My phone is stuck in some kind of a boot loop... i can get it into download mode but cant get it into cwm. I have tried flashing lots of stuff via odin but it doesn't make any difference. Is there any way I can fix this?
weird O.O do you mean bootanimation is looping cause you can actually get into CWM before the bootanimation
nope clockwork mod has disappeared D:
After installing new ROM did u again wiped cache or data?? If so reinstalling would be better,,
I reinstalled using odin
try to reset factory settings and clear cache after installing...
TomAnkcorn said:
My phone is stuck in some kind of a boot loop... i can get it into download mode but cant get it into cwm. I have tried flashing lots of stuff via odin but it doesn't make any difference. Is there any way I can fix this?
Click to expand...
Click to collapse
By flashing via Odin with a stock rom, you'll loose CWM. You have to flash CWM again to get it back. But as you described it, you can't even get into Recovery mode (blue Samsung recovery screen with HOME+Power button combo)?
^^
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If u can't get to recovery mod then flash a new firmware from sammobile via Odin
Sent from my GT-S5830 using xda premium
I had this problem also.
I reloaded a new stock rom from sam and loaded it with odin, after the install I turned the phone on with the power button + the home button and did a factory reset and wipe catch.
And that worked.
u need to hold the power button + home button till you get in the menu.
I came from cm7.1 and went to stock rom 2.3.5.
Hope get it. Otherwise post your steps from which rom you came.
Sent from my GT-S5830 using XDA App
ginodp said:
u need to hold the power button + home button till you get in the menu.
Click to expand...
Click to collapse
or...
when phone is off, hold power button and home button in the same time.
when the phone is showing samsung, you can release the power button, but keep hold the home button until recovery menu showed
Related
Can I get into recovery mode without a working home button? My i9100 has a faulty home button, phone is stuck on a bootloop will not get pass the samsung logo screen. I can flash the phone in odin with a stock rom and finish with success but still get stuck on bootloop. I think if I can get into recovery to wipe data then the phone will boot all the way. Any help is appreciated. I've searched but have found nothing solid. Thanks!
Buy a usb jig off ebay. plug it in then turn your phone on and it will put it into download mode.
e.g.
http://www.ebay.com/itm/Samsung-Gal...445900?pt=PDA_Accessories&hash=item3cbb7b1e8c
tle05 said:
Can I get into recovery mode without a working home button? My i9100 has a faulty home button, phone is stuck on a bootloop will not get pass the samsung logo screen. I can flash the phone in odin with a stock rom and finish with success but still get stuck on bootloop. I think if I can get into recovery to wipe data then the phone will boot all the way. Any help is appreciated. I've searched but have found nothing solid. Thanks!
Click to expand...
Click to collapse
my home button is also broken, let me know if you find a miracle
RealityKill said:
my home button is also broken, let me know if you find a miracle
Click to expand...
Click to collapse
See above.
jayquinten510 said:
See above.
Click to expand...
Click to collapse
well i guess hes already got a jig. was wondering how he got in download mode with a broken home
I can get into download mode by pressing and holding volume down + pressing and releasing power but still holding volume down when turning the phone on. But my question is, how do I get into recovery without home button?
Flash a matching Chainfire CF root kernel via Odin (phone in DL mode). This with install his Cwm app. Once rebooted, run app (give su permission), and choose to boot into either clockwork recovery, dl mode, or reboot.
Edit: But once in recovery, how do you plan to actually select anything when the home button doesn't work? ? ?
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Flash a matching Chainfire CF root kernel via Odin (phone in DL mode). This with install his Cwm app. Once rebooted, run app (give su permission), and choose to boot into either clockwork recovery, dl mode, or reboot.
Edit: But once in recovery, how do you plan to actually select anything when the home button doesn't work? ? ?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
He cant boot up, he's stuck at boot logo so no way to use the cwm from chainfire
Oh dear without the home button it's hard to operate the phone. I think you can boot into recovery mode by using ADB, search on the forums or Google.
I would rather you have the home button replaced ot fixed.
Cheers!
Sent from my GT-I9100 using XDA App
Use can use QtADB to get into recovery - just tried, it works. But the option "flash zip" doesn't work, and of course,................
how do you plan to "select" anything if the home button doesn't work? ? ? Can't think of any way just yet.
