Related
Hi everyone this is my first post. I have serious trouble. I bought a X10i few days back it was slow, I upgraded it using PCC. I was working fine but than i give it to my bro, it again slowed down and used to stuck so he restored it but dont know what happened it didnt complete. Now when i push the power button it vibrates and green light blinks but no response the screen remains black . I have no idea wat firmware it have and wat baseband it have. I used the flash tool 0.3.0, 0.2.9, 0.2.8 when i flash the firmware 2.1.A.045 global GGL, 3.0.1G.0.75 global ggl, 2.3_aro it goes into flash mode but at one stage or another it gives an error messsage "ABORT FLASHING" and somthing about turning on the debugging mode. I also used PCC and SEUS but it aborts in during installation, I than tried flash tool 0.2.5 and it flashed the X10i and give me message of flashing complete i did it with the firmware mentioned above but again. When i turn on the phone it just vibrates and green light blinks and nothing else even for two hours .
SO PLEASE I NEED HELP WHAT SHOULD I DO. NO SE Costumer Services here
civic_minded said:
Hi everyone this is my first post. I have serious trouble. I bought a X10i few days back it was slow, I upgraded it using PCC. I was working fine but than i give it to my bro, it again slowed down and used to stuck so he restored it but dont know what happened it didnt complete. Now when i push the power button it vibrates and green light blinks but no response the screen remains black . I have no idea wat firmware it have and wat baseband it have. I used the flash tool 0.3.0, 0.2.9, 0.2.8 when i flash the firmware 2.1.A.045 global GGL, 3.0.1G.0.75 global ggl, 2.3_aro it goes into flash mode but at one stage or another it gives an error messsage "ABORT FLASHING" and somthing about turning on the debugging mode. I also used PCC and SEUS but it aborts in during installation, I than tried flash tool 0.2.5 and it flashed the X10i and give me message of flashing complete i did it with the firmware mentioned above but again. When i turn on the phone it just vibrates and green light blinks and nothing else even for two hours .
SO PLEASE I NEED HELP WHAT SHOULD I DO. NO SE Costumer Services here
Click to expand...
Click to collapse
Could be a hardware LCD problem.
If it was lcd problem it must have sound and alerts but nothing
Try this: http://forum.xda-developers.com/showpost.php?p=17404856&postcount=4
thanks i will try any download links for the stock firmware
civic_minded said:
thanks i will try any download links for the stock firmware
Click to expand...
Click to collapse
Check the firmware or flash tool thread here or in the development forum.
I tried that too same result . What kind of forum is this no gurus or experts here who can give an expert advice or suggestion. Too much disappionted
only another "amateur" suggestion i'm afraid.
1) pull out battery (leave for 30 secs)
2) replace battery/DO NOT turn on
3) download a fresh install of SEUS.
4) run SEUS and follow instructions, complete as instructed.
5a) turn on phone, if fixed - yipee,
5b) if not - plug into usb and see if device shows in "computer"
6) (if 5b=yes) you know the phone is at least "contactable". good place to start for further troubleshooting.
7) post your results and be patient my friend, xda (x10) is currently up to its knees in new toys (unlocked bootloader) so people might take a moment to answer you.
hit thanks if i helped, seems my count is low no idea why, i think i'm helpful
Again I installed the fresh SEUS and did as instructed and no luck same result. It completely downloads the firmware but when it comes to installing the firmware its aborts. When i connect X10i to the pc it detects it as "SMEC Flash device" in device manager.
Further instruction needed
HELP!!!!!!!!!!!!!!!!!!!!
their is no firmware for so which fw should i use for flash and i dont know if the set came from other country so which fw should flash it with
If you plug in to your pc and open flashtool what does it (flashtool) say??
Sent from my X10i using XDA App
civic_minded said:
I am living in Pakistan and their is no firmware for so which fw should i use for flash and i dont know if the set came from other country so which fw should flash it with
Click to expand...
Click to collapse
Global generic
sounds silly, but charge the phone and make sure its not just really flat?
civic_minded said:
I am living in Pakistan and their is no firmware for so which fw should i use for flash and i dont know if the set came from other country so which fw should flash it with
Click to expand...
Click to collapse
I am no "Amateur or Noob", I gave you the reflashing options, as I said, if no reflashing option available here doesn't work, then it's probably a hardware issue or you're simply doing something wrong.
