Related
i setup pattern instead of pin numbers.
the problem is anyway i swype through patterns, my phone unlocks.
pls help.
I got this after flashing firmware when I already had a pattern set up. Just go through the setup for the pattern again and it should persist.
johncmolyneux said:
I got this after flashing firmware when I already had a pattern set up. Just go through the setup for the pattern again and it should persist.
Click to expand...
Click to collapse
thank you
all sorted
do you experience a bad recognition, too? sometimes when I try to enter my pattern it recognizes my finger not from the beginning but in the middle of the movement. kind of annoying sometimes to swipe the pattern again and again.
That mostly happens when in a hurry. Doing it slowly and calmly works 100% but doing it in a hurry (while driving, ...) sometimes doesn't work right.
Hello everyone,
I found a big time glitch on the lock screen. If your screen is locked and you let it time out that top layer with the time on it appears when you cut it back on. Just move it out the way and your phone is unlocked without a pattern code needed. How do I stop this?!?!?
mtorre5 said:
Hello everyone,
I found a big time glitch on the lock screen. If your screen is locked and you let it time out that top layer with the time on it appears when you cut it back on. Just move it out the way and your phone is unlocked without a pattern code needed. How do I stop this?!?!?
Click to expand...
Click to collapse
DUDE, do you read any of tech blogs? This was reported over the weekend and ATT and Samsung are working on a fix. Just sayin its a known issue and I don't believe a fix has been issued.
Actually I dont, but thanks for the info
Go to
Settings/location and security/timeout
And set the lock screen to immediately
Sent from my SAMSUNG-SGH-I777 using XDA App
jank0023 said:
DUDE, do you read any of tech blogs? This was reported over the weekend and ATT and Samsung are working on a fix. Just sayin its a known issue and I don't believe a fix has been issued.
Click to expand...
Click to collapse
A fix has not been issued but a workaround has been.
I have a feeling none of you will like the actual fix. The work around more like a fix. The only bug here is the pattern unlock screen showed up when it shouldn't. And it has nothing to do with security breach or not.
mtorre5 said:
Hello everyone,
I found a big time glitch on the lock screen. If your screen is locked and you let it time out that top layer with the time on it appears when you cut it back on. Just move it out the way and your phone is unlocked without a pattern code needed. How do I stop this?!?!?
Click to expand...
Click to collapse
NO WAY! I'm so glad you pointed this out for all of the rest of us.
dayv said:
Go to
Settings/location and security/timeout
And set the lock screen to immediately
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Working as intended ... This is the setting to make it work how you want!!!!
my personal fix was to use No Lock to turn off that stupid swipe thing, and added WidgetLocker.
moopile said:
Working as intended ... This is the setting to make it work how you want!!!!
Click to expand...
Click to collapse
No, still not working properly. I hope at&t gets a fix soon
Sent from my SAMSUNG-SGH-I777 using xda premium
Dxtra said:
No, still not working properly. I hope at&t gets a fix soon
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I set my timeout to "Immediately", let the screen go off, and have to enter pattern to get back in.
Dxtra said:
No, still not working properly. I hope at&t gets a fix soon
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Here is how is suppose to work (when you have the timeout in Lock settings, not display settings, set to anything other than immediately:
1. You power on the phone, you need enter the unlock pattern.
2. You hit power button or let the display time out, the phone screen goes off.
3a. If you wake up the phone within the timeout period you set above, you should be at a normal swipe screen without the need to enter your unlock pattern.
3b. If you wake up the phone after the timeout period, you should see a pattern unlock screen and you need to enter the unlock pattern to unlock your phone.
The bug is in 3a, it showed the pattern unlock screen instead of the normal swipe screen. That's what confuseed a lot ppl. There is no security risk here. It works as it is designed to do but Samsung made a mistake to display a wrong screen.
This timeout feature is designed to be a convience feature so that you don't have to pattern unlock your phone frequently if you're actively using it. You will only be asked for pattern unlock if the phone idles for certain amount of time you set. If you don't like this and like to be asked to unlock everytime, you should set the time out to immediately anyway.
foxbat121 said:
Here is how is suppose to work (when you have the timeout in Lock settings, not display settings, set to anything other than immediately:
1. You power on the phone, you need enter the unlock pattern.
2. You hit power button or let the display time out, the phone screen goes off.
3a. If you wake up the phone within the timeout period you set above, you should be at a normal swipe screen without the need to enter your unlock pattern.
3b. If you wake up the phone after the timeout period, you should see a pattern unlock screen and you need to enter the unlock pattern to unlock your phone.
The bug is in 3a, it showed the pattern unlock screen instead of the normal swipe screen. That's what confuseed a lot ppl. There is no security risk here. It works as it is designed to do but Samsung made a mistake to display a wrong screen.
