I have a friend with a P7510 wifi edition tablet whose charge/data USB port only charges the tablet. It used to charge AND allow him to move data back and forth to PC or usb stick (with USB dongle) but ONLY charging works now.
Odin doesn't recognize the tablet, connecting it via usb to a computer plays the sound but the tablet is not recognized in windows at all. It is running stock TW. In addition, his tablet has on that broken version of firmware that Samsung pushed out several months ago that messed up screen rotation and Wifi. Booting to his stock recovery gives error so I can't even flash on another ROM.
Is there anyway to get him onto a new ROM and/or to fix his bootloader?
Thanks in advance for any help.
Are you sure you have the correct drivers install on your windows computer?
1000% sure the drivers are correct. I have even tried the tablet on my own PC since I've the P7510 as well. It also does not work with the usb dongle attachment and any usb device like you used to.
The linked picture is what I get when I boot into recovery mode.
Sent from my Galaxy Nexus using Tapatalk
Related
So the ota screwed up my phone. I was able to connect and intstall the stock eoh3 for xda the phone now starts up but I am unable to connect USB to root or flash any new rooms with Odin I can only connect Odin if the phone is booted up and debug and mock locations are on. If I pull the battery and put it in download mode it will not connect to the pc it just shows as an unknown device. I have reloaded drivers ect but not getting anywhere. Any ideas?
Try another cable if you have one, and try putting the drivers on another PC. For reasons I still haven't figured out, my home desktop PC quit connecting a couple of ROM's ago, and it won't even let me reinstall the drivers. I have a laptop that works fine (so I haven't gone into major troubleshooting) and my work PC also connects fine.
If the same issue repeats on other PC's and cables, there may be something wrong with your mini USB port. I had to have mine replaced a few months back.
Hi, first post here.. so Hi
I have an issue with my S3, i can't get my pc to detect it in download mode at all, no reaction from windows.. if didnt plug it in to the pc at all, it worked once, and it took me reinstalling drivers for hours to get it working, this is when i first rooted the phone using the cf-root method..
When i wanted to install a custom rom a few months ago i discovered it went back to not getting detected and has stayed that way
it's as if i've not connected it to the pc at all, i'm using a rear usb port, with the original cable, below is a short list of what i've tried
Tried 3 different cables
Used a brand new install of windows 7 with SP1
tried various Samsung ADB Drivers
Tried every single USB port, front and back on my pc
Used as many different USB Debugging options as possible
I noticed that when i turn on USB debugging after enabling developer mode, nothing changes on the pc, if i remember rightly my S2 made windows install the adb driver when i turned USB debugging on..
Any help is appreciated with this, never had any of this happen with my S2 lol :/ i've been messing around on and off the last few months with it, thankfully there's Mobile Odin and also Nandroid backups for me to fall back on
Pulling the battery with the cable plugged in while my S3 was in download mode is what fixed this for me...
With the usb cable plugged into the PC but NOT the phone, go into download mode.
Connect cable to the phone, then pull the battery out.
Once windows detects the phone and installs drivers it's safe to put the battery back in.
Phone will be detected by Odin/ CyanogenMod installer and so on.
Why in hell having the battery in stops windows detecting the phone in download mode is beyond me.. unless samsung did it on purpose? lol..
Installed CM 11 using the above method and it went perfectly, but i do have to use the above method whenever i want to flash something using my pc, so it's more of a work around than a fix..
Fix was found on YouTube of all places! hope this helps anyone else
Hi all,
I am in desperate need of ya'llz help! Recently I followed the following instructions to the dot:
http://forum.xda-developers.com/showthread.php?t=2703774
in order to get root on 10.4.1.B.0.109. I ended up, like the author of the thread, in the so called bootloop. Tried everything and eventually managed to get out and restored to root 4.1.2. Thats where I am now.
The tablet works fine, however i am unable to connect to my pc with USB and also unable to charge via the charger. The tab is not detected in my computer, nor PC companion. Mass storage mode nor media mode work. I tried swapping cables, same.
The only thing I am able to get working through USB is charging when the tab is powered off, which means that the USB port is not broken.
I was thinking that updating would fix the problem, so I tried updating directly from the System update in the tab. It downloads 109, then restarts to install it, comes back with: "Could not install"!
Now my tab is not detected on my PC when its on, what to do ? How to update/Fix the USB problem!?
Any help is greatly appreciated!
Update
Ok I realized that the plugged cable only makes the red LED on the left light up, and when i click the power button, I see the battery picture in the display. Showing half charged. But the actual charge is not increasing.
Unplugging the USB, turns off the LED!
Help!
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
put your sd card in an adapter, put that in your pc and copy a zip with a full rom on it, put it back in your tablet and install the rom? Or try a different usb cable, maybe it's broken
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
hold power + Vol+ to reset device and after that try to connect to pc to flash in flashtool.
Thanx
Hi guys,
thanks for the replies. Ive tried those already. Ive tried all different types of roms. The problem is that you need a restore image such as dual recovery on the tablet. Its rooted but there is not way to install a recovery image on it, without using a computer. And since it wont connect to the PC, no way..
:/
Hi, long time ago i think i installed a wrong kernel on my phone and since then my phone stucked in recovery opening animation, however even tho i tried to fix it through Odin my PC doesnt recognize my phone like it used to, I sended the phone to an expert at a local store to replace my usb port (cuz i though that's the case it couldnt even charge or connect to the PC) and he DID manage to charge my phone after changing my USb port, however when i came home and tried to connect it to my PC, it wouldnt connect or charge either and i used over 4 cables wich all of the seem to work with my other phone, HELP i dont know what to do
Hello,
I'm the owner of a galaxy A5 2016 (a510f), and I've been recently messing with custom roms (as we all do here). And yesterday I added several files to my phone using my pc, and as I was flashing a rom, this one failed.
No problem, just get back to TWRP and transfer from my pc my recent Backup, but no! My phone just won't connect to the pc, but still charges... tried transfer the backup using OTG with an USB stick, my phone still doesn't recognize
any USB connection. Tried reseting TWRP and check if MTP was enabled and it was, but still same issue. I was forced to recover an old backup I had on my phone for quiet a long time. But maybe it would work if I tried to transfer once
booted in android... Nope still not working, despite having USB debugging and MTP enabled. You have to admit this is very strange that I cannot even connect it via TWRP or download mode...
I'm really starting to suspect a Hardware issue... but that was so sudden... I also tried several USB cable, still not working but still charging.
I really need help, this is really annoying, I can't transfer anything using USB cable now, and can only use wireless transfer.