Related
This is for people who wanna go from Stock GB and based ROM's to Old Baseband ROMs (mik's CM7, Andy's Phoenix, Froyo, etc).
For the vice Versa, just flash the Old BaseBand Back.
If you don't have a Recovery yet
Install ROM manager and Install CWM Recovery, the Latest one will will be installed as u update it, atm the latest one is 5.x
Reboot into recovery and then make a Nandroid Backup. Now if u do anything wrong bla bla u can just restore your backup :_D [You Have not Flashed Baseband yet and don't do it yet!]
Now download your Fav ROM whatever it is, and Put it on your SD card, keep it outside as it will be easier to find. and ofc don't forget to Backup your Contacts and whatever you might need.
Now you are ready to Test the New ROM.
Reboot Into Recovery and wipe
Cache
Dalvik
Battery Stats
do a WIpe/Data/factory Reset
and finally goto mounts and Storage-> Format System
now come back and Say Install Zip from SDCARD
Choose the Zip
IT will do the update and say Process Complete
now Reboot Your Phone.
Your Phone Will Boot into your New ROM.
BUT: if its a Old Baseband Based ROM, you will not get GSM/Data Working don't Panic/Worry
Test the ROM, See the Features Check out the Camera/Wifi/Tether and all the possible things you expected to see and work.
If you are Satisfied with it now u can get ready to Flash the Old Baseband, if you are not Satisfied Reboot into Recovery and Restore your Backup.
--FLASHING OLD BASEBAND---
WARNING: 1'ce you do this (flash Old Baseband) Even u Restore your Nandroid Backup you wont get ur GSM/DATA back you will have to Flash the New Baseband if u wanna get your Stock GB working(New Baseband ROMS). so Proceed only if you are sure of Keeping the New ROM :-D (Old Baseband ROM you just Installed/Tested)
Keep the Tools Ready: 1. the LGMDP-v1.5.exe utility! and 2. the v10 Baseband
Enable USB Debugging on your Phone
Connect your Phone yo your Computer via USB and goto Device manager and Disable the LG Virtual Modem
open LGMDP-v1.5.exe
Select Port : Choose your Phone and Click on Connect
Under the IMAGE folder choose the Location where you Unzipped the Baseband (v10 is Old v20 is New)
u'l get 2 Errors Ignore that Close the Window and Click on Download
the Process will take around 5 mins.
now Dont Do Anything to Your Phone/
Go Grab a Cup of Coffee or Walk your Dog, anything waste those 5mins and come back :-D
You will get a Confirmation that the Process is Complete
Switch On Phone if Its Not Started
If Everything Went Correct you Will Have GSM working on your Phone
for Data Connectivity Please Input Your Settings Like Access Point Bla bla in the Network Setup
--------------
Now!: if you dont wanna stay on the Old Baseband ROM you can go Back to the New Baseband ROMS ofc just follow the Baseband Instructions Above and Instead of Choosing the v10 Image Choose the v20 Image
do that and u'l be On the NEw Baseband :-D
-------------
Conclusion: You Can Flash BaseBand first and then ROM or ROM first and then Baseband
Hope i Helped :-D
Links
Old BaseBand
New Baseband
LGMDP-v1.5 Tool
Changing Kernel and updating ROM to newer version:
Wipe Dalvik Cache,Cache and Battery Stats.
Changing ROM : FormatSystem, Wipe Data(<- Or Else u'l get a Gazillion FC's) and the Above3 then Install your ROM
I Have Stock ROM i wannna go Custom ROM
1. Root your Phone (gingerbreak should do the job)
2. Install ROM Manager
3. Flash Latest CWM from ROM Manager
4. Download the ROM u want
5. Flash it Via CWM
If Your Data/GSM Dosn't Work :- U have Wrong Baseband :- Refer to 1st Post
Installing ROM
1. mounts and storage -> system-format
2. Clear Data
3. Clear Dalvik Cache,Battery Stats and Cache
4. Choose Zip to Apply Update
5. Reboot!
Enjoy :-D
Do u quarrel with yourself or what
Thank you so much
Sent from my LG-P500 using XDA App
Will that tool get the stock ROM IF it comes to p500?
Sent from my LG-P500 using XDA App
QUOTE=vlt96;18649194]Will that tool get the stock ROM IF it comes to p500?
Sent from my LG-P500 using XDA App[/QUOTE]
Noo i don thin so, just the old baseband
jabbeboy said:
QUOTE=vlt96;18649194]Will that tool get the stock ROM IF it comes to p500?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Noo i don thin so, just the old baseband[/QUOTE]
No so it can get you back to the new baseband, but if a newer baseband(the 4.0) comes to p500, but i don't think it comes, will it update?
Sent from my LG-P500 using XDA App
vlt96 said:
Noo i don thin so, just the old baseband
Click to expand...
Click to collapse
No so it can get you back to the new baseband, but if a newer baseband(the 4.0) comes to p500, but i don't think it comes, will it update?
Sent from my LG-P500 using XDA App[/QUOTE]
4.0 Baseband is not out idk when it wil be out
atm we just have 2 Basebands
all Custom ROMS of 2.3.x ( non Official [2 major 1's that are Andy's Phoenix and mik's CM7 ] ) are on the Old Baseband
and All the Original Gingerbread Based ROMS 2.3.3 are using the New Baseband.
4.0x <- nothing till date
and if u wanna Flash Stock GB just get the Zip file and Flash it like like u flash any other ROM
/wipe data
/format system
Flash ZIp
gnsxp said:
No so it can get you back to the new baseband, but if a newer baseband(the 4.0) comes to p500, but i don't think it comes, will it update?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
4.0 Baseband is not out idk when it wil be out
atm we just have 2 Basebands
all Custom ROMS of 2.3.x ( non Official [2 major 1's that are Andy's Phoenix and mik's CM7 ] ) are on the Old Baseband
and All the Original Gingerbread Based ROMS 2.3.3 are using the New Baseband.
4.0x <- nothing till date
and if u wanna Flash Stock GB just get the Zip file and Flash it like like u flash any other ROM
/wipe data
/format system
Flash ZIp[/QUOTE]
Ok tnx
Sent from my LG-P500 using XDA App
Flashed it, had lots of errors and nothing was clear on that pc tool, but a reboot did the job after that
Sent from my LG-P500 using XDA App
vlt96 said:
Flashed it, had lots of errors and nothing was clear on that pc tool, but a reboot did the job after that
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
FLashed it :-> ok
Had a lots of Errors :-> Where? the LG Tool?
Nothing was clear on the PC Tool :-> Wasn't CLear as in not in english?
Reboot did the job after that :-> Problem Solved? what got solved?
*confused
gnsxp said:
FLashed it :-> ok
Had a lots of Errors :-> Where? the LG Tool?
Nothing was clear on the PC Tool :-> Wasn't CLear as in not in english?
Reboot did the job after that :-> Problem Solved? what got solved?
*confused
Click to expand...
Click to collapse
Im confused too, but it was succes...
Sent from my LG-P500 using XDA App
gnsxp said:
This is for people who wanna go from Stock GB and based ROM's to Old Baseband ROMs (mik's CM7, Andy's Phoenix, Froyo, etc).
For the vice Versa, just flash the Old BaseBand Back.
If you don't have a Recovery yet
Install ROM manager and Install CWM Recovery, the Latest one will will be installed as u update it, atm the latest one is 5.x
Reboot into recovery and then make a Nandroid Backup. Now if u do anything wrong bla bla u can just restore your backup :_D [You Have not Flashed Baseband yet and don't do it yet!]
Now download your Fav ROM whatever it is, and Put it on your SD card, keep it outside as it will be easier to find. and ofc don't forget to Backup your Contacts and whatever you might need.
Now you are ready to Test the New ROM.
Reboot Into Recovery and wipe
Cache
Dalvik
Battery Stats
do a WIpe/Data/factory Reset
and finally goto mounts and Storage-> Format System
now come back and Say Install Zip from SDCARD
Choose the Zip
IT will do the update and say Process Complete
now Reboot Your Phone.
Your Phone Will Boot into your New ROM.
BUT: if its a Old Baseband Based ROM, you will not get GSM/Data Working don't Panic/Worry
Test the ROM, See the Features Check out the Camera/Wifi/Tether and all the possible things you expected to see and work.
If you are Satisfied with it now u can get ready to Flash the Old Baseband, if you are not Satisfied Reboot into Recovery and Restore your Backup.
--FLASHING OLD BASEBAND---
WARNING: 1'ce you do this (flash Old Baseband) Even u Restore your Nandroid Backup you wont get ur GSM/DATA back you will have to Flash the New Baseband if u wanna get your Stock GB working(New Baseband ROMS). so Proceed only if you are sure of Keeping the New ROM :-D (Old Baseband ROM you just Installed/Tested)
Keep the Tools Ready: 1. the LGMDP-v1.5.exe utility! and 2. the v10 Baseband
Enable USB Debugging on your Phone
Connect your Phone yo your Computer via USB and goto Device manager and Disable the LG Virtual Modem
open LGMDP-v1.5.exe
Select Port : Choose your Phone and Click on Connect
Under the IMAGE folder choose the Location where you Unzipped the Baseband (v10 is Old v20 is New)
u'l get 2 Errors Ignore that Close the Window and Click on Download
the Process will take around 5 mins.
now Dont Do Anything to Your Phone/
Go Grab a Cup of Coffee or Walk your Dog, anything waste those 5mins and come back :-D
You will get a Confirmation that the Process is Complete
Switch On Phone if Its Not Started
If Everything Went Correct you Will Have GSM working on your Phone
for Data Connectivity Please Input Your Settings Like Access Point Bla bla in the Network Setup
--------------
Now!: if you dont wanna stay on the Old Baseband ROM you can go Back to the New Baseband ROMS ofc just follow the Baseband Instructions Above and Instead of Choosing the v10 Image Choose the v20 Image
do that and u'l be On the NEw Baseband :-D
-------------
Conclusion: You Can Flash BaseBand first and then ROM or ROM first and then Baseband
Hope i Helped :-D
Links
Old BaseBand
New Baseband
LGMDP-v1.5 Tool
Click to expand...
Click to collapse
Did it in 1 go!! thnx
I have a problem with LGMDP app because after i select the baseband the start button freezes , even if i select the run as administrator button when i start the LGMDP
I've been waiting for 30mins+ and nothing happened!
The LGMDP says" Trying to communicate with phone and the phone is in emergency mode!
KoulisHHH said:
I've been waiting for 30mins+ and nothing happened!
The LGMDP says" Trying to communicate with phone and the phone is in emergency mode!
Click to expand...
Click to collapse
30mins u say? Last time I did it actually the 1st time I did Iit that happened ... ok don't blame me of anything screws up but......if u waited like 30mins unplug the phone and press the power that should do the trick I remember I did it last time like that so give it a try
killerash said:
I have a problem with LGMDP app because after i select the baseband the start button freezes , even if i select the run as administrator button when i start the LGMDP
Click to expand...
Click to collapse
Using win7x64?
gnsxp said:
30mins u say? Last time I did it actually the 1st time I did Iit that happened ... ok don't blame me of anything screws up but......if u waited like 30mins unplug the phone and press the power that should do the trick I remember I did it last time like that so give it a try
Click to expand...
Click to collapse
nope,nothing.I'm running the program as admin,and I'm flashing the old baseband nad I hace also tryed flashing the new one....:S
Thanks for the guide, I had to redo my baseband for an CM7 Rom. Just annoying you have to switch to the new baseband for Gingerbread.
This a tricky business, I am happy with Mike's CM7 with gsm fix
My son has one of these ph's...
Soonish I will install recovery using odin & then make a nandroid of his stock rom...
once we have that done I'm guessing he'll want to try a custom rom
do I need to flash a 2.2 stock rom before trying CM7??
If so, which stock rom should I be using... I'm from New Zealand btw (next to Australia).
T.I.A
Pre-requisites:
Visit the Basebands thread and make sure that you are using a baseband that is recommended for CyanogenMod.
You need a rooted phone, ClockworkMod Recovery (first time users must flash with Odin), and ROM Manager. For more information on all three items, see the Getting started with ROM Manager & ClockworkMod section in post #2.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1149110
In order to avoid flashing 2.2 then going to CM7 you will need first the correct baseband for your region and flash it with Odin before flashing CM7 port by MADTEAM. I hope that this was helpful
chillvisio said:
http://forum.xda-developers.com/showthread.php?t=1149110
In order to avoid flashing 2.2 then going to CM7 you will need first the correct baseband for your region and flash it with Odin before flashing CM7 port by MADTEAM. I hope that this was helpful
Click to expand...
Click to collapse
Thanx for reply ^^
but...my sons ph is stock 2.1, so it already has correct baseband
You're saying I can go straight to CM7 (from 2.1) as long as I flash correct baseband along with CM7 install?
Once I have CWM installed & everything backed up I'll give it a nudge
King_Rat said:
Thanx for reply ^^
but...my sons ph is stock 2.1, so it already has correct baseband
You're saying I can go straight to CM7 (from 2.1) as long as I flash correct baseband along with CM7 install?
Once I have CWM installed & everything backed up I'll give it a nudge
Click to expand...
Click to collapse
I understand, but you already need the 2.2 baseband version before installing CM7 port. It won't work with 2.1 baseband. Just go to madteam.co forum and grab the latest baseband version for your region, then flash it, and finally flash the CWM.
Stuck @ Odin ^^
chillvisio said:
I understand, but you already need the 2.2 baseband version before installing CM7 port. It won't work with 2.1 baseband. Just go to madteam.co forum and grab the latest baseband version for your region, then flash it, and finally flash the CWM.
Click to expand...
Click to collapse
Odin won't detect ph??
Cable is working... (can get into kies)
Ph is in download mode...
Drivers are installed (those for when ph is awake [auto installed via Win 7] & those from Samsung site when ph is in download mode [manually installed])
Must be the OPS file!!
I need one for GT I5500...
when I select the OPS that came in archive from the 'How to install CWM & CM7' thread... it shows I5500 @ the top of tool & not GT-I5500 from the images in the guide...
Please advise
These are the steps that I'm using to flash stock and other ROMs: http://forum.xda-developers.com/showpost.php?p=13958380&postcount=2
You have to pass the three key combination in order to enter "download mode". After you are in, you will like to load the OPS file which is named EUROPA_v1.0.ops. Choose "one package" in Odin options in the left and load the baseband that you've downloaded at the baseband thread in "One package" down in the right. Then connect the phone and the spot called "Com port mapping" will light up in yellow which means that not only that your phone has been detected, but it is ready to be flashed. Now click the "Start" button and wait a few seconds. Your phone will restart and probably will bootloop. Take out the battery and place it back in a few seconds later. Go to download mode again and load the CWM tar as "one package". Then flash again.
After the phone restarts you will be within the ClockworkMod recovery. Now it is time to place the update and gapps (should your son need google apps package for some reason) in the root folder of your microSD card (or in some folder called eg. CyanogenMod). Flash the CM update, wipe all data, cache, dalvik, battery stats, fix permissions, restart and you will see the blue skating robot. If you have a bootloop, redownload the update file for CM and reupload it to to sd card... now you are using the CM port by psyke83
chillvisio said:
I understand, but you already need the 2.2 baseband version before installing CM7 port. It won't work with 2.1 baseband. Just go to madteam.co forum and grab the latest baseband version for your region, then flash it, and finally flash the CWM.
