Hello all
Im new to this but hope someone can help. I have a HTC EVO 3d and trying to remove files from nvm folder but i get a error 222 and it will not move out of the location so that i can edit the file and replace it. red circle is gone. and i have access but cant copy the file to the computer or even copy on the phone.
Now this is what i have the phone has hboot 1.5 and 2.3.4 not rooted yet as told did not need to. is the reason that i do not have acces is that the hboot is 1.5 and not rooted will i need to downgrade and if so how can i thanks hope someone can help been on this for days.
storres6981 said:
Hello all
Im new to this but hope someone can help. I have a HTC EVO 3d and trying to remove files from nvm folder but i get a error 222 and it will not move out of the location so that i can edit the file and replace it. red circle is gone. and i have access but cant copy the file to the computer or even copy on the phone.
Now this is what i have the phone has hboot 1.5 and 2.3.4 not rooted yet as told did not need to. is the reason that i do not have acces is that the hboot is 1.5 and not rooted will i need to downgrade and if so how can i thanks hope someone can help been on this for days.
Click to expand...
Click to collapse
first question would be "what does this have to do with qpst?" next i would tell you, you cant copy anything to the "root" folders of the phone with out it being rooted. so root your phone using the htcdev.com method first.
now what i think you're talking about is getting your msl code. call sprint and have them do a master reset on your phone and they'll give it to you. its a lot easier than following that guide.
EFS Exployer
OK thanks for the reply
i did not wont to put to much info here that will ba**** me so let me rewrite this im using efs exployer to get in the files folder nvm/num to edit file # 0 & 1947 i believe and i have the problem of error 222 when i try to copy the files to the desktop so that i can edit the *** & **** on the files and then copy them back on the phone. is there a reason why it gives me that error. is there something i have to do
not sure why it wont let you copy the file. but you're still going to need to be rooted to flash to another carrier
can it be something with the sdk files that maybe i need something there to be installed that will give me access im used windows xp and windows 7 64 bit both give me the same error code 222 on the evo 3d and evo 4g the 4g is rooted and i still get the same error dont understand i did one without rooting the phone and not using efs just doing it the long way and it worked.
storres6981 said:
OK thanks for the reply
i did not wont to put to much info here that will ba**** me so let me rewrite this im using efs exployer to get in the files folder nvm/num to edit file # 0 & 1947 i believe and i have the problem of error 222 when i try to copy the files to the desktop so that i can edit the *** & **** on the files and then copy them back on the phone. is there a reason why it gives me that error. is there something i have to do
Click to expand...
Click to collapse
btw its 0 & 1943 files, also just drag n drop the files from efs to desktop.
lastly, if you Ever plan to root...Do that Before you do what you're doing.
louforgiveno said:
btw its 0 & 1943 files, also just drag n drop the files from efs to desktop.
lastly, if you Ever plan to root...Do that Before you do what you're doing.
Click to expand...
Click to collapse
I did try to drag and drop the file but the file does not go anyway and it comes with a error of code 222 something about argument error so i rooted the 4g not the 3d and tried it with that one and still get the error. i have no clue whats wrong.
louforgiveno said:
btw its 0 & 1943 files, also just drag n drop the files from efs to desktop.
lastly, if you Ever plan to root...Do that Before you do what you're doing.
Click to expand...
Click to collapse
Also thanks for your reply greatly appreciate this
storres6981 said:
Also thanks for your reply greatly appreciate this
Click to expand...
Click to collapse
no prob...are you using QPST version 2.7.366 ?
louforgiveno said:
no prob...are you using QPST version 2.7.366 ?
Click to expand...
Click to collapse
Yes im using that version
how about right click >copy >paste ? No go?
you're in diag mode right... ##diag# ?....restarted phone & qpst after making "O.S.F" folder ?
Something is being missed.