This timeout feature is designed to be a convience feature so that you don't have to pattern unlock your phone frequently if you're actively using it. You will only be asked for pattern unlock if the phone idles for certain amount of time you set. If you don't like this and like to be asked to unlock everytime, you should set the time out to immediately anyway.
Click to expand...
Click to collapse
Have you actually gave this try. I completely understand how the time out period works and I guess we all do, but your not getting where the bugs are in plural because there's two I found.
Bug 1. No matter what's your time out, it's not supposed to let you in the phone without you actually putting the password. If you let the screen sleep in the lock screen next time you wake the phone there's no password to put in. It let's you in
Bug 2. If you set time out to immediately. The Password protection lockscreen disabled right after you unlock your phone.
Sent from my SAMSUNG-SGH-I777 using xda premium
Dxtra said:
Bug 1. No matter what's your time out, it's not supposed to let you in the phone without you actually putting the password. If you let the screen sleep in the lock screen next time you wake the phone there's no password to put in. It let's you in
Click to expand...
Click to collapse
That's the whole reason why you have a timeout setting in lock screen. If you wake up the phone within timeout (timeout of the lock screen, not timeout of the display), you don't have to unlock it. If you don't like this, set to immediately.
I don't use pattern lock (which is ridiculously easy to crack). I have exchange policy on my phone with PIN password. It does not suffer from any bugs like pattern lock.
Don't understand what your mean in bug #2.
foxbat121 said:
That's the whole reason why you have a timeout setting in lock screen. If you wake up the phone within timeout (timeout of the lock screen, not timeout of the display), you don't have to unlock it. If you don't like this, set to immediately.
I don't use pattern lock (which is ridiculously easy to crack). I have exchange policy on my phone with PIN password. It does not suffer from any bugs like pattern lock.
Don't understand what your mean in bug #2.
Click to expand...
Click to collapse
Dude, it's buggy period. Before you even go any further. Give the lock screen a try. It's all around the Internet.
http://www.youtube.com/watch?v=Jvbjr4tf_Nk&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I777 using xda premium
I see, you're the one that refuse to listen/read.
foxbat121 said:
I see, you're the one that refuse to listen/read.
Click to expand...
Click to collapse
I like the feature; same as on Honeycomb.
Hi guys,
I realized that the lockscreen is doing nothing in the sense of the security on the S2. I am using a lock pattern and sometimes when I get a text call, or press the sleep/wake button a couple times, I can unlock the screen without the pattern. Anyone else notice this?
I read about this a while ago, some bug with TouchWiz 4.0
security *FLAW* found...
Bascotie said:
Hi guys,
I realized that the lockscreen is doing nothing in the sense of the security on the S2. I am using a lock pattern and sometimes when I get a text call, or press the sleep/wake button a couple times, I can unlock the screen without the pattern. Anyone else notice this?
Click to expand...
Click to collapse
Yup, I noticed this also... on my 2nd day... I was *informed* that if I truly wanted to SECURE the phone 100% with PIN/PASSWORD/Pattern, I would have to choose LOCK immediately, otherwise, every other swipe the phone can be unlocked without it... EXACTLY like you experienced it.
Just change it to IMMEDIATE and you should be fine...
lonewolf69 said:
Yup, I noticed this also... on my 2nd day... I was *informed* that if I truly wanted to SECURE the phone 100% with PIN/PASSWORD/Pattern, I would have to choose LOCK immediately, otherwise, every other swipe the phone can be unlocked without it... EXACTLY like you experienced it.
Just change it to IMMEDIATE and you should be fine...
Click to expand...
Click to collapse
You want to set the Lock Timeout to Immediately (to clarify things) Located in Settings->Location and Security->Timeout
Help! In trying to get my swipe lock screen to self-actvate when the screen turns off, I've managed to make the problem worse.
I made it PIN lock, intending to return to Swipe after testing. Now there are NO options for locking except PIN and no obvious way to clear it. I've read all kinds of suggestions, none of which worked. Surely this is not a "feature"?
Edit: Oh, duh. I can't believe this isn't documented somewhere. So you just go to the settings menu under Lock Screen and it says PIN. You touch that and it asks you to confirm your PIN. When you do you are presented with all the options again (including Swipe). Whew! Now if only the #%@#$ thing would engage when the screen turns off like it should!
The simple user experience of unlocking the device on is so bad on Pixel 6. There's just no winning option.
Smart Lock randomly kicks in, so I can't be sure that a single tap of the screen will turn on the phone.
The fingerprint sensor sucks, and requires a tap on the screen just to bring it up. And sometimes I don't even get the option to use my fingerprint.
I don't even like the single-tap gesture to begin with. It means I'm accidentally turning my screen on all the time just when carrying the phone. It almost started a call with my deadbeat father, who I haven't talked to in 20 years
I could go with no screen lock but then I'm locked out of several key features (like viewing my account passwords). Also, pressing the Power button at all on a phone this big is cumbersome, since I then have to reposition my entire hand to go from pressing it to then interacting with the screen.
