Related
Its was so cheap i could not resist... 5 screen protectors for 8$...
-quality not one of the best (see bottom part not perfectly good)
-reflections not always straight and has some colors like CD or something.
-its thick about 1mm it feels like solid protection not like the thin protectors which almost unnoticed this one like hardens the screen...
-very reflective but its ok for everyday use.
-after 3-4 days with this protector it did not has eve one scratch... and im not obsessed about guarding my device...i keep it in my pocket sometimes with other stuff... throw it in different places in my car cause i did not buy car holder yet... overall its durability is very good till now.
*pictures from polaris so quality very bad... in real its nor blurry and seen very clear.
cool! where did you get it?
frdrk said:
cool! where did you get it?
Click to expand...
Click to collapse
ebay.///////
gadgetshieldz by far the best and mine been on for 3 weeks now no probs.
adigraham said:
gadgetshieldz by far the best and mine been on for 3 weeks now no probs.
Click to expand...
Click to collapse
usually i use Martin-Fields protector its best from which i tried,
now i wanted to try mirrored one cause it looks good & this is the only one i found... if i'll find mirrored protector from known brand i'll definitely try it cause this one not the best quality.
I bought one of these from ebay and had to remove it strait away! The effect it has on screen visibility is outrageous. Like you said it adds a strange rainbow effect like you're looking at a CD. It also wasn't cut strait. Utter rubbish IMO.
The mirror effect did look cool though, and it yes was scratch resistant
It reads cool and I can't see the pictures....I never thought about using screen protector on my phone so it's...Desides, I always like the phone with large screen. Maybe I should go to ebay and get this one...
I ordered this case a while back, and I absolutely love it.
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45eeeac5fa
The one I ordered was a little cheaper, and didn't include the lcd protection, but the case is the same. Anyway, I think I paid around 8 bucks or so. I did have the body glove case, drilled a hole for the proximity sensor, but after a while, the case started to catch on the clear plastic sticker on the back of the lcd screen. It also started to catch on the side stickers beside the keyboard. This new case fits extremely well, and has yet to catch on anything. The only grip I have is that it is a little slick, but not enough to deter me. Just thought I'd share.
i got the exact same one man. love it
s0calstate0fmind said:
i got the exact same one man. love it
Click to expand...
Click to collapse
Yeah, it fits perfectly, plus it looks a lot nicer too. Every time I pull it out, everyone always asks me, "Whoa, what phone is that?" I hated having to wear that belt clip for it. Now, I can leave it in my pocket without the side bag on my belt.
Could you post some pics of the phone inside the case plz?
An To Mi said:
Could you post some pics of the phone inside the case plz?
Click to expand...
Click to collapse
Yeah, no problem. My phone is really dirty, but I was in a hurry. Looks really nice I think. I get all kinds of compliments from it.
will this def not fit an at&t tilt 2??
Thanks for posting the pics! I agree, it does look good. I'm gonna order one now
Here's a link for a "clear enough"(actual color listed as Smoke Transparent) hard case for Sprint/TMobile TP2s
My first post to these forums, I don't have a TP2....yet, but I'll pull the trigger as soon as I've finished researching a few more things. All the information seems to be here, I just need to read through it all.
http://cgi.ebay.com/Smoke-Trans-Case-for-HTC-Touch-Pro2-CDMA-Sprint-Verizon_W0QQitemZ280417518162QQcmdZViewItemQQptZPDA_Accessories?hash=item414a2fc252
bubbaclutch said:
will this def not fit an at&t tilt 2??
Click to expand...
Click to collapse
This would be perfect for my Tilt 2...any thoughts?
I've read the phones are slightly different sizes...
pimp4cheddar said:
This would be perfect for my Tilt 2...any thoughts?
I've read the phones are slightly different sizes...
Click to expand...
Click to collapse
If they are different sizes, I doubt it would fit, but I'm not sure. I did however find a couple on ebay for the tilt 2. I'm sure you can find some more out there.
http://cgi.ebay.com/NEW-Crystal-Cle...wItemQQptZPDA_Accessories?hash=item5636e89596
dougstoner said:
If they are different sizes, I doubt it would fit, but I'm not sure. I did however find a couple on ebay for the tilt 2. I'm sure you can find some more out there.
http://cgi.ebay.com/NEW-Crystal-Cle...wItemQQptZPDA_Accessories?hash=item5636e89596
Click to expand...