Ya im in diag mode debugging is on i have the spc its 0000000 out and the os folder is ther no red circle can see the file there are red also try to drag does not go anywhere try to copy and paste gives me the error code 222 I have restarted the phone and even reset the phone to factory ##786# and still same issue and i have it on 2 phones also went to and other pc and see maybe its the computer but same issue weird.
louforgiveno said:
how about right click >copy >paste ? No go?
you're in diag mode right... ##diag# ?....restarted phone & qpst after making "O.S.F" folder ?
Something is being missed.
Click to expand...
Click to collapse
I open efs and read phone enter 0000000 for spc then i made new directory osf then i write to the phone. after that i restart the phone the reconnect to efs then i see the folder open nvm/num then i try to copy and no luck just and error. hope im not missing a step that i need.
purchase cdma workshop
must be version 3.8 or later so dont try to pirate it
you wont find the latest version
change esn and and meid with ease
profit????
storres6981 said:
I open efs and read phone enter 0000000 for spc then i made new directory osf then i write to the phone. after that i restart the phone the reconnect to efs then i see the folder open nvm/num then i try to copy and no luck just and error. hope im not missing a step that i need.
Click to expand...
Click to collapse
000000 is not the spc....That is what's in the spc field by default 00000...You need to enter the unique SPC for your phone....If it were rooted you could get MSL READER from the market...SPC=MSL..same thing.....Not being rooted you can get SPC/MSL with CDMA WS.
louforgiveno said:
000000 is not the spc....That is what's in the spc field by default 00000...You need to enter the unique SPC for your phone....If it were rooted you could get MSL READER from the market...SPC=MSL..same thing.....Not being rooted you can get SPC/MSL with CDMA WS.
Click to expand...
Click to collapse
I changed the spc with cdma should i change it back to the original spc maybe thats the problem.
twiztidninja said:
purchase cdma workshop
must be version 3.8 or later so dont try to pirate it
you wont find the latest version
change esn and and meid with ease
profit????
Click to expand...
Click to collapse
is there some place i can get this program cheaper them 99 dollars.
Ok, this thread stinks of rule #9 violations.
You can try to "mask" your request, but hacking ESN numbers isn't legal in many countries, so we won't allow this kind of discussion here.
Related
SMS (Short Messege Sevice) AKA Text Messege
Hello I'll make this short. For those who where having SMS issue when flashing new roms. Meaning you read the messege and didnt tougle up or down to select new text leading to manila saying you still have 2 messege unread. And in reality you already read them but the notice never cleared. To fix this issue you had to either highlight the bold text to clear it, or you could have switched off of threaded messeges. The problem come from a dll file called htmlhome. This file can be located in the windows dir and I am supplying a working dll file that I test myself and has removed this annoying bug for me so enjoy.
htmlnotetextmessegefix.zip
Here is how to install, with total comander unzip into the windows dir and soft reset. Test and you will see that it works
ps. I have a at&t fuze so please make sure you back up your original if this doesnt work for you.
UPDATE CAB VERsion
htmlnotetextmessegefix.cab
have not tested but same file, dont know if its unistallable, so be safe and back up, if you try this fix say thanks it will help those who are not aware there is a fix
how do you "Unzip" in TC? i know how to zip, but unzip?
Gundem said:
how do you "Unzip" in TC? i know how to zip, but unzip?
Click to expand...
Click to collapse
open "TC", go to folder where file was saved, double click on file, select and hold dll file till sub menu pops up, select unzip, click Tree option, select windows folder (windows folder on your device not storage card) click ok, and click ok. let me know if you need more help.
i think i just screwed myself...I'm in SMS/MMS screen and can't do anything. i select reply at the bottom of the screen and nothing happens...and i receive Texts (phone vibrates and does the new text sound) but nothing show sup in my inbox...oh no.
Gundem said:
i think i just screwed myself...I'm in SMS/MMS screen and can't do anything. i select reply at the bottom of the screen and nothing happens...and i receive Texts (phone vibrates and does the new text sound) but nothing show sup in my inbox...oh no.
Click to expand...
Click to collapse
not a problem, i dont know how this happene??? it worked fine for me. is anyone else having this issue would be great. when posting bugs can you specify if you tried other software prior to the fixs? what model phone ar you runningand is it a custom rom? dll files can be tricky but as long as you followed my directions you will be fine. i would suggest you do a clear storage and before you apply any other dlls try the one i posted and reply to this thread to see if you duplicate that error.
