Today, I tried to unlock my Xperia Neo V's bootloader through S1Tool. As what I have surfed from the net, S1tool could be used to unlock Xperia Neo V's bootloader, right?
After the process, it seems to be unlocked.
Here is my log of S1Tool
6/2/2012 19:53:49 Welcome to S1 tool.
6/2/2012 19:53:49 That is small and crippled subset of SETOOL2 service tool.
6/2/2012 19:53:59
6/2/2012 19:53:59 DETACH USB CABLE FROM PHONE
6/2/2012 19:53:59 REMOVE BATTERY FROM PHONE
6/2/2012 19:53:59 ATTACH TESTPOINT
6/2/2012 19:53:59 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
6/2/2012 19:53:59
6/2/2012 19:55:07 PROCESSING ...
6/2/2012 19:55:08 REMOVE TESTPOINT NOW, THEN PRESS "READY"
6/2/2012 19:55:08
6/2/2012 19:55:14
6/2/2012 19:55:14 TO CONNECT NEXT PHONES
6/2/2012 19:55:14 X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
6/2/2012 19:55:14 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
6/2/2012 19:55:14 PRESS AND HOLD "BACK" BUTTON...
6/2/2012 19:55:14
6/2/2012 19:55:14 ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
6/2/2012 19:55:14 PRESS AND HOLD "Volume Down" BUTTON...
6/2/2012 19:55:14
6/2/2012 19:55:14 PLEASE ATTACH TURNED OFF PHONE NOW
6/2/2012 19:55:14
6/2/2012 19:55:22
6/2/2012 19:55:22 RUNNING S1_LOADER VER "R4A062"
6/2/2012 19:55:22 LOADER AID: 0001
6/2/2012 19:55:23 FLASH ID: "002C/00B3"
6/2/2012 19:55:23 LOADER VERSION: "r4A069"
6/2/2012 19:55:23
6/2/2012 19:55:23
6/2/2012 19:55:23 SEMC SIMLOCK CERTIFICATE, PROCEEDING
6/2/2012 19:55:23 FINISHED
6/2/2012 19:55:23 Elapsed:84 secs.
Click to expand...
Click to collapse
Yet, when I tried to install custom kernel by entering fastboot mode...
I followed the instruction.. However, when I type in "fastboot boot boot.img"
Only "<waiting for device>" was get and nothing was going to be continued
Therefore, I would like to ask..
1. Does my phone's bootloader really unlocked?
2. Anything wrong in my process to install custom kernel?
Please help! Many Thanks..
* Sorry for my poor English... I am japanese..
May be my question is silly, yet I couldn't find its' answer throughout the night
It looks like it worked.. What does s1tool say when you use the identify button? On the loader and simlock number it should have a small "r" instead of a big "R"
Also check your connecting the phone in fastboot mode (blue led)
Hope that helps.
Kiwi
Sent from my MT15i using xda premium
kiwiBratwurst said:
It looks like it worked.. What does s1tool say when you use the identify button? On the loader and simlock number it should have a small "r" instead of a big "R"
Also check your connecting the phone in fastboot mode (blue led)
Hope that helps.
Kiwi
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
Sorry for my silly question.. how can I use the identify button? should it in be connected with test point? When I connected my phone, I press the button. Nothing happen.
in the fastboot mode, i try to use command, "fastboot devices". nothing has been shown. Is that an error there?
Thanks.
yuuhaduki said:
Sorry for my silly question.. how can I use the identify button? should it in be connected with test point? When I connected my phone, I press the button. Nothing happen.
in the fastboot mode, i try to use command, "fastboot devices". nothing has been shown. Is that an error there?
Thanks.
Click to expand...
Click to collapse
S1tool should tell you how to connect your phone to identify, just press the identify button (in S1tool) and see what it says (you need your battery in and no test point required for "identify")
Kiwi
Sent from my MT15i using xda premium
yuuhaduki said:
Today, I tried to unlock my Xperia Neo V's bootloader through S1Tool. As what I have surfed from the net, S1tool could be used to unlock Xperia Neo V's bootloader, right?