Click to collapse
I saw this one earlier...
I'm actually looking for a black one...and I'm only going to use the back (battery) cover...I hate covers on the front of my phones...
Thanks for the link!
dougstoner said:
Yeah, no problem. My phone is really dirty, but I was in a hurry. Looks really nice I think. I get all kinds of compliments from it.
Click to expand...
Click to collapse
I want a micro sd slot like that
i got the clear one and the brown rubber case...both fit great.
I have been waiting for them to start shipping the Garnet red case, the picture still shows coming soon, but it also shows now shipping. i ordered one yesterday, will be here in a few days.
just some fyi for those waiting/wanting a good red cover
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HK3HTRZD-GR
Hitch_Itch said:
I have been waiting for them to start shipping the Garnet red case, the picture still shows coming soon, but it also shows now shipping. i ordered one yesterday, will be here in a few days.
just some fyi for those waiting/wanting a good red cover
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HK3HTRZD-GR
Click to expand...
Click to collapse
I got the red. I already have the blue combo. I thought the blue looked good. But, damn, this red one. Holy hell it's sexy.
When you get it, would you mind sharing a pic of the screen without the clip cradle? Appreciate it.
KORM via the beast known as the Rezound.
txkorm said:
When you get it, would you mind sharing a pic of the screen without the clip cradle? Appreciate it.
KORM via the beast known as the Rezound.
Click to expand...
Click to collapse
I already got it in today...soooo here you go
If you want an idea of the true color of it, it's very similar to the red accents on the phone. It's just like a matte shimmer, if that makes sense. It looks even better in person, trust me.
EDIT: Oh, and korm, the color is a little darker than our beloved Scarlet, but it looks awesome with a big Double T on the screen
WasabiWa83 said:
EDIT: Oh, and korm, the color is a little darker than our beloved Scarlet, but it looks awesome with a big Double T on the screen
Click to expand...
Click to collapse
Haha.. That's really all that matters to me. It looks sweet. How's the size and feel? It's not too big is it?
KORM via the beast known as the Rezound.
txkorm said:
Haha.. That's really all that matters to me. It looks sweet. How's the size and feel? It's not too big is it?
KORM via the beast known as the Rezound.
Click to expand...
Click to collapse
I wouldn't say big at all. If you've used the Otterbox Commuter before, it's essentially the same size, just a little more protection. And it hugs the phone reeeeaally well. When I got the blue one, I thought the whole 6-prong thing would cause issues and stretch out. But the plastic is extremely strong and the rubber is thin, but super-high quality. I had to take the blue one off a bunch for battery pulls with all of the flashing I've done in the past few weeks. I was afraid it would start to stretch, but it was perfect every time. I expect nothing less from this red one. It's nice. Probably the first case I would say is actually worth the $30. Don't hesitate; just get it. It's worth it
Has anyone noticed the case does not have those 2 tiny holes in the back of the case? They would be just above the S on the back. Im told those 2 tiny holes in the back cover are for the phones antenna, it is said to help the reception.
Has your reception gone down? Check your -db with the cover on verses off.
that is the only thing I am concerned about, reception is -97db here at the house, yup pretty poor but I dont get any dropped calls, hopefully the cover wont cause problems
Hitch
Hitch_Itch said:
Has anyone noticed the case does not have those 2 tiny holes in the back of the case? They would be just above the S on the back. Im told those 2 tiny holes in the back cover are for the phones antenna, it is said to help the reception.
Has your reception gone down? Check your -db with the cover on verses off.
that is the only thing I am concerned about, reception is -97db here at the house, yup pretty poor but I dont get any dropped calls, hopefully the cover wont cause problems
Hitch
Click to expand...
Click to collapse
Blocking those holes does nothing to signal. It's all good. Same thing was asked about the Commuter case from Otterbox. You would essentially cover those holes anyway if you hold your phone when you talk.