"[email protected] "
When i plug it into PC and flash tool is on, flash tool recognizes it and the phone can go into flash mode as well but if i go for root option than it say to connect the phone in usb and turn off the debugging
civic_minded said:
"[email protected] "
When i plug it into PC and flash tool is on, flash tool recognizes it and the phone can go into flash mode as well but if i go for root option than it say to connect the phone in usb and turn off the debugging
Click to expand...
Click to collapse
Debug mode has to be turned on in application settings in order for flash tool to be able to root the phone. Therefore all settings except flash option will be disabled.
+1, if flashing did not work then I'm afraid its out of my league! Good luck anyway, and remember, u catch more bees with honey.
Sent from my X10 using XDA App
[email protected] said:
+1, if flashing did not work then I'm afraid its out of my league! Good luck anyway, and remember, u catch more bees with honey.
Sent from my X10 using XDA App
Click to expand...
Click to collapse
thanks for the advice and i dont know why you guys are getting so much sentimental on what i said
Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.
Hello gurus,
I am stupid.
I did not backup my Firmware.
I did not even look at what version it is...
Was so in a hurry to install Litening Rom 6.1
Now I have a pb.
Flashed via ODIN failed.
now I get Screen of death.
I can connect to ODIN and it recognizes the phone.
What do I need to flash ?
I tried few things... but didn't work.
I even tried to play around with the files... and found that the
problem is that sbl.bin and boot.bin seem to be protected...
whenever they are present in the file I am flashing ,I get an failed.
But when I remove those 2 files from the tar file , then It flashes normally , no error... but the phone does not boot... gets stuck at the Samsung I9100G writing screen.
Please help.. the phone is not mine ! It is a friend's ! Silly me right ?
Thanks for your help.
Can you enter to download mod ?
1. Take off the battery during 5 minutes
2. Your phone will be disconnected at your computer
3. Download the driver of your phone and install it
4. Take ON your phone and try to enter to the download MOD
5. Now you can connect your phone to Odin and normaly your computer recognize your phone
it worked for me and i hope it will be the same for you.
My problem is what firmware I should install !!!!
the PC recognizes the Phone already !!
Stock firmware for i1900 G is what you require .
jje
And I can find this where please ?
where do you live ?
Have you disconnected your phone at your computer before try to enter in download mod ?
Try that, take off the battery and press Volume down and Home, now plug the battery.
Normaly you enter to download mod.
pierreammoun said:
And I can find this where please ?
Click to expand...
Click to collapse
TRY the search button .Or even GOOGLE .
Might even be a 1900 G thread .
jje
I posted in your other thread in "Android Development", didn't see this one here.
Get your firmware from http://www.sammobile.com/!
once I tried to boot my phone on safe mode after that my phone got dead,i tried to update using seus,every thing end succesfully but still not booting
after that I flashed using flash tool it also end succesfully but still not booting
then I tried wotan server then also its not booting
I have some questions to ask
is it possible to enable debugging on in a dead phone?
whats hdr block uploading error(I got this error when I used setool)?
I cant enable fastboot to unlock bl,any way to do that?
is my phone permanently bricked?
led light indication and a single vibration left in my phone,my phone is unrooted
can any expert show step by step procedure to unbrick my phone,noobs atleast share your ideas,
007snz said:
once I tried to boot my phone on safe mode after that my phone got dead,i tried to update using seus,every thing end succesfully but still not booting
after that I flashed using flash tool it also end succesfully but still not booting
then I tried wotan server then also its not booting
I have some questions to ask
is it possible to enable debugging on in a dead phone?
whats hdr block uploading error(I got this error when I used setool)?
I cant enable fastboot to unlock bl,any way to do that?
is my phone permanently bricked?
led light indication and a single vibration left in my phone,my phone is unrooted
can any expert show step by step procedure to unbrick my phone,noobs atleast share your ideas,
Click to expand...
Click to collapse
\
go here http://forum.xda-developers.com/showthread.php?t=1324707
i think this will solve your problem..
I will try that akshayy bro
not working bro
repair with pcc, install both kernel and ROM
i will try pcc
i repaired with seus,then installed both kernel and rom still not booting,
tell me exact what's happening and where is is stopping. i assusme you have still locked bootloader.
metalrawk said:
tell me exact what's happening and where is is stopping. i assusme you have still locked bootloader.
Click to expand...
Click to collapse
bro
what should I do? can you tell me exact step by step procedure,i think I have all required files
Hi, first of all i think my issues had already been solved
but for other LG smartphones, not D618.