Hey, I just wanted to thank you for this fix. Its working fine on my AT&T fuze. No problems at all.
guevr001 said:
not a problem, i dont know how this happene??? it worked fine for me. is anyone else having this issue would be great. when posting bugs can you specify if you tried other software prior to the fixs? what model phone ar you runningand is it a custom rom? dll files can be tricky but as long as you followed my directions you will be fine. i would suggest you do a clear storage and before you apply any other dlls try the one i posted and reply to this thread to see if you duplicate that error.
Click to expand...
Click to collapse
i fixed it (the SMS problem) i sprite back up'd everything but the htmlhome.dll folder, then hard reset, then restore. so its fixed now.
I'm running Fuze, RC3 Rom and am scared to do this again.
Gundem said:
i fixed it (the SMS problem) i sprite back up'd everything but the htmlhome.dll folder, then hard reset, then restore. so its fixed now.
I'm running Fuze, RC3 Rom and am scared to do this again.
Click to expand...
Click to collapse
oh Im happy you got it back up. I noticed you posted a question inregards to this issue in another Thread. I hope you can get it fixed I know its an annoying little bug. Well cant say I didnt post on the first thread to back up your dll file. I made a cab you can try that but its the same dll and you still need to back it up. but for the most part the files been a success. Good Luck buddy.
ps i tried the fix on the rom you asked for a fixs and it works on that one but the chef fixed it on his latest rom (currently testing without my dll fixs)
sorry wrong post
works great on my Touch Pro, thanks!
guevr001 said:
oh Im happy you got it back up. I noticed you posted a question inregards to this issue in another Thread. I hope you can get it fixed I know its an annoying little bug. Well cant say I didnt post on the first thread to back up your dll file. I made a cab you can try that but its the same dll and you still need to back it up. but for the most part the files been a success. Good Luck buddy.
ps i tried the fix on the rom you asked for a fixs and it works on that one but the chef fixed it on his latest rom (currently testing without my dll fixs)
Click to expand...
Click to collapse
thanks for hard work man.
i will back up and give it a try when i get home today. The cab can be in the root folder right? (Just being cautious)
@[email protected]
Did you run the cab?
Gundem said:
thanks for hard work man.
i will back up and give it a try when i get home today. The cab can be in the root folder right? (Just being cautious)
@[email protected]
Did you run the cab?
Click to expand...
Click to collapse
yeah back up your htmlnote.dll file somewhere out side of the windows folder. install to the device and it will install in the proper folder(windows)ps I didnt run it because its already fixed in the rom I am useing but it would be a good idea to keep this cab handy if you ever need it again
guevr001 said:
yeah back up your htmlnote.dll file somewhere out side of the windows folder. install to the device and it will install in the proper folder(windows)ps I didnt run it because its already fixed in the rom I am useing but it would be a good idea to keep this cab handy if you ever need it again
Click to expand...
Click to collapse
cool cool
you said you were running RC4 Beta...how is it? ETA?
right now romeos, trying to learn all the need stuff to cook my own custom rom
guevr001 said:
right now romeos, trying to learn all the need stuff to cook my own custom rom
Click to expand...
Click to collapse
oh...thought you were running the beta. i was surprised.
Gundem said:
thanks for hard work man.
i will back up and give it a try when i get home today. The cab can be in the root folder right? (Just being cautious)
@[email protected]
Did you run the cab?
Click to expand...
Click to collapse
yeap. the process went smoothly.
so, u got to tell me how to move a file that says every time i try that its write protected? i have tried everything, i want to fix my SMS problem... the TC won't find my phone and im not the admin of my fuze so i cant copy or write or over write files.... HELP.
GREAT
Thanx this work perfectly..... I was gettin annoyed by it
Unfortunately, this doesn't work in Windows Mobile 6.5. It gives you weird artifacts in the threaded message screen. So heads up if you try to install it on a 6.5 build. However, it IS uninstallable (if you use the CAB). So don't be afraid to test it out!
