Related
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
As title. Very strange, just stopped working
I've tried setting it to vibrate only and resetting it, no joy.
Now i believe i had this problem ages ago when i installed something, i can't remember for the life of me what it was though. And whatever it was i got round it and i have been usuing the phone without installing or changing anything for months. So it is very strange that it should suddenly stop working.
Any ideas?
I'm sure a hard reset will bring it back but i really haven't got the time or patience to start doing all my settings again and installing all my cabs
Actualy, the tweak that stopped the vibrate working i got rid of and haven't used since. So this is completely random. It doesn't vibrate for sms, ring or even when you switch the phone on
Perhaps the vibrate is actualy broken, i guess i wont know until i do a complete reset.. unless anyone has any other ideas?
Did a search for this but can't see any threads about it
Hey
The same thing happened to me today , Just wanted to know what happened to ur phone, could u fix it ?
farshadfarshad2009 said:
Hey
The same thing happened to me today , Just wanted to know what happened to ur phone, could u fix it ?
Click to expand...
Click to collapse
I hard reset the phone and it came back... BUT it still wont vibrate on txt messages
I have the same problem now smsLED still flashes but no vibrate!!! The vibrate still works on other things just not sms. really wish i knew what is going on!!!
vibro lost , after install AllLEDMgr0.cab for disable orange led
Hi,
I've been installing and testing various ROMs for my T-Mobile Leo (HD2) before and never had any problems until now. Problem is, after the last flash, I noticed the phone doesn't vibrate any more, I've checked all the settings and even turned vibrate on/off, nothing helps. Also, if I long press the end key to shutdown the phone, it freezes, I then have to press end to lock, wait about 30 seconds then unlock to be able to use again. Important to note, when the phone freezes, only the touch screen freezes, the buttons continue to work, and I can even call the last party or answer/end calls.
I flashed some older firmwares that I used to use that used to work, but these problems still persist.
Is there any way I can diagnose the phone hardware completely? Any program or tool? I live in Guyana, South America so taking it to a repair centre is not an option, basically, I have to fix it myself.
Did I post this in the wrong thread/forum? Why and I not getting any help?
I'm still having this problem and need help! Somebody... any suggestions???
Notorious_PDR said:
I'm still having this problem and need help! Somebody... any suggestions???
Click to expand...
Click to collapse
Mate, honestly, I never notice that it would vibrate on long pressing
As long as your phone is working, then you shouldnt worry about it.
Or else, you can try to restore to original stock rom and see if this is due to hardware problem or software problem
I don't mean that it vibrates on long press. I said that it has stopped vibrating AT ALL!
In addition to that, the phone freezes alot, especially when I long press the end key. It is behaving like a hardware problem, that's why I'm asking about diagnostics for the HD2.
I dont think its anything to do with the rom. I had the same problem with mine, what happens is the flash lens gets pushed inside and stops the vibrator from rotating. Just check the lens if u see it pressed, its an easy fix if u know how to take the phone apart. For instruction check out youtube. I hope this helps.
silverwind said:
Mate, honestly, I never notice that it would vibrate on long pressing
As long as your phone is working, then you shouldnt worry about it.
Or else, you can try to restore to original stock rom and see if this is due to hardware problem or software problem
Click to expand...
Click to collapse
You should probably read back my post... I said the phone stop vibrating... not that it stop vibrating on long end press... It also freezes when I long end press... Hence, the reason I asked for any diagnostics for the HD2 as I suspect it may be hardware related...
gurkhali1 said:
I dont think its anything to do with the rom. I had the same problem with mine, what happens is the flash lens gets pushed inside and stops the vibrator from rotating. Just check the lens if u see it pressed, its an easy fix if u know how to take the phone apart. For instruction check out youtube. I hope this helps.
Click to expand...
Click to collapse
This actually seems to be the problem, I will open the phone and check... Thank you so much for your suggestion, I followed this suggestion, and now the touch screen is not working... but the phone is vibrating again. Any ideas what I will have to change now?
