Hey guys, I wanted to place as a reply to a thread in the developers forum but didn't have the priviledges yet to post.
I just updated my RAZR to the leaked ICS OTA. As you know the bootloader is now not working with RSD lite. I didn't know this when I updated.
The rom is very poor on my phone and I wanted to downgrade, so when I tried to flash the original rom it gave me a fastboot failure. Now when I swith the phone on it always goes to the fastboot screen and says fastboot failure. nearly a week now. To get it to switch on I must old the volume buttons down, press the power button twice and select normal boot.
I didn't place the eternity patch for the bootloader in with my rom when installed it to give me the ability to downgrade the OS after upgrading to ICS.
Is there anyway to flash the original rom if you didn't place the eternity fastboot patch into the rom when you upgraded?
Thanks.
As long as you can get into Fastboot mode, you should be able to use kholk's Fla**** tool to downgrade.
Sent from my XT910 using xda premium
Thanks for replying.
That's the thread I initialy wanted to post this question to.
I've read that thread and from what I can gather it must be placed into the rom package after it's been uncompressed but before it was flashed.
The reason why I say that is because I have no idea how to access the rom package after it's been installed.
How do I access the rom to place the files in to it?
Thanks.
Try the method I used to clear the "Flash Failure" error message and boots normally, without reflashing whole ROM.
I posted the method here
http://forum.xda-developers.com/showpost.php?p=22020043&postcount=12E
Sent from my XT910 using XDA App
Cheers for the link.
I tried it but it didn't work. It temporarily cleared the failure but upon reboot it goes straight to the fastboot screen and shows fastboot failure.
I'm not really worried about the fastboot at the minute. The ICS ota is killing my phone. I really need to downgrade but have no idea how to do it using kholks instructions, they're very vague.
From what i can tell his patch should be placed into the uncompressed rom and then flashed to the phone via rsd lite to enemble future flashing after update. Is this true?
If not, how do i place his patch into my rom?
Thanks.
Sent from my XT910 using XDA App
Ah, what you need to do is extract a stock ROM (A full ROM from the stock ROMs thread, not an OTA zip) exactly the same way as you would if you were using RSD Lite. Then extract the Fla**** files into the same directory, put your phone into fastboot mode, and run the Fla**** batch file. It does the rest for you. Best of luck - and yeah, that ICS OTA is really unstable. Great taste of what's to come, mind you.
Sent from my XT910 using xda premium
Working perfectly now. Thanks for the help.
What i did initially was have RSD lite uncompress the rom and i placed kholks patch in the uncomprossed folder on my desktop and tried to execute it from there.
This time i simply just used winrar to uncompress it, copied over kholks patch and it worked great.
Wonder way it didnt run from the folder RSD lite uncompressed?
Sent from my XT910 using XDA App
Related
Hey guys,
I need some help with this CWM. It is my first time using this phone.
Ok, I will go through all the things I have down so far.
I got the phone yesterday from AT&T (America) and immediately updated OTA to official firmware 4.5.91.
I then downloaded pudding for AT&T/android 2.3.4, downloaded the latest windows 7 drivers, and the latest RSD lite 5.3.1.
I used RSD to flash pudding onto the phone, but did not enable USB debugging, or the other option to allow non-android/certified installations (located at setting, applications...I think)
That resulted in a no OS found, error 1x000 on the phone, and an error in RSD. RSD said something around the likes of: error - could not switch...something the phone then gave me a list of options and went into fastboot protocol mode.
I thought to myself: "darn, I bricked my phone", but I saw that it went into fastboot mode. I did the fastboot cmd's from my computer to unlock the phone, which seemed successful (unlock on the top left corner), but after I did fastboot reboot, the phone was stuck in the dual core screen, with unlock on top left still.
I had to pull out the battery, but the phone then booted up normally.
Thinking that everything is now fine, and still forgetting to enable those setting in the phone, I booted the phone in fastboot protocol mode and installed ROMracers CWM.
However, I didn't use the second command to delete CWM before installing romracers. It installed fine though, from what I saw.
So I then try to go into the CWM by holding the power button and volume down, then scrolling down to recovery and hitting volume up.
Then the android guy and the triangle warning sign shows up. Great.
What did I do wrong? Everything seems to have worked so far. I am using the latest versions of everything.
