Is there is any program or script to restart my phone in flash mode (green lightt mode)
Its realy important please
my phone wt19i
turn off your phone, press the back button, then connect the phone to the pc through USB while holding back button.
StereO_ said:
turn off your phone, press the back button, then connect the phone to the pc through USB while holding back button.
Click to expand...
Click to collapse
i know this
but is there any other way to do it?
i dont know.
up up up..
up to reply
Related
when i press an "up" button.. it functions as a down button ..
and a down button as an up button..
and power button is not working..
ive been trying to get into a download mode
but when I do a "press up and downbutton +plug usb + plug a battery" trick to get into the download mode
the recovery mode screen automatically appears...
so stressed now..
I would be greatly appreciated if anyone can help me out
All of this and more can be found in the Noob Guide in the general section op by S15274N
You are in recovery mode if it says "2E" or "3E" recovery you should be able to get into download mode and then you can flash back into stock.
To get to download mode plug in you usb into the computer first. then, hold the volume keys both down then plug into the phone (while it is showing the recovery mode, in other words it is still on) if it does not work, then pull out then try again a couple of times When you plug it in leave for 2-3 secs. There are other methods in the noob guide to try as well. If this does not work or you can't get it Then, just buy a Jig from the xda member connextion2005 (mobilevideotech.com I think). they are 8 bucks and all you do in just plug it in and it will bring up the download mode. From there you can do this:
Get the Odin program 1.7 or newer, get the Stock 2.1 Tar file, get the 512pit file
You can find these in the general forum in the thread called Noob guide
then:
Open Odin, plug in your phone, put into download mode. connect it to the computer it will recognize might say com8 or some other number
Load the PIT file into the appropriate area and the .tar in the PDA area.
You want to check the 're-partition' box.
Now click start, let it finish, and this time your phone will load up just fine!
Then, root the phone and you can flash your new Rom.
Use the super oneclick method it is easier to root then download Rom manager and now you can flash any rom you want
This is solvable good luck
nemesis0224 said:
when i press an "up" button.. it functions as a down button ..
and a down button as an up button..
and power button is not working..
ive been trying to get into a download mode
but when I do a "press up and downbutton +plug usb + plug a battery" trick to get into the download mode
the recovery mode screen automatically appears...
so stressed now..
I would be greatly appreciated if anyone can help me out
Click to expand...
Click to collapse
Lets do this one
dont take the battery out
just press down vol and up vol without power and plug the usb
tell me if it worked
NO,, It didn't work..
the problem is that the recovery mode appears instead as soon as i plug the usb..
even if i tried the old method I've been using for..(this one used to always work but not anymore..)
1. Remove SD and SIM card
2. Remove battery
3. plug the phone into USB
4. hold down vol-up and vol-down
5. Pop the battery back in while holding vol buttons
This may work if not.............
Just get the jig it works and will solve this problem
Hello, I'm new on this site, and already I need help.
Here is problem:
I rooted my Xperia S, and I regret for that (it's kind of slower, and I hate that) but beside that, I was trying to find solution to speed it up. U flashed the kernelV2, I mean that I think I was xD And then my wifi didn't work. So I googled up a lil bit, and find the kernel named "DooMKernel". I followed instructions and nothing, so I shut down my phone, actually reset it (holding POWER buton and VOLUME UP until it vibrates 3 times), and after that nothing, my phone wont turn on. As I remember my phone was at 35% of battery. And only hope that I have is, when I plug USB in my laptop, it makes a sound of connected device, and install SEMC Flash Device . I'm very afraid that my phone is broken, cause, I have it about 10 days, and I'm new android user. Don't take me too noob, I read lot of forums, tips, solutions, but in the end, I'm new in all this.
So, please does anyone have any solutions, what can I do? Please! (P.S. my phone is plugged in charger for about half of hour, without any response or light)
Thank you all, anyway.
Are you on ics rom? If yes doomkernel wont work
Connect phone to pc in fastboot mode by pressing power and vol up hold it till the first vibrate now release only the power button if the led turns blue flash the xsx kernel (example)
If you are on gb rom try to reinstall the system using pccompanion enter flasode by pressing power and vol up till the first vibrate now only push vol down and flash
Sent from my LT26i using xda premium
mericon said:
Are you on ics rom? If yes doomkernel wont work
Connect phone to pc in fastboot mode by pressing power and vol up hold it till the first vibrate now release only the power button if the led turns blue flash the xsx kernel (example)
If you are on gb rom try to reinstall the system using pccompanion enter flasode by pressing power and vol up till the first vibrate now only push vol down and flash
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Thank you for response.
I tried that, to put it in fastboot mode, nothing. My phone doesnt show any kind of led light in any situations (red when is in charger, blue in fastboot mode, green is flashmode). Only when I connect my phone on laptop it makes a sound of new device connected named SEMC Flash Device. I was thinking to fall apart my phone, to put out battery, maybe that would help.
It helped!!!! I didn't see your answer very well. Thank you!!! Is there anyway to put phone back unrootet, cause I don't like it, its kind of slowy
mericon said:
Are you on ics rom? If yes doomkernel wont work
Connect phone to pc in fastboot mode by pressing power and vol up hold it till the first vibrate now release only the power button if the led turns blue flash the xsx kernel (example)
If you are on gb rom try to reinstall the system using pccompanion enter flasode by pressing power and vol up till the first vibrate now only push vol down and flash
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Can you give me some advice, what kernel to use, how to flash it, ect?
