So I followed this guide to root my phone, since I'm on Virgin Mobile in Canada.
My only question is how the heck do I install custom ROMs or Kernels to the phone? I honestly can not figure that out.
Are there any supported by this phone? I9100-M, and I keep getting the error of:
Code:
E: signature verification failed
no matter how much I try updating via CF-ROOT.
So you've flashed your CF Root kernel via Odin? Green light, good to go?
When you boot to recovery what's the version #? Which kernel/rom are you trying to flash?
The M is the same as the "International version", it just came with Bell/Virgin firmware and an M tacked onto the end of the model #; you're in the right section.
mudferret said:
So you've flashed your CF Root kernel via Odin? Green light, good to go?
Click to expand...
Click to collapse
Indeed I have, good sir. I've got Root abilities [LOVE IT] and I can do what I please... well, minus the custom ROMs.
When you boot to recovery what's the version #? Which kernel/rom are you trying to flash?
Click to expand...
Click to collapse
Trying to flash to? Or have at the moment? At the moment, booting to recovery gives me Android System Recovery 3e. The ROM I'm trying to flash is MIUI, Drunken Clam or MIUI based off CM9 though later on, if I don't like either, I was thinking I might flash a lighter ROM if they have worse battery life then the stock ROM.
The M is the same as the "International version", it just came with Bell/Virgin firmware and an M tacked onto the end of the model #; you're in the right section.
Click to expand...
Click to collapse
Yep, everyone keeps telling me that's the case. So I figured that I'm no noob to forums, just a noob to XDA.
plauge_myr said:
At the moment, booting to recovery gives me Android System Recovery 3e...
Click to expand...
Click to collapse
That's the problem. That's the stock recovery, useless for flashing anything. I'm guessing you messed up the step to get rid of the yellow triangle and flashed a complete stock kernel back on rather than the zimage. As you've noticed you retain root, but don't have Clockwork Mod Recovery. You'll have to flash a kernel via Odin again. Good luck.
mudferret said:
That's the problem. That's the stock recovery, useless for flashing anything. I'm guessing you messed up the step to get rid of the yellow triangle and flashed a complete stock kernel back on rather than the zimage. As you've noticed you retain root, but don't have Clockwork Mod Recovery. You'll have to flash a kernel via Odin again. Good luck.
Click to expand...
Click to collapse
Well damn! That would do it! Heh, well thank you for the input and I'll try again then.
plauge_myr said:
Well damn! That would do it! Heh, well thank you for the input and I'll try again then.
Click to expand...
Click to collapse
It was only a few short months ago that I was completely confused by the process
mudferret said:
It was only a few short months ago that I was completely confused by the process
Click to expand...
Click to collapse
I'm still getting the same error even after reflashing it though, and Android System Recovery 3e is still showing up, even though I'm flashing it with the proper ROM...
I think you can try on some kernel other than CF-Root to achieve root. I had rooted my phone by flashing the speedmod kernel using odin. Then you can flash custom ROMs from the CWM recovery.
I went and installed the MIUI drunken clam since I re-rooted it and put on the insecure ROM on. I don't particularly like it, but I'm thinking either try something with a better battery life then stock (way better would be nice, I've got two batteries on the way for the phone, but no clue when they're showing up.) or simply go back to stock and start removing thing via Titanium Backup.
What would be the recommended ROM if you want the most out of your battery life? Are there anything I should watch out for on said ROM? Or what ROM would you recommend, personally? I've been looking for a good one that's nice enough for day to day, but not sickeningly sweet or something.
Going to a non-Samsung ROM can be a big jump. Especially considering that the MIUI you flashed is based on CM9 which is still "experimental", not all phone functionality has been successfully ported yet.
I'd recommend a Samsung based ROM first; which one? Not sure, I haven't been on a Samsung based ROM for a few months. I preferred lighter weight ROMs; the GingerMOD was good and is similar to an AOSP based ROM. People seem happy with Hyperdroid as well; it's not lightweight, but is a great ROM from what I've heard.
Stock to CM9/AOSP/MIUI is a big jump, and can be unforgiving at times, you have to be familiar with getting yourself out of trouble. All of the Samsung ICS leaked ROMs are also buggy as hell at the moment.
Related
I've spent the last 2 days trying to fix my mistake. I have the GS2 ATT version, and I didn't realise there was a difference between that and the GTI9100 S2.
I wanted to give some tips I learned on how to recover your phone if you make this mistake.