After the process, it seems to be unlocked.
Here is my log of S1Tool
Yet, when I tried to install custom kernel by entering fastboot mode...
I followed the instruction.. However, when I type in "fastboot boot boot.img"
Only "<waiting for device>" was get and nothing was going to be continued
Therefore, I would like to ask..
1. Does my phone's bootloader really unlocked?
2. Anything wrong in my process to install custom kernel?
Please help! Many Thanks..
* Sorry for my poor English... I am japanese..
May be my question is silly, yet I couldn't find its' answer throughout the night
Click to expand...
Click to collapse
It seems like it worked, have you installed the fastboot drivers on your pc?
Also have you tried turning off your phone, press and hold the menu button and pluging your phone back into the pc to see if the led goes blue ?
finally , I got the solution, thanks del1701 and kiwiBratwurst's kindly help
yuuhaduki said:
finally , I got the solution, thanks del1701 and kiwiBratwurst's kindly help
Click to expand...
Click to collapse
Glad you got it sorted, happy flashing
yuuhaduki said:
finally , I got the solution, thanks del1701 and kiwiBratwurst's kindly help
Click to expand...
Click to collapse
I have de same problem, how do you solved it?
kurkoz said:
I have de same problem, how do you solved it?
Click to expand...
Click to collapse
Have you checked this?
del1701 said:
have you installed the fastboot drivers on your pc?
Also have you tried turning off your phone, press and hold the menu button and pluging your phone back into the pc to see if the led goes blue ?
Click to expand...
Click to collapse
Related
Hello everyone. My Phone is sony ericsson live with walkman.
The only option I can use to unlock my bootloader is using the test point method, because in the service info of my phone, it says that bootloader unlock allowed no.
I can't manage to unlock my bootloader using the test point method. I already have found the test point of my device. Connected it to the ground then connected it the Computer. It found the new device but the drivers are nowhere to be found. It looks for "QSHUSB DLOAD" drivers for the phone. It searched the windows update but it cant find one.
Another problem is, I dont know why i can't download the s1 tool here. Can anybody give me a direct link that is working. I searched the net for the s1 tool but the drivers that are supposed to be inside the zip file is not included. This driver is the one I think I need for "QSHUSB DLOAD" driver.
And another thing also, the s1 tool cant detect my phone. I don't know why. But what I did is, open the s1 tool and click do the job or identify, then plug in the usb to phone, then press back on the phone and plug in the usb to the computer. Am I missing something here?
Please. Help Me. I would be very grateful if you can give me a direct download link for the s1 tool and if you can tell me what I have forgotten here. Thanks)
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): WT19i
SOFTWARE VERSION: 1250-5829_4.0.1.A.0.283
CUSTOM VERSION: 1255-0897_R3D
FILESYSTEM VERSION: WORLD-i_4.0.1.A.0.283
SERIAL NO: BX902MPN02
SEMC SIMLOCK CERTIFICATE
Elapsed:8 secs.
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FATAL ERROR [ SECURITY_CLASS, SIN_header_verification_failed ]
error while uploading HDR block
LOADER NOT STARTED
Elapsed:283 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): WT19i
SOFTWARE VERSION: 1250-5829_4.0.1.A.0.283
CUSTOM VERSION: 1255-0897_R3D
FILESYSTEM VERSION: WORLD-i_4.0.1.A.0.283
SERIAL NO: BX902MPN02
SEMC SIMLOCK CERTIFICATE
Elapsed:10 secs.
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
PROCEDURE STOPPED BY USER
Elapsed:110 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): WT19i
SOFTWARE VERSION: 1250-5829_4.0.1.A.0.283
CUSTOM VERSION: 1255-0897_R3D
FILESYSTEM VERSION: WORLD-i_4.0.1.A.0.283
SERIAL NO: BX902MPN02
SEMC SIMLOCK CERTIFICATE
Elapsed:23 secs.
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FATAL ERROR [ SECURITY_CLASS, SIN_header_verification_failed ]
error while uploading HDR block
LOADER NOT STARTED
Elapsed:144 secs.