WasabiWa83 said:
Blocking those holes does nothing to signal. It's all good. Same thing was asked about the Commuter case from Otterbox. You would essentially cover those holes anyway if you hold your phone when you talk.
Click to expand...
Click to collapse
Im Glad to here that. I noticed the Incipio has those holes in there case.
Thanks
Hitch
Just got mine and put it on. Looks 5 stars! Feel, so far 4 stars, which is pretty good since I never use a case. It's surprisingly thin..... I may change my mind when I'm sober, but very impressed..... Sound, 1star, my creeks like a MoFo. I was hoping the case would relieve me of creeks, not amplify them. Hopefully I installed it wrong. Anyone else getting creeks?
KORM via the beast known as the Rezound.
No creeks here, all is good for me
its looks like a glossy finish on the ones I'm seeing in this thread and on seidos site can anyone confirm??
trevorperry said:
its looks like a glossy finish on the ones I'm seeing in this thread and on seidos site can anyone confirm??
Click to expand...
Click to collapse
does have a shine, not like a high gloss paint finish, more like semi to mat finish
Thanks for the info I'll look for some more pictures around the net
Sent from my ADR6425LVW using XDA App
trevorperry said:
Thanks for the info I'll look for some more pictures around the net
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
I'll take a pic of mine and post here in a few for ya
Here ya go
2012-01-28 09.46.00 by kengod2001, on Flickr
Might be too shiny for me.
Sent from my ADR6425LVW using XDA App
I think this case looks really nice, but I'm concerned about those LTE holes that are covered on the back. I would think that HTC placed those holes there for a reason, and other cases do not block them. Hmm, trying to decide between this case and the Incipio.
cbbyers said:
I think this case looks really nice, but I'm concerned about those LTE holes that are covered on the back. I would think that HTC placed those holes there for a reason, and other cases do not block them. Hmm, trying to decide between this case and the Incipio.
Click to expand...
Click to collapse
I personally have not seen any difference with the holes covered.
KORM via the beast known as the Rezound.
cbbyers said:
I think this case looks really nice, but I'm concerned about those LTE holes that are covered on the back. I would think that HTC placed those holes there for a reason, and other cases do not block them. Hmm, trying to decide between this case and the Incipio.
Click to expand...
Click to collapse
I was worried about that to, I checked my db signal with and without the case on, It made no difference in signal and at my house the signal sux, -95db
I've been Googling, eBaying, and Amazoning (last fictional verb sounds kinda cool) for a common, flat case for my Tab 2 7.0.
It has become my number one remote control, so you can probably understand how uncomfortable a flip case is, adding an extra step every time I want to change a channel, or having a cover hanging (why in the world are 95% of the cases are now "folio"?!). Also, most cases either block the IR transmitter entirely, have some part obstructing it partially, making it mandatory to aim with "the" angle towards my TV set.
I have found a few silicon cases on eBay, but they have an S line, or weird X across the whole thing, that just make the device look fugly to me. No offense if someone likes it or has it, as we know, everyone has different taste.
I'd like to just get a regular, non-flip, non-folio, non-X-or-any-character-of-the-alphabet-drawn, plain cover, that protects the rear of my device, and doesn't obstruct the IR blaster at all. How hard can it be? The perfect fit for me would be a flat, matte black rubber thingy, with a hole where the blaster is... so simple, and inexistent! Maybe even better, a hard case.
Anyone found something, somewhere?
OtterBox
Samsung Galaxy Tab 2 7.0 Defender Series Case
I've looked but haven't found any.
I tried out the S curve case that was made for the GTab Plus and it fit horribly. It's too bad that the Gtab 2 isn't popular enough to have more cases. I was hoping for a Cruzerlite case, but I don't think it's gonna happen.
bark777 said:
OtterBox
Samsung Galaxy Tab 2 7.0 Defender Series Case
Click to expand...
Click to collapse
Yeah, I've seen it. I'm not sure it fits the "simple, flat" criteria, although I think I'd buy it if it didn't cost 1/3 of what my tablet did
I agree that Otterbox is pricey. I also hate the frame around the screen on the front.
Why not just get one of these cheap tpu style cases and just cut the tabs off that hold the cover?