First, here are some posts you'll want to look at:
http://forum.xda-developers.com/showthread.php?t=1286432 - Stock firwmware
http://forum.xda-developers.com/showthread.php?t=1285823 - Clockworkmod for the ATT
http://forum.xda-developers.com/showthread.php?t=1286192 - Cyanogenmod for our phones.
Using Odin and the stock firmware, you can recover your phone to a 95% working state. Once I got my stock firmware on there, I found that while making calls my phone made no sound, and the mic didn't work. The mic did work when I wasn't making calls though.
I reflashed the modem.bin file found on the stock firmware, not sure if its required but that is what I did first. Then, I unpacked the rooted stock firmware, and flashed JUST THE zImage file. After doing this, I rebooted, and my calls were working again.
After that, I installed the correct version of Clockworkmod, and then CM7 nightly. Now everything seems to be running great on my phone.
Hope this helps someone out there,
-Orbital
Good job thanx man.
Sent from my SAMSUNG-SGH-I777 using XDA App
Been awhile since I messed w/ android. I forgot about the different models myself until I realized I was spending half my day in the wrong section
Could you please explain the flashing of the CM Nightlies process to me? I can flash the signed base build but can't flash any of the added on nightlies...
Alucardis666 said:
Could you please explain the flashing of the CM Nightlies process to me? I can flash the signed base build but can't flash any of the added on nightlies...
Click to expand...
Click to collapse
In other words I can't flash the nightly builds like the latest 77 or any others for that matter.
Alucardis666 said:
In other words I can't flash the nightly builds like the latest 77 or any others for that matter.
Click to expand...
Click to collapse
Those are NOT for our version of the GS2, International only. Our version is here in the development forum.
Sent from my SGH-I777 using xda premium
Yes, it will return a status error 7 which means it's unmatched. Ask me how I know. I flashed international roms last night and used this fix to get me good again.
I flashed a KE7 I9100 build to my I777 and saw no ill effects other than incorrect capacitive button mapping. Which build did you flash? Did you make sure to wipe data factory reset afterwards.
So you are saying that you wre able to flash Euro ROMS and your phone booted just fine? Mine didnt boot at all. Did you flash the KERNEL for ATT on top of it ?
connexion2005 said:
I flashed a KE7 I9100 build to my I777 and saw no ill effects other than incorrect capacitive button mapping. Which build did you flash? Did you make sure to wipe data factory reset afterwards.
Click to expand...
Click to collapse
The simple thing would be to change out the sec_touchkey.kl with rootexplorer and take the sec_touchkey from system/usr/keylayout should fix the i9100 rom to work with the i777. Seeing as how this worked for the Captivate *i897* for jvr, jvs, and jvt darkyrom releases and I would assume that it would work.
daraj said:
So you are saying that you wre able to flash Euro ROMS and your phone booted just fine? Mine didnt boot at all. Did you flash the KERNEL for ATT on top of it ?
Click to expand...
Click to collapse
Personally I would think that you had a bad flash? Did you flash through Odin or CWM? From what I have been reading the gb bootloaders between the i777 and i9100 are different and I can see if you used a custom i9100 rom flashing via cwm could cause that. Since I am not too sure on the sgs2 if the differences between the euro models versus the carrier locked, the Kernel will not fix the button mapping, I learned this with the captivate when I switched over to using DarkyRom jvr and jvs builds since they were the most stable of GB for the i897 captivate. Plus if you are going to run a i9100 rom, I am sure the modem will not work with the att kernel. Especially if the situation with the cappy is any indication that att kernel needs att modem and i9000 kernel needs i9000 modem. I will be able to know more as soon as I get my i777 tomorrow.
HTH,
Charlie
Does anyone know how to remove the i9100 splash screen?
Google Talk Video does not work after updating to CyanogenMod 7 and back to stock rom. Any suggestion ?
spbluffmaster said:
Google Talk Video does not work after updating to CyanogenMod 7 and back to stock rom. Any suggestion ?
Click to expand...
Click to collapse
wipe data/factory reset
tried that three times... didnt help..
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
SO why do you say this flashes you back to 95%? Is there no 100% return to stock fix?
DiscipleDOC said:
Does anyone know how to remove the i9100 splash screen?
Click to expand...
Click to collapse
Speedy350z said:
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1311975
re: get rid of i9100 boot logo
Speedy350z said:
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
Click to expand...