Thanks!
Downloaded the zip file to my desktop, then activesynced it to my phone. Opened it in File Explorer on my FUZE and used the preinstalled zip program to extract the file to the Windows folder. It asked if I wanted to replace the file and I said "yes to all." Worked immediately! Thanks!
Hi,
I have managed to lose my IMEI and empty my /efs folder. I was using the Gingerbread Beta 2 ROM provided by Whitehawkx on my Samsung Vibrant. Everything was great for me, I was loving it and was using it as daily driver. Until one day, my cell was in my pocket and I realized it was overheated. I removed it from my pocket and saw that it was frozen and had the double rainbow screen. I removed the battery to switch it off and restarted.
Since that moment, I lost all the files under my /efs folder and also lost my IMEI. As a result my phone does not recognize any SIM card. I can use all other functions like wifi, bluetooth, etc. but cannot use any phone functions like calling, sms, etc.
Please please please help me out to resolve this problem. I do not have backup of my /efs folder. I do have nandroid backups of my JFD, JI6 and KA6 ROMs. (if that helps in any way)
I have already tried going back to Stock JFD with clear efs checkbox checked using odin but no luck...
Please Help & Very Thanks in advance...
P.S. Let me know if you need any more details...
This is tricky, but it can be done, I am not sure how much your phone is jacked up. But here is a link explaining how to do this, read carefully a few times before you proceed:
http://forum.xda-developers.com/showthread.php?t=881162
Good luck
oka1 said:
This is tricky, but it can be done, I am not sure how much your phone is jacked up. But here is a link explaining how to do this, read carefully a few times before you proceed:
http://forum.xda-developers.com/showthread.php?t=881162
Good luck
Click to expand...
Click to collapse
Thanks oka1,
But before your reply I did something because of which I am screwed even more
While trying out everything, I flashed my Vibrant with the International Samsung Galaxy S ROM - 'I9000DDJF2'. I also used the CSC file that came with it.
This did not solve my IMEI problem but then now I can't go into Download mode or recovery mode as we do not have the home key that International Galaxy S has.
Please help me get in Download mode or Recovery mode so that I can get back to Vibrant ROM.
we do have a home button. use that to go to DL mode.
how come did that messed up your eds? was it told that you need to backup your efs folder?
Sent from my SGH-T959 using XDA App
Got lucky, managed to get into Download mode. Found this post 'http://forum.xda-developers.com/showthread.php?t=728698', the key was - "If you still can't enter download mode, you may want to try holding down the volume key + the power button. Plugging in your USB cable may also aid your efforts to enter download mode."
But this does not solve my lost IMEI and /efs problem. I did not know about backing up the /efs folder :-(
I am trying my hardest to try and restore my IMEI...
just get a replacement. that's the easiest way I think.
is your phone unlocked?
Sent from my SGH-T959 using XDA App
Hey Im looking now through some old threads, might have a fix.
I did that too, but luckily, after that, i bricked.
Backing up /efs will avoid any problems like this?
Potential Fix
I attached a screenshot of the files that should be in your efs folder. When I unlocked my phone, it required deleting all of the nv files besides the log, which leaves -
The .android folder is empty
The .imei file contains your imei number (found under your battery - put it in without slashes)
The imei folder which contains bt.text with your bluetooth mac address and a code file with the word XEN
I would recommend ODIN back to stock, root, set up this file structure (leaving out the nv files), then download the sgs unlock tool, and run it. People have reported success using the unlock tool to rebuild nv_data.
If this fails try reading through this thread - http://forum.xda-developers.com/showthread.php?t=879189&page=3
Thanks guys for helping out...
@iynfynity - My phone is unlocked. I can't get replacement since I am not in US. I bought it from ebay.com.