I have managed to do it. But there is an error please help me.
Hi man! Can you please Re-Upload that tool! OMG! I was looking at that So many time! PLEASE RE-UPLOAD!
Ill upload it later dude. I just wanna know first what caused the error here.
If ive read other posts wright i think you have to sim unlock your phone before any unlock bootloader methods will work as i tried to do the same thing and had this problem. Hope this helps
Sent from my WT19i using xda premium
pedrorubster said:
Hi man! Can you please Re-Upload that tool! OMG! I was looking at that So many time! PLEASE RE-UPLOAD!
Click to expand...
Click to collapse
Use these links:
whalesplaho said:
my battery is flat now brov...... would i upload for yu but take tha download links:
http://www.wupload.com/file/2573511462/s1tool.zip
http://www.fileserve.com/file/Js7Q4ew/s1tool.zip
N.B:- yu can use http://tigerleech.com or http://rapid8.com so as to download as premium user!
Click to expand...
Click to collapse
Anyone who can help me?
I don't mind any disrespect here, but this thread is not for sharing the s1 tool link. I am very anxious whenever somebody replies to this thread, but I always become frustrated because of off-topic replies. Please reply if u can help me
Is your phone sim unlocked?
Sent from my WT19i using xda premium
bootloader unlock allowed no = use the paid s1tool not the free one
see this
http://support.setool.net/
u need to register
Djscarbo said:
Is your phone sim unlocked?
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Its not. I just want to unlock bootloader. Have you unlocked yours?
works like a charm! straggled a bit but really works
sorry posted in the wrong topic, but heres the link to S1tool
http://www.mirrorcreator.com/files/N7ZKIR9C/s1tool.7z_links
i got my sim unlocked with this tool, i used to received error when sim is inserted.
Hi, i have sk17i mini pro i am trying to unlock bootloader, my phone has network lock then i use the wotanserver to unlock network, that went ok, in the service menu the bootloader option is allowed:yes, then i try to use the s1tool software to unlock bootloader but is always saying UNKNOWN SEMC SIMLOCK CERTIFICATE. don't know if the bootloader is looked or not. Is there a way to test without damage the phone. I think the message is throw because the network has unlock by wotanserver and not by SEtool.
I am going to try to post the log information of the s1tool for further assistance.
Regards, Diogo.
Try using s1tool few times. In my case 3 times with your error but in the end you should get log file looking like this:
17.2.2012. 0:58:45 Welcome to S1 tool.
17.2.2012. 0:58:45 That is small and crippled subset of SETOOL2 service tool.
17.2.2012. 1:00:34
17.2.2012. 1:00:34 DETACH USB CABLE FROM PHONE
17.2.2012. 1:00:34 REMOVE BATTERY FROM PHONE
17.2.2012. 1:00:34 ATTACH TESTPOINT
17.2.2012. 1:00:34 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
17.2.2012. 1:00:34
17.2.2012. 1:01:13 PROCESSING ...
17.2.2012. 1:01:14 REMOVE TESTPOINT NOW, THEN PRESS "READY"
17.2.2012. 1:01:14
17.2.2012. 1:01:29
17.2.2012. 1:01:29 TO CONNECT NEXT PHONES
17.2.2012. 1:01:29 X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
17.2.2012. 1:01:29 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
17.2.2012. 1:01:29 PRESS AND HOLD "BACK" BUTTON...
17.2.2012. 1:01:29
17.2.2012. 1:01:30 ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
17.2.2012. 1:01:30 PRESS AND HOLD "Volume Down" BUTTON...
17.2.2012. 1:01:30
17.2.2012. 1:01:30 PLEASE ATTACH TURNED OFF PHONE NOW
17.2.2012. 1:01:30
17.2.2012. 1:01:30
17.2.2012. 1:01:30 RUNNING S1_LOADER VER "R4A062"
17.2.2012. 1:01:30 LOADER AID: 0001
17.2.2012. 1:01:32 FLASH ID: "00EC/00B3"
17.2.2012. 1:01:32 LOADER VERSION: "r4A069" if you get here small r then you unlocked you're bootloader via test point
17.2.2012. 1:01:32
17.2.2012. 1:01:32
17.2.2012. 1:01:32 SEMC SIMLOCK CERTIFICATE, PROCEEDING
17.2.2012. 1:01:33 FINISHED
17.2.2012. 1:01:33 Elapsed:58 secs.