Click to collapse
Use a download mode jig or flash entropy 512's stock TAR kernel with Odin from the link below.
http://forum.xda-developers.com/show....php?t=1286432
Good luck!
highaltitude said:
SO why do you say this flashes you back to 95%? Is there no 100% return to stock fix?
Click to expand...
Click to collapse
Some people need to wipe or also flash the modem for 100%.
Also, people who managed to flash a bootloader without hardbricking can't get back to stock with any confirmed method.
I have posted bootloader dumps, but no one has flashed them and I'm not messing with trying to flash them. They are dumps from my device and that is the ONLY guarantee I provide for them.
Entropy512 said:
Some people need to wipe or also flash the modem for 100%.
Also, people who managed to flash a bootloader without hardbricking can't get back to stock with any confirmed method.
I have posted bootloader dumps, but no one has flashed them and I'm not messing with trying to flash them. They are dumps from my device and that is the ONLY guarantee I provide for them.
Click to expand...
Click to collapse
i messed up and flashed an i9100 rom and am having the call prob u described. can i just flash the modem or stock rooted kernel and be back to 100%? if so do i use odin and do i need to check the box for repartition or anything like that? thx in advance!!!
So I've never flashed this device before, and I got it today but I'd like a custom ROM flashed to it.
Could someone point me to the following:
-A working ODIN link for this device
-A custom ROM (GB) that has all working features (camera, etc) and is built for the INTL 5.0 version (I've been looking at this: http://forum.xda-developers.com/showthread.php?t=1465144)
-A guide for getting CWM recovery.
Cheers.
This thread has all the info you are looking for.
http://forum.xda-developers.com/showthread.php?t=1720457
I personally have used the Eryigit rom you linked and it works fine.
Have fun.
I would stay away from Cyanogen and its variations right now if you want everything to work. CM7 has issues with wifi (and other stuff) and CM9 has no HW Acceleration -kernel issues.
Pretty much any rom based on stock is a safe bet.
rjwil1086 said:
I would stay away from Cyanogen and its variations right now if you want everything to work. CM7 has issues with wifi (and other stuff) and CM9 has no HW Acceleration -kernel issues.
Pretty much any rom based on stock is a safe bet.
Click to expand...
Click to collapse
Thanks, but still, how do I get CWM recovery? I couldn't see much in the above thread.
abtekk said:
Thanks, but still, how do I get CWM recovery? I couldn't see much in the above thread.
Click to expand...
Click to collapse
Check in the custom kernel section and download the kernel according to your device.
Look in the thread cvcduty posted in the custom kernel section. The kernels have CWM packaged with them. You'll need Odin to flash them. If you search the forums you'll probably find a link for Odin... or google it
Make sure you use the rigth kernel for your specific device. The 5" and 4" are different and there are two versions of the 5". Not sure if there is more than one version of the 4" or not.
rjwil1086 said:
Look in the thread cvcduty posted in the custom kernel section. The kernels have CWM packaged with them. You'll need Odin to flash them. If you search the forums you'll probably find a link for Odin... or google it
Make sure you use the rigth kernel for your specific device. The 5" and 4" are different and there are two versions of the 5". Not sure if there is more than one version of the 4" or not.
Click to expand...
Click to collapse
Thanks mate, that's what I wasn't sure about. If I happen to flash the wrong kernel I can overwrite it with the correct one as usual, correct? and it's Odin3 v1.3 I need, isn't it?
All sounds right to me. Even with a bad kernel you'll have download mode to fall back on.
rjwil1086 said:
All sounds right to me. Even with a bad kernel you'll have download mode to fall back on.
Click to expand...
Click to collapse
Thanks, just flashed it and got a boot loop.
Edit: Could be because I flashed a GB kernel while still on froyo, I best revert to stock kernel and do a KIES update first
Edit2: Tried to go stock but still a boot loop -_-
This has gone, extremely well...
/sarcasm
I just downloaded Odin 1.3 and flashed Entrophy's DD as we discussed. No issues on my device - as i anticipated because this is how I did mine initially. Which model do you have? Another question, did you try to boot into CWM after you flashed the kernel (VolUp + Power). If you can get into CWM then your good to flash whatever ROM you want, even if the Stock ROM is boot-looping.
rjwil1086 said:
I just downloaded Odin 1.3 and flashed Entrophy's DD as we discussed. No issues on my device - as i anticipated because this is how I did mine initially. Which model do you have? Another question, did you try to boot into CWM after you flashed the kernel (VolUp + Power). If you can get into CWM then your good to flash whatever ROM you want, even if the Stock ROM is boot-looping.