---------- Post added at 03:11 PM ---------- Previous post was at 02:49 PM ----------
If you have adb setup, and know how to use it;
1. Copy the Custom ROM.zip to your sdcard folder on the phone
2. Rename to "update.zip"
3. Run CMD and navigate to the sdk tool folder where adb.exe is
4. Run "adb reboot recovery" to enter recovery mode
5. Phone to boots into recovery screen
6. "apply: /sdcard/update.zip"
7. After finish, reboot into new ROM
Haven't tried it myself though on the SGS2 ..............
tried it, didn't work..
Lost my Home button after odin flash HELP
I am stuck a i9100 that has no home working home button after i botched my first odin flash. I can not seem to get the device to be recognized by ADB or ODIN now that its messed up. I can boot into the Android Recovery System e3, and i can move up and down in the menu, but the 'home' button i used to select options no longer works. I can not get it to boot out of that menu.
This is a Sprint branded i9100 from the United States... tho when i got it, it was already 'rooted' with Gingerbread-Eg30 however it did not state the firmware version. So after i used ODIN to ref lash it... it rebooted and killed my home key... Now i am not sure what to do. ADB is not finding the device listed and I can't seem to get it to take a rom. Any suggestions?
Prior to flashing this rom in odin i had a working home key which was used as part of the 3 button combo to ender flashing mode or to select an option in the stock recovery menu.
Any help would be great!
Flash a full wipe rom like stock in download mode that should fix it.
shadowofdarkness said:
Flash a full wipe rom like stock in download mode that should fix it.
Click to expand...
Click to collapse
I am having the same problem. My I9100's home button doesn't work. I had cyanogenmod 10.1 and cwm recovery installed. Used the button saviour app to operate a virtual home button on screen. Updated to cyanogenmod 10.2. nightly yesterday. All seemed working. Today I found that some apps like Google Play and ROM Manager would crash on when started. So I thought I go back to cyanogenmod 10.1. Started the installation of 10.1 from the "about this phone" settings because ROM Manager crashed and I couldn't boot into recovery from the crashing ROM Manager.
So, I now flashed a stock firmware from samfirmware.com with ODIN (because I can get into download mode with the USB-Jig), but that stock rom stucks in a boot loop.
Any suggestions? I believe, I am stuck in boot loop because I couldn't wipe the phone before flashing. Is there any way to wipe it in download mode?
Or can you be more specific, how to flash a "full wipe rom" and post a link where I can download such a rom?
1. Don't use rom manager on i9100, sure way to screw things up /brick.
2. Get the hardware sorted before you muck around with software. As you have found out, it's easy to get into a situation where you need the hardware to function correctly.
3. Download JB leak (stock firmware) from samfirmware and flash it via Odin. It's a 3 part firmware, and will wipe as it flashes.
Sent from a galaxy far, far away
So I decided to go ahead and root my player. Then I found this custom rom and followed their instructions: http://forum.xda-developers.com/showthread.php?t=1517194
It keeps on bootlooping my device, and even though installed steves kernel: http://forum.xda-developers.com/showthread.php?t=1377771
(which contains CWM) I cannot boot CWM recovery from boot.
It booted up a few times in CWM recovery, but now it doesnt want to. Since then ive tryed flashing steves kernal sveral times to see if I can get it to work. It hasn't.
I really just want to get my device back to stock, I have a stock rom but it still gets stuck in a bootloop.
Help!
Can you get into download mode?
Sent from my SGH-I897 using Tapatalk 2
gmillz said:
Can you get into download mode?
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Yes I can, I just can't find anyway to get into CWM recovery.
I have a US 4.0 player just so its clear. :good:
EpikMcWin said:
Yes I can, I just can't find anyway to get into CWM recovery.
I have a US 4.0 player just so its clear. :good:
Click to expand...
Click to collapse
Also one other thing, I though i knew how to launch CWM recovery, but now im not sure if im doing it right after all. Any clue how to launch CWM recovery on the player 4.0?
EpikMcWin said:
Also one other thing, I though i knew how to launch CWM recovery, but now im not sure if im doing it right after all. Any clue how to launch CWM recovery on the player 4.0?
Click to expand...
Click to collapse
Hmmm not sure how to get into recovery on 4.0.
