Related
Hi there, i was trying to run Debian on my pro, but i cant install it! i try two methods, the Linux installer Beta 1.7 (say kernel dosnt have ext and loop support) and the SU terminal emulator way (cant chmod to 4755 any file, even using the su command - from here: http://www.talkandroid.com/android-forums/android-development/1091-install-debian-android.html )...
My pro is ROOTED with latest z4root, i even do a factory repair with pc companion...
Any advice???
Regards!
I tried this as well... no loop is no loop ( required for chroot type runs )
works on a Samsung i5700 I have at work tho...
thnx for the reply, so i can add loop and the ext thing? or we need a custom kernel? , what rom have the samsung?, in other hand i dont know why i cant chmod the files, even using root explorer! regards...
needs a new kernel yes.
i5700 is running samdroid cooked ( forget which version, but added multitouch )
damn :/
now why i cant chmod the files using su terminal emulator or root explorer? maybe is because my sdcard is formated in fat32, regards!
fat32 knows nothing about *nix style permissions, in a way though... all files on a fat32 are set 0777, but not really... heh
For what it's worth, I've just had Debian running in a chroot on my X10 Mini Pro, using the instructions at talkandroid.com, as mentioned by the original poster. Sorry, but as a new poster, I'm not allowed to link directly to those directions. This is with stock ROM, upgraded to Android 2.1, rooted with SuperOneClick.
A few modifications are necessary to make it work. I'm going to try to describe what I've done, but I am working backwards, so it's entirely possible that I'll leave something out and you could suffer disastrous consequences. So please be sure you back up all crucial data before proceeding, and be prepared to accept the possibility that your phone could be destroyed in the process.
First of all, the instructions tell you to run scripts from your SD card, which isn't going to work unless the card has a partition with a Linux-compatible file system. I suggest following the directions as far as step 4. Then replace the "bootdeb" file in the "debian" directory with the modified version attached to this post. Rename it "bootdeb". Then you will have to run the following commands manually, preferably using adb shell, but it can be done in a terminal on the phone. Either way, using the ash shell helps by providing command completion and history.
As root (su):
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock0 /system
mkdir /data/local/mnt
cd /sdcard/debian
cp bootdeb /data/local/bin #note: you may need to mkdir /data/local/bin first
cd /data/local/bin/
chmod 4777 bootdeb
You should now be able to run the bootdeb script to start up Debian.
The installation file says, "Be sure to run /scripts/onetime.sh as root from the shell after your FIRST 'boot'." This will prompt you to set a root password.
At this point, the Debian installation is command line only and root only. The image file needs to be resized before much can be added.
The other files in the Debian directory may be useful, but they all need to be modified before they can be used.
This is only a beginning. I don't know that I'm likely to get very far with it, so anyone else who's inclined to jump in and make this work better is welcome to do so!
edit: correcting grammatical error
Just in case anyone else shares my obsession -- I mean interest in getting Debian to run on an X10 Mini Pro, I thought I should report my progress. Or lack thereof.
Actually, as I said in the previous post, command line Debian works, and that's a lot of power to have available. But it would be nice to get X working, despite the lack of video drivers.
There's a lot of information out there about setting up X with a VNC server on an Android phone, then running a VNC client to access the graphic environment. The source of most accounts seems to be a thread at the androidfanatic forums, with the title "Gnome, KDE, IceWM or LXDE Desktop on your Android!"
(Sorry, I'm still too new at this to be allowed to post links, so this is the only way I can indicate where to find the information.)
I've tried lots of variations on those directions, trying to adapt them to the X10 Mini Pro. And I've had a little success. I can get to the Icewm or LXDE desktop and run the terminal program, but I can't start any programs that use X. Invariably, I get this error:
Error: Can't open display: :1.0
I've run out of ideas, so I'm taking a break from the project. If anyone else is interested enough to try, good luck to you!
For what it's worth, the most recent and comprehensive account of running Debian with X on Android phones appears to be at lanrat.com, in the "android" directory, filename "debian".
@RobbH
Very interesting! I'm waiting a new 8gb card so that I try it! Should you come up with any new progress please report here
Okay guys, so here's a weird one.
My g-tablet was working great. Was running VEGAn-Tab Build, BETA 5.1.1, no reason to update it, because it did everything I needed. I finally had it to where I wanted it, then it all kind of started falling apart. Here's how.
I power it on and notice my home screen got all messed up for some reason (using launcher pro). All of the settings defaulted to the original. I tweaked it back to more or less how I wanted it, and when I had it back to normal, thought nothing better of it. Must have glitched out some how.
Then I notice a bunch of things starting to force close, specfically android market, amazon market, titanium backup, google services framework, launcher pro, etc. Odd thing is it would do it one at a time, but otherwise my tablet would carry on as normal.
I go ahead and restart the tablet, to see if that helps at all, and what do you know, the homescreen is messed up again! I thought launcher pro might have been the culprit, so I un-installed the app and rebooted... And launcher pro is still there.
I go ahead and delete it again and start deleting other apps, restarting the tablet, and no matter what I do, everything stays the same. time for some clockwork mod action. I go into clockwork mod, and try to do the factory reset option, thinking what the hey, I'll try anything right now. Hit it, mourn the loss of my user data, and reboot the system... and again, everything is still the same.
I hook up my tablet to the computer via usb, and it looks like I'm able to at least delete misc. files that way. But when I return to good old Tabatha (my nickname for Gtab) everything is stuck just the way it is.
Needless to say, it feels like I'm stuck in the twilight zone.
I know I should have researched it by now, but I'm going to finally look it up to see if I can recover with NVFlash (I know I know, very noobish of me, using strange roms and not knowing any of the basics).... but I'm increasingly worried I've got some kind of a hardware malfunction on my hands. Could it be the memory? The internal SD card?
Oddly enough, my tablet still functions... I can browse the web, hook it up to my computer, etc etc, but no matter what I do I can't alter the data I already have on my tablet. Can't delete things, can't change settings, update apps, etc. etc. Which makes it pretty much useless for what I wanted to use it for.
I finally realized what this is like. The movie groundhog day, and I'm stuck in the same day, over and over again.
Any help or input that might get me out of this mess would be greatly appreciated.
Phil: "I was in the Virgin Islands once. I met a girl. We ate lobster, drank piña coladas. At sunset, we made love like sea otters. *That* was a pretty good day. Why couldn't I get *that* day over, and over, and over..."
This is now the second time that I've seen this exact same problem. I was in the process of troubleshooting the original one when the user returned his gTablet for replacement. If you can stand the deja vu, read this thread.
Do not nvflash your tablet--nvflash cannot fix SD-card related problems. Read this post for why not.
Instead, do this for me: Reboot the gTablet, then open a Terminal, or, use adb and run this command:
Code:
$ dmesg > /mnt/sdcard/dmesg.txt
Attach that dmesg.txt which will contain messages from the kernel to your next post.
I'll check this thread in the evening.
rajeevvp said:
This is now the second time that I've seen this exact same problem. I was in the process of troubleshooting the original one when the user returned his gTablet for replacement. If you can stand the deja vu, read this thread.
Do not nvflash your tablet--nvflash cannot fix SD-card related problems. Read this post for why not.
Instead, do this for me: Reboot the gTablet, then open a Terminal, or, use adb and run this command:
Code:
$ dmesg > /mnt/sdcard/dmesg.txt
Attach that dmesg.txt which will contain messages from the kernel to your next post.