@pvspencer22 - I will try the way that you have mentioned. I thought since I am not in US, I can request someone from US to share their /efs folder contents. A nice guy from xda was ready to do that but then he was not comfortable :-(
Ya I wasn't to comfortable with it. It just doesn't seem safe for me to give someone else my IMEI. And plus I dont think it would work on your phone anyways, because the efs file wouldn't match your phone
Sent from my SGH-T959 using XDA App
pvspencer22 said:
I attached a screenshot of the files that should be in your efs folder. When I unlocked my phone, it required deleting all of the nv files besides the log, which leaves -
The .android folder is empty
The .imei file contains your imei number (found under your battery - put it in without slashes)
The imei folder which contains bt.text with your bluetooth mac address and a code file with the word XEN
I would recommend ODIN back to stock, root, set up this file structure (leaving out the nv files), then download the sgs unlock tool, and run it. People have reported success using the unlock tool to rebuild nv_data.
If this fails try reading through this thread - http://forum.xda-developers.com/showthread.php?t=879189&page=3
Click to expand...
Click to collapse
I tried these ways, no luck :-( Seems that the only possible way to resolve this is if someone agrees to share the contents of /efs folder of a working spare vibrant phone. But then no one is ready to do this...
Wonder if it could be possible for YOU to give your information from your phone & battery to someone on here that could make edits to their files with your info and send it to you??
jmcghee1973 said:
Wonder if it could be possible for YOU to give your information from your phone & battery to someone on here that could make edits to their files with your info and send it to you??
Click to expand...
Click to collapse
Not a bad idea
Sent from my GT-I9000 using XDA App
My original IMEI was 351801041232857.
My phone model is TMo Samsung Vibrant, I bought it from ebay.com.
Not sure what other details would be required as the only thing different is the IMEI, rest would be just as any other Vibrant phone.
Currently I am on stock JFD (downloaded from xda) and my /efs folder is completely empty.
Guys, please let me know if any other information is needed. I would be more than obliged to provide it. I am just trying out all possible ways to resolve the problem and I deeply appreciated each and every message coming my way... This is what makes xda so special...
As I have said, my handicap is that I am not in US, else I could have easily asked T-Mobile to solve this problem for me...
FATEOWNZYOU said:
Ya I wasn't to comfortable with it. It just doesn't seem safe for me to give someone else my IMEI. And plus I dont think it would work on your phone anyways, because the efs file wouldn't match your phone
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have nothing against you mate, you were just trying to help... I have completely understood your concern...
About the second part whether it would work or not, we need to try it first to figure out whether it works out or not. That is why we are here... trying to help each other out...
Guys, someone please help me out with /efs folder contents of a spare Vibrant phone...
kisfit2000 said:
Guys, someone please help me out with /efs folder contents of a spare Vibrant phone...
Click to expand...
Click to collapse
reply if you still need help. I got a solution as long as you have the backup efs folder.
iynfynity said:
reply if you still need help. I got a solution as long as you have the backup efs folder.
Click to expand...
Click to collapse
Thats the main problem, i do not have backup of my efs folder. My efs folder is empty and hence I am requesting someone to share their efs folder contents :-(
I need a vounteer helper who can share his efs folder contents...
Please...
Hi!
My imei just suddenly disappeared one day and I have been trying everything I could find on this forum to fix it. My .nv_data.bak files (in /efs folder) seems to be fine (from the date of the file), but I think my nv_data.bin files is corrupted. Have tried the methods of using the .bak file to restore the imei, but havn't worked.
I sent my phone to the service center, and they told me that they had to change the motherboard on the phone to fix it, and it would cost me 500USD+.
Is there a another way to fix the phone without changing the motherboard? Can't see how changing the motherboard can cost over 500USD when the phone itself cost 750-800 USD.
PM Odia, he'll sort you out.
zuperono said:
Hi!
My imei just suddenly disappeared one day and I have been trying everything I could find on this forum to fix it. My .nv_data.bak files (in /efs folder) seems to be fine (from the date of the file), but I think my nv_data.bin files is corrupted. Have tried the methods of using the .bak file to restore the imei, but havn't worked.
I sent my phone to the service center, and they told me that they had to change the motherboard on the phone to fix it, and it would cost me 500USD+.
