Related
Hi there, I'm panicking right now.
I just rooted my phone using a tutorial online and it was no problem and everything worked fine after that.
Then I used another tutorial to flash my ROM to CM7 and that's when I started to have problems.
I booted into ClockworkMod Recovery (holding volume up + home + power) and wiped data and chache partition, then I select "Install zip from sdcard" and chose CM7 zip file which I had put on to my sd card, I get a message that installation was successful.
But now I can't access my phone, it's stuck at the Samsung Galaxy SII logo.
I have wiped data again and used Odin to flash a stock ROM on to my phone but it doesn't work.
I need help guys.
EDIT: This post doesn't matter now, there is a new reply at page 3 with new problems.
Did you use a .pit file a repartition when you flashed a stock ROM with ODIN again? What do you mean the phone doesn't work? Does it bootloop or still stuck on the startup logo?
Prasad007 said:
Did you use a .pit file a repartition when you flashed a stock ROM with ODIN again? What do you mean the phone doesn't work? Does it bootloop or still stuck on the startup logo?
Click to expand...
Click to collapse
Well the phone did bootloop at one time and I fixed that by flashing a stock ROM on the phone with Odin, did not use a PIT file.
Now the phone is just stuck on the white Galaxy SII logo and I was hoping that flashing the phone again with stock ROM would also fix that.
I did not use a PIT file for that either.
Please reflash with a stock ROM that contains DBDATA and use a .pit file for repartitioning... That should fix your phone!
Prasad007 said:
Please reflash with a stock ROM that contains DBDATA and use a .pit file for repartitioning... That should fix your phone!
Click to expand...
Click to collapse
Yep!
@OP Download this package : http://hotfile.com/dl/130600047/b70801e/I9100XXKI3.rar.html
And then, in ODIN, put :
.PIT -> PIT
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
Toggle repartition, and those 2 standard ticks. DO NOT TICK ANYTHING ELSE.
That WILL fix your phone Bootloops means that you soft bricked it. Flashing a new ROM + PIT always fixes a bootlooped device.
Prasad007 said:
Please reflash with a stock ROM that contains DBDATA and use a .pit file for repartitioning... That should fix your phone!
Click to expand...
Click to collapse
Could you link to a ROM with a .pit file, have not found any. Thanks!
Also, I tried flashing to CM7 again with ClockworkMod Recovery and it now said:
E:Error in /sdcard/cmgs.zip
(Status 7)
Installation aborted
Is that bad?
The amount of bad advice in this thread is shocking.
Do you actually have an I9100?
My first thought from your original post is that you didn't flash twice in succession, and the flash you did do was practically instant.
Regarding your last post, status 7 is usually when you're trying to flash something not meant for your device.
oinkylicious said:
The amount of bad advice in this thread is shocking.
Do you actually have an I9100?
My first thought from your original post is that you didn't flash twice in succession, and the flash you did do was practically instant.
Regarding your last post, status 7 is usually when you're trying to flash something not meant for your device.
Click to expand...
Click to collapse
I have an I9100 and I got the CyanogenMod from the official website where I chose my device.
The first flash was pretty fast yes.
oinkylicious said:
The amount of bad advice in this thread is shocking.
Do you actually have an I9100?
My first thought from your original post is that you didn't flash twice in succession, and the flash you did do was practically instant.
Regarding your last post, status 7 is usually when you're trying to flash something not meant for your device.
Click to expand...
Click to collapse
Wrong.
10 chars.
Phistachio said:
Yep!
@OP Download this package :
And then, in ODIN, put :
.PIT -> PIT
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
Toggle repartition, and those 2 standard ticks. DO NOT TICK ANYTHING ELSE.
That WILL fix your phone Bootloops means that you soft bricked it. Flashing a new ROM + PIT always fixes a bootlooped device.
Click to expand...
Click to collapse
Thanks man! You saved me!
I was seriously going to stay up all night trying to fix this and skip school tomorrow...
But I still want a custom ROM
Is there a better way than booting into ClockworkMod Recovery and installing zip file from sd card?
Also, any idea about why all this would happen to me? I got all the tutorials on an Icelandic forum where a person with the same phone did exactly what I was going to do and it worked perfectly for him, and I have gone over the steps many times, I did not screw up.