Click to expand...
Click to collapse
Sorted, thank you for your help and clearing things up for me.
rjwil1086 said:
I would stay away from Cyanogen and its variations right now if you want everything to work. CM7 has issues with wifi (and other stuff) and CM9 has no HW Acceleration -kernel issues.
Pretty much any rom based on stock is a safe bet.
Click to expand...
Click to collapse
i went to look and i think im blind but which are based on the stock rom? and which is the best ?
harts830 said:
i went to look and i think im blind but which are based on the stock rom? and which is the best ?
Click to expand...
Click to collapse
I just installed this:
http://forum.xda-developers.com/showthread.php?t=1579774
It's a rooted stock GB ROM with a custom kernel. Supports both USA and International devices.
http://forum.xda-developers.com/showthread.php?t=1720457
Check out this thread again. It has most of the ROMs listed as "Stock Based" or "CM Based". I'm running GB.XXKPH.WT-0.4.0 for Galaxy Player 5.0 Intl & US and it seems to be a good one. Several people like Eryigit-GB-2.3.
On another note, I'm actually trying to continue ambrice's development on CM7 but can't get my build to boot.
I still run a stock ice cream, I'm officially going to root it and put a custom fw on it. It would be a miracle at this point if they updated it.
What is the closest to the s3 rom? I'm guessing its shostock3? I really want a stock rom, with all the samsung apps. I know people ask all the time what the best rom is etc etc, but is my assumption correct here? i777 here.
my only fear is that shostock will be worse on battery life than an official one, but at the same time, that could be a false notion with me.
Thank you for any input.
justanother1020 said:
I still run a stock ice cream, I'm officially going to root it and put a custom fw on it. It would be a miracle at this point if they updated it.
What is the closest to the s3 rom? I'm guessing its shostock3? I really want a stock rom, with all the samsung apps. I know people ask all the time what the best rom is etc etc, but is my assumption correct here? i777 here.
my only fear is that shostock will be worse on battery life than an official one, but at the same time, that could be a false notion with me.
Thank you for any input.
Click to expand...
Click to collapse
With any custom ROM you should get better battery life as opposed to the stock ICS ROM, as there are kernel bugs that drains battery at a faster than normal pace.
There is also an issue with the stock kernel that can permanently brick your phone (do NOT perform a factory reset or wipe of any sort unless/until you have replaced that kernel!!)
SHOstock3 can get awesome battery life.
so is shostock3 the only rom that gives me jelly bean + touchwiz 5 ? and the samsung apps ? I saw the music player is the same as the s3 etc??
Thank you
justanother1020 said:
so is shostock3 the only rom that gives me jelly bean + touchwiz 5 ? and the samsung apps ? I saw the music player is the same as the s3 etc??
Thank you
Click to expand...
Click to collapse
Look in the development section for others but shostock3 is one of the most solid ones. Flash it and try it for yourself.
Sent from my CLEAN Note ll
so is there any other rom that give you a more stock s3 experience other than shostock?
Thank you
justanother1020 said:
so is there any other rom that give you a more stock s3 experience other than shostock?
Thank you
Click to expand...
Click to collapse
Here's my suggestion: make a nandroid backup, flash SHOstock3 and see whether you like it or not.
I installed Fromaroot and rooted the phone. I'm trying to get CWM on there now.
I was trying to do it without odin and without using a computer much. Did I mess up the process doing the fromaroot, it did succeed. All I have now is the android recovery(which i'm guessing isn't much help?).
I'm trying to install shostock, but it looks like i already need a kernel that has CWM already on the phone before I install that? I don't want stuff that is already iterated to me repeated, and have the thread locked.
But can I use mobile odin pro to install a kernel with CWM? or should I really be using the computer right now to do all of this?
Thank you
justanother1020 said:
I installed Fromaroot and rooted the phone. I'm trying to get CWM on there now.
I was trying to do it without odin and without using a computer much. Did I mess up the process doing the fromaroot, it did succeed. All I have now is the android recovery(which i'm guessing isn't much help?).
I'm trying to install shostock, but it looks like i already need a kernel that has CWM already on the phone before I install that? I don't want stuff that is already iterated to me repeated, and have the thread locked.
But can I use mobile odin pro to install a kernel with CWM? or should I really be using the computer right now to do all of this?