Sent from my SGH-I897 using Tapatalk 2
gmillz said:
Hmmm not sure how to get into recovery on 4.0.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I figued out how to get into recovery mode (power button + hold up volume). Now to figure out how to fix the bootloop....(I tried followign th instructions here but to no avail: http://forum.xda-developers.com/showthread.php?t=1660596)
FIXED
OK i managed to fix my own problem. I installed steves kernel, cleared the cash and the dalvik-cache. Then I flashed the stock rom and wiped all data(reset the factory settings) and then cleared the cashe.
Then my device booted up properly. :good:
Glad to hear you fixed it
Sent from my SGH-I897 using Tapatalk 2
EpikMcWin said:
Also one other thing, I though i knew how to launch CWM recovery, but now im not sure if im doing it right after all. Any clue how to launch CWM recovery on the player 4.0?
Click to expand...
Click to collapse
You get into Clockwork mod by turning off the device. Then Hold power, Volume up, and the settings (the one to the left of the home button) at the same time. Sometimes you have to let go when the samsung logo appears and then hold it again
obscuresword said:
You get into Clockwork mod by turning off the device. Then Hold power, Volume up, and the settings (the one to the left of the home button) at the same time. Sometimes you have to let go when the samsung logo appears and then hold it again
Click to expand...
Click to collapse
could you give more incorrect info, the CORRECT steps for entering CWM (or stock if not using a custom kernel) is to power device completely off, wait for the vibrate to indicate shutdown. Then press and hold volume up and the power button, once the samsung logo comes on release only the power button, do not release the volume up, continue holding volume up until CWM loads.
daniel644 said:
could you give more incorrect info, the CORRECT steps for entering CWM (or stock if not using a custom kernel) is to power device completely off, wait for the vibrate to indicate shutdown. Then press and hold volume up and the power button, once the samsung logo comes on release only the power button, do not release the volume up, continue holding volume up until CWM loads.
Click to expand...
Click to collapse
On my 4.0 US I don't hold the volume any longer than the power button to get into CWM--i.e., I let both go at the samsung logo, and it goes in.
daniel644 said:
could you give more incorrect info, the CORRECT steps for entering CWM (or stock if not using a custom kernel) is to power device completely off, wait for the vibrate to indicate shutdown. Then press and hold volume up and the power button, once the samsung logo comes on release only the power button, do not release the volume up, continue holding volume up until CWM loads.
Click to expand...
Click to collapse
That's how I always entered CWM or the stock one lol. It works for me. Also another way I did it was wait until the samsung logo appears and then hold power + volume up at the same time. I didn't let go of either the power button or volume up button, and just waited for it to come on.
Next time for a better result Go to a stock rom and Flash a kernel with odin. best way to Install CWM perfectly.
like Terra Silet, i have Gplayer 4 and Rooted This Kernel One Milion time
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
Don't worry..i have done worse things with my phone and yet to brick it..
Fist thing to go into recovery you hold vol up + power + home and not vol down..
Second thing what you will have to do is after the Odin flash..press and hold vol up+power+home..you will boot into the stock recovery..from here do a factory reset but mind you all the data on your internal sdcard will be lost when you do this..now reboot your phone..your phone will boot up properly now..assuming that you have flashed the firmware properly in Odin..
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
As zoot1 replied to you for download mode press vol down+home+power for a few seconds......for recovery vol up+home+power.........
And make very sure the kernel you flash is compatible with your phone and firmware!!!!!!!!!!!! The rest zoot1 explained in his reply
Good luck
Sorta Bricked
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
db1117 said:
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
Click to expand...
Click to collapse
go to download mode and flash a stock rom via odin
Cant's get to Download mode
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
db1117 said:
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
Click to expand...
Click to collapse
Well i suggest u send it with its warranty or u could check out my sig and build ur own usb jig
Sent from my GT-I9300 using xda premium
You might be able to get to download mode via a usb jig.
Hello Everyone,
I had Jelly bombed rom v 7.0 (samsung gs3 sprint). I didn't wipe out data/ factory reset , so after flashing stock rom (factory one and then updated ones). Now it stuck on samsung logo flashing a in the background. So it seems like it trying find files or something. But not booting and turning on. I tried to put in recovery mode by vol up+home+power, but it don't work. I downloaded the jelly bombed from internet but it's a zip file so can't flash it with Odin. Help me Please!!!!
Thanks,
Dev
If you have a Sprint you are in the wrong forum
If you use odin, just run the stock rom over. I presume vol down and power takes you to download mode?
Sent from my GT-I9300 using xda app-developers app
Watenaccio said:
If you use odin, just run the stock rom over. I presume vol down and power takes you to download mode?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes, Thanks for replying. But It's now working. I was keep holding vol down + home + power util about 10 seconds but it never took me to the recovery. But the actual method is hold vol down + home + power and after 2-3 seconds leave the power button n keep holding other two. So I finally got to the recovery mode, deleted caches and wiped all data. After this restarted but the same problem. Finally re flashing solved the problem and it's working now!!
here's my problem,
my phone keeps on restarting whenever i reboot it.
ive tried full wipe, wipe partition and wipe dalvik cache.
ive also tried flashing custom rom via cwm and stock rom in odin which is I9100XWLS8_I9100FOPLS3_FOP
in cwm, power button isn't working..
when trying to choose a zip file, pressing power button
isn't working but touch function works well.
in odin just flashed stock rom this morning, but when it tries to boot, same problem occurs, it keeps on restarting..
i hope someone could help me ..
What you have, is a bootloop, which occurs when you don't do a full wipe before flashing a new rom..
And maybe the cwm you use doesn't support the clicking of the power button..
hezokulet said:
here's my problem,
my phone keeps on restarting whenever i reboot it.
ive tried full wipe, wipe partition and wipe dalvik cache.
ive also tried flashing custom rom via cwm and stock rom in odin which is I9100XWLS8_I9100FOPLS3_FOP
in cwm, power button isn't working..
when trying to choose a zip file, pressing power button
isn't working but touch function works well.
in odin just flashed stock rom this morning, but when it tries to boot, same problem occurs, it keeps on restarting..
i hope someone could help me ..
Click to expand...
Click to collapse
Maybe POWER button is faulty.Try to flash DorimanX Kernel.
i have manage to boot my phone,
turn on phone, while booting, i have to hard press the upper button of powermenu.
when it booted, i try to lock my phone (screen off) using powermenu and it wont work. powermenu option didnt showed up too..
but when i tried to screen off using the icon in dropdown toggle, it works fine.
yesterday after work i went to a technician, he said nothings wrong with it, and the only problem is the program.
but i already flashed it in stock rom and custom roms, i did full wiping to flash a clean rom.
this morning, i was thinking that the problem was the efs folder, but when i look into the efs folder in root system there it was.
i hope someone will help me..
When in recovery try the menu button.
Sent from my GT-I9100 using xda app-developers app
in recovery all keys are working except for the powerbutton .
And what happens when you select an action and press home?
Siyah v6 works that way.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
And what happens when you select an action and press home?
Siyah v6 works that way.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
pressing home button works fine too.. the only problem is the power button key, ive tried a keytest and it dont really work.
Does it work as normal. If you push power will it turn screen of and on? You could use twrp as It dont use buttons edit: I read power button dont work at all?? Go to a better tec.
Also that efs bit is lock screen not power button. If it was gone it would still turn screen on and off and work just no lock screen:thumbup:
andrewwright said:
Does it work as normal. If you push power will it turn screen of and on? You could use twrp as It dont use buttons edit: I read power button dont work at all?? Go to a better tec.
Also that efs bit is lock screen not power button. If it was gone it would still turn screen on and off and work just no lock screen:thumbup:
Click to expand...
Click to collapse
when phone is on .. power button is totally not working .. but when it is off i had to hard press it until booting is finished .
thats what im thinking, going to a better techy might solve my problem .
Dose it turn the phone on and off? Does it work at any time on or off? I don't get what hard press is?
andrewwright said:
Dose it turn the phone on and off? Does it work at any time on or off? I don't get what hard press is?
Click to expand...
Click to collapse
i mean long press / hold pressing the power bitton until its finished from booting ..
andrewwright said:
Dose it turn the phone on and off? Does it work at any time on or off? I don't get what hard press is?
Click to expand...
Click to collapse
i mean long press / hold pressing the power button until its finished from booting ..