Is there a another way to fix the phone without changing the motherboard? Can't see how changing the motherboard can cost over 500USD when the phone itself cost 750-800 USD.
Click to expand...
Click to collapse
Why you must pay if your phone have 2 years warranty?
Red_Vex said:
Why you must pay if your phone have 2 years warranty?
Click to expand...
Click to collapse
You void your warranty the minute you flash a custom Rom
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Intratech said:
PM Odia, he'll sort you out.
Click to expand...
Click to collapse
Talked with Odia now. Since my imei is blank and not 0049, the only way is to change the mainboard. Bah
Try this: https://market.android.com/details?id=com.helroz.GSII_Repair#?t=W251bGwsMSwxLDIxMiwiY29tLmhlbHJvei5HU0lJX1JlcGFpciJd
I assume no responsibility.
Yeah, thought about it, but can't access the market when my imei is broken :/
Doesn't that tool more less just copy the /efs folder to /sdcard, (re)format it and copy everything back (i.e. fix the corrupted filesystem)?
If that's the case, you could do those steps via adb or terminal emulator app.
HellcatDroid said:
Doesn't that tool more less just copy the /efs folder to /sdcard, (re)format it and copy everything back (i.e. fix the corrupted filesystem)?
If that's the case, you could do those steps via adb or terminal emulator app.
Click to expand...
Click to collapse
Exactly but I'm not sure how clued up the OP is so I offered him an easy option.
@OP can you not connect to the market with WiFi?
@ HellcatDroid I've tried that method with adb shell, but didn't work.
@ Intratech When I try to open the market app, a white screen just pops up in half a second, and the app close itself.
Intratech said:
Exactly but I'm not sure how clued up the OP is so I offered him an easy option.
Click to expand...
Click to collapse
I should add that function to kTool too, I think.... shouldn't I?
Go for it mate. I like the work you're doing.
---------- Post added at 01:40 AM ---------- Previous post was at 01:39 AM ----------
zuperono said:
@ HellcatDroid I've tried that method with adb shell, but didn't work.
@ Intratech When I try to open the market app, a white screen just pops up in half a second, and the app close itself.
Click to expand...
Click to collapse
Erm, try going to applications in settings and clearing the market data and see if that fixes it.
Hm, still can't get access to market. Isn't possible to download GSII_repair on PC and put it on the sdcard with USB?
I know that there are lots of forums but NONE of them answer this question, and i have spent the last week checking so i did my best. I have a SGS2 gt-i9100T with voda australia, if its relevant, and i have upgraded to XXLPQ ICS and it is rooted so i get CWM, and i have come across no lockscreen or power options. I had the same problem with the other versions of ICS but none with gingerbread. So initially i thought that i had to get into /efs/imei and change keystr to make it work. The problem is, no matter which root explorer i use when i get to the folder /efs i cannot open it. it just stays in the main / folder. I have tried to use a terminal to edit the file but it says that i dont have the permissions to do so and that it cant. i have backed up the folder using HC-K and it says that it was successful. Please someone who can help me as it is driving me nuts not being able to use ICS as it doesnt work. i also cant copy /efs as when i hold press on it and ask for info, it says that it has no files in it and no folders. and when i try to copy it, it says that nothing was copied as there was nothing TO copy.
So yeah, any help would be massively appreciated to all
so you're saying that backup was successful, why don't you make 2 backups, edit one of them to your need and restore it ? it should work.. and of course, don't forget to keep that 2nd original backup
I would except that the backup files/folders are not the ones that go in the /efs normaly. there is 2 files made from the backup, one called efs and it is a disc image file. and the other efs.tar. hang on, that tar file i may be able to edit. il get back to you on that thanks
huntsman0185 said:
I would except that the backup files/folders are not the ones that go in the /efs normaly. there is 2 files made from the backup, one called efs and it is a disc image file. and the other efs.tar. hang on, that tar file i may be able to edit. il get back to you on that thanks
Click to expand...