I'll check this thread in the evening.
Click to expand...
Click to collapse
Thanks for the direction, at least I know it isn't an isolated incident. It's 1:45 AM where I am right now, and I have to wake up for work in about 5 hours... So I probably won't be able to get in depth with the follow up on this stuff untill after work tomorrow night (so long as the wife doesn't hog the computer )
Again thanks for the quick response, I appreciate you pointing me into some sort of direction. Can't wait to try to get this sorted out!
Currently trying to figure out how to get ADB going.... pretty intimidating, but I'm trying. I got the Java JDK installed, installing the SDK, but can't find the "SDK Setup.exe" file or even a USB driver folder in the SDK directory. Got a good resource for getting ADB set up?
Save yourself some trouble. Got to http://www.knoppix.org/ and download the latest Knoppix live CD image.
Burn it, boot it, then use the adb executable from this post. For simple things like just running adb, you don't need the entire Android SDK.
Get me a dmesg while inside ClockworkMod:
Code:
$ [B]sudo ./adb shell dmesg > dmesg.txt[/B]
ADB commands documentation
Thanks, I'll try it out sometime this weekend!
Well, I really screwed myself now. I got the Linux distro loaded but still couldn't figure out how to get ADB to work. For whatever reason, When I boot from the DVD, I can't download the zip from within linux (get errors) and I could not open the ADB command by navigating to where I have it extracted in my hard drive. [Do I need to load the OS onto a flash drive instead?]
So I started messing with some stuff in clockwork mod. I apparently really goofed it, and I got a "Magic Value Mismatch" error everytime I tried to boot it up.
I looked up Magic Value Mismatch, and from there it pointed to using NVFlash to try to fix that problem. So tried that. After I flashed it, I thought for sure I finally had it back to stock, as the intro screen started to show the tap n tap logo... but i basically got stuck in a boot loop, tap n tap, then "n", then tap n tap, then "n", etc, until it dies.
I looked up this issue and apparently the key is to get into clockwork mod and do factory reset, reset cache, and partition the SD card to 2048 and 0, which I did... (per post #4 on this thread: http://www.slatedroid.com/topic/17501-helpstuck-in-bootloop/ ) but still no dice.
Not sure where to go from here, or if I can even get it to interface with ADB in its current state. Looks like I'm done for
Thanks for trying though
On second thought, I may have had a breakthrough, at least in getting ADB to see my tablet!!! Woohoo! It finally sees the device and has a serial number. Was following the device on this thread:
http://www.androidtablets.net/forum/viewsonic-gtablet-technical/5377-adb-g-tab-step-step.html
7. under the "[Google.NTx86]" section, paste the following:
Code:
;NVIDIA Tegra
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
%CompositeAdbInterface% = USB_Install, USB\VID_0955&PID_7100&MI_01
save the file and exit.
But I have a 64 bit machine, so I finally figured it out and plopped that into the 64 bit portion of the .inf file. DOH!
So now let me see what I can drum up through the previous commands above.... though the parameters have changed now to be sure... Due to my haste things may have taken a turn for the worse.
To recap, now my tablet is stuck in a boot loop after having done NV Flash, after having screwed up some settings in clockwork mod trying to fix a "Magic Value Mismatch" error.
Tried:
$ dmesg > /mnt/sdcard/dmesg.txt
I just run this in the cmd prompt at my platform-tools directory where the adb is correct?
All it says is, "The system cannot find the path specified."
Am I doing something wrong, or is my tablet that messed up?
Okay, this is slightly weird. So I was browsing around in clockwork mod, and lo and behold, the original zip flies for vegan tab are all STILL THERE. So I reloaded them... And My tablet zips back to exactly the way I had it before!
Only this time, so far no force closes. This looks way too good to be true after what I've been through. I'm going to try modifying some files and settings and restart my tablet to see what it does. I'm pretty sure I can't be out of the woods yet. Allthough it is 3:33 AM as this is happening... magic hour. I may be going insane.
EDIT: Nope, was definitely way too good to be true. All my data is as stuck as it was ever was. But at least now I can get into it again. But now we're back to square one. Lemme figure out this dmesg business and get back to you. X(
So I would try issuing the following exactly in the command line at the adb platform tools folder:
$ dmesg > /mnt/sdcard/dmesg.txt
Is that code supposed to be copy and paste in? I don't seem to be getting anything. I can do the following command and get the info to pop into the command interface:
adb shell dmesg
But I can't figure out how to save that to a text file. And you want me to do that while the g tablet is in recovery, correct?
FYI, trying to do it through Windows 7. Would that command only operate in the linux environment via knoppix?
Thanks
titobetlogs said:
I can do the following command and get the info to pop into the command interface:
adb shell dmesg
But I can't figure out how to save that to a text file.
Click to expand...
Click to collapse
Redirect the output to a file:
Code:
C:\SOME\PATH> [B]adb shell dmesg > dmesg.txt[/B]
titobetlogs said:
I got the Linux distro loaded but still couldn't figure out how to get ADB to work. For whatever reason, When I boot from the DVD, I can't download the zip from within linux (get errors) and I could not open the ADB command by navigating to where I have it extracted in my hard drive.
Click to expand...
Click to collapse
I suggested using Knoppix just because it is so easy to use adb in Linux. Broken-down steps for future reference:
1. Download and burn the latest Knoppix Live CD iso image. Check the downloaded file size. The .iso file should be ~700MB in size. Also, test the CD by booting it and then typing at the boot prompt: knoppix testcd
2. Boot Live CD and skip the creation of any partition or file to store user data. After all, we just want to run adb.
3. After Knoppix has booted into the desktop, run a browser, right click on the adb.zip attachment in this post, then select "Save Link As..." and save the zip file into /tmp.
4. Connect the gTablet to the PC via the USB cable.
5. Open a terminal window, then type in it:
Code:
hostpc$ [B]cd /tmp[/B] [I]Change to the dir. where adb.zip was saved[/I]
hostpc$ [B]unzip adb.zip[/B] [I]Unzip zip file[/I]
hostpc$ [B]ls -l adb[/B] [I]Check if the adb program was extracted OK[/I]
-rwx------ 1 rvp rvp 159620 Dec 1 22:23 adb
hostpc$ [B]chmod 555 adb[/B] [I]Make adb executable.[/I]
hostpc$ [B]sudo ./adb shell dmesg > dmesg.txt[/B]
Note 1: do not type in the shell prompt, 'hostpc$'. It is only there to show you what the screen should (roughly) look like.
Note 2: If adb says something like "device not found", just unplug the USB cable from the PC, wait a few moments, then re-plug the cable and re-run the adb command again.
6. Go back into the browser and attach the dmesg.txt file that is there in /tmp. You will have to tell the Noscript plugin to allow scripts from xda-developers to enable attachments. Right click on the page, then select the Noscript menu item, then choose "Temporarily allow xda-developers.com".
I thought for sure I finally had it back to stock, as the intro screen started to show the tap n tap logo... but i basically got stuck in a boot loop, tap n tap, then "n", then tap n tap, then "n", etc, until it dies.
Click to expand...
Click to collapse
I'm not surprised. If the files on the internal SD card cannot be modified then that boot loop behaviour is to be expected. Here's why:
Android requires certain partitions to exist on the system. These partitions can be either on the flash or on SD cards. The partitions are:
/system: This is where the binaries and system apps that come with the firmware are stored. This partition is usually mounted read-only to protect it. On the gTablet, this partition is on the 512MB built-in NAND flash chip.