Thank you
Click to expand...
Click to collapse
Assuming the root process worked correctly, then you *can* use Mobile Odin (pro or lite) to install a custom kernel containing ClockworkMod Recovery. For more detailed information, please see the guides linked in my signature.
even though it says I already need a kernel that has CWM to install shostock on the official page?
sorta came off as most people will have already been flashed etc.
the last thing i want to do is brick my phone on the first attempt. Also what kernel should I flash, there is so much outdated info out there. I dont see anyone on here mention fromaroot but it worked perfectly, maybe it's a bit of a newer tool.
justanother1020 said:
even though it says I already need a kernel that has CWM to install shostock on the official page?
sorta came off as most people will have already been flashed etc.
the last thing i want to do is brick my phone on the first attempt. Also what kernel should I flash, there is so much outdated info out there. I dont see anyone on here mention fromaroot but it worked perfectly, maybe it's a bit of a newer tool.
Click to expand...
Click to collapse
Read the 1st link from creepyncrawly's signature to get started.
Simple rule to follow. Look what version of Android your phone is running now, and then read the related posts for flashing kernel, ROM, CWM, etc. That's how I did it. This phone is almost 2 years old and of course outdated info is floating around.
For me, it took less than an hour to root/flash the phone, but days to read through all related posts.
justanother1020 said:
even though it says I already need a kernel that has CWM to install shostock on the official page?
Click to expand...
Click to collapse
I'm not sure what you're getting at here.
You started out with stock 4.0.3 (or 4.0.4.) Your stock kernel contains stock 3e recovery, which you can not use to flash custom firmware. So, to put custom firmware on the phone, you need to first flash a kernel containing CWM Recovery. (There is no stand alone recovery on this phone. The recovery is built right into the kernel.) You can do that by several methods. Using Mobile Odin is the quickest and easiest. It's almost fool proof.
And yes, the phone is starting to show it's age, and the guides are getting a little out dated. But the information is still good. What is important is understanding the process. You (and everyone) should understand exactly what you are doing before you modify your phone. Once you understand the process, you are much less likely to make a paper weight.
For a custom kernel, use one of the ones linked in the OP of the thread for 4.0.4 ICS, UCLL6 plus root which is also linked in my signature.
sorta came off as most people will have already been flashed etc.
the last thing i want to do is brick my phone on the first attempt. Also what kernel should I flash, there is so much outdated info out there. I dont see anyone on here mention fromaroot but it worked perfectly, maybe it's a bit of a newer tool.
Click to expand...
Click to collapse
Just to recap, to go from stock to custom firmware
1. root
2. install a custom kernel containing CWM recovery. It should be a recovery that works with your current system.
3. use CWM recovery to flash the firmware of your choice.
4. profit
Thanks guys,
I've actually flashed a few phones for my friends, read up and 20 mins later i was off an on.
This was a bit more of a trouble for me though. Tons of ways to do it, many versions of this phone, half the time i would be reading and be like, damn this is not for the i777 can't take any chances.
i'm going to put that kernel on there , and then flash shostock3 , seems to be the closest thing to an s3 like experience on this phone.
I was / still am, heavily worried about battery life, something keeps telling me this is like going to cut my battery in half, i blame the experience on the t mobile g1, where i put all these roms on my friends phone and it just sucked away the battery.
Hopefully shostock3 does a good job though! ICS just isn't cutting it anymore
justanother1020 said:
...I was / still am, heavily worried about battery life, something keeps telling me this is like going to cut my battery in half, i blame the experience on the t mobile g1, where i put all these roms on my friends phone and it just sucked away the battery.
Hopefully shostock3 does a good job though! ICS just isn't cutting it anymore
Click to expand...
Click to collapse
Not to worry! See attachment.
Admittedly, this was very light usage. But it gives you an idea what is possible.
Oh, and this is the stock battery that came with the phone in Oct. 2011. No telling how many charge cycles on it. At least 4-500.
got shostock3 on it, runs beautifully
battery life so far is just as good or even better than stock, lots of bloatware gone.
Thank you to everyone.
Fromaroot > 4.0.4 custom kernel (mobile odin) > shostock did the trick, couldn't be easier, if you ever really motivated and didn't mind waiting a bit, i guess you could do that whole process with just the phone.
only thing i used the computer for was transferring files.
and now 4 days later the official one comes out!
Everyone lost hope, even me!
