGE works I've networks and telinfo I'm currently on family mobile