Click to collapse
you can edit that TAR with WinRAR for example
No luck, when i edited the file oddly it made it 0.7kb smaller, even though i added a file. and that .tar is a .tar.gz
Can you reboot in download mode?
huntsman0185 said:
No luck, when i edited the file oddly it made it 0.7kb smaller, even though i added a file. and that .tar is a .tar.gz
Click to expand...
Click to collapse
you have to pack it without compression..
078gregory said:
Can you reboot in download mode?
Click to expand...
Click to collapse
Yes i can although i dont see how it helps
amozonesk said:
you have to pack it without compression..
Click to expand...
Click to collapse
any help on how to do this?
huntsman0185 said:
Yes i can although i dont see how it helps
Click to expand...
Click to collapse
You can flash with odin official firmware from Intratech thread
078gregory said:
You can flash with odin official firmware from Intratech thread
Click to expand...
Click to collapse
i can although thats not what i want to do...
i have official firmware already from checkfus, its just this editing business thats has me confused.
the older firmware doesnt help when i need the /efs for ICS
also winrar says it can only add files to a rar or zip archive, so i cant edit the current .tar
try any other packing app, google is always here for you "how to edit .tar"
Yeah i used one of them, peazip and i thought i replicated the file perfectly and everything but its not working still, maybe i am lacking other files from /efs aside from the keystr one.
Hi,
i updated mi SGS 2 to LPQ and i have those three problems.
the first thing i see is i dont get the welcome screen, i dont care this screen, but i get it as a symptom of my problem.
the second thing and the most bothering is that i cant get the lockscreen.
and the last thing is that when i press the lock button instead of showing the shutdown menu it shutdown.
i know this problems where present in the betas, but i flashed today a phone of a friend y he doesnt have any of these problems.
does anybody knows someway to fix this?
thanks!
Is this serious? If it is, just put in your information as it asks you to and it'll go away...
Edit: It seems I misread your post, but jk0l is right, it's probably your efs. Look for a the thread about how to recover your IMEI
Your efs is missing something.
There was a solution posted somewhere.
Sorry, cant recall which thread was it.
Try search the whole forum.
thanks jk0l i will search that.
i remember that i have read something about permissions, but i could find it...
*sigh*....
This is the THIRD separate thread (not counting the solution thread, and actually one other) I have seen on this issue.
Go here.
rothariger said:
Hi,
i updated mi SGS 2 to LPQ and i have those three problems.
the first thing i see is i dont get the welcome screen, i dont care this screen, but i get it as a symptom of my problem.
the second thing and the most bothering is that i cant get the lockscreen.
and the last thing is that when i press the lock button instead of showing the shutdown menu it shutdown.
i know this problems where present in the betas, but i flashed today a phone of a friend y he doesnt have any of these problems.
does anybody knows someway to fix this?
thanks!
Click to expand...
Click to collapse
Hi,
Did you manage to find a solution for this issue? i am having the same problems. I have an additional problem of unable to register onto network as it did not show the sim pin screen. Need to disable sim pin to be able to register.
Thanks in advance for the solution.
fighter_foo said:
Hi,
Did you manage to find a solution for this issue? i am having the same problems. I have an additional problem of unable to register onto network as it did not show the sim pin screen. Need to disable sim pin to be able to register.
Thanks in advance for the solution.
Click to expand...
Click to collapse
See my post right above yours. You were probably typing it at the same time I was typing mine. (this is for the lockscreen/power options menu issue)
i tryed that i didnt fix the problem...
rothariger said:
i tryed that i didnt fix the problem...
Click to expand...
Click to collapse
Tried what I linked? I believe you may have to be rooted for it to work, but I'm not absolutely positive.
Are you rooted?
rothariger said:
Hi,
i updated mi SGS 2 to LPQ and i have those three problems.
the first thing i see is i dont get the welcome screen, i dont care this screen, but i get it as a symptom of my problem.
the second thing and the most bothering is that i cant get the lockscreen.
and the last thing is that when i press the lock button instead of showing the shutdown menu it shutdown.
i know this problems where present in the betas, but i flashed today a phone of a friend y he doesnt have any of these problems.
does anybody knows someway to fix this?
thanks!