I'm already rooted because I absolutely needed the Back button to be on the right side. Now I'm hoping modders can fix the unlocking experience because it's the next big issue in my mind.
The fingerprint scanner is actually very good if you set it up right, and will always be displayed with always on display... No tap required. Problem solved
turbosrrgood said:
The fingerprint scanner is actually very good if you set it up right, and will always be displayed with always on display... No tap required. Problem solved
Click to expand...
Click to collapse
Or lift to check turned on rather than AOD.
turbosrrgood said:
...and will always be displayed with always on display... No tap required. Problem solved
Click to expand...
Click to collapse
This is not my experience at all. Sometimes I get a fingerprint sensor icon. Other times my phone is unlocked via Smart Lock and I get an Unlock icon in place of the fingerprint sensor. Other times I get a Lock icon indicating Smart Lock is expired. Other times I get no icon there at all.
If the fingerprint sensor is there and I'm on the dimmed screen, sometimes it'll just light up and deny, and other times it won't even acknowledge that I've put my finger on the sensor.
If the Unlock icon is there, it requires a tap to unlock (no holding!). So that means I have to actually look at the screen and discern which icon is there to know whether I need to tap or hold.
And Lift to Check Phone would be even more problematic for me, since I'm trying to avoid accidental screen interactions and this would only cause more.
On all my other Pixel phones I just touch the back fingerprint sensor and the phone is on. I don't have to think about a dozen different possible states the phone could be in every time I want to turn it on.
Have you tried to recalibrate it via the Pixel tool thing Google has?
Google Pixel - Update and Software Repair
gavingt said:
The simple user experience of unlocking the device on is so bad on Pixel 6. There's just no winning option.
Smart Lock randomly kicks in, so I can't be sure that a single tap of the screen will turn on the phone.
The fingerprint sensor sucks, and requires a tap on the screen just to bring it up. And sometimes I don't even get the option to use my fingerprint.
I don't even like the single-tap gesture to begin with. It means I'm accidentally turning my screen on all the time just when carrying the phone. It almost started a call with my deadbeat father, who I haven't talked to in 20 years
I could go with no screen lock but then I'm locked out of several key features (like viewing my account passwords). Also, pressing the Power button at all on a phone this big is cumbersome, since I then have to reposition my entire hand to go from pressing it to then interacting with the screen.
I'm already rooted because I absolutely needed the Back button to be on the right side. Now I'm hoping modders can fix the unlocking experience because it's the next big issue in my mind.
Click to expand...
Click to collapse
It sounds like smartlock working as intended (which I find useless, and poor security). It will give you an unlock icon instead of the fingerprint. Maybe you simply don't want smart unlock, which is more useful for password only. This seems like more of a matter of figuring out what features you want to use.
If you changed the Animation Scale in Developer Settings then the AOD fingerprint icon can disappear.
turbosrrgood said:
It sounds like smartlock working as intended (which I find useless, and poor security). It will give you an unlock icon instead of the fingerprint. Maybe you simply don't want smart unlock, which is more useful for password only. This seems like more of a matter of figuring out what features you want to use.
Click to expand...
Click to collapse
I never used to use Smart Lock, but on this phone it means I don't have to deal with the inconsistent fingerprint sensor as often.
gavingt said:
I never used to use Smart Lock, but on this phone it means I don't have to deal with the inconsistent fingerprint sensor as often.
Click to expand...
Click to collapse
Try setting up the fingerprint scanner again, slightly moving your finger with ever press during set up to get every angle and view of the print. It's been pretty much perfect for me. I suppose Google could have helped instruct people to do that better in the process.
turbosrrgood said:
It sounds like smartlock working as intended (which I find useless, and poor security). It will give you an unlock icon instead of the fingerprint. Maybe you simply don't want smart unlock, which is more useful for password only. This seems like more of a matter of figuring out what features you want to use.
Click to expand...
Click to collapse
I just restarted my phone, and then repeatedly unlocked and locked it (sometimes by fingerprint, sometimes by tapping). By the end of the video, the fingerprint sensor icon disappeared completely and wouldn't come back until after another restart:
Streamable Video
Watch this video on Streamable.
streamable.com
This is just one example of the inconsistencies. I haven't changed the animation settings either.
I did see it happen a couple of times in your stream. I don't recall seeing that on mine, but I haven't been looking for it. The only other thing I can suggest is make sure you have the latest updates and/or factory reset.
Edit - I tried to replicate your stream, and the sensor showed in all 30 attempts for me. For whatever it's worth, so might be something specific to your device, maybe settings or software issue
turbosrrgood said:
I did see it happen a couple of times in your stream. I don't recall seeing that on mine, but I haven't been looking for it. The only other thing I can suggest is make sure you have the latest updates and/or factory reset.
Edit - I tried to replicate your stream, and the sensor showed in all 30 attempts for me. For whatever it's worth, so might be something specific to your device, maybe settings or software issue
Click to expand...
Click to collapse
It could be a bug related to my specific settings:
Rooted device, still on the October update
Lock after screen timeout: 30 minutes
Power button locks instantly: Off
gavingt said:
I just restarted my phone, and then repeatedly unlocked and locked it (sometimes by fingerprint, sometimes by tapping). By the end of the video, the fingerprint sensor icon disappeared completely and wouldn't come back until after another restart:
Streamable Video
Watch this video on Streamable.
streamable.com
This is just one example of the inconsistencies. I haven't changed the animation settings either.
Click to expand...
Click to collapse
what are you going on about lol. this is the kind of nonsense that is so irritating. you had 100% success rate unlocking your phone. what's the problem. looks to me like it works. so what's the big deal. and then you have the gall to complain that the sensor icon disappeared after you repeatedly locked and unlocked your phone? yea. try starting your car repeatedly. see what happens with the engine.
kramer987 said:
what are you going on about lol. this is the kind of nonsense that is so irritating. you had 100% success rate unlocking your phone. what's the problem. looks to me like it works. so what's the big deal. and then you have the gall to complain that the sensor icon disappeared after you repeatedly locked and unlocked your phone? yea. try starting your car repeatedly. see what happens with the engine.
Click to expand...
Click to collapse
Sure, ignore my multiple posts on the subject. It's not nonsense. I have no idea why you're trying to minimize this, and why you feel the need to be so combative.
gavingt said:
I'm already rooted because I absolutely needed the Back button to be on the right side.
Click to expand...
Click to collapse
You know gesture navigation is a thing now right? Back buttons are so "last decade".
sic0048 said:
You know gesture navigation is a thing now right? Back buttons are so "last decade".
Click to expand...
Click to collapse
Yes, I know and I hate it. It's extra motion that tires out my hand and I often trigger the gestures when I don't mean to.
gavingt said:
Sure, ignore my multiple posts on the subject. It's not nonsense. I have no idea why you're trying to minimize this, and why you feel the need to be so combative.
Click to expand...
Click to collapse
i will just apologize and go on with my day. good luck with the phone.
I went ahead and updated to the November firmware, and wiped my data as well. Now my phone won't show the fingerprint sensor while unlocking under any circumstances. I also found an interesting bug wherein I'm still able to turn my screen on by tapping it repeatedly even with "Tap to check phone" disabled:
screen-20211102-164842[1]
Watch "screen-20211102-164842[1]" on Streamable.
streamable.com
EDIT: And, of course, as I was typing this the fingerprint sensor just magically came back. And it still doesn't work unless I tap the dimmed screen to wake it first. Watch as it straight up ignores my finger the first time:
screen-20211102-171057[1]
Watch "screen-20211102-171057[1]" on Streamable.
streamable.com
I can recreate this 100% of the time by just setting my phone down for a second and picking it back up, then trying to unlock it. And you can't see it in the video, but the sensor doesn't even light up the first time I touch it. This is clearly a software bug.
gavingt said:
I went ahead and updated to the November firmware, and wiped my data as well. Now my phone won't show the fingerprint sensor while unlocking under any circumstances. I also found an interesting bug wherein I'm still able to turn my screen on by tapping it repeatedly even with "Tap to check phone" disabled:
screen-20211102-164842[1]
Watch "screen-20211102-164842[1]" on Streamable.
streamable.com
EDIT: And, of course, as I was typing this the fingerprint sensor just magically came back. And it still doesn't work unless I tap the dimmed screen to wake it first. Watch as it straight up ignores my finger the first time:
screen-20211102-171057[1]
Watch "screen-20211102-171057[1]" on Streamable.
streamable.com
I can recreate this 100% of the time by just setting my phone down for a second and picking it back up, then trying to unlock it.
Click to expand...
Click to collapse
but at least we know you like dunkin donuts, dominos pizza, and your mom forgets stuff
kramer987 said:
try starting your car repeatedly. see what happens with the engine.
Click to expand...
Click to collapse
Guess you don't know anything about cars. You can start and stop a fuel injected car until the battery dies, and nothing will happen to the engine or fuel system. (Yes, the battery will die if you keep starting the car and tuning it off right away) Just as proof of this, most modern cars shut off the engine when you come to a stop, and restart when you let off the brake. If you're in stop and go traffic, the engine will shut off and turn on repeatedly in a short amount of time nd distance.
Now with classic cars and motorcycles, you my flood the carb with repeated starts. Not a big deal, and not any kind of damage.
The only "damage" in repeatedly starting a car would be normal wear and tear on the starter. They do have a finite lifespan. But again, not damage, just use.