I'm currently having this issue and it's really frustrating, I had it first on the Galaxy S3 with 4.2.1 stock rom, I don't know if it might be an app that might be causing this, basically when i lock the phone the screen turns off but then when i press the power button or the home button to turn on the screen it does not do anything, I know the phone is still on because sometimes if i get a text message i can see the blue led blinking and it will continue to blink even when it's frozen.
The only way to bring it back is by holding the power and home button together in order to reset it.
I tried factory reset and it would not work, I flashed the phone with a custom rom for Paranoid Android 4.3 and it worked great for about a week, no issues at all, but then it started freezing when locked again. I hate this and i'm thinking it might be a hardware issue since I've tried different software versions.
I don't know if it might be an app that might be causing this, basically when i lock the phone the screen turns of but then when i press the power button or the home button to turn on the screen it does not do anything, I know the phone is still on because sometimes if i get a text message i can see the blue led blinking and it will continue to blink even when it's frozen.
Even worst, if i'm listening to music and i lock the phone or if the screen times out and locks when i try to unlock it i can see it's stuck but the music is still playing....
Also, if the phone is stuck and i try to call it, it will not ring not turn the screen on, it's not like the problem is just the physical buttons, i don't know what to do since the phone is out of warranty, I have never dropped the phone and there is no damage on it, it have never over heat either so i don't know what can i do.....
Any suggestions or help would be really appreciated.
hardware issue.I got same problem before but I didn't manage to fix it.
cz4r3n said:
hardware issue.I got same problem before but I didn't manage to fix it.
Click to expand...
Click to collapse
Thank you for the reply, do you know specifically what kind of hardware problem was it? Were you able to fix it or you just had it replaced?
no not yet sorry...
cz4r3n said:
no not yet sorry...
Click to expand...
Click to collapse
But it's really strange, It is a hardware issue and it should affect all the time, not randomly i would think... I don't know if the problem is with the processor or the buttons, i don't know how to determine that..
Jonhmena said:
But it's really strange, It is a hardware issue and it should affect all the time, not randomly i would think... I don't know if the problem is with the processor or the buttons, i don't know how to determine that..
Click to expand...
Click to collapse
The first week with Paranoid Android 4.3 it worked greatm even faster than the stock rom and I also liked it because it is android 4.3, the issue started one week after, and i'm thinking that during the first week i did not install all the apps i use, once i installed all the apps it started happening.
The first time i had the issue was right after the facebook messenger app was updated, i tried uninstalling it and the issue was still happening, if i check the running apps and i can see several of my apps running in the background such as Facebook messenger, Viber, Skype, Avast (6 services) Applock, GO weather EX, whatsapp, Facebook.
Maybe i'm just reluctant to think that this is a hardware issue, cause there is no way for me to get some logs or a hardware report that may show any crashes or anything.. I like this phone, it have everything i need and i refuse to think that it's a piece of crab but i've had nothing but troubles with it since day 1...
I dont think it is SW problem because even flashing multi package stock firmware doesn't fix the issue.I tried replacing lcd and display driver but still remain unsolved.
Edit:I think there is a defective sensor chip which I don't have a unit to test already.
hello, i have same issue, and stil stuck with it, anyone can help me?
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
jdommer said:
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
Click to expand...
Click to collapse
Mine vibrated yesterday and now it wont vibrate. If you scroll down from the top on your home screen, click the icon in the top right corner, that should bring up your wifi, airplane mode, gps, battery, etc icons. If you scroll down to audio profiles, there is one called meeting that has a picture of a phone vibrating. That should make calls and messages vibrate your phone. You can also manually turn them on because if you go to settings/device/audio profile/settings for general where you can select vibrate plus ring, and if you scroll down there is an option for vibrate on touch. Even though I have both these settings checked, and they used to work, they are no longer working. I tried a factory reset, and that didn't fix it. Now, when I power on my watch, I get a message that says headphones disconnected. It seemed to stop working after I started getting this message, not sure if that is normal or if it has anything to do with it. I will let you know if I figure out a way to get mine vibrating again, but for now it looks like mine could be broken. Can anyone else chime in on this if this has happened to you?