I am following a tutorial video on youtube (two weeks old), and I am at work right now so I have not gotten to the part where he gets the same error on his demonstration phone; however, i saw that the guy downloaded a file explorer that can do a specific thing that other programs cannot, but it costs money. I didn't see any more.
What should I do?
Download and install a root file manager, and delete recovery-sh from /system/etc, then try again
Sent from my MB860 using XDA App
If you tap the bottom right corner of the screen you will get stock android recovery options.
If you flash the cwm of your choice and immediately boot into recovery after you flash it you should be able to get into ur custom recovery until you fully try to reboot again. I think..... its been a while since I was in that boat.
You soft bricked it, that happens if you unlock the bl after 2.3.4 is on the phone. Its common
Sent from my MB860 using XDA App
Thanks guys.
What program should I use to delete that file? Preferably a free one...why doesn't everyone else have to get an app to successfully install CWM?????
Also can I just install this even though my phone is already unlocked with pudding on it?
http://forum.xda-developers.com/showthread.php?t=1138204
eurosport360 said:
Thanks guys.
What program should I use to delete that file? Preferably a free one...why doesn't everyone else have to get an app to successfully install CWM?????
Also can I just install this even though my phone is already unlocked with pudding on it?
http://forum.xda-developers.com/showthread.php?t=1138204
Click to expand...
Click to collapse
You can use es file explorer and use the root option in the preferences,
Sent from my MB860 using XDA App
I went through the same thing you did up until the ROM choice. Even the pulling of the battery. So I would say that is normal and you should not think the problem is there.
My Atrix came with the 2.3.4 update already installed and I did the pudding bit with RDS (which didn't give me root, I had to use the adb method). I flashed the Ninja Speed ROM (very happy with it) and I didn't have any problems.
Did you check with known issues of your ROM? Some require specific recovery apps.
Sent from my MB860 (Hera) using XDA Premium App
Javi97100 said:
You can use es file explorer and use the root option in the preferences,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I downloaded the app, but the root feature only works on rooted ROMS/firmwares.
Seeing that I can not put any ROM's on my phone because CWM doesn't work, I am stuck...
Does this help at all...
http://forum.xda-developers.com/show....php?t=1138204
dragon_76 said:
I went through the same thing you did up until the ROM choice. Even the pulling of the battery. So I would say that is normal and you should not think the problem is there.
My Atrix came with the 2.3.4 update already installed and I did the pudding bit with RDS (which didn't give me root, I had to use the adb method). I flashed the Ninja Speed ROM (very happy with it) and I didn't have any problems.
Did you check with known issues of your ROM? Some require specific recovery apps.
Sent from my MB860 (Hera) using XDA Premium App
Click to expand...
Click to collapse
Do you mean my CWM choice?
Most of the guides say that you should install CWM before installing ROMs.
They also say that the Rom's themselves root the device.
I do not know what to do...
Someone help me out
bump bump bump
Did you successfully root your device? If you did just download a terminal app and delete it through the command line. If you don't know how to do that we can help.
Sent from my MB860 using XDA Premium App
Here's a link to help understand CWM: http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1214513&v=1&libid=1313371129935&out=http%3A%2F%2Fwww.addictivetips.com%2Fmobile%2Fwhat-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide%2F&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D995&title=CM7%20PreBeta%232%20-%20xda-developers&txt=http%3A%2F%2Fwww.addictivetips.com%2Fmobile%2F...omplete-guide%2F&jsonp=vglnk_jsonp_13133710923571
As far as your recovery...sounds like you do not have the latest tenfar recovery or romracer recovery.
Tenfars : http://forum.xda-developers.com/attachment.php?attachmentid=641508&d=1309404399
Link to Romracers thread: http://forum.xda-developers.com/showthread.php?t=1204500
Use RomRacers CWM.... much better... install via fastboot
Sent from my MB860 using XDA Premium App
Sorry I saw you didn't root it. Do you have the Motorola RSD lite program for your computer? I would go into the firmware super thread and use RSD lite to get your phone back to square 1.
I used plain old CWM and I am more than happy sticking with mainstream recovery options.
Sent from my MB860 using XDA Premium App
dragon_76 said:
Sorry I saw you didn't root it. Do you have the Motorola RSD lite program for your computer? I would go into the firmware super thread and use RSD lite to get your phone back to square 1.
I used plain old CWM and I am more than happy sticking with mainstream recovery options.
Click to expand...
Click to collapse
Do not use rsd to go back to square one!!!!
Your atrix has the retail ota on it, you WILL HARDBRICK if you flash using rsd. All you can do on 2.3.4 with rsd is flash pudding. Ifyour unlocked already, delete rsd!
Sent from my MB860 using XDA Premium App
Sent from my MB860 using XDA App
eurosport360 said:
bump bump bump
Click to expand...
Click to collapse
This should help you get back to romracer's recovery.
1) Download romracer's recovery for your AT&T phone from his recovery thread in the development section. Make sure you download the fastboot version, not the .zip version.
2) Connect your phone to your computer, and put it into fastboot
3) Open up a command prompt on your windows computer, and issue the following commmand:
fastboot erase recovery
moto-fastboot flash recovery recovery.img***
***you should replace recovery.img with whatever the recovery file you downloaded is called
4) Then boot into recovery and it should be the recovery that you chose in the first step. Hope this helps. If it does, make sure to thank joeavery2, as it is part of his complete wipe guide!
MY RAZR IS IN STATE OF SOFT BRICK, WHEN WILL ISSUED AN ORIGINAL ROM file-base SBF TO FLASH WITH RSD LITE? PLEASE HELP ME!
Have you tried hard reset it?
yes but doesn't work, i wait a sbf file to flash with rsd lite!
I do not believe they make sbf's anymore they switched to fxz's with the bionic but either way you may be waiting a while
Yea if I were you go exchange it
Sent from my DROID RAZR using xda premium
OP, how'd you do it?
Sent from my DROID RAZR using xda premium
I accidently uninstalled Blur, now the text message app, contacts, and pretty well everything don't work. Anyway to get it back
P.S. I figured since we are on the topic of soft brick, why waste a thread.
Hmm and this is why Verizon is so strict on returns/exchanges now. People messing up their own phones and stating its a manufacterer defect. Not to sound rude or anything, but perhaps a little research was in order first? That or atleast wait for a sbf if you're going to be delete happy.
A word to all that rooted
Adb pull /system before playing with it
Sent from my XT910 using XDA App
Can I fastboot system.img on locked bootloader phone?
Sent from my XT910 using XDA App
polaris441 said:
Can I fastboot system.img on locked bootloader phone?
Sent from my XT910 using XDA App
Click to expand...
Click to collapse
I would advice against it. I played with fastboot flash and although it said flash fail, the next time I turned on my phone, I would go straight into the fastboot menu with a Fastboot (Fail Flash). If anyone do encounter this error, there is a easy fix (at least for me), just hold vol up+vol down when turning on, and select Normal boot. Done.
If you've got a system.img with the right files and signatures, you'll be able to recovery your system in most cases.
kholk said:
If you've got a system.img with the right files and signatures, you'll be able to recovery your system in most cases.
Click to expand...
Click to collapse
Any instruction on how? i have all of the IMG files because i have a back up
why not have someone share a dump with you?
Im having a similar issue i was replacing some stock apps with adb by pushing them and rebooted when i was done. Now im stuck in a bootloop and i cant connect the phone to adb with the usb no matter how hard i try.
thars sys dump
Thars a sys dump in razr form that should Fix it. Ps i want sbf or a stock flash
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
For the stock apps gust facter rest aka flash data it reinstalls them only stock ones and superuser
have you try flashing your phone using fastboot files like explained in developers section..?
system dump
Not sure if I have what you need but I have the Motorola Droid Razr Xt910 Rogers. I did an ADB bull of the system folder and zipped it. If you need that I'll upload to Megaupload or something.
If you need an .img file you'll have to give me instructions on how to do it. I've been having trouble trying to get the partitions pull such as modem, system, kernal, etc.
FrAsErTaG said:
A word to all that rooted
Adb pull /system before playing with it
Sent from my XT910 using XDA App
Click to expand...
Click to collapse
Should we do the Adb or softbrick it? I saw that there is a softbrick recovery on another thread
Ok so I'm currently running the latest ICS CleanROM but would like to restore back to my GN nandroid I made. I'm just confused on what steps I need to do. I guess the ICS ROMs use different kernels that are not compatible with GB. In which case I don't know where to get the latest OTA stock kernel from so I can restore back to GB. Been searching and trying to read but it gets confusing. Any help would be greatly appreciated. Thanks guys.
Sent from my HTC Rezound using XDA App
TeamSPD said:
Ok so I'm currently running the latest ICS CleanROM but would like to restore back to my GN nandroid I made. I'm just confused on what steps I need to do. I guess the ICS ROMs use different kernels that are not compatible with GB. In which case I don't know where to get the latest OTA stock kernel from so I can restore back to GB. Been searching and trying to read but it gets confusing. Any help would be greatly appreciated. Thanks guys.
Sent from my HTC Rezound using XDA App
Click to expand...
Click to collapse
There is a posted latest OTA stock on android developement , but I think it got pushed back to the 2nd page by now.
He has 2 files , one is a zip and the other a ph98img file.
Now, the text file in the ph98img file is our old stock number so it won't auto install.
Here is what I did, put the first file on the root of the external SD card.
Open up the second file and remove the boot.img file, and put on your desktop or better yet into your fastboot folder that you used to unlock with.
Now, reboot in recovery and wipe data/factory reset. Then install your backup, but don't reboot yet. Flash the 1 st file you downloaded from the OTA kernel post. After that is done , return to main recovery menu.
Now select developer menu, then select reboot to bootloader. After you are in bootloader select fastboot (should say FastbootUSB ) if your phone is plugged in and your in fastboot.
Finally, open up a command prompt from the fastboot folder containing the boot.img from the 2nd file and type in fastboot flash boot boot.img
This will flash the rest of the stock kernel for you . Now ,, just reboot normally and you should be good to go .
Now, this is if the backup nand your restoring was using the stock OTA kernel. If not , its the same process just pull the boot.img out of the kernel from whatever rom your trying to restore.
TeamSPD said:
Ok so I'm currently running the latest ICS CleanROM but would like to restore back to my GN nandroid I made. I'm just confused on what steps I need to do. I guess the ICS ROMs use different kernels that are not compatible with GB. In which case I don't know where to get the latest OTA stock kernel from so I can restore back to GB. Been searching and trying to read but it gets confusing. Any help would be greatly appreciated. Thanks guys.
Sent from my HTC Rezound using XDA App
Click to expand...
Click to collapse
i just came back to cleanrom 1.5.5 from ics rom and this is what i did.
you need the cleanrom and cleanflash 1.0 to do this.
cleanrom: http://www.scottsroms.com/downloads.php?do=file&id=70
cleanflash: http://www.scottsroms.com/downloads.php?do=file&id=57
extract the rom file and copy the boot.img file and paste on cleanflash folder.
also put the rom file in your ext. sdcard.
now use cleanflash.exe and flash the boot.img first
then from bootloader, go to recovery and wipe then flash the rom
Awesome thanks guys this is helpful. Gonna give it a try.
Sent from my HTC Rezound using XDA App
TeamSPD said:
Awesome thanks guys this is helpful. Gonna give it a try.
Sent from my HTC Rezound using XDA App
Click to expand...
Click to collapse
I believe CleanROM 1.5+ & RezROM 1.4+ ROMs include and automatically install the kernel.
My atrix 4g will only boot to motorola logo, I have an unlocked bootloader but like a fool i did a factory reset and lost root access.i have no cwm and cant find a way to get it without root access and even if I do I still have no recovery..how can I get root access without the usb debugging set and not being able to boot into phone.I have no os..i cant seem to flash anything without root so im stuck and really have no other option but to figure this out with someones help.
did you try this
sephk said:
did you try this
Click to expand...
Click to collapse
yes says cannot load..pretty much im stuck because i was on 2.3.6 and messed up something in framework and it made my phone not capable of booting pass the motorola logo. i was rooted before all this but when my phone got stuck i did a factory reset before i knew it would take my phone back to having no root and also from what i read it resets the phone so usb debugging is not checked.also ive gotten the 0x1000 error no os detected too..basicall i have no os on my phone and cant root without the usb setting and cant get to that without booting up phone..ive tried pretty much everything but without root i cant seem to flash anything at all.my bootloader is unlocked.i can get to factory ndroid and recover but have nothing to recover.i think my only option is finding a way to get cwm on phone without root or being able to boot.not sure.. sorry bout the long sob story but ive tried so many things from the forum
Boot into fastboot and flash romracer's Atrix recovery. Put a ROM on an SD card and install it through the recovery.
Sent from my MB860 using xda app-developers app
tasteslikechicken said:
Boot into fastboot and flash romracer's Atrix recovery. Put a ROM on an SD card and install it through the recovery.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ha previously i looked everywhere for a link to that zip that worked and now i find one then download and after trying the last thing from 2nd post now when i go into recovery it says magic value mismatch and i cant even get in to try. this is a neverending circle here and im 4 days deep in looking at the computer screen trying to find a working answer. what do i do about this mismatch issue now?
you can solve this easily
go and get the 2.3.4 sbf with unlocked bootloader
rsd it
and your atrix will live again
Sent from my MB860 using xda premium
maggedo said:
you can solve this easily
go and get the 2.3.4 sbf with unlocked bootloader
rsd it
and your atrix will live again
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
i can not find a single link to that that still works.. everythings dead like my phone.. you know of one still up or any other sbf i can try?
i will try to post to you
your problem i have met before
Sent from my MB860 using xda premium
I would try the automatic bootloader unlock tool. It has a tool in the utility for "failed to boot / no os". I had the same problem as you and this worked great. It was very easy to do. http://forum.xda-developers.com/showthread.php?t=1182871&highlight=automatic
http://paulyhoffman.com/public/
OR
http://narod.ru/disk/45363482001.6e01bed58d95e4422fd2c015bebd9dca/ATT-2.3.4_Pudding_preroot.rar.html
download this file named "ATT-2.3.4_Pudding_preroot.rar"
the use RSD to flash this sbf into your Atix
After then, you can boot with stock recovery
Try to wipe factory reset and wipe cache
Then you could boot into 2.3.4 which already unlock bootloader and root.
Good luck!
download this file named "ATT-2.3.4_Pudding_preroot.rar"
the use RSD to flash this sbf into your Atix
After then, you can boot with stock recovery
Try to wipe factory reset and wipe cache
Then you could boot into 2.3.4 which already unlock bootloader and root.
Good luck![/QUOTE]
Maggedo my buddy you my sir...are a master of your craft. now that im fixed up I see that the fix was right in front of me the entire time it was just a matter of finding good links and a decompressor to extract the .sbf from the .rar..popped it in rsd ran it and bang im no longer the owner of a couple hundred dollar pocketmirror/weight..still ironing out a few details and gotta get my root access back and try to recover some of what i lost.you saved me though. i have no warranty,couldnt do insurance swap and im pretty poor haha so i had no other options.saved my life man!!! if i could hit thanks more than once id sit here and do it all day.thank you very much.
I was stuck on the Moto Dual Core Screen as well. I used the automatic unlock MAIN program to unlock, root and install custom recovery. When I tried to flash epinter's CM10 ROM I got boot hang at the Moto screen.
You can RSD back to stock (e.g. I found the AT&T .151 sbf file and restored my phone to working condition on 2.3.6 GB).
In the end I figured out that the recovery in the auto unlock tool (both the telfar and CWM options) was borking the CM10 flash. I ended up:
1. RSD lite AT&T .151 GB 2.3.6 sbf file
2. Unlock Bootloader with automatic unlock
3. Root and install custom recovery
4. Boot into android
5. download goo.manager from play store
6. Install open source recovery with goo.manager
7. reboot into recovery
8. Make backup of everything
9. Flash JB CM10 & GApps
Phone is up and running w/o issues. A bit of googling should find you the necessary sbf to get you on your feet again.
Good luck!
Rooted and unlocked moto electrify.
i have been flashing roms on several phones for many years. i always rely on the devs here at xda to help me through and you guys never fail!!!
my electrify is unlocked and rooted, been running th3bills cm10 for several weeks, also tried miui aokp and others. all great roms and great work!!
i was changing my keyboard on my phone and ran into trebuchet stopped working and couldnt get it to do anything. i tried reflashing the rom without wiping hoping it would fix it but it did. i did a reset and wipe and reload of the rom and it still stopped working. i then decided to, while in recovery, partition the sd card mount just cause i like to learn and i do that by trying thing, anyway, when i did it hung up for like 5 mins. thought it was kinda long so i pulled the battery. At this point im not sure of all the steps i took to get cm10 on my phone but it took a lot. after i put the battery back in and started the phone the screen comes on, says unlocked up in the corner but no red dual core symbol, instead it has this on the screen.......................................
unlocked
PwrReason: SW_AP_RESET
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
----------------------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
Fastboot
.......................Not sure whats up and if there is any affects on the rom
If any devs or members have any info or want to try to fix this or can fix if it does cause problems please reply to the post. ill take any info available.
thanx to all the devs for all their hard work! i think i speak for everybody when i say how much your work is appreciated!!!
[email protected]
pm me on the xda app as well. rhewins2268
electrify rooted unlocked and running th3bills cm10
Its not erased. Your boot logo is erased and possibly your PDS partition is lost too. Just means you can't activate PR update your prl normally anymore.
Sent from my MB855 using xda premium
---------- Post added at 04:17 AM ---------- Previous post was at 04:15 AM ----------
To fix, restore your PDS through CWM, and also flash a boot logo through fastboot or cwm with a flashable zip.
Sent from my MB855 using xda premium
Looking into that now. In the meantime....is it going to have bad affects on my ROM. Also do you know where to get files needed to fix?
Sent from my MB855 using xda premium
No. I actually prefer it that way. Its just an issue whenever you sbf back to stock and your phone attempts to activate itself.
As far as files and such, search via Google or xda for PDS fix, it'll show either a thread for the atrix or photon.
And then search for boot logos to flash.
Sent from my MB855 using xda premium
So just to clarify.... when I sbf back to stock I will have to do what to activate?
Will I have to dial *228 or what will I run into for issues?
I have already done a lot of Google searches and found the file you spoke of last night for the atrix (does it matter?) and instruction on how to push it to my phone.
Just trying to be ahead of the game and have my info before moving forward. Phone is running great with no issues so far.
Basically picking your brain for knowledge and help before I soft brick or some sh** and have to lock my bootloader to get my phone back.
So....... thank you very much for your help and insight into this. Had never seen it before.
Sent from my MB855 using xda premium
http://forum.xda-developers.com/showthread.php?p=14888120
Follow that link and since your bootloader is unlocked, use fast boot to flash. download the PDS gingerbread zip and unzip.
Doing that will allow you to ota update in case you revert to stock.
For flashing a boot logo, follow this link and read a few posts into it to find a cwm-flashable zip to restore your boot logo: http://forum.xda-developers.com/showthread.php?t=1187337
***Don't sbf with the uscc sbf because it will lock your bootloader. ***
Sent from my MB855 using xda premium
I believe this is the question and then i'll leave you alone for a day or so lol
Do i have to be on a stock rom to do this or can i do it on th3bill's cm10 or other custom roms?
To you hoslayer13.... you have been a wealth of knowledge! I tip my hat to you sir!
To answer your question, yes you can be on a custom rom to do this but before you do check your PDS partition first. I am pretty sure there will be only a lost-found folder with nothing in it.
Sent from my MB855 using xda premium
Yes it is just an empty folder. Using file manager that comes with cm10 that comes with root access in the root directory I find a folder "PDS" and it is empty. I'm going to push the fix now and will update my results.
Sent from my MB855 using xda premium
I flashed the fix and have noticed to Ill affect on the ROM so far. Also flashed boot logo. Working great!
Thanks again hoslayer13!!
Thank you xda! Always there!
Sent from my MB855 using xda premium
Hey no problem. I'm glad I could help
Sent from my MB855 using xda premium
Needing some help again!!! Hoping you can help. dont know if you noticed but i started a new thread. reall did it this time. Fail to boot 1. only have fastboot. bootloader relocked while rsding 2.3.4 on the phone. it fail and never rebooted. hoping you can help. whem i type moto-fastboot oem unlock i get infooem not implemented or something. the bootloader has to be from 2.3.4 though cause that is what i flashed.
ANY THING AT ALL PLEASE
i can get to fastboot and flash the RDL3_unlocked.smg file and achieve temp unlock but no rsd so can go to the next step. Im trying everything i can and still nothing yet. Gonna keep trying but some help woyld really be great!! PLEASE!!