/cache: As the name indicates, this is the partition used to speed up the execution of the Java apps. Temporary files are also created here. This partition too is on the built-in NAND flash chip.
/data: This is where user-downloaded apps are stored by default, and also where Android stores its system configuration data. This partition, on the gTablet, is on the internal SD card.
/sdcard: This is where user content like media files, books, and the apps moved to SD card are stored. This partition too is on the internal SD card.
The first 3 partitions are critical and Android won't come up without them being present (or, if there are any errors on them). Among these 3, only /system needs to be correctly populated (When you install a ROM, new stuff is copied here). The other 2 partitions, /data and /cache can be empty and the system will boot up fine--with defaults. In fact, when you select "wipe data/factory reset" in CWM, /cache and /data are re-formatted--effectively, wiped clean.
(There are 2 other important partitions on the NAND flash chip, but, these are not mounted because they don't contain a proper filesystem. You have to use special tools to create the contents of these 2 partitions.
The first of these is the "boot" partition. This one and "system" are re-written when you install a new ROM. The "boot" partition holds the Android Linux kernel. If you install a new kernel, only the "boot" partition is rewritten.
The second is the "recovery" partition. This contains a separate, and usually different (and safe), Linux kernel and a mini filesystem image. This is a fail-safe partition. Stock recovery and ClockworkMod sit here.)
In your case, nothing on the internal SD card can be modified, so the stuff in /data will still be from your old ROM. (nvflash also cannot modify SD card contents, as I mentioned before.) When the stock firmware boots up, it will find incompatible stuff in /data. Critical apps will then die. Android will restart them, they will die again. This is your boot loop.
Get me the dmesg output and then we'll run a few tests using CWM, but, judging from your previous posts, I don't think your internal SD card can be fixed. You have 2 options:
1. Return the tablet for a replacement.
2. If you can't return it, I can switch the internal and external SD cards on your ROM so that you can boot and use the system (almost) normally. But, this is a custom solution and you will need to have an external SD card in its slot always. Read through this thread.
Wow, you really know you're stuff! I'll see what I can get you later on in the day with regard to the dmesg, I'm currently still at work.
I had suspected a hardware error... bummer. I'll definitely be interested in seeing if I can just use the external micro sd slot to sub out for the internal sd card. I would at least like this thing to be functional again, though I suppose I'll never be able to try any of the honeycomb roms when those get past alpha. Oh well.
Do you know if this thing takes 32 gb micro sd cards? That would be pretty awesome, I at least wouldn't feel too limited on space.
By the way, thanks for all your help on this, I know I'm a huge noob. I greatly appreciate your patience and taking the time to break everything down for me. I have absolutely zero background in programming or anything computer related, though I do find this stuff extremely fascinating! If I could rewind the clock and study this stuff in school, I would do it in a heartbeat.
Again, thanks so much, can't thank you enough.
titobetlogs said:
I would at least like this thing to be functional again, though I suppose I'll never be able to try any of the honeycomb roms when those get past alpha. Oh well.
Click to expand...
Click to collapse
No, you should be able to run whatever ROM you want. I'll send you an installable zip file, in a few days, which should get you going again on Vegan-Tab, at least. You'll just need to remember to flash this zip file right after you've flashed the ROM (of your choice).
Right now, I don't know if I need one zip file for each kind of ROM in existence for the gTablet, or, if I can use some scripting and do the internal/external SD card switch using just a single installable zip file. I'll look into this on the weekend.
Do you know if this thing takes 32 gb micro sd cards?
Click to expand...
Click to collapse
Yes, it does.
By the way, thanks for all your help on this, I know I'm a huge noob...
Click to expand...
Click to collapse
I was a complete noob to Android myself back in April of this year. I've picked all of this up in just a few months. I'm pretty sure you can do it too, with a bit of poking around in the system. Of course, having a background in Unix/Linux helps a lot.
In your honor, below are some inspiring lyrics from the Karate Kid soundtrack:
You’re the best!
Around!
Nothing’s gonna ever keep you down
You’re the Best!
Around!
Nothing’s gonna ever keep you down
You’re the Best!
Around!
Nothing’s gonna ever keep you dow-ow-ow-ho-how-ho-own
INSPIRING GUITAR SOLO
Dude! you're embarrassing me -- I haven't send you the zip file yet... and, you haven't sent that dmesg output I wanted.
I know I've been stuck at work and family functions every day this week so far. Hopefully I'll get to it soon
Finally got to this! Here you go! Thanks again!
titobetlogs said:
Finally got to this! Here you go!
Click to expand...
Click to collapse
Can't see any problems in that dmesg output. Time for some tests on the internal SD card.
Boot into CWM, then run on PC (on Linux run: sudo ./adb shell):
Code:
C:\SOME\PATH> [B]adb shell[/B]
~ # [B]mount /dev/block/mmcblk3p1 /sdcard[/B] [I] Mount internal SD card partition[/I]
~ # [B]mkdir -p /sdcard/a/b/c[/B] [I]Make a directory tree[/I]
~ # [B]echo test > /sdcard/a/b/c/test.txt[/B] [I]Create a file[/I]
~ # [B]cat /sdcard/a/b/c/test.txt[/B] [I]Read it back again[/I]
test [I]Correct[/I]
~ # [B]echo 3 > /proc/sys/vm/drop_caches[/B] Flush kernel caches
~ # [B]cat /sdcard/a/b/c/test.txt[/B] Read it back again
test Correct
~ # [B]umount /sdcard[/B] [I]Unmount[/I]
~ # [B]mount /dev/block/mmcblk3p1 /sdcard[/B] [I]Remount /sdcard[/I]
~ # [B]cat /sdcard/a/b/c/test.txt[/B] [I]Reread file[/I]
test [I]You should see "test" here[/I]
~ # [B]umount /sdcard[/B]
You should see "test" after the kernel flush and the remount.
Next, reboot the tablet--back into CWM, then run the cat command again. `cat' should output "test", again, if the SD card is OK.
Here's a screen of the commands I entered and what I got back. Did I do anything wrong? Looks like something's a bit off.
I am by no means an expert, i just dove into this project 4 days ago, and since then, I've had to reformat my SD card about 8 times before I figured out how to get it stable. But now I have it running pretty stable, there are some issues still, but it at least runs linux pretty well. I'm mainly posting this because this would have saved me a lot of digging 4 days ago, and I figured I would help out any n00bs that just got a lapdock and just started playing with webtop.
*Disclaimer* I am not an expert, if you have a problem with any of these steps, please do not post them here, but in their respective threads. I take no credit for developing any of this, im just posting a list of steps from multiple sources. Also, if you break something, its not my fault*
The Guide
By the end of this guide, you will have a more functional linux as your webtop, with the XFCE4 interface. This uses webtop2sd, so if you break anything, you should be able to start over.
You will need a rooted Atrix, a lapdock (or other external device for using webtop on), and a microSD card, I suggest 2GB or bigger. I have a 32GB PNY class 10 card, for example.