Hi, this is my log:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:178 secs.
thanks for the help
Dude, your phone has bootloader already unlocked.. when u use services like wotanserver or fast gsm to sim unlock, if the method used is testpoint, it will unlock bootloader too..
Sorry for my bad english..
Sent from my WT19i using xda premium
Obrigado Luis.
Thanks.
Regards, Diogo.
@DsB_79: so does X Unlock Tool from wotan server require test point when SIM unlocking?
Hm, actually, by looking at your log, is it possible that you manage to unlock your BL via test point and s1tool, and that you got that "error:NOT RECOGNIZED SIMLOCK CERTIFICATE" after s1tool is done with his magic?
Madfysh said:
@DsB_79: so does X Unlock Tool from wotan server require test point when SIM unlocking?
Click to expand...
Click to collapse
To unlock the Xperia line 2011, you need to change something on trim area, and to edit TA, bootloader needs to be unlocked.. That's why, when you unlock your phone by cable, it unlocks your phone bootloader too..
Sent from my WT19i using XDA App
LuisDias said:
To unlock the Xperia line 2011, you need to change something on trim area, and to edit TA, bootloader needs to be unlocked.. That's why, when you unlock your phone by cable, it unlocks your phone bootloader too..
Click to expand...
Click to collapse
So why people who unlock their phones with wotanserver, still need to unlock bootloaders?
Just to understand, I don't need that , I already have unlocked bootloader and unlocked phone. Just trying to understand how wotanserver works, so I can point people in right direction.
On wotanserver page I didn't find info about bootloaders, so I think they only remove SIM lock and by that they enable fastboot. But you still need to unlock BL with official or unofficial(s1tool OR setool) method.
What you think?
I can confirm that wotanserver unlooks the bootloader because i made a mistake i have upgrade the firmware to .62 via OTA and the phone stop working(no boot into the system only green light flashing ), so i assume that the wotanserver have unlock the bootloader.
Now the phone is fine i have manage to repair.
followed the thread , unlock without loosing drm data
used test point method, s1tool
did every thing .. yet not able to unlock bootloader
i get stuck at 'ATTACH YOUR TURNED OFF PHONE NOW'
My phone is sony xperia ray 2.3.4 build number 4.0.2.A.0.62.
its a generic handset
any help highly appreciated
You should have posted this question in the retrospective thread and not in dev section, but while you are here. Did you do what it said and connect your turned off phone? You didnt say! I suggest you read the how to unlock bootloader thread fully and then try again following the guide step by step and fyi if your phone is sim locked to a network provider then you won't be able to unlock the bootloader until the sim lock is removed. All the info and answers you need are within this forum so use the search button
Sent from my Xperia ray using xda premium
thank you for the reply.. n sorry for posting in wrong section
i unlocked the bootloader later that night..
downloaded n installed flashtool and the gordon gates driver, then s1tool was worked..
s1tool log:
20-06-2012 01:07:32 Welcome to S1 tool.
20-06-2012 01:07:32 That is small and crippled subset of SETOOL2 service tool.
20-06-2012 01:08:02
20-06-2012 01:08:02 DETACH USB CABLE FROM PHONE
20-06-2012 01:08:02 REMOVE BATTERY FROM PHONE
20-06-2012 01:08:02 ATTACH TESTPOINT
20-06-2012 01:08:02 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
20-06-2012 01:08:02
20-06-2012 01:08:29 PROCESSING ...
20-06-2012 01:08:30 REMOVE TESTPOINT NOW, THEN PRESS "READY"
20-06-2012 01:08:30
20-06-2012 01:08:35
20-06-2012 01:08:35 TO CONNECT NEXT PHONES
20-06-2012 01:08:35 X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
20-06-2012 01:08:35 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
20-06-2012 01:08:35 PRESS AND HOLD "BACK" BUTTON...
