Related
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe
So I just cant get my EVO 3D downgraded........I followed the thread which says I can do it with xvi32 but I am on mwakious ROM and I cant find those numbers no way what I do.
HBOOT 1.53.007 is really a pain
So I would ask If you guys could help me......no I am not a noob but I need directions how to solve it.
Any Help is appreciated. thanks
Are you s-off? If not, then that's your first step.
coal686 said:
Are you s-off? If not, then that's your first step.
Click to expand...
Click to collapse
No my phone is S-ON.
gesange said:
So I just cant get my EVO 3D downgraded........I followed the thread which says I can do it with xvi32 but I am on mwakious ROM and I cant find those numbers no way what I do.
HBOOT 1.53.007 is really a pain
So I would ask If you guys could help me......no I am not a noob but I need directions how to solve it.
Any Help is appreciated. thanks
Click to expand...
Click to collapse
I am assuming you are trying to gain s-off correct? If that's the case perhaps I can offer you a different solution. With this solution you won't have to downgrade your hboot. Here's a link to this guide. http://forum.xda-developers.com/showthread.php?t=1743466
Now before you attempt it you must have the prerequisites met:
Unlocked via HTC Dev method
On stock ROM
Have superuser root
A PC windows or Linux
Insulated wire (speaker wire, or a paperclip wrapped with electrical tape is good enough)
Make sure HTC sync and or iTunes are uninstalled so they won't interfere
You will follow method D on the guide for those who are on 1.53
Follow the directions step by step. Make sure you download the appropriate control bear based on what os, phone, and computer you are using.
Make sure you know what contact areas you need to touch. This is the wire trick BTW.
When you have everything set up run the exe file and when it prompts you. Touch both contacts at the same time.
It might take a few tries but it should work.
Jsparta26 said:
I am assuming you are trying to gain s-off correct? If that's the case perhaps I can offer you a different solution. With this solution you won't have to downgrade your hboot. Here's a link to this guide. http://forum.xda-developers.com/showthread.php?t=1743466
Now before you attempt it you must have the prerequisites met:
Unlocked via HTC Dev method
On stock ROM
Have superuser root
A PC windows or Linux
Insulated wire (speaker wire, or a paperclip wrapped with electrical tape is good enough)
Make sure HTC sync and or iTunes are uninstalled so they won't interfere
You will follow method D on the guide for those who are on 1.53
Follow the directions step by step. Make sure you download the appropriate control bear based on what os, phone, and computer you are using.
Make sure you know what contact areas you need to touch. This is the wire trick BTW.
When you have everything set up run the exe file and when it prompts you. Touch both contacts at the same time.
It might take a few tries but it should work.
Click to expand...
Click to collapse
Yes I am tryin to gain S-OFF on my EVO 3D.
Unlocked via HTC Dev method: unlocked
On stock ROM: I would need a RUU correct? I downloaded one but the image version was lower than mine ( mine image version: 3.28.401.1 )
Have superuser root: i have
A PC windows or Linux : windows 7
Insulated wire (speaker wire, or a paperclip wrapped with electrical tape is good enough): sorii my englisch aint that good a picture would help
Make sure HTC sync and or iTunes are uninstalled so they won't interfere: never had HTC sync or Itunes
No you don't need a ruu if your already on stock. Your all good to go. There should be a picture of where to touch the contacts and a video if I'm not mistaken in unlimited.io's page where you find the evo 3d.
Jsparta26 said:
No you don't need a ruu if your already on stock. Your all good to go. There should be a picture of where to touch the contacts and a video if I'm not mistaken in unlimited.io's page where you find the evo 3d.
Click to expand...
Click to collapse
No I am not on stock.......I am on mwakious ICS ROM thats the point.
Ahaaa ok will check it out and btw the link for controlbear is dead.....removed I mean :S
gesange said:
No I am not on stock.......I am on mwakious ICS ROM thats the point.
Ahaaa ok will check it out and btw the link for controlbear is dead.....removed I mean :S
Click to expand...
Click to collapse
OK grab that ruu you were talking about and let's find out if we can get another link. I'll try pm the devs behind juopunut bear and see if they can post a link.
Edit: my mistake, you were referring about media fire. That's OK we can get the file from their website (hopefully) brb
Jsparta26 said:
OK grab that ruu you were talking about and let's find out if we can get another link. I'll try pm the devs behind juopunut bear and see if they can post a link.
Click to expand...
Click to collapse
Okay I got it on the site unlimited.IO
So I got the image version but cant determine which of the RUUs on our site is the correct one....because a lower one wont do nothing
Ok I found the link. http://unlimited.io/jb_shooteru.htm hopefully this will be it.
Edit: OK you got the control bear file. Are you branded? If so which carrier, if not just use the European ruu.
Here's how to downgrade your hboot for gsm after you s-off successfully http://forum.xda-developers.com/showthread.php?p=32032629
(Don't ask me for help as I couldn't care if your phone explodes, eh!
Jsparta26 said:
Ok I found the link. http://unlimited.io/jb_shooteru.htm hopefully this will be it.
Edit: OK you got the control bear file. Are you branded? If so which carrier, if not just use the European ruu.
Click to expand...
Click to collapse
No I am not branded so I will grab just an RUU European version
gesange said:
No I am not branded so I will grab just an RUU European version
Click to expand...
Click to collapse
OK once you get the file. Remember to relock your boot loader first before flashing your ruu.
1. Power down you phone and put it in fast boot
2. Make sure USB debugging is enabled
3. Hook your phone up to your PC
4. Run cmd and type fastboot oem lock.
5. If the file is an exe you can run it on your PC after relocking.
6. If not place it on root of sdcard and rename it too PG86IMG in all caps
7. Boot into boot loader and let your phone pick up the update
8. Start and let the update finish
9. Unlock bootloader again
10. Flash recovery
11. Flash super user
Presto!! Now your ready to run wire trick. Good luck.
Jsparta26 said:
OK once you get the file. Remember to relock your boot loader first before flashing your ruu.
1. Power down you phone and put it in fast boot
2. Make sure USB debugging is enabled
3. Hook your phone up to your PC
4. Run cmd and type fastboot oem lock.
5. If the file is an exe you can run it on your PC after relocking.
6. If not place it on root of sdcard and rename it too PG86IMG in all caps
7. Boot into boot loader and let your phone pick up the update
8. Start and let the update finish
9. Unlock bootloader again
10. Flash recovery
11. Flash super user
Presto!! Now your ready to run wire trick. Good luck.
Click to expand...
Click to collapse
Okay this will take up to 1h cause my internet is slow and informate the others that I found this latest RUU Europe version because I see many folks are looking for it ) I posted in the wrong section but I think mods can move it to general...little mistake )
Okay I will get back when download is done and the whole process you described too )
gesange said:
Okay this will take up to 1h cause my internet is slow and informate the others that I found this latest RUU Europe version because I see many folks are looking for it ) I posted in the wrong section but I think mods can move it to general...little mistake )
Okay I will get back when download is done and the whole process you described too )
Click to expand...
Click to collapse
I will create a mirror on dev-host and add it to your thread when it's ready since that should be faster and not have the advertising and such that hotfile uses. I have a CDMA model myself but I know a lot of people have the European version of the GSM model.
Edit: NVM. There are already good mirrors here and here.
ramjet73
Jsparta26 thanks for all your afford I have done it after 20 failed attempts my EVO 3D is S-OFF )
So whats the next what I should do now?
EDIT: I tooked the downgrade to 1.49.0007 HBOOT and now I should unlock it again via HTC DEV correct?
gesange said:
Jsparta26 thanks for all your afford I have done it after 20 failed attempts my EVO 3D is S-OFF )
So whats the next what I should do now?
EDIT: I tooked the downgrade to 1.49.0007 HBOOT and now I should unlock it again via HTC DEV correct?
Click to expand...
Click to collapse
Nope. Its not necessary anymore. You've been set free kinda like the matrix lol. You can upgrade and downgrade your hboot with no hassles. Flash any gsm evo 3d rom you want. With the exception of cool sense you can be whatever hboot you want and on any sense or aosp ROM you want. Just remember to be on 1.49 to flash aosp roms.
Please don't forget to abuse my thank you button. I'm glad you got s-off. Happy flashing sir.
Edit: viper 3d is the only ROM I know that can be on any hboot. However I am not sure about the other ROMs. I'm CDMA so have no clue about gsm roms. I would make sure to know what hboots are compatible with whatever ROM your interested in before flashing. Sorry about yje confusion.
You should be ok to flash any rom in the gsm threads without any issues with hboot 1.49, I'm gsm with hboot 1.49, unlocked through revolutionary and s-off, I have yet to find a rom that will not boot ics 3.6,ics 4,ics 4.1, and jb
(Don't ask me for help as I couldn't care if your phone explodes, eh!
Hey gang -
Working with my EVO 3D (Virgin Mobile) - and I'm stuck in a world of S-ON. The pre-requisites state that for the S-OFF Wire trick to work you must be on Windows 7 or less and be using specific version of HTC drivers. I'm running Windows 8, the specific version of HTC drivers recommended (HTC Driver 3.0.0.007) will not work in Windows 8. Needless to say I've not been able to get the wire trick to work and I'm "still sober". I've had very little success trying roms that will work and be happy with an S-ON phone. Until I decide to downgrade a machine back to Windows 7... what roms should I look for that I'll actually be able to use without bootlooping? So far the Midnight rom worked but is incredibly battery hungry (10 minutes of facebooking drops the battery 20-25%) - and today I installed MeanRom which seems to be doing better in the battery department.
Just looking for friendly advice... I've kinda given up on the wire trick for now.
Midnight1970 said:
Hey gang -
Working with my EVO 3D (Virgin Mobile) - and I'm stuck in a world of S-ON. The pre-requisites state that for the S-OFF Wire trick to work you must be on Windows 7 or less and be using specific version of HTC drivers. I'm running Windows 8, the specific version of HTC drivers recommended (HTC Driver 3.0.0.007) will not work in Windows 8. Needless to say I've not been able to get the wire trick to work and I'm "still sober". I've had very little success trying roms that will work and be happy with an S-ON phone. Until I decide to downgrade a machine back to Windows 7... what roms should I look for that I'll actually be able to use without bootlooping? So far the Midnight rom worked but is incredibly battery hungry (10 minutes of facebooking drops the battery 20-25%) - and today I installed MeanRom which seems to be doing better in the battery department.
Just looking for friendly advice... I've kinda given up on the wire trick for now.
Click to expand...
Click to collapse
CyanogenMod 10.1 - WILD FOR THE NIGHT Works like a dream! http://forum.xda-developers.com/showthread.php?t=2098121&nocache=1 Also compatible with Virgin (It says you need S-Off but I have S-On on my Evo 3D, just need to use Flash Image GUI)
jsls said:
CyanogenMod 10.1 - WILD FOR THE NIGHT Works like a dream! http://forum.xda-developers.com/showthread.php?t=2098121&nocache=1 Also compatible with Virgin (It says you need S-Off but I have S-On on my Evo 3D, just need to use Flash Image GUI)
Click to expand...
Click to collapse
Are you on the Sprint 1.5 hboot?
WFTN is not going to boot with the stock 1.57 VM hboot.
ramjet73
Yes, sadly I'm on 1.57 hboot. This has been quite the thorn in my side.
Only one i know is Harmonia from andriodforums evo v 4g sections.
Not sure if you can run Wild for the night, but its my rom of choice but im s-off.
Looking at Harmonia now - thanks for the suggestion - I'm running MeanRom since last night.
MeanRom's battery performance is better than the last one I was using, MidnightRom.
Being stuck in the world of S-ON sucks... I want so much to try the AOKP/AOSP roms.... ugh!
Midnight1970 said:
Looking at Harmonia now - thanks for the suggestion - I'm running MeanRom since last night.
MeanRom's battery performance is better than the last one I was using, MidnightRom.
Being stuck in the world of S-ON sucks... I want so much to try the AOKP/AOSP roms.... ugh!
Click to expand...
Click to collapse
The requirements for the JuopuntBear wire trick have been changed to Ubuntu Linux and they no longer support Windows at all. There's a live CD linked from the unlimited.io website that can be booted without having to actually install Linux so you might want to give that a try.
I have a guide here for root/S-OFF that might work with Windows 8 if you use this guide to install the drivers.
ramjet73
Thanks ramjet - I'm looking at that info now. It sure is a lot to consume.
Most guides all say "click this post" for reference, that has a link within to click another post, which links to another post... lol, gets to where I've got 10 tabs open in no time... not complaining at all, just a bit time consuming to ensure all the info has been digested...
I'm having fits!
I followed the guide... got the RUU installed and configured.... unlocked the bootloader (again)... flashed the SU.... now when I try to run ControlBear it won't complete, saying it can't transfer the backups - looking at the JuopunutBear website it says that error is due to a custom rom or htc sync installed.... I don't have htc sync and the rom is the RUU.... I'm really confused now...
Midnight1970 said:
I'm having fits!
I followed the guide... got the RUU installed and configured.... unlocked the bootloader (again)... flashed the SU.... now when I try to run ControlBear it won't complete, saying it can't transfer the backups - looking at the JuopunutBear website it says that error is due to a custom rom or htc sync installed.... I don't have htc sync and the rom is the RUU.... I'm really confused now...
Click to expand...
Click to collapse
If you are using my guide, restart controlbear.exe and check the screen for superuser access prompts that need to approved. That's usually why the secondary backup fails.
ramjet73
Well I'll be........
Guess it would help if I actually looked at the screen, huh?
Well... I'm happy to report that after following your guide, ramjet, that I'm officially S-OFF!!! (after only the 2nd try) - I'm a happy man tonight!! Thank you sir...
I'm also refreshed that I was able to ask my questions and receive the answers and help I needed without a "xda smackdown" that tends to follow such newbie questions. For this I'm grateful.
Installed my first AOKP rom, TeamDIRT_DirtyUnicorns_V1.2, and its bootlooping after the install... never made it to the setup screen.
Ugh....
Have you installed another hboot? 1.50 and below to boot aosp based ROMs. Either do the PG86IMG.zip method, or my new favorite, search XDA for fastboot commander. I had to use it for my gfs evo v 4g because I couldn't get the pg86img to work because of the cid. I recommend 1.50.5050 jbear or 1.04 eng.
Sent from my PG86100 using xda premium
Its on JuopunutBear hboot but its still 1.57 ... guess I need to figure out how to get to 1.50.5050.... argh.
Ready to start screaming, lol ... really thought I had it with the wire trick... double argh...
Found the thread for the PG86IMG_JBear_1.50.5050_hboot_GB -
Rename this to just PG86IMG.zip and let the bootloader flash it?
Midnight1970 said:
Found the thread for the PG86IMG_JBear_1.50.5050_hboot_GB -
Rename this to just PG86IMG.zip and let the bootloader flash it?
Click to expand...
Click to collapse
That's it.
Congratulations on getting S-OFF.
ramjet73
I think I screwed up.... after going back to the RUU - I forgot to install the OTA update while on the stock RUU... now I'm having troubles sending and receiving texts.... do I have to start over from scratch?
I was getting the Radio Interface Resource Shortage error msg - I rebooted the phone and all seems well now... hmm.
Midnight1970 said:
I think I screwed up.... after going back to the RUU - I forgot to install the OTA update while on the stock RUU... now I'm having troubles sending and receiving texts.... do I have to start over from scratch?
Click to expand...
Click to collapse
No problem.
Since you are S-OFF now you can just flash the firmware only updates from both the VM OTA's (November and March). The November update is in this post and the March update is in this post. Just flash them in sequence from the bootloader.
ramjet73
If I use fastboot commands to push those updates, can I rename them or do they have to remain named PG86IMG.zip?
Hello,
I was recently given a bootlooping Evo 4G Lte. I have been trying to figure out how to get this thing out of a bootloop and havent been able to do it. I, unfortunately, have no history on what happened to this device. Currently, it bootloops on the "Mean Bean" loading screen but will go no further. I can get into the bootloader, which says it is Unlocked, S-On, but I am unable to boot it into a recovery, it just returns back to bootloader. I have tried fastbooting twrp, but it fails (remote: image update error), and I have tried fastbooting the Mean Bean kernel thinking maybe thats all it needs, but that failed as well. Anybody have an insight? Much appreciated! Thanks.
Mike
I would run the 3.17 RUU. Hit the top link in my sig and look at the last post in the thread. You can run it from the bootloader. You'll need to re-root afterwards but it should get your phone back in working condition.
Sent from my HTC EVO 4G LTE
FinZ28 said:
I would run the 3.17 RUU. Hit the top link in my sig and look at the last post in the thread. You can run it from the bootloader. You'll need to re-root afterwards but it should get your phone back in working condition.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Thanks for the quick reply. I downloaded the RUU and ran it. However it sits and says "Waiting for bootloader" then errors out with "USB connection issue". The usb is working. The reason I never ran the RUU in teh first place was because i thought i read that you cant RUU with and unlocked bootloader. Is that not true? or is that my problem?
Mike
Not 100% sure but I will check with someone who used this tool recently and see if they were still unlocked at the time. Were you connected via Fastboot USB? Sounds more like a driver issue.
Sent from my HTC EVO 4G LTE
FinZ28 said:
Shouldn't matter. I know of a couple of users who were having phone issues and had unlocked bootloaders when they ran this tool. Were you connected via Fastboot USB? Sounds more like a driver issue.
Click to expand...
Click to collapse
Yeah I was connected and it said fastboot USB. It said rebooting to bootloader and rebooted, still said fastboot USB. Then it sat at a screen that said "waiting for bootloader" and after a while error ed out.
You can try relocking. You just need to run the command "fastboot oem relock" from a command line while connected via fastboot USB mode.
Sent from my HTC EVO 4G LTE
FinZ28 said:
You can try relocking. You just need to run the command "fastboot oem relock" from a command line while connected via fastboot USB mode.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
I have since tried relocking to see if that was it, and it did the same thing.
Mike
Hopefully @YoFayce can shed some light on the matter since he recently used this on his phone.
Sent from my HTC EVO 4G LTE
FinZ28 said:
Hopefully @YoFayce can shed some light on the matter since he recently used this on his phone.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
crazymike1234 said:
I have since tried relocking to see if that was it, and it did the same thing.
Mike
Click to expand...
Click to collapse
you can use the stock RUU and you can leave the bootloader unlocked as it will not affect anything.. it will fix your looping problem (Amongst others) as in gps not working ect.. once your done you will need to fastboot over your TWRP and from there mod as normal Good Luck! and ill be watching if you need any help!
YoFayce said:
you can use the stock RUU and you can leave the bootloader unlocked as it will not affect anything.. it will fix your looping problem (Amongst others) as in gps not working ect.. once your done you will need to fastboot over your TWRP and from there mod as normal Good Luck! and ill be watching if you need any help!
Click to expand...
Click to collapse
Problem is the ruu keeps error in out. I am beginning to think it may still be a driver problem. Someday I will get this done!
Mike
crazymike1234 said:
Problem is the ruu keeps error in out. I am beginning to think it may still be a driver problem. Someday I will get this done!
Mike
Click to expand...
Click to collapse
When in doubt update your android SDK remove the htc drivers reboot install drivers reboot and you should be good to go! Check the integrity of your USB cable and if possible use a rear USB port (More Power) Painful process yes but well worth it.. HTC drivers act strange till you reboot OOOh and make sure your using the proper HTC drivers for windows 32 bit or 64 bit!
YoFayce said:
When in doubt update your android SDK remove the htc drivers reboot install drivers reboot and you should be good to go! Check the integrity of your USB cable and if possible use a rear USB port (More Power) Painful process yes but well worth it.. HTC drivers act strange till you reboot OOOh and make sure your using the proper HTC drivers for windows 32 bit or 64 bit!
Click to expand...
Click to collapse
The drivers seem to be ok, but I am still not able to get any further. The RUU finds my phone, then reboots again to bootloader, but it just sits there saying "Waiting for bootloader" until it errors out due to "USB Connection error". I have tried a few different cables, and different USB ports. Not sure what the problem is but it just wont go any further. I re-unlocked my bootloader with htcdev. I have tried fastbooting a recovery to the phone but it errors out. I just cant get anything to work so I can boot anything. I really just want to get something working...anything! Any other ideas? Thanks.
Mike
use an sd card put a recovery image on the root of the sd boot into bootloader apply the recovery you should then have a recovery if you did it right, go into twrp mount device add a rom flash in recovery viola.
Sinistertensai said:
use an sd card put a recovery image on the root of the sd boot into bootloader apply the recovery you should then have a recovery if you did it right, go into twrp mount device add a rom flash in recovery viola.
Click to expand...
Click to collapse
Sinister,
Thanks for the reply. I put TWRP on the sdcard (named PJ75IMG, right?) and tried to apply that when I rebooted to recovery last night and it failed. It tries to load it but gives a few errors quick (No Image) Did I do it wrong?
Mike
crazymike1234 said:
Sinister,
Thanks for the reply. I put TWRP on the sdcard (named PJ75IMG, right?) and tried to apply that when I rebooted to recovery last night and it failed. It tries to load it but gives a few errors quick (No Image) Did I do it wrong?
Mike
Click to expand...
Click to collapse
make sure the file is just the PJ75IMG no additional text and it should be .zip If I recall correctly. make sure its on the root of the sdcard not internal but sd or external and it should be at the top level e.g. sdcard/ make sure its not in any other folders after you do that hold power and vol down get to hboot screen itll scan and then just follow the instructions.
Sinistertensai said:
make sure the file is just the PJ75IMG no additional text and it should be .zip If I recall correctly. make sure its on the root of the sdcard not internal but sd or external and it should be at the top level e.g. sdcard/ make sure its not in any other folders after you do that hold power and vol down get to hboot screen itll scan and then just follow the instructions.
Click to expand...
Click to collapse
Thats exactly what I did. It is the only thing on the sdcard. It says no gift file, Loading, no image for 4 different things. Then returns to the bootloader.
Mike
crazymike1234 said:
Thats exactly what I did. It is the only thing on the sdcard. It says no gift file, Loading, no image for 4 different things. Then returns to the bootloader.
Mike
Click to expand...
Click to collapse
zip files probably corrupt then. download another do the same process make sure you've got a good file use md5 checks
Sinistertensai said:
zip files probably corrupt then. download another do the same process make sure you've got a good file use md5 checks
Click to expand...
Click to collapse
Hmmm, Ill try download again. I got it from the main TWRP site.
crazymike1234 said:
Hmmm, Ill try download again. I got it from the main TWRP site.
Click to expand...
Click to collapse
careful on the vol down press you might be holding it too long and its canceling the update.
Sinistertensai said:
careful on the vol down press you might be holding it too long and its canceling the update.
Click to expand...
Click to collapse
Well, which recovery file should I be using? When I use the main TWRP ones (ie openrecovery-twrp-2.6.0.0-jewel.img) it gives me the errors like I said above. I now see they have a few labeled like this PJ75IMG-twrp-2.3.1.0-jewel.zip. When I use these, it tries to continue but says "Main Version Is Older. FAILED"
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help