How to flash CM7
1) Flash a kernel with CWM, CF-root will do
2) Download CM7 zip and put it in your internalSD card
3) Boot into CWM
4) Flash CM7 zip
5) Reboot into CWM
6) Flash CM7 zip again
7) wipe cache/data/dalvik cache
6) reboot and wait for upto 10min for it to boot.
You HAVE to flash the CM7 zip twice.
Also you NEVER need to use the .pit, also never tick repartition, a bad flash with repartition ticked is a one way street to hardbrick land.
himmip said:
Thanks man! You saved me!
I was seriously going to stay up all night trying to fix this and skip school tomorrow...
But I still want a custom ROM
Is there a better way than booting into ClockworkMod Recovery and installing zip file from sd card?
Also, any idea about why all this would happen to me? I got all the tutorials on an Icelandic forum where a person with the same phone did exactly what I was going to do and it worked perfectly for him, and I have gone over the steps many times, I did not screw up.
Click to expand...
Click to collapse
Ideally, you:
1. Flash a stock ROM via ODIN
2. Flash CF-Root via ODIN
3. Flash a custom ROM such as CM9 via CWM Recovery
Ok thanks guys!
And just to be sure, I went here: http://www.cyanogenmod.com/devices/samsung-galaxy-s2 and was going to download nightly, or is their anything else you would recommend more?
himmip said:
Ok thanks guys!
And just to be sure, I went here: http://www.cyanogenmod.com/devices/samsung-galaxy-s2 and was going to download nightly, or is their anything else you would recommend more?
Click to expand...
Click to collapse
Only this: http://forum.xda-developers.com/showthread.php?t=1410400
Prasad007 said:
Only this: http://forum.xda-developers.com/showthread.php?t=1410400
Click to expand...
Click to collapse
Not sure if I want experimental ROM, I would also like to be able to restore my apps with Titanium Backup
himmip said:
Not sure if I want experimental ROM, I would also like to be able to restore my apps with Titanium Backup
Click to expand...
Click to collapse
The stable build is much older and actually less stable than the newest nightly.
Also you can restore user apps with titanium backup, just not system apps.
himmip said:
Not sure if I want experimental ROM, I would also like to be able to restore my apps with Titanium Backup
Click to expand...
Click to collapse
You can restore non-system apps, just not their data.
Prasad007 said:
Ideally, you:
1. Flash a stock ROM via ODIN
2. Flash CF-Root via ODIN
3. Flash a custom ROM such as CM9 via CWM Recovery
Click to expand...
Click to collapse
My phone is really starting to annoy me now.
I put a stock ROM on the phone and then flashed CF-Root and when I boot up in CWM and select something it just displays the loading sign and then I hit the power button and I'm back on the main menu of CMW, doesn't matter what I select it only displays the loading sign and it doesn't go away.
It really sucks, I had put all the CM9 files on the SDcard and was ready to go.
EDIT: Never mind guys, finally got it to work Thanks for your help!
himmip said:
My phone is really starting to annoy me now.
I put a stock ROM on the phone and then flashed CF-Root and when I boot up in CWM and select something it just displays the loading sign and then I hit the power button and I'm back on the main menu of CMW, doesn't matter what I select it only displays the loading sign and it doesn't go away.
It really sucks, I had put all the CM9 files on the SDcard and was ready to go.
Click to expand...
Click to collapse
If the Home button doesn't work for you, try selecting with the power button once inside CWM Recovery..
Phistachio said:
That WILL fix your phone Bootloops means that you soft bricked it. Flashing a new ROM + PIT always fixes a bootlooped device.
Click to expand...
Click to collapse
seconded...
Don't panic dude, it happens sometimes Keeping cool is the key to fixing your phone without making it worse than it already is... I can't count the times this has happened to me already, and there ain't nuffin like a good 'ole repartitioning to set things straight (and show the damn contraption who's boss around these here parts.. I hate those stupid machines to whom nobody has ever taught that Man's genius INVARIABLY always triumphs over dumb and inert matter.. )
(although I almost never flash the whole ROM back on : most times flashing the .PIT file and rebooting the device does the trick -unless it's an installed app which caused the trouble in the first place, in which case you're better off starting over from scratch than wasting time trying to debug the problem)
N.B : don't forget to flash the "old bootloader" too, AFTER you've flashed the PIT and rebooted the device (or at least rebooted the recovvery, to check that it boots off a valid partition), I've noticed the new one can give a lot of weird and unpredictable behaviors when used in conjunction with root and a CMx ROM.