Click to expand...
Click to collapse
You have the efs/imei/keystr problem. You will have the problem until you fix it. See here:
http://forum.xda-developers.com/showthread.php?t=1512215
http://forum.xda-developers.com/showpost.php?p=22103709&postcount=5
Sent from my GT-I9100 using xda premium
ctomgee said:
Tried what I linked? I believe you may have to be rooted for it to work, but I'm not absolutely positive.
Are you rooted?
Click to expand...
Click to collapse
yes im rooted and i did what the link says.
sxi200 said:
You have the efs/imei/keystr problem. You will have the problem until you fix it. See here:
http://forum.xda-developers.com/showthread.php?t=1512215
http://forum.xda-developers.com/showpost.php?p=22103709&postcount=5
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yes everybody is pointing this file, but i have the file and the phone is still working wrong...
rothariger said:
yes everybody is pointing this file, but i have the file and the phone is still working wrong...
Click to expand...
Click to collapse
Ok. Open up root explorer, long press the keystr file and open with text viewer. Does it have 'ON' written there?
Sent from my GT-I9100T
yes it does.
i also deleted the current file, reboot, created a new keystr file, and didnt worked.
i dont know if it is related, but my phone was one of the phones with USB problems
and also de imei problem, from time to time i lost the imei and i must to restore the efs folder.
So if you restore your efs folder do.you still have the problem?
Does restoring your efs show you your correct imei?
I also had this problem for over a month and couldn't fix it. When I copied the keystr & mps code files into the efs folder it fixed the problem. Make sure your keystr file name is all lowercase.
Sent from my GT-I9100T
sxi200 said:
So if you restore your efs folder do.you still have the problem?
Does restoring your efs show you your correct imei?
I also had this problem for over a month and couldn't fix it. When I copied the keystr & mps code files into the efs folder it fixed the problem. Make sure your keystr file name is all lowercase.
Sent from my GT-I9100T
Click to expand...
Click to collapse
Yes, I believe it's case sensitive.
yes all in lowercase..
i dont know what is mps code...
and yes it shows the correct imei...
rothariger said:
yes all in lowercase..
i dont know what is mps code...
and yes it shows the correct imei...
Click to expand...
Click to collapse
Alright. Try this!
I have attached the 2 files from the imei folder. Copy paste to your folder.
But you need to rename them to:
- keystr.txt to keystr, take out the .txt from the end
- mps_code.txt to mps_code.dat, replace .txt with .dat
If your phone needs to overwrite the old ones let it.
If you are on PC, just right-click the files and 'save as' to you PC, then move to your phone then use root explorer to move to the efs folder.
View attachment keystr.txt
View attachment mps_code.txt
sxi200 said:
Alright. Try this!
I have attached the 2 files from the imei folder. Copy paste to your folder.
But you need to rename them to:
- keystr.txt to keystr, take out the .txt from the end
- mps_code.txt to mps_code.dat, replace .txt with .dat
If your phone needs to overwrite the old ones let it.
If you are on PC, just right-click the files and 'save as' to you PC, then move to your phone then use root explorer to move to the efs folder.
View attachment 947781
View attachment 947782
Click to expand...
Click to collapse
Hi,
I am having the same issue and have copied the 2 files into my efs folder.
Still the problem persist. Also, with the issue that the lock screen doesn't appear, if there is a sim lock pin required, i will not be prompted as well.
and yes, i still have my IMEI intact.
Please advice.
fighter_foo said:
Hi,
I am having the same issue and have copied the 2 files into my efs folder.
Still the problem persist. Also, with the issue that the lock screen doesn't appear, if there is a sim lock pin required, i will not be prompted as well.
and yes, i still have my IMEI intact.
Please advice.
Click to expand...
Click to collapse
They are actually supposed to go in the /efs/imei folder. Did you put them there, or just to /efs?
ctomgee said:
They are actually supposed to go in the /efs/imei folder. Did you put them there, or just to /efs?
Click to expand...
Click to collapse
Thanks. That did it!!! I only put them in EFS/