20-06-2012 01:08:35
20-06-2012 01:08:35 ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
20-06-2012 01:08:35 PRESS AND HOLD "Volume Down" BUTTON...
20-06-2012 01:08:35
20-06-2012 01:08:35 PLEASE ATTACH TURNED OFF PHONE NOW
20-06-2012 01:08:35
20-06-2012 01:08:37
20-06-2012 01:08:37 RUNNING S1_LOADER VER "R4A062"
20-06-2012 01:08:37 LOADER AID: 0001
20-06-2012 01:08:38 FLASH ID: "00EC/00B3"
20-06-2012 01:08:38 LOADER VERSION: "r4A069"
20-06-2012 01:08:38
20-06-2012 01:08:38
20-06-2012 01:08:38 SEMC SIMLOCK CERTIFICATE, PROCEEDING
20-06-2012 01:08:39 FINISHED
20-06-2012 01:08:39 Elapsed:36 secs.
thanks guys from xda
since this is development, can u advice some mods, stable roms etc.. for my xperia ray (now unlocked n rooted)
Thanks again
If you have more than 150apps ... then dont switch to ICS... but if you like Holo interface then flash FXP CM7 Rom and theme it .
MrTapa said:
If you have more than 150apps ... then dont switch to ICS... but if you like Holo interface then flash FXP CM7 Rom and theme it .
Click to expand...
Click to collapse
Okay, Thanks again..
can you also help me my bricked neo v...im from .238 and i upgrade to .62 from update center...when downloading is done..i press install then my phone goes black....i try it to on sometimes, it vibrates but phone does not boot,always black screen....i try and tried to on but it stopped on vibrating..my phone have no response at all i try to reflash a rom in flash tool but it does not work the still dont boot
PLEASE HELP ME... :crying:
-C2T- said:
can you also help me my bricked neo v...im from .238 and i upgrade to .62 from update center...when downloading is done..i press install then my phone goes black....i try it to on sometimes, it vibrates but phone does not boot,always black screen....i try and tried to on but it stopped on vibrating..my phone have no response at all i try to reflash a rom in flash tool but it does not work the still dont boot
PLEASE HELP ME... :crying:
Click to expand...
Click to collapse
Try to repair your phone via pc companion....should work after that
sujeesh.p7 said:
Try to repair your phone via pc companion....should work after that
Click to expand...
Click to collapse
pc companion cant search my phone....when searching it only says sony ericsson not xperia neo v...please help
Can you try with seus? or Wotan server?
jordiluna said:
Can you try with seus? or Wotan server?
Click to expand...
Click to collapse
i dont know how to use seus
-C2T- said:
i dont know how to use seus
Click to expand...
Click to collapse
Have you even tried it? What's possibly not to know in seus..
SEUS is Sony Ericson Update Service
Sent from my MT11i using xda premium
-C2T- said:
i dont know how to use seus
Click to expand...
Click to collapse
Download it and connect your phone. It´s easy, follow the steps.
ok I'm gonna give it a try...
pc companion cant detect my device.......it only says sony ericsson not xperia neo v....
but when i try to flash fw using flashtool its going connected then disconnected, then disconnected
having a hard time T_T
-C2T- said:
ok I'm gonna give it a try...
pc companion cant detect my device.......it only says sony ericsson not xperia neo v....
but when i try to flash fw using flashtool its going connected then disconnected, then disconnected
having a hard time T_T
Click to expand...
Click to collapse
It's ok if pc suite can't detect your phone....just select your phone's model in repair option and after completing the download just connect your phone holding the back button(after switching it off)
-C2T- said:
can you also help me my bricked neo v...im from .238 and i upgrade to .62 from update center...when downloading is done..i press install then my phone goes black....i try it to on sometimes, it vibrates but phone does not boot,always black screen....i try and tried to on but it stopped on vibrating..my phone have no response at all i try to reflash a rom in flash tool but it does not work the still dont boot
PLEASE HELP ME... :crying:
Click to expand...