---------- Post added at 01:36 PM ---------- Previous post was at 01:28 PM ----------
himmip said:
My phone is really starting to annoy me now.
I put a stock ROM on the phone and then flashed CF-Root and when I boot up in CWM and select something it just displays the loading sign and then I hit the power button and I'm back on the main menu of CMW, doesn't matter what I select it only displays the loading sign and it doesn't go away.
It really sucks, I had put all the CM9 files on the SDcard and was ready to go.
EDIT: Never mind guys, finally got it to work Thanks for your help!
Click to expand...
Click to collapse
I was going to ask : have you flashed the CM rom twice, and flashed the google apps pack BEFORE even rebooting the phone ? It's almost always mandatory to do this precise sequence, the installation routine of the CM ROM is not quite perfect -far from it, actually..
Hi all,
I was running XWLPT and decided to try Chameleon 1.3. After flashing, it would not boot up. I've tried all kinds of things for the last 2 days, and read quite a bit. I've even tried the method in this thread http://forum.xda-developers.com/showthread.php?t=1457458
At the moment, I can get into recovery and I can get to download (power+vol down+middle button). But it's stuck at the Galaxs SII GT-I9100 very beginning boot up. Nothing seems to be working. I've tried several pit repartition and I know it's risky. But at this point, I have nothing to lose I guess.
Can anyone help?
sooby77 said:
Hi all,
I was running XWLPT and decided to try Chameleon 1.3. After flashing, it would not boot up. I've tried all kinds of things for the last 2 days, and read quite a bit. I've even tried the method in this thread http://forum.xda-developers.com/showthread.php?t=1457458
At the moment, I can get into recovery and I can get to download (power+vol down+middle button). But it's stuck at the Galaxs SII GT-I9100 very beginning boot up. Nothing seems to be working. I've tried several pit repartition and I know it's risky. But at this point, I have nothing to lose I guess.
Can anyone help?
Click to expand...
Click to collapse
Boot into recovery, wipe data (factory reset), wipe cache and try to flash the custom ROM again.
Good luck !
The issue is, I can't even wipe factory data. It will start and then just sits there, unable to complete the wipe. I'm so out of ideas.
sooby77 said:
The issue is, I can't even wipe factory data. It will start and then just sits there, unable to complete the wipe. I'm so out of ideas.
Click to expand...
Click to collapse
Have you tried upload stock rom to phone on download mode? I saw your checked link, maybe you should try with different stock roms like 2.3.5 and etc.. If you try that, what the say ODIN as error?
Flash a siyah kernel with odin.afther you have cwm...
Inviato dal mio GT-N7000 con Tapatalk 2
First of all stop doing things that you are not sure about...
If you can get into Recovery then your problem is simple.
1. Wipe Data/Factory Reset,
2. Wipe cache partition,
3. Advanced/Wipe Dalvik Cache,
4. Flash a new rom (from sdcars probably),
5. Wipe cache partition,
6. Advanced/Wipe Dalvik Cache.
Let me know if this helped.
Hey guys, I apreciate all the responses. panagiostis4te - I am unable to wipe data/factor reset. It just hangs trying to do that. I've let it sit and it never completes.
sinasi11 - ODIN never throws an error. Depending on what firmware I flash, it either get stuck at datafs or data. It just sits there. I've even left it overnight and nothing happens.
I was able to flash to completion a few or the 4.0.4 rom (XWLPF) and it would reboot, show the android logo with animated progress bar. Then it reboots and is then stuck at the Galaxy S2 very first boot screen. I'm so out of ideas.
sooby77 said:
Hi all,
I was running XWLPT and decided to try Chameleon 1.3. After flashing, it would not boot up. I've tried all kinds of things for the last 2 days, and read quite a bit. I've even tried the method in this thread http://forum.xda-developers.com/showthread.php?t=1457458
At the moment, I can get into recovery and I can get to download (power+vol down+middle button). But it's stuck at the Galaxs SII GT-I9100 very beginning boot up. Nothing seems to be working. I've tried several pit repartition and I know it's risky. But at this point, I have nothing to lose I guess.
Can anyone help?
Click to expand...
Click to collapse
Questions:
1 . Have you seen This Warning Thread before?