My problem occurred when I playing around with hidden menu, and I hit reset button on the FOTA menu,
and then my phone restart and stuck in a screen that I never seen before, the screen show three line of text:
● FOTAFS_Open/cache/fota/log/FSUA_LOG_000.txt, 0, No such file
● FOTAFS_Create/cache/fota/log/FSUA_LOG_000.txt, 66, No such file
● FOTAFS_Close 0
So I googled about that and I found on a Vietnamese forum that it can be fix using LG FlashTool. But the problem is the tool need a correct .dll file for each device and I can't find anywhere the exact .dll file for LG G2 Mini D618. So if anyone could provide me the file I will be very thankful coz my phone been dead for 1 day.
I already tried flashing the kdz file, but no luck.
I tried to sideload stock recovery via adb but adb didn't detect my device.
Please help me solving this
Can you turn the power on your d618 for now? and what the displayed of the screen?
myllo.setya said:
Can you turn the power on your d618 for now? and what the displayed of the screen?
Click to expand...
Click to collapse
Yes I can turn device on but it keep looping on this screen
gesitkumara said:
Yes I can turn device on but it keep looping on this screen
Click to expand...
Click to collapse
Do you have a custom recovery installed?
If you connect it to PC, does it show up?
Can oyu get it to Download mode?
gesitkumara said:
Hi, first of all i think my issues had already been solved
but for other LG smartphones, not D618.
My problem occurred when I playing around with hidden menu, and I hit reset button on the FOTA menu,
and then my phone restart and stuck in a screen that I never seen before, the screen show three line of text:
● FOTAFS_Open/cache/fota/log/FSUA_LOG_000.txt, 0, No such file
● FOTAFS_Create/cache/fota/log/FSUA_LOG_000.txt, 66, No such file
● FOTAFS_Close 0
So I googled about that and I found on a Vietnamese forum that it can be fix using LG FlashTool. But the problem is the tool need a correct .dll file for each device and I can't find anywhere the exact .dll file for LG G2 Mini D618. So if anyone could provide me the file I will be very thankful coz my phone been dead for 1 day.
I already tried flashing the kdz file, but no luck.
I tried to sideload stock recovery via adb but adb didn't detect my device.
Please help me solving this
Click to expand...
Click to collapse
You don't need any .dll , the LG FlashTool is designed for all LG smartphones, just follow my guide : http://forum.xda-developers.com/g2-mini/general/guide-revert-to-stock-lg-softwareeasy-t2824479 , if you have any additional questions feel free to ask. , hope you're gonna fix your phone.
Vagelis1608 said:
Do you have a custom recovery installed?
If you connect it to PC, does it show up?
Can oyu get it to Download mode?
Click to expand...
Click to collapse
No, I'm still using stock recovery, the phone is rooted.
Yes I can get in to the download mode, I already tried flashing kdz and usually if the bootloop is on the lg logo, it can turn back on normal, but now it keep booting on that screen.
Rephosix said:
You don't need any .dll , the LG FlashTool is designed for all LG smartphones, just follow my guide : http://forum.xda-developers.com/g2-mini/general/guide-revert-to-stock-lg-softwareeasy-t2824479 , if you have any additional questions feel free to ask. , hope you're gonna fix your phone.
Click to expand...
Click to collapse
Hi, thanks for the guide, I will try it, I hope this method can fix it .
Rephosix said:
You don't need any .dll , the LG FlashTool is designed for all LG smartphones, just follow my guide : http://forum.xda-developers.com/g2-mini/general/guide-revert-to-stock-lg-softwareeasy-t2824479 , if you have any additional questions feel free to ask. , hope you're gonna fix your phone.
Click to expand...
Click to collapse
HI I already tried this, but when the LG software trying to download the firmware, it always quit around 50% and when I tried again about 3 times it always quit. Can I do "Upgrade recovery" in offline?
gesitkumara said:
HI I already tried this, but when the LG software trying to download the firmware, it always quit around 50% and when I tried again about 3 times it always quit. Can I do "Upgrade recovery" in offline?
Click to expand...
Click to collapse
i got same error too at the first flash. i think the firmware is corrupted. retry to download the firmware,i hope you can successfully flashing the firmware
Now my phone turn back on to normal, I finally took it to the LG service center, and they replaced my motherboard.
So if any of you guys experienced the same, I'm telling you there's no software solution to fix this, it seems because I rooted the phone and somehow it lock the motherboard when it trying to perfomed a FOTA update.