Click to collapse
Is your bootloader unlocked? If so you must not update via the update center anymore! Heres a lick on how to fix it: http://forum.xda-developers.com/showthread.php?t=1598160
Good Luck!
seus and s1tool dont work....
seus - the phone contains modified software that cannot be updated.
s1tool - Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"
NOTHING TO RESTORE
Elapsed:9 secs.
T_T
-C2T- said:
seus and s1tool dont work....
seus - the phone contains modified software that cannot be updated.
s1tool - Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"
NOTHING TO RESTORE
Elapsed:9 secs.
T_T
Click to expand...
Click to collapse
Try connect ur phone in flash mode and flash .238 firmware again. Then download .62 fw and flash that to update
Sent from my MT11i using xda app-developers app
I consulted some technicians...they say that the only method to save my phone is to use JTAG...other one says reprogram...when im connecting it to pc the led indicator only show green not blue...the normal is blue when your using flashtool right????
:crying::silly:
-C2T- said:
when im connecting it to pc the led indicator only show green not blue...the normal is blue when your using flashtool right????
Click to expand...
Click to collapse
No, blue is for fastboot mode, green is for flashmode.
1) Have you ever unlocked your bootloader? I know you posted log from s1tool, but I don't know how s1tool shows officially unlocked BL's, hence why I ask.
2) Reinstall (latest) flashtool, and drivers from flashtool, since you said it connects/disconnects. Ideal would be to try on different PC.
3) Download this: http://forum.xda-developers.com/showthread.php?t=1126358
and use it. Report how it goes.
I consulted some technicians...they say that the only method to save my phone is to use JTAG...other one says reprogram...when im connecting it to pc the led indicator only show green not blue...the normal is blue when your using flashtool right????
:crying::silly:
Click to expand...
Click to collapse
Nah there are many people who managed to fix their phone without those methods. Yes green is for flash mode so continue with flashing ur original fw
Sent from my MT11i using xda app-developers app
Finally... Fixed!!!
Madfysh said:
No, blue is for fastboot mode, green is for flashmode.
1) Have you ever unlocked your bootloader? I know you posted log from s1tool, but I don't know how s1tool shows officially unlocked BL's, hence why I ask.
2) Reinstall (latest) flashtool, and drivers from flashtool, since you said it connects/disconnects. Ideal would be to try on different PC.
3) Download this: http://forum.xda-developers.com/showthread.php?t=1126358
and use it. Report how it goes.
Click to expand...
Click to collapse
I followed all the steps in this forum and my phone is fixed now i just flash the Play Ta Fix brick update zip...thank you for all your help...I'm so thankful that we have this kind of forum...So helpful TNX but my market is not updating to play store???
you had unlocked BL? officially?
Madfysh said:
you had unlocked BL? officially?
Click to expand...
Click to collapse
yes i had unlocked my bootloader officially...why??? Does it means that I'm not be able to update to play store anymore?
-C2T- said:
yes i had unlocked my bootloader officially...why???
Click to expand...
Click to collapse
Because you should have said that in the first place! Then you could have solved problem faster.
If you asking for help, try giving all info on your phone. We can't read minds.
Also, when someone asks you something, like I did, answer the questions, I didn't ask them for nothing, but to solve your problem.
Glad you solved it now.
-C2T- said:
Does it means that I'm not be able to update to play store anymore?
Click to expand...
Click to collapse
No. That's not related to unlocked BL.
I have Xperia Ray ST18i working on GB 2.3.4 4.0.1.a.0.283 I tried to flash it using flashtool to install arabic firmware but it dosnt run into flash mode ever , I root it using SuperOneClick and sucssed and install CWM using x-parts but when I turn on phone and press Vol - 2 or 3 times it freez in Sony Ericsson logo for loooong time since I remove battery , Finally I try to update it using OTA and after downloading files and restarting phone it dies and dosnt boot or charge or have any thing live , please help me to restore the phone
en.osama said:
I have Xperia Ray ST18i working on GB 2.3.4 4.0.1.a.0.283 I tried to flash it using flashtool to install arabic firmware but it dosnt run into flash mode ever , I root it using SuperOneClick and sucssed and install CWM using x-parts but when I turn on phone and press Vol - 2 or 3 times it freez in Sony Ericsson logo for loooong time since I remove battery , Finally I try to update it using OTA and after downloading files and restarting phone it dies and dosnt boot or charge or have any thing live , please help me to restore the phone
Click to expand...
Click to collapse
Did you tried to flash again the global ftf .587 by flashtool ( press and hold the volume down key while connecting to usb), if not woking in flashmode then check teh drivers on your pc ( go to the flashtool, help, drivers)
Bro the mobile dont enter flash mode ever , I try to flash Xperia Neo V using flashtool and it done ,
Sent from my MT11i using xda app-developers app
search for an unbricking guide in xda
RavinduSha said:
search for an unbricking guide in xda
Click to expand...
Click to collapse
I search very hard without result because all of the topics about unbricking told me to put mobile in the flash mode and I cant do that !!
Is there any instructions about TP and ground can help me ??
try this http://forum.xda-developers.com/showpost.php?p=22475166&postcount=4
There is step about boot my phone into flash mode and the mobile didnt enter it , I check driveres and it is existence
I try to unlock bootloader with s1tool and that what happened:
Code:
24/02/2013 06:30:10 م TO CONNECT NEXT PHONES
24/02/2013 06:30:10 م X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
24/02/2013 06:30:10 م LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
24/02/2013 06:30:10 م PRESS AND HOLD "BACK" BUTTON...
24/02/2013 06:30:10 م
24/02/2013 06:30:10 م ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
24/02/2013 06:30:10 م PRESS AND HOLD "Volume Down" BUTTON...
24/02/2013 06:30:10 م
24/02/2013 06:30:10 م PLEASE ATTACH TURNED OFF PHONE NOW
24/02/2013 06:30:10 م
24/02/2013 06:30:11 م
24/02/2013 06:30:11 م RUNNING S1_LOADER VER "R4A062"
24/02/2013 06:30:11 م LOADER AID: 0001
24/02/2013 06:30:12 م FLASH ID: "0098/00B3"
24/02/2013 06:30:12 م LOADER VERSION: "r4A069"
24/02/2013 06:30:12 م
24/02/2013 06:30:12 م
24/02/2013 06:30:12 م NOT RECOGNIZED SIMLOCK CERTIFICATE
24/02/2013 06:30:12 م MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
24/02/2013 06:30:12 م Elapsed:32 secs.
Can I use s1tool for restore my phone??
Sent from my
Mt11i using xda app-developers app
Try to use different usb port / change pc / make sure you are pressin the right combination of buttons.
Led light should be green while using flash tools.
Sent from my ST15i using xda app-developers app
Mysteryagr said:
Try to use different usb port / change pc / make sure you are pressin the right combination of buttons.
Led light should be green while using flash tools.
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
I try all these and still dont enter flash mode
where are experts?? I need help
en.osama said:
I try all these and still dont enter flash mode
where are experts?? I need help
Click to expand...
Click to collapse
Try this:
1. Pull battery off the phone
2. Wait 15 seconds
3. Insert battery
4. Hold volume down and while holding plug in the usb. Just volume down, not power or anything!
5. When the green led lights up, flash the unbricking .ftf and after that a generic stock firmware.ftf (for example .587)
Hope this works
Sent from my Nexus 7 running Android 4.2.2
All ways didnt work
mihahn said:
Try this:
1. Pull battery off the phone
2. Wait 15 seconds
3. Insert battery
4. Hold volume down and while holding plug in the usb. Just volume down, not power or anything!
5. When the green led lights up, flash the unbricking .ftf and after that a generic stock firmware.ftf (for example .587)
Hope this works
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
Bro I tried all of this ways and didnt work , it didnt enter flash mode ever
If you can't figure out the problem and fix it, send it to the repair center and let them do it for you.
Sent from my ST15i using xda app-developers app