flimmyflam said:
Mine vibrated yesterday and now it wont vibrate. If you scroll down from the top on your home screen, click the icon in the top right corner, that should bring up your wifi, airplane mode, gps, battery, etc icons. If you scroll down to audio profiles, there is one called meeting that has a picture of a phone vibrating. That should make calls and messages vibrate your phone. You can also manually turn them on because if you go to settings/device/audio profile/settings for general where you can select vibrate plus ring, and if you scroll down there is an option for vibrate on touch. Even though I have both these settings checked, and they used to work, they are no longer working. I tried a factory reset, and that didn't fix it. Now, when I power on my watch, I get a message that says headphones disconnected. It seemed to stop working after I started getting this message, not sure if that is normal or if it has anything to do with it. I will let you know if I figure out a way to get mine vibrating again, but for now it looks like mine could be broken. Can anyone else chime in on this if this has happened to you?
Click to expand...
Click to collapse
I cannot get my vibrate to work again, if anyone has experienced this, please reply and let me know how to fix it, for now, i am giving up, and extremely disappointed
jdommer said:
This seems an overly obvious question. Does the watch have vibrate? I just got it two days ago, but no setting of vibrate anywhere seems to make it shake. I would think I'd have run across someone else saying something if it lacked the ability...
So, kinda wondering if mine is broken or if I totally missed that it isn't there.
Thanks
jd
Click to expand...
Click to collapse
It does vibrate. But very few things use that function it seems. I was thinking about setting up a tasker script to vibrate on any notification.
mortis2600 said:
It does vibrate. But very few things use that function it seems. I was thinking about setting up a tasker script to vibrate on any notification.
Click to expand...
Click to collapse
Anyone have any ideas on how to get mine vibrating again? I've done the backup and restore option, is that how you do a proper factory reset, or is there another way I can try to get this thing to start working again?
update: Just flashed 1900_20140120 firmware using the excellent guide on here, and still no vibrate
flimmyflam said:
Anyone have any ideas on how to get mine vibrating again? I've done the backup and restore option, is that how you do a proper factory reset, or is there another way I can try to get this thing to start working again?
update: Just flashed 1900_20140120 firmware using the excellent guide on here, and still no vibrate
Click to expand...
Click to collapse
Mine started working. Not sure why; I tried to reset to factory and despite following the directions and watching Loki's video, i managed to lock the watch up. Popped the battery, put it back together, wiped the device. Now it vibrates and that is good. Just wish i knew what I had did that fixed it.
Thanks all!
Jd
Mine does not vibrate either, never did.
I tried with the stock firmware, Loki's firmware, stock with enhanced security... no luck...
Thoughts?
jdommer said:
Mine started working. Not sure why; I tried to reset to factory and despite following the directions and watching Loki's video, i managed to lock the watch up. Popped the battery, put it back together, wiped the device. Now it vibrates and that is good. Just wish i knew what I had did that fixed it.
Thanks all!
Jd
Click to expand...
Click to collapse
stanelie said:
Mine does not vibrate either, never did.
I tried with the stock firmware, Loki's firmware, stock with enhanced security... no luck...
Thoughts?
Click to expand...
Click to collapse
Mine started vibrating again. I went to take the battery out, but couldn't get the screws off, so I gave up, when I rebooted, all the sudden vibrate worked again. Not sure if it was powering it on and off a few times, or shaking it around, try taking the battery out and putting it back in if you can, if not, just try turning it off and then on and maybe lightly shaking it around
Well,
It looks like a bad electrical contact, I've downloaded an app called "vibrater" that does just what it says, and it won't start the vibrator until I lightly tap the watch on it's side while the app is turning the vibrator on.
But it does not stick. I guess I will have to return the watch to have it fixed...
Until tonight, I thought the TrueSmart just didn't have a vibrator...
Vibration doesnt work
Hey, just received my Omate Trusmart! (Kickstarter edition)
Overall I am extremely happy with the watch, but there are a couple of major problems:
1. The vibration doesn't work, I have tried rebooting, factory restore etc but nothing seems to work. Does anyone know a fix to this or is it a hardware problem?
2. My screen has very faint dark spots in the center. Looks like a manufacturing defect.
Is it possible to return the watch to get a replacement? I havent opened the back cover yet.
Thanks.