1. Lets format/partition the SD card. Sogarth explains here how to do that. I highly suggest NOT doing this on your phone,and use a PC instead.
http://forum.xda-developers.com/showpost.php?p=15109152&postcount=5
2. Here, he explains how to install it after you partition your SD card. The app you need is in the bottom of the first post.
http://forum.xda-developers.com/showpost.php?p=15109140&postcount=4
3. Now plug it in to your lapdock, and it should boot up into the new webtop. You should see 2 icons in the middle, the awn-dock config tool, and the webtop config tool. We just need to focus on the latter one. Open that up, click on Administration on the left,and click on Install by lxterminal. Try clicking on the terminal icon on the dock, if it comes up, you are gold. If it acts funky, like your screen goes black but doesn't open the terminal, open up the webtop config tool again, and the button to install it should be lit up again. You know its installed if you click install,close out the config tool, and reopen it to see Install grayed out.
4. If all goes well, you should be at a terminal. The first thing we want to do, is fix a really annoying and OS breaking bug, regarding the tzdata package. It seems to be corrupted, so we want to make sure it doesn't get in the way of installing other packages. This issue was the bane of my existence for 3 days.
following these steps, we will fix it
http://forum.xda-developers.com/showpost.php?p=18465066&postcount=3
type this into the terminal to bring up the said file so you can edit it
Code:
sudo leafpad /var/lib/dpkg/info/tzdata.postinst
then put exit 0 on the 3rd empty line
I would reboot your phone after doing this, just for good measure
5. When you get back into the webtop, lets run the Webtop Scripts, the files and instructions are here for that. This will fix many broken dependencies. Arvati did a great job with these fixes!
http://forum.xda-developers.com/showthread.php?t=1192488
just put that file in your downloads folder, then run the commands from that first code box, and I just said yes everytime it asked you what you wanted to do. I would reboot your phone again after this.
6. Now lets start installing stuff! Lets start with synaptic, which works a lot better if you install via command line instead of the webtop config tool.
So run this from the terminal:
Code:
sudo aptitude install synaptic
7. Open up synaptic by typing 'sudo synaptic' into the terminal. Lets install XFCE4 now, just search for that there,and install the XFCE4 package, it should install all of the other required packages to run the new interface.
8. Once it is installed,we need to disable the webtop interface,and enable xfce4. I referenced this thread to do that:
http://forum.xda-developers.com/showthread.php?t=1054213
Type this into the terminal to edit the right file
Code:
sudo leafpad /osh/usr/local/bin/start-oshwt-2.sh
put a # in front of
sfalv -i "awm-autostart"
sfalv -i "webtop-wallpaper"
so it looks like
#sfalv -i "awm-autostart"
#sfalv -i "webtop-wallpaper"
then add these 2 lines
sfalv -i "xfce4-session"
sfalv -i "xfce4-panel"
save it then reboot your phone. Hopefully you should be in XFCE4 now!
OPTIONAL:
*To fix an issue with mounting USB storage devices:
I had the same problem, got it to work by adding this to /etc/PolicyKit/PolicyKit.conf
Code:
<config version="0.1">
<match action="org.freedesktop.hal.storage.mount-removable">
<match user="myaccountnamehere">
<return result="yes"/>
</match>
</match>
</config>
Click to expand...
Click to collapse
http://www.linuxquestions.org/quest...b-storages-debian-squeeze-723251/#post3537149
* To Fix mounting Windows network shares
Chimpdaddy has posted a way to get Samba file shares to work, this requires having a custom kernel though:
http://forum.xda-developers.com/showpost.php?p=22018703&postcount=67
Chimpdaddy said:
Firstly you need to have a kernal, like Faux's, that supports CIFS.
Then install Samba4, via synaptic package manager if you like.
Probably an idea to reboot.
Then create a folder (using terminal) where you want yr share, 'sudo mkdir /media/SHARE' for eg..
then run this;
sudo mount -t cifs -o username=guest //YOURSHAREIP/SHARE /media/SHARE
if you get no errors yr golden
If you want it to mount on startup edit /etc/fstab to include
//YOURSHAREIP/SHARE /media/SHARE cifs username=guest,_netdev 0 0
check this with 'mount -a'
That should do you.
Click to expand...
Click to collapse
OR
You could use an app like ESFileExplorer on your phone to drag and drop files, this is what I have been using,and it works pretty well for both direct windows shares and FTP. The Mobile View is great for having a window open for secondary tasks like this.
EXPERIMENTAL:
This can be buggy,so use at your own risk!
To install chromium browser, follow these steps. This is said to have better performance than the built in firefox, but for me, it crashed a lot, I went back to firefox
http://forum.xda-developers.com/showthread.php?t=1374567
ISSUES STILL PENDING:
*currently no major issues*
LIST OF SUGGESTED APPS:
OpenOffice.org
Qalculator
XChat IRC
This looks good. I just got my lapdock on Thursday and I have been putting togther all of the Docs to get it the way I want, but this is pretty much the results I wanted. I will try your instructions and get back with you.
Thanks.
Which ROM are you running on?
stock ROM.....
Thanks for the guide.
There is one link that appears to be broken though,
On step 5, the thread goes nowhere. That's where I'm stuck right now
my bad,fixed
i actually managed to do all this on my own, but just recently came into a unexpected problem. i'm kind of a linux noob, and it seems like the file manager button on xfce4-panel doesn't lead to the stock file manager i was using before (doesn't lead to anything), does anyone have any suggestions for a good file manager to replace it with?
Thanks for the fix, I've completed all steps and it was working for about an hour. Until I installed chromium.
I have a weird problem where the lapdock doesn't detect webtop and says no hdmi input detected. Not sure if you know anything about that, but just wanted to let you guys know (might be a defect on my lapdock). I'm trying to figure out a fix for that now.
I would suggest starting over if that happened,sounds like something broke
as for an XFCE4 file manager, it should install Thunar by default
teeth_03 said:
I would suggest starting over if that happened,sounds like something broke
as for an XFCE4 file manager, it should install Thunar by default
Click to expand...
Click to collapse
sudo apt-get thunar fixed the problem for me, thanks though
followed your steps and it works great ,i've been messing with this for over a week trying to get this to work ,that ztdata bug fix did the job.. THANK YOU.....
toe451 said:
followed your steps and it works great ,i've been messing with this for over a week trying to get this to work ,that ztdata bug fix did the job.. THANK YOU.....
Click to expand...
Click to collapse
dont thank me, thank the guy who figured out how to fix it
webtop2sd app crashes on first run...any ideas?
Here's the answer
http://forum.xda-developers.com/showpost.php?p=19993891&postcount=671
bigworm50 said:
webtop2sd app crashes on first run...any ideas?
Click to expand...
Click to collapse
To the point of installing XFCE4, and synaptic just sits on preparing packages forever... I let it sit for 30+ minutes last night and going on almost 60 minutes currently...is something wrong or does it take that long?
you might want to cancel that, reboot your phone and try again, it should not take that long
can you do one on how to install Chrome instead of Firefox for a noob like myself. Thank you.
there is already a link to the chromium browser thread in the OT
I would caution that its kind of experimental, I installed it and it kept on crashing for me, so when I re-did my webtop after that,I just decided to use firefox
For step 1, can we partition this as ext4 as faux kernels support it?
added info on fixing an issue with mounting USB drives, and a note about chrome
Hello all,I had bought a local tablet from calcutta called ICE Xtreme on which I had nightmares,but it also helped me learn n now here is it,a short yet complete guide for ur allwinner devices.
Like me,some of u might have been bored enough abt the stock rom that we decide to experiment.since allwinner CPUs can boot over USB(livesuit mode) n SD cards (phoenixcard) we think nothing will b wrong n flash without a full rom backup (i hav a script uploaded here,find it n hav a look), after the flash we find the stock ROM gone,camera,touch,wi-fi etc gone haywires n cache is mounted as SDCARD!!! Yes,those who used livesuit hav been in stuff lik this. Now I was also in one n upon reading alot I hav seen ppl editing bootloaders,using keyboard mouse,plugging HDMI(lcd broken). After a month of fiddling wit my device its time i share a shortcut that can save many hours of ur life.
Also do backup the boot n bootloader on ur pc as sumtimes flashing destroys the SD.
1st step. Backup ur bootloader n boot images. Use "cat dev/block/nandc > sdcard/dump/boot.img" to backup boot..nw backup bootloader the same way,by replacing nandc wit nanda.
Now u use adb pull method to backup ur system,etc,data(its optional,only do it if u want ur apps).n any other folder from the root of ur device.my script can help u do it instantly. Anyways,u must get the etc n system folder.
After that ur free to flash any ROM image through any method (actually,livesuits the best if u can find the img). Now after flash ur device is on right?? Does the SDCARD mount??if no then turn on USB debug,in adb shell type cd dev/block <enter> then type ls n ull see a list of nand partitions,the last one is the SDCARD in raw format.so format is by: su busybox mkfs.vfat dev/block/nand[drive letter,i.e. nandj] n then type vold.ur sdcard will mount.
Now send those boot n bootloader files to SDCARD/dump. U can use mkdir or mannually make the dir n copy. Thn simply type "cat sdcard/dump/boot.img > dev/block/nandc" n same way type nanda n bootloader to restore the bootloader. Now use adb to push the files of ur stock ROM system/vendor/modules(which u backed up earlier) to tablets system/vendor/modules. N the contents of etc folder to etc on the tablet.nw reboot.
Hey!!! Its working.the LCD shift is gone,cam n wi-fi doing good,touch is not reversed or stuff. Congratulations u restored ur tablet,n now running a completely diffrent ROM on it.enjoy.
Heres another shortcut ive learned. U can get any update.zip n convert it to licesuit image. Just extract the system dir. Thn copy it to ur SDCARD. Make modification if needed,copy the modules u backed up.In adb shell type make_ext4fs -s -l 300M -a system <filename.img> (dir of ur system,i.e mnt/sdcard/system) it will make u a .img file which is same as the system.fex file u get when u break a livesuit image. Copy n replace the ROMs boot n bootloader.fex files wit ur backed up boot n bootloader.img (rename .img to .fex) pack the image again to livesuit format n burn it. It will install like a normal ROM. BUT MAKE SURE FILE PERMISSIONS OF READ WRITE N EXECUTE IS INTACT. ELSE ULL ENJOY HOURS OF BOOTANIMATION. but if ur stuck use the method above n flash any other ROM n fix the RON fr ur device. Guys ROM developing n editing fr allwinner devices are not easy...BTW id lik to thank user [iamabadduck] fr his actual A10 backup script. On which i made mine. Im still doing experiments. Hope this info i shared makes the readers modest enough to make the hit thanks. Bye. [ ill b around,so if any quests,ill ans them].
I was very excited to see someone finally post a guide for these mysterious tablets! Thank you!
However, I ran into some difficulties trying to make use of them, but I think this has more to do with my hardware and trying to match it with the appropriate ROM and compatibility zip.
You see, I have a Kocaso M1060W. It's a very nice little tablet but trying to identify it has been difficult. As far I can tell, it's a clone of the Protab2XXL (I don't know what version) or something called the BC1077. It seems easier identifying other Allwinner A10's, apparently. I know some identifying information can be found in the build.prop file and that's how I figured out the tablets of which it is a clone. I even tried finding a database of different ImageSuit images I could try to use, but either there is none or my Google skills are suffering. Does it matter that Kocaso chose to go with PhoenixCard for flashing their tablets? Some documentation suggests the images for both are the same.
Can you help me find documentation that would help me identify the board and the hardware? Let me know what information you need from the tablet, and I will get it to you. Identification would go a long way towards me making use of your steps.
Also, a question. After the rom is flashed and you "adb shell" in, you have me trying to mount the sdcard directory via the nand block devices, and then entering "vold". It doesn't error but nothing seems to happen. Even stranger, running "mount" tells me that it's done something. Is it because most of the ROM flashes require the data wipe that I should assume I have the capability to read/write within the SDCARD directory?
Allwinner A10 ghost touch (Icoo D70W, goodix chip)
Hello There!
I've got this tablet since last year, but it worked brilliantly for four minutes only.
Here is some detail:
ICOO D70W, Allwinner A10 board , 1 Gb of RAM and 8Gb storage, ICS android.
7 inch IPS display on 1024X600 resolution capacitive multitouch.
The original firmware was a nightmare, so slow , and full of chinese thing with no google play, quick decision -> get another firmware.
I've installed an actual version of AOKP ( I think it was the 9th version) and I used one of those comp file which was for an ainol tablet same hardware details.
After this , my big four minetes has started until a figured out the camera does not work.
I used another compatibility file, from a hyundai tablet same camera details, camera ok , but the touch chip went down and cannot get back, since that.
Ghost touches on the screen, but the normal touches are recognised as well.
Do you have any idea, how to reflash that touch driver chip?
attached files from the original firmware, maybe give some help:
And a video on y_-tube, with this watchcode: YfNZf2BgL3w or use "ICOO D70W ghost touch problem" keyword
Thanks in advance.
Zsolt
Compatability
konyazsolt said:
Hello There!
I've got this tablet since last year, but it worked brilliantly for four minutes only.
Here is some detail:
ICOO D70W, Allwinner A10 board , 1 Gb of RAM and 8Gb storage, ICS android.
7 inch IPS display on 1024X600 resolution capacitive multitouch.
The original firmware was a nightmare, so slow , and full of chinese thing with no google play, quick decision -> get another firmware.
I've installed an actual version of AOKP ( I think it was the 9th version) and I used one of those comp file which was for an ainol tablet same hardware details.
After this , my big four minetes has started until a figured out the camera does not work.
I used another compatibility file, from a hyundai tablet same camera details, camera ok , but the touch chip went down and cannot get back, since that.
Ghost touches on the screen, but the normal touches are recognised as well.
Do you have any idea, how to reflash that touch driver chip?
attached files from the original firmware, maybe give some help:
And a video on y_-tube, with this watchcode: YfNZf2BgL3w or use "ICOO D70W ghost touch problem" keyword
Thanks in advance.
Zsolt
Click to expand...
Click to collapse
If you could Post an lsmod from both the Working Firmware and the Non-Working I will take a swing at answering your question...The problem is likely one compat file is installing drivers for one of Your pieces of hardware and not the other and the other compat file is istalling the driver for the other piece but not the One... confusing sounding...
But Bottom Line is If I had the Lsmod from the working Hardware and the 2 compatability files you tried I could likely alter one of the compatability files to cover All of your hardware.
Or better yet pull the Bootloader.img and the Boot.img out of your Tab and send them to me...
you can do this by opening a cmd window from a directory where you wish to store the .img files then type the following :
adb shell su -c "cat /dev/block/nandc > /mnt/sdcard/nandc-root.img" (Press enter Key)
adb pull /mnt/sdcard/nandc-root.img (Press enter Key)
That will give you the Boot.img (named nandc-root.img)
adb shell su -c "cat /dev/block/nanda > /mnt/sdcard/nanda-bootloader.img" (Press enter Key)
adb pull /mnt/sdcard/nanda-bootloader.img (Press enter Key)
That will give the bootloader.img (named nanda-bootloader.img)
send those from both your OEM Rom that is working and the Target Rom you wish to make work .... from that I can either write a compat patch for it or send back the edited ones from your Target Rom (the one you wish to work)
Srry i cudnt keep my promise of being around. Had been pretty busy looking for stock JB ROMs in livesuit format. Found some. Some worked n some didnt. Will abt the touchscreen issue if that Rom has a focaltech ftx_5x touchscreen its broken. U hav to compile it again leaving out the multitouch part in a header file. Do a google search. There r alot of articles. N abt da nand part well not all roms break the internal SD partition. The busybox thing u do only when ur internal cards dont mount. It will NOT WORK FOR A MICROSD IF U HAV ONE. Its generally mounted as extsd.
Try reading from here:
konyazsolt said:
Hello There!
I've got this tablet since last year, but it worked brilliantly for four minutes only.
Here is some detail:
ICOO D70W, Allwinner A10 board , 1 Gb of RAM and 8Gb storage, ICS android.
7 inch IPS display on 1024X600 resolution capacitive multitouch.
The original firmware was a nightmare, so slow , and full of chinese thing with no google play, quick decision -> get another firmware.
I've installed an actual version of AOKP ( I think it was the 9th version) and I used one of those comp file which was for an ainol tablet same hardware details.
After this , my big four minetes has started until a figured out the camera does not work.
I used another compatibility file, from a hyundai tablet same camera details, camera ok , but the touch chip went down and cannot get back, since that.
Ghost touches on the screen, but the normal touches are recognised as well.
Do you have any idea, how to reflash that touch driver chip?
attached files from the original firmware, maybe give some help:
And a video on y_-tube, with this watchcode: YfNZf2BgL3w or use "ICOO D70W ghost touch problem" keyword
Thanks in advance.
Zsolt
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1520943
It's a thread about the allwinner A10 or EKEN T01A.. it shows how to reflash to original and updated EKEN firmwares via livesuit. And also i think they mentioned something about touchscreen issues. Hope it helps
Hi please help me! I have nightmares too with my tablet:
Hi, i have a mid tabler model HBD-Mid-708G like that http://marcopolocompany.fucsio.com/e...oducts/MC-708G . This is a Boxchip a10 with 11 partitions, i get this info throw ADB.
My problem was try to install CWM getting the error Can´t Mount / Read!!!!!
I have been used this roms:
F1-4.1.1-20130319.2.0.6-A721_v4.2
pdf_android4.0.10_ctp7_public_en_0319
Q7_512M+flash+Gmail
rom_woo_comet_404_291112_0cd4d
RSH-A10-C2
speed.1.1.1
sun4i_crane_t01a-linsay-20120411
and only rom_woo_comet where some Ok! .
Solved this CWM problem flashing a rom_woo_comet using LiveSuit but the result is an screen resolution problem: (the image attach) .
So please any can say me a correct rom?
Thanks
accessing nand
hi there,
this is interesting stuff you are talking about here. Unfortunately, I get stuck to the beginning. How do you access the nand???
you say sart with cat dev/block/nandc > sdcard/dump/boot.img
I'd love to but where do you enter these commands? When I connect my tablet to my computer, I see certains parts as usb storage, and I have no way of entering commands to the tablet. From within android, everything is blocked...
thanks for your help
nacxo said:
Hi please help me! I have nightmares too with my tablet:
Hi, i have a mid tabler model HBD-Mid-708G like that http://marcopolocompany.fucsio.com/e...oducts/MC-708G . This is a Boxchip a10 with 11 partitions, i get this info throw ADB.
My problem was try to install CWM getting the error Can´t Mount / Read!!!!!
I have been used this roms:
F1-4.1.1-20130319.2.0.6-A721_v4.2
pdf_android4.0.10_ctp7_public_en_0319
Q7_512M+flash+Gmail
rom_woo_comet_404_291112_0cd4d
RSH-A10-C2
speed.1.1.1
sun4i_crane_t01a-linsay-20120411
and only rom_woo_comet where some Ok! .
Solved this CWM problem flashing a rom_woo_comet using LiveSuit but the result is an screen resolution problem: (the image attach) .
So please any can say me a correct rom?
Thanks
Click to expand...
Click to collapse
You need to edit your script.bin inside the bootloader.img... there is a utility to do this on techknow.me...
to do it manually you need to extract the script.bin file from the bootloader.img ... easiest way is from adb shell
Open a windows command window (this assumes you have adb.exe in your Path .. if not you must do this from the
same folder where adb.exe is located)
type the following
adb shell su -c "cat /dev/block/nanda > /mnt/sdcard/nanda-bootloader.img"
adb pull /mnt/sdcard/nanda-bootloader.img
this will place a file called nanda-bootloader.img in the folder where you ran the windows command window.
Now copy the file to your Linux Machine or VM
and from a terminal do the following:
mkdir bootloader
sudo mount -t vfat ./nanda-bootloader.img bootloader
This mounts the bootloader image to the bootloader folder.... in the bootloader folder copy the script.bin file to another location for editing.
to edit it must be converted to fex... you will need the fex tools for this I have them posted here: http://www.4shared.com/zip/Nzn6PV-b/tools.html
your Linux machine has to be x64 for those to work.
from the folder containing the tools folder and script.bin file open a terminal and do the following:
./tools/bin2fex script.bin > script.fex
this will create the script.fex file which is editable in a linux text editor, open the file and edit the [lcd0_para] section
to correct your screen shift ... the exact settings needed are impossible for me to determine as I do not
have your tab nor the rom you originally had on it.. if you have the original rom available (with screen position correct)
you can pull the script.bin from that rom and replace the entire [lcd0_para] section with the same section from your working rom
to solve the issue.
once edited convert back to .bin from a terminal with the following commands:
./tool/fex2bin script.fex > script.bin
now open the bootloader folder as superuser and delete the script.bin and script0.bin located inside...
copy the new script.bin file in and also copy it and rename the copy to script0.bin and place that there as well.
then from folder containing bootloader folder open a terminal and do the following:
sudo umount bootloader
now copy nanda-bootloader.img to windows machine.
open a Command window in the folder containing your new nanda-bootloader.img file and do the following
adb push nanda-bootloader.img /mnt/sdcard
adb shell su -c "cat /mnt/sdcard/nanda-bootloader.img > /dev/block/nanda"
adb shell rm /mnt/sdcard/nanda-bootloader.img
adb shell su -c "sync"
adb shell su -c "reboot"
if all was done properly your tab should now reboot with the correct screen geometry. The utility I mentioned does
pretty much all of this for you, but i cannot link it here as it is on techknow.me which requires registration to
download ... and the rules forbid links to such sites here.
I hope that all helps you.
---------- Post added at 12:24 PM ---------- Previous post was at 12:16 PM ----------
djahma said:
hi there,
this is interesting stuff you are talking about here. Unfortunately, I get stuck to the beginning. How do you access the nand???
you say sart with cat dev/block/nandc > sdcard/dump/boot.img
I'd love to but where do you enter these commands? When I connect my tablet to my computer, I see certains parts as usb storage, and I have no way of entering commands to the tablet. From within android, everything is blocked...
thanks for your help
Click to expand...
Click to collapse
You must have the ADB drivers installed and know where they are located, placing them in your Path statement is a good idea if you intend to do much ROM editing or direct Tablet commands from and adb shell.