I'm tempted to try it out, but at the same time, i'm quite happy with shostock3
justanother1020 said:
I'm tempted to try it out, but at the same time, i'm quite happy with shostock3
Click to expand...
Click to collapse
mr-cook has a modified stock version. It's stock system plus root and busybox, and the jebo kernel. So if you wanted to try it out, you could make a nandroid backup of SHOstock3, try out the cooked rom, and if you don't like it, go back real easy.
Stock s3 experience
justanother1020 said:
so is there any other rom that give you a more stock s3 experience other than shostock?
Thank you
Click to expand...
Click to collapse
Try the Alliance Rom, it has the Samsung app store and you register with Samsung when you first boot up.
I recently picked up a GP 4.2. I immediately got it rooted so now I'm running a 2.3.6 stock rom with root. What's the next step in terms of getting a recovery installed and maybe moving up to an ICS or JB rom? I've kind of poked around a bit but it's some what confusing with all the other types of GPs in the same area. Does anybody have a recovery and rom they'd recommend? Is using rom manager to push CWM feasible?
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
NapalmDawn said:
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
Click to expand...
Click to collapse
you should flash CWM via odin first and then flash the ROM via CWM
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
NapalmDawn said:
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
Click to expand...
Click to collapse
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
Xenphor said:
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
Click to expand...
Click to collapse
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
MetaMav said:
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
Click to expand...
Click to collapse
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Xenphor said:
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Click to expand...
Click to collapse
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
NapalmDawn said:
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
Click to expand...
Click to collapse
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Where could I find a stock kernel?
Xenphor said:
Where could I find a stock kernel?
Click to expand...
Click to collapse
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Ok thank you. However, will this work with YP-GS1?
But about kernels, on the webpage where I downloaded the stock rooted rom http://tau.shadowchild.nl/attn1/?p=166 it says specifically that the Wifi module in system and kernel must MATCH. This is what I'm talking about in regards to kernel compatibility with roms. How do I know if a kernel I'm downloading will have changes applied to it that will work with another rom like with this stock rom/kernel?
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Well I had to flash this kernel http://forum.xda-developers.com/showthread.php?t=2198234 to get CWM on mine. I haven't actually flashed anything with CWM because there doesn't seem to be any good roms for the 3.6 unless CM7 comes out sometime. I used Odin to flash a stock rom from here http://tau.shadowchild.nl/attn1/?p=166
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
NapalmDawn said:
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
Click to expand...
Click to collapse
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
MetaMav said:
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
Click to expand...
Click to collapse
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Xenphor said:
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Click to expand...
Click to collapse
Xen-it seems GPlayer development is still fairly newish. the work you see from devs now are all ground work. For the 4.2 and 3.6, they seem a little less dev populated than the 4 and 5. People will build upon the work of early devs and eventually get kernels that can OC and maybe ICS and JB roms. At this stage, we likely won't see anything like ZOMG earth shattering until people spend time with the devices. Seems Serk is on his way to doing the best he can for 4.2 but I am not sure who is tackling 3.6
It's weird how roms for devices go. I learned this when I had a tbolt and shockingly saw a FUNCTIONAL JB rom for my old Eris while the tbolt was still hanging back in ginger land with not even a really good ICS rom let alone JB. I asked the Tbolt community-why? How is it the dinosaur Eris has JB and not us? It all depends on what the devs can do with the sources provided. Sometimes certain hardware points are sticky. you can have beautiful JB rom for a device that can't talk to the camera if the hardware source isn't made available (reference the HP TP for many years)
For now, flash what you're comfortable with and and learn what you do and don't like. Also learn if you want to play things safe and not experiment or take on potentially beta builds. For the tbolt, tackling an ICS rom was too dicey so I never did. On my new Rezound, I eat up JB roms as they are in much better shape
Apologies for the desperate newbie question, but here goes--
I have followed the instructions in the stickied tutorials or tried to follow them so far. I rooted my SGH-i777 using framaroot. No problem there.
I got Mobile ODIN and the latest siyah CWM. I flashed the kernel.
When I try to power on I get stuck at "SAMSUNG" and then phone appears to power off.
I can get into recovery mode using vol up, vol down and power. I see the Siyah screen, etc. But that's as far as I can go.
HELP!
It seems to be that you flashed the wrong kernel what kind of ROM are you running touchwiz or aosp
Sent From My Liquidsmooth Galaxy S3
Reaper351c said:
It seems to be that you flashed the wrong kernel what kind of ROM are you running touchwiz or aosp
Sent From My Liquidsmooth Galaxy S3
Click to expand...