# I don't think so
2. Were you running a safe Custom kernel before flashing Chameleon?
# I don't think so.
Here are my conclusions
1.
You were affected by the infamous Brick bug.
# You should blame yourself for this, for apparently failing to read that sticky warning thread, or even ask questions before messing with your phone while running the Dreadful ICS 4.0.4 firmware!
2.
The reason why your phone is still partially coming on is because you have a partially insane emmc chip.
# If you were using a fully insane chip, your phone would just black out without any sign of life.
3.
Your Nand /Emmc chip is corrupt!
4.
You can try combinations of pit file and ICS bootloader (where suggested). Who knows, you might be lucky
# Visit here and try the suggested solution
## If it doesn't work, then you can try the combinations suggested here.
5.
Jtag service will probably not work for you.
6.
The only (probably) solution (if the suggestions in 4. doesn't work for you), will be for you to replace the motherboard of your phone.
# Changing motherboard costs between $120 to $200
7.
If your phone is still under a valid warranty, the best solution would be to send it to Samsung Service center. Repair if free.
Sorry about what happened to your phone, but you really must shoulder the blame!
jokesy - thanks for the suggestions. I accept the blame. I was running stock and I read the Chameleon 1.3 thread and didn't see any warnings. I thought everything was safe. I guess lesson learned the hard way!
sooby77 said:
jokesy - thanks for the suggestions. I accept the blame. I was running stock and I read the Chameleon 1.3 thread and didn't see any warnings. I thought everything was safe. I guess lesson learned the hard way!
Click to expand...
Click to collapse
have tried my suggestion 4 yet? any news?
It's a Monday and I've got lots of things I need to take care of I've tried some of the suggestions prior to starting this thread but I'm going to give it another shot. Meanwhile, I'm going to try and survive without a phone for a few days. I'm almost ready to give up. I'm going to work on it more tonight. Will post if I have questions. Thanks again jokesy!
jokesy - I want to report success. I tried several of the pit files and finally at
i9100_u1_02_20110310_emmc_EXT4--patched--brick-between-176-and-2323-MB--FACTORYFS-moved-by-2048-MiB.pit
I was able to get it to complete install and format with bootloaded. The device then booted up! I now have 9.5GB vs 11GB and that's OK. Thank you so much for your help. It's now not the perfect S2, but nevertheless, a usable one! I sincerely appreciated your help. Lesson learned truly the hard way!
sooby77 said:
jokesy - I want to report success. I tried several of the pit files and finally at
i9100_u1_02_20110310_emmc_EXT4--patched--brick-between-176-and-2323-MB--FACTORYFS-moved-by-2048-MiB.pit
I was able to get it to complete install and format with bootloaded. The device then booted up! I now have 9.5GB vs 11GB and that's OK. Thank you so much for your help. It's now not the perfect S2, but nevertheless, a usable one! I sincerely appreciated your help. Lesson learned truly the hard way!
Click to expand...
Click to collapse
Wow! that's a good news at least.
PS: Always try to go through all the sticky threads, they are made for some reasons. Also if you are not sure about something, search, if you can not find clear answers, then ask questions.
Enjoy your phone
Jokesy said:
Wow! that's a good news at least.
PS: Always try to go through all the sticky threads, they are made for some reasons. Also if you are not sure about something, search, if you can not find clear answers, then ask questions.
Enjoy your phone
Click to expand...
Click to collapse
A quick question. Now that the pit is different, I assume that the nandroid backup I made cannot be restored to the device anymore?
sooby77 said:
A quick question. Now that the pit is different, I assume that the nandroid backup I made cannot be restored to the device anymore?
Click to expand...
Click to collapse
I seriously don't know but if you have any important thing you want to extract from your backup, follow these steps:
1. Flash siyah kernel
2. boot to CWM recovery,
- dual boot options
- restore ROM to 2nd ROM (you need about 2.1 Gig free in your internal storage)
- done
3. Boot to your Second ROM
- Extract all info you need
4. Restore these info to your 1st ROM
5. you can delete the Second ROM when done, using the same dual boot menu in CWM recovery.
Thanks Jokesy. I did have 2 backups, Titanium and another backup app (name escape me at the moment). I think I'll restore app data and do it that way instead.