NOTE: To open a command window from any folder on your computer in Explorer browse to the folder you want to open command window from
then in an area of the folder window that is empty right click mouse while holding shift then select open command window here
Once you have ADB INstalled, if the adb.exe is in your path open a command window from any folder you like on windows and type the commands in the command window. If ADB.exe is not in your path you must open a command window in the folder containing adb.exe
(Usually the android SDK Platform tools folder)
I Hope that helps
Thanks fsebentley, I've now copied all nandX partitions.
what I'm trying to do now, is to create a bootable sd card. I believe I must tailor u-boot.bin to boot a specific kernel with my specific hardware setup.
I've found a lot of resource for arm boards, but almost none for tablets, except for direct flashing but I'm not ready to go this far.
So, do you know about a nice tool to read what's in u-boot.bin and eventually modify it?
Touchpad driver
Hi!
I need some help!! I want to include touchpad driver an cm9 installer because when I instal the system with CWM but the touchpad not working!!!
Here is the topic where you can find the ROM: http://forum.xda-developers.com/show....php?t=1861445
Sorry I write here because I can't write in the original topic.
Thank for help!!!
Apad 711 stuck at boot logo
Hi Guys,
I need help. one of my friend has a Apad711 tablet and his stock android recovery was changed by cwm 5.08 incorrect version and hence the power + - or power button was not responding.
I took over and had flashed 6.0.2 8 cwm by following this forum http://forum.xda-developers.com/showthread.php?t=2189640
and recovery was working properly, but then i though of upgrading it to cyanogen mod 9 and downloaded the files using this forum
http://forum.xda-developers.com/showthread.php?t=1760929
however after the update was completed the touchscreen didnt work and I had to connect a usb OTG cable along with usb mouse to get into recovery. I then did a little research and tried flashing a couple of compatibility zip
711i_compatibility_1.1.0.zip, lyf1_compatibility_1.1.0.zip, 711i_compatibility_1.2.0.zip, lyf1_compatibility_1.2.0.zip which had similar specs from this website http://old.androidfilehost.com/main/Allwinner_A10_Developers/christiantroy/misc/
but even after doing so touchscreen,camers etc didnt work.
since i had made a backup of stock rom using cwm before flashing cyanogenmod 9 i thought of restoring it back using cwm 6.0.2.8
i was able to restore the back up but to my surprise i am now stuck at apad boot logo and cannot boot to recovery using the volume - and power key. i tried to connect the tablet to pc so that i can get into adb interface and reboot to recovery but the computer detects the tab as unknown device
I now need help to get into recovery and flash a rom that would make it work or complete tutorial to install/flash a new /stock rom or cyanogenmod to get the device back to life.
please refer to the manufacturers website link listed below for specs:--
http://www.apadtab.com/711_spec.php
Any help would be greatly appreciated.
allwinner a10., broken bootloader
Hi i've got a eneoze tablet with an allwinner A10., now i've flashed my bootloader with berryboot en it was working., later i wanted to change some things in de configs of the berryboot bootloader and i messed up. Now my tablet is completely dead.
It doesn't doe anything when i try to turn it on., de screen doesn't even light up., it isn't recognised when i connect it to the pc so fastboot., adb aren't working eather.
Do you have any ideas on how to resolve this.?
Greets Sam
sammekevremde said:
Hi i've got a eneoze tablet with an allwinner A10., now i've flashed my bootloader with berryboot en it was working., later i wanted to change some things in de configs of the berryboot bootloader and i messed up. Now my tablet is completely dead.
It doesn't doe anything when i try to turn it on., de screen doesn't even light up., it isn't recognised when i connect it to the pc so fastboot., adb aren't working eather.
Do you have any ideas on how to resolve this.?
Greets Sam
Click to expand...
Click to collapse
If you can't flash it from your pc, create a bootable sd card. For example, you could copy your berryboot image to the sd card and boot from it.
Supposedly, you saved your tablet nand into an image before messing up with that nand. Once you boot from sd, flash the nand again with that saved image. Good luck to you
need a little help
i wnt to increase resolution of my a10 tab from 800x480 to 1024x600....to do so i need to edit the bootloader(bootloader.fex)
but,the problem is i can't edit the bootloader.fex correctly......how to edit properly
After breaking the screen on my phone I spent the following months reading about how to extract data. It all comes down to enabling ADB debugging and having your computer authorised. Usually this can be done from recovery and you're good to go. However, if you have a broken phone that is fully stock, with ADB disabled and with no custom recovery support then your data is as good as bricked. Such was the case with me when I broke my rare Samsung G360G. However, my phone was supported by CF-AutoRoot by Chainfire, and this gave just the opening I needed to go full wide.
Prerequisites:
Your phone needs to be supported by CF-AutoRoot. Check on there and the new site linked for support of your phone. If it's not there then you will need to download a stock ROM and use the CF-AutoRoot site tool to generate a root package for you. But that is outside the scope of this tutorial. This procedure has only been tested on Samsung. Your phone should have a minimal working charge.
https://autoroot.chainfire.eu/
This tutorial is also based on Linux. It should be translatable to Windows and Cygwin. But for simplicity I'll just use the method I used on Linux. However, if using Odin like I do, you'll need Windows to finish it off.
Aside from this it assumes files in are named in a particular format with a certain file format.
Tutorial:
1. First you need to download a CF-AutoRoot package for your phone. Won't get far without it.
2. Open up a terminal in Linux. We need to download some depends so enter this command:
Code:
sudo apt-get install android-tools-adb android-tools-fsutils
3. We need to extract the archive contents out. Create a suitable folder inside your home folder to build the patch in and cd to it. This uses an example file named CF-AutoRoot-example.tar.md5. Substitute with your actual archive name. Like so.
Code:
mkdir cfar-adb
cd cfar-adb
tar -xf CF-AutoRoot-example.tar.md5
4. There should be a recovery.img and a cache.img.ext4 extracted out. We just need to modify the cache.img.ext4. But first we need to convert it to a workable format. From a sparse to a raw image.
Code:
simg2img cache.img.ext4 cache.raw.ext4
5. We need to mount the cache image
Code:
mkdir cache
sudo mount -t ext4 -o loop cache.raw.ext4 cache
6. The big one. Doing the mod. So now we need to modify the cfar cleanup script. We need to insert commands on the end to enable ADB and add the key to authorise the computer. The following will do just that in this fashion.
a)
You will need to load in the cfar-cleanup.sh file inside the cfroot folder from the cache point mounted. Locate the end and paste the following lines before the reboot and exit commands on the end. Don't save yet.
Code:
echo -n 'mtp,adb' > /data/property/persist.sys.usb.config
mount -o remount,rw /system
echo '' >> /system/build.prop
echo 'persist.service.adb.enable=1' >> /system/build.prop
echo 'persist.service.debuggable=1' >> /system/build.prop
echo 'persist.sys.usb.config=mtp,adb' >> /system/build.prop
chmod 644 /system/build.prop
mount -o remount,ro /system
mkdir -p /data/misc/adb/
echo '' >/data/misc/adb/adb_keys
chmod 640 /data/misc/adb/adb_keys
b)
Load up the ~/.android/adbkey.pub file in a text editor and copy the entire contents in the clipboard. Now back at the script locate that last echo command you pasted into it and set the cursor just after the first single quotation mark. Now paste the clipboard in! This will add your key in. Make sure it's only between the single quotes with no extra characters or line feeds. The lines will naturally split if they don't fit on screen. Otherwise it should be good to go.
c)
Okay now save the file. The above will enable ADB and authorise your computer on the main Android system after the rooting script has done it's work. Before it reboots normally.