Click to collapse
Thanks for your response. I flashed the latest Siyah kernel after reading the "How to Flash Custom Binaries Without Ever Incrementing the Flash Counter!!" thread. FWIW in recovery mode it says "CWM-based Recovery v6.0.1.2-Siyah"
I had actually factory reset my SGH-i777 before rooting and flashing so I was running the Touchwiz that comes stock with the SGH-i777.
Any steps I can take to get out from under this rock? :crying:
hyderbad said:
Thanks for your response. I flashed the latest Siyah kernel after reading the "How to Flash Custom Binaries Without Ever Incrementing the Flash Counter!!" thread. FWIW in recovery mode it says "CWM-based Recovery v6.0.1.2-Siyah"
I had actually factory reset my SGH-i777 before rooting and flashing so I was running the Touchwiz that comes stock with the SGH-i777.
Any steps I can take to get out from under this rock? :crying:
Click to expand...
Click to collapse
Yes. Not to worry.
It sounds like the system is incompatible with the kernel. You didn't say which version of the OS you were running before you installed the kernel. Do you remember what it was? Which stock comes with the phone would depend on how old the phone is.
How to proceed depends on what you want to do. If you want to install custom firmware, then I would suggest that you flash one of the stock plus root packages with Odin, and then use Mobile Odin lite or Mobile Odin pro to install the correct custom kernel, meaning one that is compatible with the system that you chose.
creepyncrawly said:
Yes. Not to worry.
It sounds like the system is incompatible with the kernel. You didn't say which version of the OS you were running before you installed the kernel. Do you remember what it was? Which stock comes with the phone would depend on how old the phone is.
How to proceed depends on what you want to do. If you want to install custom firmware, then I would suggest that you flash one of the stock plus root packages with Odin, and then use Mobile Odin lite or Mobile Odin pro to install the correct custom kernel, meaning one that is compatible with the system that you chose.
Click to expand...
Click to collapse
Thanks for your help.
It was 4.1.2. The phone was from near launch but I've upgraded the OS as Samsung has released them.
Ultimately I'd like to end up with CM10.1, but obviously that's a secondary concern at this point to a working phone
Sorry for being dense, but can you explain what you mean by "flash one of the stock plus root packages with Odin, and then use Mobile Odin lite or Mobile Odin pro to install the correct custom kernel?" Or point me to a thread/post that does so? Thanks again :good:
hyderbad said:
Thanks for your help.
It was 4.1.2. The phone was from near launch but I've upgraded the OS as Samsung has released them.
Ultimately I'd like to end up with CM10.1, but obviously that's a secondary concern at this point to a working phone
Sorry for being dense, but can you explain what you mean by "flash one of the stock plus root packages with Odin, and then use Mobile Odin lite or Mobile Odin pro to install the correct custom kernel?" Or point me to a thread/post that does so? Thanks again :good:
Click to expand...
Click to collapse
Here it is (the stock + root rom): http://forum.xda-developers.com/showthread.php?t=2322046
It doesn't hurt to do some looking.
Use Odin v1.85 for the flashing (google it).
Then find a kernel for your phone (don't try Siyah again :b), like for example, Entrophy's kernel, and flash the zimage file using mobile odin.
hyderbad said:
Thanks for your help.
It was 4.1.2. The phone was from near launch but I've upgraded the OS as Samsung has released them.
Ultimately I'd like to end up with CM10.1, but obviously that's a secondary concern at this point to a working phone
Sorry for being dense, but can you explain what you mean by "flash one of the stock plus root packages with Odin, and then use Mobile Odin lite or Mobile Odin pro to install the correct custom kernel?" Or point me to a thread/post that does so? Thanks again :good:
Click to expand...
Click to collapse
OK. The AJK v3.0 NoSwap kernel is the only kernel compatible with stock AT&T JB 4.1.2. However, unless you can get it onto your sd card, it won't do you any good at this point.
So I would suggest you flash UCLL6 stock plus root which is 4.0.4 from here. The OP has the complete guide, and links to working custom kernels. Once you get it up and going with a custom kernel, you can then flash CM 10.1, or anything else you want.
Edit: Cooked v1.6 as suggested by azeem40 is not Odin flashable. It is a CWM flashable zip, so you would have the same issue getting it onto your sd card. The above is your quickest route.