Just go back to original OS
sooby77 said:
Hi all,
I was running XWLPT and decided to try Chameleon 1.3. After flashing, it would not boot up. I've tried all kinds of things for the last 2 days, and read quite a bit. I've even tried the method in this thread http://forum.xda-developers.com/showthread.php?t=1457458
At the moment, I can get into recovery and I can get to download (power+vol down+middle button). But it's stuck at the Galaxs SII GT-I9100 very beginning boot up. Nothing seems to be working. I've tried several pit repartition and I know it's risky. But at this point, I have nothing to lose I guess.
Can anyone help?
Click to expand...
Click to collapse
You can go back to the original OS using Odin and a package found on many sites for the original Gingerbread that came on it... then go to Kies and update to the ICS and there you go. I have done this several times and unbricked mine after a mod. This was the best way for me.
Scott
sooby77 said:
A quick question. Now that the pit is different, I assume that the nandroid backup I made cannot be restored to the device anymore?
Click to expand...
Click to collapse
You said you have Titanium - it can restore elements out of a nandroid backup, almost everything, stright back into place. Much easier than second ROMs.
ScottsDesk said:
You can go back to the original OS using Odin and a package found on many sites for the original Gingerbread that came on it... then go to Kies and update to the ICS and there you go. I have done this several times and unbricked mine after a mod. This was the best way for me.
Scott
Click to expand...
Click to collapse
I've tried that and the flash would get stuck in Odin and never complete.
gyaku_zuki said:
You said you have Titanium - it can restore elements out of a nandroid backup, almost everything, stright back into place. Much easier than second ROMs.
Click to expand...
Click to collapse
Good to know. I am actually waiting for my microsd to sd adaptor to arrive. I accidentally formatted my microsd card with all my data in desperation of trying whatever method to format the device. I accidentally selected format emmc. Took out the card immediately, and am hoping to be able to unformat it in windows since it's using fat32. Fingers crossed!
Hi Guys,
Sorry to bother you with this, but I'm out of ideas...
I decided to root my i9100 using this guide9.
As I was doing this, the recovery rom would reboot when using the volume buttons to navigate (only on the first "page") - This was easily worked around by using the touchscreen, but now I'm wondering if this was the start of my issues...
I applied the SU busy box installer, and got root. I installed rom manager, and noticed that it seemed to lock up when doing certain things. I put this down to CWM saying there was no official mod for the i9100.
The next day I decided to try and install a CM10.1 nightly, so I took a backup, wiped cache and data, and applied the rom and gapps.
When I rebooted, the phone wouldn't finished booting, it just sat at the initial logo screen.
After that, I tried following this recovery guide but the odin flash failed at around 80% (I retried and the same happened again).
Since then I've had difficulty getting in to recovery mode. I've tried flashing various stock roms with odin, and trying to restore with Kies.
In Kies I get as far as it conencting to the phone in download mode, but it pops up a "notice" in a foreign language - presumably Korean (and I can't copy the text to even attempt a google translation).
I tried flashing Siyah-s2-v5.0.1 to get a different recovery - that seemed to have a garbled progress bar, before hanging when I tried to wipe /data again.
When I use odin to flash a stock rom - is it supposed to restore absolutely everything? I'm not sure how I'm still getting problems if this is the case. Any ideas on what to try next?
(The current stock rom I'm try ing to use is this one)
Let me know if I'm missing any info, and thanks in advance for any help.
Using rom manager would have been the start of your problems-not the temp cwm recovery in the rooting guide.
If you can boot into download mode then I would download LP7 stock rom, disable kies and flash that with Odin.
{go back to your iphone since you are an android noob}
Thanks for the reply.
Rom manager didn't work properly for me, so I stopped using it. I used the temp cwm recovery to install the CM nightly.
I can boot in to download mode, but I've already tried an LP7 rom, - as with the others, it doesn't boot.
Any ideas on how to tell why it isn't booting? logcat doesn't seem to want to to work. Not sure if it's broken / too early in the boot process / etc
Silly Billy said:
Thanks for the reply.
Rom manager didn't work properly for me, so I stopped using it. I used the temp cwm recovery to install the CM nightly.
I can boot in to download mode, but I've already tried an LP7 rom, - as with the others, it doesn't boot.
Any ideas on how to tell why it isn't booting? logcat doesn't seem to want to to work. Not sure if it's broken / too early in the boot process / etc
Click to expand...
Click to collapse
I9100 right?