7. We need to unmount the cache so it's ready for use.
Code:
sudo umount cache
8. We need to convert the raw image back into a sparse image.
Code:
img2simg cache.raw.ext4 cache.img.ext4
9. Okay were almost done. Now we repack the files into a new Odin archive. Choose a suitable new filename. Like I have done here with my example file.
Code:
tar -H ustar -c recovery.img cache.img.ext4 > cfar-adb.tar
md5sum -t cfar-adb.tar >> cfar-adb.tar
mv cfar-adb.tar cfar-adb.tar.md5
10. The final step! So now the new package is ready for use. We just to use Odin and flash it to the phone. Save the package to a USB stick if needed.
a)
Reboot into Windows. Or you can run it virtualised from Linux. But I prefer to use the real things when dealing with things of a delicate manner and working blindly. Unplug your phone from the computer if connected. Now load up Odin in admin mode.
b)
Just to make sure pull the battery from your phone. Give it a few seconds then put the battery back in and click the back cover on. Now hold down volume down, then home key, and finally hold down power. Wait for the vibration. Then release power after a few moments. Finally release the other keys. At this point press volume up briefly. You should have just put your phone blindly into download mode. I've done this numerous times.
c)
Plug your phone into your computer. After a moment you should see Odin respond with a device added. Usually the phone can vibrate also when it connects giving more positive signs. If nothing happens disconnect the phone from the computer and retry the last step again to put it into download mode. Took me a few tries before I could do it blindly. It helps if you have a working Samsung to test it out on so you can see what happens before you can only feel it.
d)
Now in Odin press the PDA (or AP) button. Select the cfar-adb.tar.md5 package you made up. If the package is fine it will pass the md5 test. Now press the Start button and watch it go! If all goes well it will upload recovery, cache, give you a pass and then the phone will reset. At this point it will be in the process of being rooted, enable ADB, then reboot. If something goes wrong then you may need to go back and check all the patched files. Then rebuild the package again. But be careful, if the ADB has been enabled in the build.prop file one time, you don't want to add it in again and create duplicates, no matter how keen. Once I had it added the only other major problem I encountered was using the correct adb key.
e)
Hopefully now your phone is rooted, has ADB enabled and is booting up normally. Give it a few minutes. You can even see signs of life in Odin with adds and removes on USB activity. Your phone should also vibrate at times. And making noises is also a good sign.
1.1. So I just cranked it up to eleven. Open a Linux terminal again and give it a test. With your phone plugged in.
Code:
adb devices
If all goes well then adb will find your phone as well as list your device as authorised. You can now open shell to the inside. USB debugging is now enabled.
Conclusion:
Well I hope this helps those who have their app data stuck under a broken screen. As long as it was to type in this tutorial It still took me less time to write this tutorial than to learn all that was needed and apply it to my phone. This ends here but for you it may be only the beginning. A next step would be a screen mirroring app which I think is a must have for visual feedback. And USB debugging opens up these possibilities. One thing to be careful of, in a related issue, is that just because you can use adb and the phone is also rooted doesn't mean it will all work at once. If you are tempted to "su" it in an adb shell and get right in there then SuperSU will ask for permission on a blank screen. As will also happen if you try to do an adb backup, it will ask for confirmation on screen. So just expect to work with USB debugging blindly unless you already have a screen mirroring app installed. If you don't have one installed that is your next step.
And on that note. Good luck!
Hi there,
Your tutorial on how to achieve this on Linux looks real neat and complete. Unfortunately, i'm on Windows and i would like to know if you would be able to rewrite this totorial for a Windows user?
I've been reading online for about a week and i've never saw such a complete guide to help newbies to ADB to be able to retrieve data on their locked broken devices.
Cheers!
Hi RaiM1986 and thanks for your kind words. Yes I wrote it so it would be useful to newbies and seasoned hackers alike. Plus I needed to write down some instructions in case I need to do it all again.
Looking at the tutorial it is a bit Linux-centric. I don't know how well it would translate to Windows. Though there would be Windows version of the tools used the main problem would be mounting the filesystem image and making modifications without corrupting it. Because of things like Linux file modes.
However the following tools may be of assistance.
ADB tools:
https://wiki.lineageos.org/adb_fastboot_guide.html
Cygwin provides Linux tools if needed:
http://www.cygwin.com
simg2img:
https://github.com/KinglyWayne/simg2img_win
For mounting the ext4 image:
https://www.osforensics.com/tools/mount-disk-images.html
img2simg and other tools:
https://forum.xda-developers.com/showpost.php?p=49235638&postcount=5
For the ADB key it should be in %USERPOFILE%\.android and other spots I've read of are C:\Windows\System32\config\systemprofile\.android
In case any of the above fails, since I haven't tested them, the easiest alternative might be to just download a Linux live CD, boot it and do the steps inside. Of course any work is lost when you shut it down. You could also boot it in VM program running on Windows.
Amazing guide, Hypexed! The amount of work you put in to figure this out is incredible.
However, I'm stuck on step 6c, where I'm supposed to save the cfar-cleanup.sh file. It's not letting me save it at all, either within the mount point or to another location, it says that I don't have permissions to save the file. I tried the 'sudo chown' to change ownership to try to edit the permissions, but that didn't work either with it still saying I can't have access to the file. Any ideas? There is probably a simple solution, but this is my first time really using Linux so I'm a noob. I'm using Ubuntu 18.04.1LTS installed, not live, dual-booted with Windows, if that's important to know
SpinningQyarks said:
Amazing guide, Hypexed! The amount of work you put in to figure this out is incredible.
Click to expand...
Click to collapse
Thank you for noticing. It really was the culmination of months of hacking and cracking. Not to mention research. I decided I had to write a guide so I could document what I did in case I needed to do it again. And of course if it helped anyone else.
However, I'm stuck on step 6c, where I'm supposed to save the cfar-cleanup.sh file. It's not letting me save it at all, either within the mount point or to another location, it says that I don't have permissions to save the file. I tried the 'sudo chown' to change ownership to try to edit the permissions, but that didn't work either with it still saying I can't have access to the file. Any ideas? There is probably a simple solution, but this is my first time really using Linux so I'm a noob. I'm using Ubuntu 18.04.1LTS installed, not live, dual-booted with Windows, if that's important to know
Click to expand...
Click to collapse
Sorry you got stuck. I can see some issues in my guide. Especially after trying to do 6c again. First I notice I didn't specify where to store all the folders. Somewhere in the home folder obviously but it looks like you sorted that out fine.
I have tested a working solution to the permissions problem. In fact two:
1. Locate cf folder in the cache mount point on the desktop and go into it. Now right click in the window to bring up the context menu and select "Open as Root". Open up the editor as before.
2.. In the terminal run the editor as root. For example:
sudo gedit cfar-cleanup.sh
I've tested this on Mint which is a "relation" of Ubuntu so should work the same.
Now the original permissions should be left intact. I checked and they didn't have the execute bit set which is unusual. It may help here to save your work on the file to a place you can save to in the meantime. So you don't get stuck again. And then unmount your cache mount point, extract the raw image again as per step 4 and remount as per step 5, if the permissions need restoring. They really should be as they are originally set in the image.
Then continue through to step 6 and beyond as you were.
Good luck!