Http://www.ebay.com/sch/i.html?_nkw...+case+flip+cover+tab+2+7&_osacat=0&_from=R405
Http://dx-box.com/book-cover-faceplate-for-samsung-galaxy-tab-2-p3100-7-case.html
gooffeyguy said:
I agree that Otterbox is pricey. I also hate the frame around the screen on the front.
Why not just get one of these cheap tpu style cases and just cut the tabs off that hold the cover?
Http://www.ebay.com/sch/i.html?_nkw...+case+flip+cover+tab+2+7&_osacat=0&_from=R405
Http://dx-box.com/book-cover-faceplate-for-samsung-galaxy-tab-2-p3100-7-case.html
Click to expand...
Click to collapse
That's exactly what I planned on doing if I couldn't find anything... get rid of the cover, and/or punch a hole for the IR sensor on the ones that are designed for P3100.
What about this one...
http://dx-box.com/rock-ultra-thin-nakedshell-faceplate-for-samsung-galaxy-tab-2-p3100-7.html
Says "P3100", but there's a 7.0 Plus in the pictures... who knows!
Got one, and it fits perfect! I'll post some pictures tomorrow.
PS: Anyone has tried matte/antiglare screen protectors? Been thinking about one, but not really convinced.
Try the Capdase silicone case for Tab 7.0 plus. Although mine is the folio type, (silicone case with IR blaster slot + leather folio) their plain silicone (w/o the leather case) seems exactly what you're looking for. Just plain flat black silicone, no x or s or whatever. just plain flat.
Ivan Fuentes Hagar said:
I've been Googling, eBaying, and Amazoning (last fictional verb sounds kinda cool) for a common, flat case for my Tab 2 7.0.
It has become my number one remote control, so you can probably understand how uncomfortable a flip case is, adding an extra step every time I want to change a channel, or having a cover hanging (why in the world are 95% of the cases are now "folio"?!). Also, most cases either block the IR transmitter entirely, have some part obstructing it partially, making it mandatory to aim with "the" angle towards my TV set.
I have found a few silicon cases on eBay, but they have an S line, or weird X across the whole thing, that just make the device look fugly to me. No offense if someone likes it or has it, as we know, everyone has different taste.
I'd like to just get a regular, non-flip, non-folio, non-X-or-any-character-of-the-alphabet-drawn, plain cover, that protects the rear of my device, and doesn't obstruct the IR blaster at all. How hard can it be? The perfect fit for me would be a flat, matte black rubber thingy, with a hole where the blaster is... so simple, and inexistent! Maybe even better, a hard case.
Anyone found something, somewhere?
Click to expand...
Click to collapse
Ivan Fuentes Hagar said:
Got one, and it fits perfect! I'll post some pictures tomorrow.
PS: Anyone has tried matte/antiglare screen protectors? Been thinking about one, but not really convinced.
Click to expand...
Click to collapse
Do the corners of that case create a bit of a bevel/lip where they clamp on the tab? In other words, when you put the tab face down on a desk/table, is there a space between the screen and desk/table or is it flush?
Ivan Fuentes Hagar said:
....
PS: Anyone has tried matte/antiglare screen protectors? Been thinking about one, but not really convinced.
Click to expand...
Click to collapse
I prefer the matte over the clear screen protector. The clear one gets sticky at times, the matte is always smooth and you don't have to worry about hairline scratches and reflections in your screen.
rsage said:
Do the corners of that case create a bit of a bevel/lip where they clamp on the tab? In other words, when you put the tab face down on a desk/table, is there a space between the screen and desk/table or is it flush?
Click to expand...
Click to collapse
Sorry I haven't taken the pictures! Yes, there is a little space.
MonJovi said:
I prefer the matte over the clear screen protector. The clear one gets sticky at times, the matte is always smooth and you don't have to worry about hairline scratches and reflections in your screen.
Click to expand...
Click to collapse
I hadn't thought of that, you're right. What about color loss?
Ivan Fuentes Hagar said:
...I hadn't thought of that, you're right. What about color loss?
Click to expand...
Click to collapse
Well that's a little compromise. Color is not as sharp and bright as the clear one but not by a big margin.
MonJovi said:
Well that's a little compromise. Color is not as sharp and bright as the clear one but not by a big margin.
Click to expand...
Click to collapse
I guess it's worth a try. I'll get a matte screen cover and see how it goes. Good input, thanks!
Now, the long overdue pictures . Since the back surface is mostly flat (that was the idea), I concentrated mostly on showing how it fits the tablet. My apologies for the narrow depth of field... unfortunately I didn't have my tripod's plate with me, so I had to take the pictures handheld, and the only way to get a steady shot was with a large aperture.
This is the general look of it:
rsage said:
Do the corners of that case create a bit of a bevel/lip where they clamp on the tab? In other words, when you put the tab face down on a desk/table, is there a space between the screen and desk/table or is it flush?
Click to expand...
Click to collapse
Hope this one answers your question!
Profile. Love the way it looks. Really cool match for the tab's back color.
Opposite angle.
Ivan Fuentes Hagar said:
Now, the long overdue pictures . Since the back surface is mostly flat (that was the idea), I concentrated mostly on showing how it fits the tablet. My apologies for the narrow depth of field... unfortunately I didn't have my tripod's plate with me, so I had to take the pictures handheld, and the only way to get a steady shot was with a large aperture.
Click to expand...
Click to collapse
That is exactly what I've been looking for...Thanx for the great pics...looks great...
Oh yeah...I placed my order for it because of ur pics...LOL...
Sent from my GT-P3110 using xda app-developers app
Ivan Fuentes Hagar said:
I guess it's worth a try. I'll get a matte screen cover and see how it goes. Good input, thanks!
Now, the long overdue pictures . Since the back surface is mostly flat (that was the idea), I concentrated mostly on showing how it fits the tablet. My apologies for the narrow depth of field... unfortunately I didn't have my tripod's plate with me, so I had to take the pictures handheld, and the only way to get a steady shot was with a large aperture.
This is the general look of it:
Hope this one answers your question!
Profile. Love the way it looks. Really cool match for the tab's back color.
Opposite angle.
Click to expand...
Click to collapse
Were did you purchase this case from?
http://dx-box.com/rock-ultra-thin-nakedshell-faceplate-for-samsung-galaxy-tab-2-p3100-7.html
Sent from my Nexus 4 using xda app-developers app
ls1xtreme said:
http://dx-box.com/rock-ultra-thin-nakedshell-faceplate-for-samsung-galaxy-tab-2-p3100-7.html
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
i bought today, hope its fast delivery
htcuser69 said:
i bought today, hope its fast delivery
Click to expand...
Click to collapse
Dealextreme tends to be somewhat slow compared to individual sellers from Ebay, I believe this is because DX is the "middleman" liasing between customers who place orders and the suppliers who advertise their products whereas on Ebay, the sellers are the suppliers who respond directly to customer orders.
Hey guys!
So I received my FlexiCase for the OnePlus 5 today! I can finally move away from my custom case.. (a oneplus 3 case with the camera slot cut out!) I am delighted to see that Orzly are one of the first big-name brands with their cases out! I had the FlexiCase for my OnePlus 3 last year and loved it, so purchased this one the moment I saw it up for pre-order on amazon.
Now lets get into the review!
One of the first things you see in the package when you open it is a letter from the companies co-founder, hoping that you like the product!
http://imgur.com/a/TpGJG
Now onto the packaging, its similar to other products. Dead front you can see through the clear piece of plastic a part of your case, and the rest of the white, orange and gray packaging is surrounding it. The back of it houses some information about Orzly, some social media handles and tells you how you can win some free prizes!
Taking the case out of the packaging, it is a flexible gel case, as the name implies. All the buttons are covered by the case, and the case has protruding areas, along with a gap between the volume up and down buttons to help you determine which is which!
Putting the phone into the case, all the ports, including the camera and alert slider line up perfectly as you can see in the images below! None of the microphones are covered, which is great seeing as I had read of a few companies had covered the one by the camera at the back! Speaker lines up perfectly, and there is ample room for your dash charge cable and headphone jack to fit in, without pushing up the case. The alert slider has a nice little touch, there is a little bit of a space behind it so that your thumb can fit in nicely, without having to struggle! It is actually very useful and you will be able to see it in the images where I compare it with the OnePlus3/3t FlexiCase. Around the back in the bottom right there is a small bit of Orzly branding, which isn't really too obtrusive and is very small.
http://imgur.com/a/wNlwp
There is a lip around the screen, which would be able to protect your device should you drop it and will help to protect you from scratches!
http://imgur.com/a/wEg9a
My opinions? This case is great for anybody who loves the thinness of the OnePlus 5. It sits nearly flush with the back, yet protects the camera. Even though it is thin, it protects the screen which is great! I personally got the clear one, but they do have other matte colours should you want them such as black, red and blue! A link to buy can be found here! (change .co.uk to .com or whatever depending on your location!)
If you have any questions about this case, feel free to ask below and I will reply!
Mine also arrived, pretty standard, good quality and it's nice to be able to see the phone!
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Mine also arrived today seems pretty good
Rebel7022 said:
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Click to expand...
Click to collapse
$100 on cases? Wow thats dedication! haha
nadejo said:
Mine also arrived today seems pretty good
Click to expand...
Click to collapse
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
nadejo said:
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
Click to expand...
Click to collapse
Ah yeah, this is the flexicase its a bit different. I used the orzly fusion bumper case mainly on my op3 last year, which would be an equivalent to that spigen i believe
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I have had the cases since early drop. I can tell you about the Karbon, red & black tpu, the ebony
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason
Click to expand...
Click to collapse
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
biglilsteve said:
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
Click to expand...
Click to collapse
Have to say the one case thats nearly clear which doesn't discolour (noticeably) is the Tech 21 variants, they have a mesh so it's no completely apparent.
But yea I learned long ago that clear cases are a no no, nicotine brown is not a good look.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
Click to expand...
Click to collapse
Aye it does go bad after a while, I had one years ago when i smoked and put two and two together, but it's just grime that it picks up, stick with smokey ones now or black.
Supposed they still get filthy but cant' see it as much.
Worst thing about it is they look amazing when you first get them
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well if your interested it think they also do solid colour version of the case.
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
nice one.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
They do but those aren't even shipping yet. When I ordered my black case on Amazon back on June 24th the listing said shipping would start on July 13th. I've already dropped my slippery OP5 once and have a small dent to show for it. I hope the case arrives while I still have something to protect with it.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same here. I loved the concept of a clear case to show off a nice phone. First time using a clear case was the one that came with my OPx. Didn't take long for it to start turning that nicotine brownish yellow color. (my bad smoking habit didn't help much of course) Got a black spigen case after that and haven't looked back.
I'm waiting for spigen to come out with one for the OP5 and hopefully they do so quickly. I nearly had a heart attack when I dropped it onto the concrete while exiting my work van. (chevy 3500 so It fell from a pretty good distance) Landed screen first but luckily the gorilla glass 5 held up. Ive also got one of the official OP wooden cases which has so far saved the metal finish from some minor scrapes and dings here and there.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yep I never buy perfectly clear cases anymore, they always go off colour and look dirty. I've gone with the Otterbox for my OP5 this time around, that might change if I start feeling it's too bulky. BUT I love the knowledge and reassurance of the protection it offers over other slim/flexi cases.
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others I've seen. hoping this stays the same!
Click to expand...
Click to collapse
Yeah, transparent plastic anything can vary quite alot I find. Some transparent stuff I've had discolors really easy, others last absolutely years without losing a single thing and still cooking crystal clear. (others, varying degrees in between). Have you got any pics of your 3T FlexiCase to show me how they hold up over the test of time? If it's not that bad, then I do like the idea of having transparent cases, because the phone itself seems pretty nice, so is nice to be able to see it through the case, especially stiff like the logo, etc.. But if it's bad, then would probably just go for a colored version instead.
Looks like even the colored ones are finally available now (even just yesterday, all but the transparent one were all showing on pre-order, so looks like t's a safe bet deliverywise for any of the colors either way now)
www.amazon.co.uk/dp/B072QX9H9G but I would still be keen to get your opinion on this, as transparent would have been my first choice, however it's a very good point that alot of people have raised, so I want to be extra specially careful to hear from real people who have used them before knowing which color to get. Main thing is I want it to look nice!
Thanks.