Try this:
- Download this ROM.
- Kies installed? uninstall it, re install it. Close it all up with Task manager (3 or 4 applications running).
- Flash ROM via Odin (CSC, MODEM, PHONE).
- If that doesn't fly, try another usb port & usb cable. Another PC would also be recommended.
- Repeat the process.
- Still no luck? try flashing a previous siyah version.
- No go? repeat all the above.
- Let us know how you did.
gastonw;37017081- Download this ROM.[/QUOTE said:
Thanks, I'll give it a go. (Will take a while for the file to download from hotfile...).
Are odin images for stock roms supposed to restore the stock recovery, or do they leave that alone?
Click to expand...
Click to collapse
As a matter of interest, how far did you go with Phistachios repair guide.
{go back to your iphone since you are an android noob}
Silly Billy said:
Thanks, I'll give it a go. (Will take a while for the file to download from hotfile...).
Are odin images for stock roms supposed to restore the stock recovery, or do they leave that alone?
Click to expand...
Click to collapse
Focus on getting a ROM to boot.
That ROM will install stock recovery.
gastonw said:
Let us know how you did.
Click to expand...
Click to collapse
For some reason, I can't get Odin to flash that rom - it just hands for a while at the start of data.img, before saying "Complete(Write) operation failed."
There a .pit file in the archive, although the link says not to repartition (so I didn't).
Some roms seem to get written, some don't, I'm not sure why...
theunderling said:
As a matter of interest, how far did you go with Phistachios repair guide.
Click to expand...
Click to collapse
Odin failed about 80% through flashing (step 4, after taking the ICS steps). I tried flashing the kernel afterwards, which flashed, but didn't help with my boot issues.
gastonw said:
Focus on getting a ROM to boot.
That ROM will install stock recovery.
Click to expand...
Click to collapse
Of course, I was just trying to get a better understanding of how things work - I'd settle for anything booting right now.
I was meaning how far did you go with his guide.He says (near the end) to flash a bootloader/kernel/rom.
You can try everything in his guide, but understand about the risks involved with pit and bootloaders.
{go back to your iphone since you are an android noob}
theunderling said:
I was meaning how far did you go with his guide.He says (near the end) to flash a bootloader/kernel/rom.
You can try everything in his guide, but understand about the risks involved with pit and bootloaders.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
He's right.
Keep trying, consider pit files & bootloaders as a last resort.
Tried everything?
Used another usb cable for the flash? tried in another PC? tried in a laptop?
Are you sure kies is all shut down?
I've read about so many people having the same issue than you, they keep on flashing as in trial & error and most times they come out winners.
GL!
gastonw said:
He's right.
Keep trying, consider pit files & bootloaders as a last resort.
Tried everything?
Used another usb cable for the flash? tried in another PC? tried in a laptop?
Are you sure kies is all shut down?
I've read about so many people having the same issue than you, they keep on flashing as in trial & error and most times they come out winners.
GL!
Click to expand...
Click to collapse
I guess I'll keep at it then.
I'd tried another cable with kies shut down. Just tried a different machine, and flashed the ROM you suggested with heimdall. It flashed without complaining (unlike odin), but I'm still getting a boot loop.
Looking at the initial recovery guide I was following - I suspect that I might've flashed the bootloader (the guide shows in bold which file goes in which box, so I probably loaded them all). Maybe this is the source of my troubles...
I also noticed that heimdall can pull data from the phone too - if I can pull and mount these, am I likely to find any useful log files?
For completeness (and anyone else who finds themselves with the same issue): It seems I hit the EMMC brick bug, which rendered some of my EMMC storage unusable.
This helpful chap came up with a workaround to partition around the dead space. (Please read the post carefully and make sure this really is your problem before flashing!)
That method will let you know what part of your memory is corrupted. It's done via recovery as far as I remember.
Did you bring your device back to life?
Sent from the little guy
gastonw said:
That method will let you know what part of your memory is corrupted. It's done via recovery as far as I remember.
Did you bring your device back to life?
Click to expand...
Click to collapse
Yes, that's right. IIRC, I flashed a working recovery with Odin, then did most of the work from adb shell.
I got my device back to life for the most part. I get the occasional hang but haven't investigated much (have since bought a Nexus 4, so not using the S2 so much).