Click to expand...
Click to collapse
Dude!! I flashed the baseband from madteam and now I'm in boot loop
Knew it sounded fishy
baseband on my moto is changed after rom install... not before
I'd appreciate if you could point me to a stock firmware that I can flash with Odin or tell me the key combination to get into recovery mode so I can restore the backup I made...
Edit: Found a English stock 2.2 rom which I flashed using Odin...
Can't we get into recovery with a key combo?? Seems odd
Here is the sequence of upgrading from 2.1 to CM7 port:
Plan B
1. flash baseband for 2.2 (or flash 2.2 itself and it will replace 2.1 baseband with 2.2 one)
2. flash CWM and it will reboot in recovery mode
3. install CM7 from update file from goo-inside.me...
or:
Plan A (psyke83 prefers this one)
1. root 2.1
2. install GooManager from G Play Store
3. open GooManager, check for updates, download update and enter recovery to install CM7
It looks like you've just completed step 1 from Plan B. Now it's time to visit download mode again and proceed with step 2, then step 3 and you are running CM7.
I tried going from stock 2.1 to CM7...my G5 is from the Middle East, with XSG product code so it was sitting on 2.1 since I bought it...
No matter how many times I tried going into recovery, performing the "4 wipes" and then installing in the correct sequence, it wouldnt leave boot loop...to top it up, my stock JJ2 rom flashed using Odin was also boot-looping...
I only rescued my phone by first flashing i5500XXJED and then going back to my stock ROM...
Was this because I didn't go from 2.2 to CM7?
got CM7 on it no probs ^^
tried reboot via power menu options & ph stuck at boot!?
Spent the better part of next 2 hours getting back to working 2.2...
will try suggestions below...
Edit: CM7 on & working ^^ going to stay away from 'Reboot' option though ;-P
Well, should you find CM7 not stable enough, just go with 2.2 until a stable CM7 relase is up.
You could also try this one: http://www.madteam.co/forum/development/(beta-released)-mad-rom-2-5/
Sms text is white on white... Swiping up turns text black.
The biggie is no lock screen?!
Any one got a fix for this bug?
King_Rat on tap
We've settled on clean rom ^^
visually it's bit of a dogs breakfast
Extra large slider tabs!? Baby blue on baby blue!? No theme engine? (anyone know how to manually install this??)
Functionality seems to be good ^^ couple of the games he likes have a screen time-out glitch...
Otherwise all is good
Hello Guys ..
I have a problem in updating my sensation xl
after i root it and installed CWM then i recovered the previous software version
i checked for update and it was available update to ICS
after the download is finished the phone rebooted and then the CWM logo is appeared and did nothing
I re-Locked the device and tried again
after the reboot showed me warning and did nothing also
Im trying to remove the CWM but i don't know what to do ?
is the CWM is responsible for all these ?
and how can i remove it ??
if not then what should i do ?
plz need ur help
Dont worry
it seems your phone is a little messed up
just search for the stock rom (you mentioned ics is released so try to find it)
look in the xda for a flashing guide for ur phone and flash the ics stock rom
jiffer1991 said:
Dont worry
it seems your phone is a little messed up
just search for the stock rom (you mentioned ics is released so try to find it)
look in the xda for a flashing guide for ur phone and flash the ics stock rom
Click to expand...
Click to collapse
thanks for replay
you mean just download and install the stock rom and every thing will return to normal ?
yap the stock rom you have to flash with odin contains the whole original software
after flashing its like ure unboxing the phone after buying it
it will whipe all your data even the root acces and the cwm ure back on stock recovery afterwards.
http://www.android-hilfe.de/custom-...401-x-ice-cream-sandwich-htc-sense-3-6-a.html
if you dont know how to use odin look here in the xda forum for a tutorial
after flashing go to recovery and whipe data/cash
i install knight elf experimental full(kernel) by fastboot.when i close fastboot and turn on my phone dont turn on.work vibrate but not turn on
*my rom is ginger bread
*codename 9.3 eman expria
What kernel look like experimental full 10.1 ??
Please answer my quastion becuse my phone do not turn on ??
I have problem with knight elf kernel
why knight elf experimental full dont work on my neo v
make sure flash the right one.Night-Elf's kernel for GB
Edit : download link is broken.find it elsewhere.i saw it mirrored...dont remember,where it is...
Edit 2 : i searched for you : http://forum.xda-developers.com/showthread.php?t=1468043&page=56
megatpanji said:
make sure flash the right one.Night-Elf's kernel for GB
Edit : download link is broken.find it elsewhere.i saw it mirrored...dont remember,where it is...
Edit 2 : i searched for you : http://forum.xda-developers.com/showthread.php?t=1468043&page=56
Click to expand...
Click to collapse
Thank you for answer
Im sure im flash right kernel
sendspace.com/file/lu3dwc
forum.xda-developers.com/showthread.php?p=21896062
Help plz
7illa said:
Thank you for answer
Im sure im flash right kernel
sendspace.com/file/lu3dwc
forum.xda-developers.com/showthread.php?p=21896062
Click to expand...
Click to collapse
I think you are flash the wrong kernel, the kernel you've flashed is for ICS not for GB..
You may just have soft-bricked your phone, but don't fret . My Neo V was also got stuck on the SONY logo yesterday, after I tried to flash a custom ROM. The phone wouldn't even go into recovery mode. I tried many things to get my phone back up again including flashing the stock kernel, but nothing worked, except repairing it through PC Companion.
If nothing else works, you can try the "Repair" option in Sony PC Companion, which will flash your phone with the latest stock ROM and you will have to root it again (if you want). But BEWARE, all your phone data will be LOST, if not already backed up. If you are wondering where to find the "Repair" option in PC Companion, open the software >> Support Zone >> Update Firmware. On this small window where it asks you to connect your phone, you will see the "repair" option just below on this screen.
You may have done many wrong things, you need to divide kernel issues from rom ones.
Anyway you can set back to stock firmware (rom+kernel) flashing the fw you want with flashtool. Full wipe is a must. If you can't enter cwm right now you will lose your rom-data in order to restore phone.
When you flash a kernel you have to check which android rom it is build for (gb, ics, jb), or your phone will not be able to boot.
Then when you flash a rom you have to make full wipe and follow its instructions.
Of course if you flash whole stock firmware you don't have to worry about the things above.
Don't use PC companion, instead use Sony Update Service. If it refuses to help you, then flash fw manually with flashtool.
Sent from my MT15i using xda app-developers app
flash official .62 rom using flash tool and it'll work
then
flash nightelf GB kernel using fastboot or flashtool
after that reflash your rom
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
JJSJJS said:
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
Click to expand...
Click to collapse
First of all check if it g version or not.
To best of my understanding you can install it directly as far as you are rooted.
Sent from my GT-I9100 using xda premium
You don't need to flash an older version before KK. You just need KK compatible recovery. Or you can flash a KK compatible kernel, reboot to recovery and flash your KK rom.
Hello, thank you both for your replies.
Finally some clear answers
The model says GT-I9100 and not with g behind it, thanks.
I found some things about the status 7 error and about removing some line in a script in the zip.
So i will try the kitkat recovery (in my understanding this is also the kernel?) and then flash it with kitkat rom.
I would like to flash the one from cyangenmod, but doe it really mather which custom kitkat rom i take? At least they are all without the providers code like Vodafone or others?
Thanks again. I will update the thread if it succeeds or not.
Hi,
so i could not install the latest Recovery_CWM_6.0.4.7_I9100.zip as it gave an error E: signature verification failed.
then i tried recovery-clockwork-touch-5.8.1.5-galaxys2.zip and this works. But with this i can't install CM11. as i get the status 7 error.
So i will try some other versions kitkat compatible.
I also took a look at the kernels section but it is not clear wich one to use for CWM6 as i don't know what XXLSR or DDLS3 means, and which is correct for Netherlands.
Do you have any idea? (i am not allowed to post there yet)
Thanks for your help.
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
banjara said:
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
Click to expand...
Click to collapse
Thank you very much Banjara !
i'll keep trying, will report if i succeed
oh oh no good.....
JJSJJS said:
Thank you very much Banjara !
i'll keep trying, will report if i succeed
Click to expand...
Click to collapse
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
JJSJJS said:
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you are able to go back to download mode
1. Flash a stock rom via odin
2. Flash a custom kernel via Odin. You might find some in the link you put there or you can search for hirox kernel. Remember, you have to download Odin flash able kernel and follow the op.
3. Once you have custom kernel, reboot to recovery. Flash any of the kernels in clockworkmod mentioned in my previous post.
4. Reboot to recovery. Flash your rom.
If you are unable to go to download mode try all the methods mentioned in the below link to bring it back to normal. It will need patience and perseverance. http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Thank you for your patience and your help Banjara.
This forum and it's people are 100 times better the on Gyanomed were totally no support is given...
I will try it and come back, at least the phone able to start in the download mode.
Probably the usb connector has some loose contacts as i can get no contact with pc.
I got this phone from my brother and he told me that it never worked, just loading the battery
So i tried an other cable from an cheap android pad, but also no luck
maybe tommorow, i have another cable from an android stick pc at my job, maybe it will work
else i have to open it to check the connector under a microscope and probably resolder(hotair) it with a lot of flux... what a pitty... :crying:
lucky i have some experience on it, i repaired a lot of qtek phone, some years ago, always that connector broken.
I'm originally an tv(crt,lcd,plasma) repair technician, but now on an other job
Pfew, i managed to rsolder the connector with help of the microscope on my job.
I could even connect to odin. so that's is good progression. i had a wrong kernel downloaded, so it failed.
now i have the correct one and will use Siyah-s2-v6.0b5.tar
But unfortunately the battery is really emptying quickly when it stays in the phone, i don't know why.
So i will have to charge it an then give it another try with this kernel.
The ROM should still be original as i did not flash it before, just the kernel.
The phone is now saying battery empty, can't download.
To be continued...
Jippieeee!
GREAT !!!!
It worked! flashed the kernel Siyah-s2-6.0b5 and it started ! :victory:
Now what is the best way to proceed, there are so many topics on this it is overwhelming.
Should i first flash a Kernel or first a rom?
Can i flash them right after each other? (kernel reboots) so ROM and directly Kernel in one go?
thanks for your help!
{SOLVED}
Ok this is solved, thank you guys and dolls !
i managed to flash the cwm 6++++ and then the OMNI kitkat (latest) and the gAPPs
and it is working ! i am verry happy ! :laugh::laugh::laugh::laugh::laugh:
:thumbup::beer::beer:
one more thing
i noticed there is also another kernel now in the phone.
How to get rid of the yellow exclamation mark?
i saw some footage on youtube how to do it with the correct kernel.
But can i also extract the kernel from the ROM.tar i used and flash it with Odin?
Or is there another way?
thanks for your help. ---> edit
ok found some here: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399
but is it also good enough to unroot your device or are some functionality's then lost when using OMNI- rom ?
Thanks for your help
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Radelos said:
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Click to expand...
Click to collapse
Thanks Radelos, then i will try to unroot it again. And that will be it then.
Now using the OmniKK nightly of 8th of june, it runs very smooth, no issues till now, all is working well. :good:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Radelos said:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Click to expand...
Click to collapse
So with this process, will there be no yellow triangle?