I'd give you a big hug, you don't know how much you helped me (nothing gay)
Try this to install the drivers correctly
http://forum.xda-developers.com/showthread.php?t=1554632
Sent from my LT26i using Tapatalk 2
try this:
hold the power button + volume up then wait till it vibrates 3 times, your phone will power off,
1. install flashtool
2. download ftf
3. paste the ftf on c:\firmwares\
4. open flashtool then click the lighting icon, choose fastmode, choose ftf and wait until it says (power off phone then connect via fastmode), since your phone is power off all u need to do is to connect the phone and then hold the power button+ volume down.
5. then it will reinstall your firmware.
6.after installing unplug your phone then power it on.
voila its working now
help how can i turn off this unit? it shows the Sony Ericsson name in the Screen
i bricked it..and i want to update it using SEUS but i should turn it off but i tried to hold the button but nothing happened..
i hope you could help me about this..thanks:highfive:
P.S. Newbie :crying:
connect your phone with SEUS and wait untill u see detecting phone after the model choice screen...... once it asks u to turn off the phone , press home button and power button u will hard reboot the phone quickly hold back button and connect usb u will have no problem
alienwrz said:
connect your phone with SEUS and wait untill u see detecting phone after the model choice screen...... once it asks u to turn off the phone , press home button and power button u will hard reboot the phone quickly hold back button and connect usb u will have no problem
Click to expand...
Click to collapse
I have same problem but i cant flash my X10mini nothing happens on flashtool pls help me!
Hi guys,
i was tring to get root on my xperia p with firm 6.1.1.B.1.54 but i flashed the wrong kernel(for xperia U) and now the phone doesn't start at all and i cannot enter in flashmode for reflash a new kernel..
if i press volume + and power button the phone starts to vibrate for a while..(atthe first time i could see a red light and violet light and the red again led)
if i press volume - and link to computer nothing happens.
flashtool can find the device but it says to plug the phone into flash mode...
what should i do???
help
Thanks
KOKOPELLIS said:
Hi guys,
i was tring to get root on my xperia p with firm 6.1.1.B.1.54 but i flashed the wrong kernel(for xperia U) and now the phone doesn't start at all and i cannot enter in flashmode for reflash a new kernel..
if i press volume + and power button the phone starts to vibrate for a while..(atthe first time i could see a red light and violet light and the red again led)
if i press volume - and link to computer nothing happens.
flashtool can find the device but it says to plug the phone into flash mode...
what should i do???
help
Thanks
Click to expand...
Click to collapse
after a lot of attemps ... i solved by using the volume + and power while it was linked to pc and after unlinking and linking in normal flash mode..
KOKOPELLIS said:
after a lot of attemps ... i solved by using the volume + and power while it was linked to pc and after unlinking and linking in normal flash mode..
Click to expand...
Click to collapse
i have the same problem with you. i tried it but nothing happen. i dont access to fashboot mode and flashmode .....
bloodtear225 said:
i have the same problem with you. i tried it but nothing happen. i dont access to fashboot mode and flashmode .....
Click to expand...
Click to collapse
First make sure you have installed the fastboot and flashmode drivers. Remove the datacable from PC. Press & Hold Volume Up Button and insert the datacable to PC to trigger Fastboot Mode. Press & Hold Volume Down Button and insert the datacable to PC to trigger flashmode.
bloodtear225 said:
i have the same problem with you. i tried it but nothing happen. i dont access to fashboot mode and flashmode .....
Click to expand...
Click to collapse
Probably the phone is not switched off cause you can't see anything... So be sure that is switched off and try again.that is essential.. Don't panic... U can solve it like I did
i'm trying to enter flash mode but i always fail to...
All the phone do is boot up normally into system
I tried pressing back button while plugging the phone in usb
I tried pressing POWER+HOME+BACK and then pressing BACK after phone going black... but it doesn't go black anyways
I don't know what to do... The phone itself works normally and i can enter into xrecovery
fabiode34 said:
i'm trying to enter flash mode but i always fail to...
All the phone do is boot up normally into system
I tried pressing back button while plugging the phone in usb
I tried pressing POWER+HOME+BACK and then pressing BACK after phone going black... but it doesn't go black anyways
I don't know what to do... The phone itself works normally and i can enter into xrecovery
Click to expand...
Click to collapse
Take out your battery for about 15 seconds or so. There may be some static buildup causing this.
And if you want to do a hard reboot, just press home and power together with the usb-cable connected. It might enter flashmode automatically, but it can't hurt to press the back-button when the screen goes black.
Thanks for the reply...
But none of the methods work. The phone doesn't hard reboot and i tried removing the battery for 30 seconds and nothing... doesn't work.
Is there a adb command to reboot into flashmode?
fabiode34 said:
Thanks for the reply...
But none of the methods work. The phone doesn't hard reboot and i tried removing the battery for 30 seconds and nothing... doesn't work.
Is there a adb command to reboot into flashmode?
Click to expand...
Click to collapse
I don't believe there is an adb-command for that. Are all your buttons working properly? You can also enter CWM and choose reboot. Same thing, as soon as the screen goes black, hit and hold the backbutton, leave the usb-cable attached.
And make sure the program is asking for flashmode before you try entering it, otherwise it won't stick.
i will try it...
All the buttons is working 100% on system
EDIT:
i'm unlucky with this phone...
pressed reboot and then pressed back button... booted directly into system
these are the only ways to get into flash mode?
is it possible that my custom operator rom is blocking it in any way?