Just thought I'd share for the next poor soul who has the same problem
Hi everyone,
I gave it a shot at rooting my phone and upgrading it from android 4.0.3 to 4.2.1 (rootbox) but I failed miserably. Somewhere in between the phone got stuck at that warning yellow marker and it would only allow me to get into download mode. After trying 5-6 different firmware versions, I finally managed to get one of them to work with Odin and the phone works once again but this firmware version does not work with kies.
I have no idea what the original version was, but I can get all the details from an identical phone from the same operator if you tell me what would be needed. I know it is a silly question, but is there a way to download the firmware from another identical phone used by the same operator?
I want to either restore the phone to a firmware version of local Swiss operator or properly manage to upgrade the firmware to a light version of android so I won't have to deal anymore with all those useless default apps which start automatically and eat up the battery.
I welcome any and all advices.
Thanks in advance.
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
You can download stock from
http://www.sammobile.com/firmwares/ just search for your phone and carrier then flash back to stock.
As the previous post said did you wipe first? Try a factory reset then flash the rom.
Sent from my GT-I9100 using xda app-developers app
danskiro said:
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
Click to expand...
Click to collapse
Thanks a lot for the help. With this new firmware on I finally managed to install RootBox 3.8 with Android 4.2.2.
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
gn82 said:
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
Click to expand...
Click to collapse
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
WardenBerret said:
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
Click to expand...
Click to collapse
Thanks for the feedback. Be it basic or not, it simply does not work. I used the basic Rootbox as described in this thread.
1. No matter how much I move my fingers on the screen no menu appears
2. System settings >> Sound >> "vibrate on touch" is disabled yet the phone vibrates when I type on the screen keyboard which is really annoying to others if I am in a meeting ... I googled for about 6 hours for a solution and when I failed to find one I posted here. I am sure that the time of everyone here is quite precious I would never want to waste it.
Flash stock jb with mobile odin and that's that.
Sent from the little guy
gastonw said:
Flash stock jb with mobile odin and that's that.
Sent from the little guy
Click to expand...
Click to collapse
Thanks a lot gastonw. I am now cMIUI which should be based on CM10 and even though it is based on Android 4.1.2 instead of 4.2.2 it is still running great.
Good news then
Sent from the little guy
Stuck at samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Click to expand...
Click to collapse
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
now trying to install a stock rom
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
algorithm101 said:
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
Click to expand...
Click to collapse
If you're attempting to flash a stock ROM through CWM recovery, stop now. That'll never work. The only way to flash a stock ROM is to use Odin, Mobile Odin (which in your case won't work, requires phone to boot) or Heimdall (I've never used this personally). So if you're using recovery, DON'T flash stock. You have two options to flash a ROM at present:
1) Stock ROM using Odin
2) Custom ROM using CWM recovery.
Done and working Thanks a Lot
Hopper8 said:
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
Click to expand...
Click to collapse
I flashed into stock rom XXLSJ variant. phone is working fine but lost access to root. in order to regain recovery menu i rooted my phone.
1. Now i want to backup my ROM using titanium backup. But its stuck at Gaining Root Access Screen What do i do now?
2. Stweaks,Super User and CWM have disappeared how do i get it back??
3. Strange thing Whatsapp is not working Unable to connect using my datapack
4. Can i Software update irrespective of the JB Stock ROMs region I am from.
Good job getting it working again now, time for you to do some reading. Read about what flashing a custom kernel will do for you. Then pick one that's compatible with your firmware and flash it.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Stuck on boot logo
Hi i just flashed the stock firmware acquired from this link:
http://www.sammobile.com/firmwares/3/?download=12748
I got all green in Odin v1.85 but it is stuck on the boot logo
I have rooted/flashed my phone many times so I'm quite confused.
Help much appreciated!!
Wipe data/factory reset?
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Which is the main stock firmware for the i9100?
Hi I am using a vodafone UK branded i9100 firmware and recently decided to cancel my contract. I would like to flash to a stock JB but im not sure which is the right one to download.
I checked the firmware on sammobile but still unsure. Please see attached file.
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
gastonw said:
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
Click to expand...
Click to collapse
Can you flash any s2 stock rom? I see there is difference in the modem code for different countries...
I have
PDA: I9100XWLSH
CSC: I9100OPSLSB
MODEM: I9100XXLS9
So i belive only this ver of stock rom can be flashed???
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick