[Q] xperia active, how to enable wifi channels 12-13? - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hi!
My xperia ST17i (active) can't connect on wifi channels 12-13, which are legal in my country. I use stock ROM 4.0.2.A.0.62 and Rage kernel 2.3.
I suppose, the reason is wrong regional regulatory settings. How can i fix it?
I've checked file /system/etc/tiwlan.ini. All channels are enabled there, even 14. I've tried to find solution and it seems, it was here, but the link is broken.
Is it an easier way, than flashing European or international ROM?

yeah, me too, need this, been searching...

fix
Sorry for reviving this old thread. Just in case you are still looking for the solution, this might help.

Related

[Q] No market after 2.1 update. Xperia X10i

I have updated my xperia x10i & after the update, I can't see the android market. Guys what should I do. I stay in India.
Did you do the official SE update or did you flash one of the other available updates (Nordic, global, etc)?
According to Google you should have Market on the phone unless SE hasn't included it.
Try repairing the installation, if that doesn't work you may need to flash another version of the update.
I have updated throught SE companion.... Also I tried repairing, done it twice still no market... What do I do??? Please help
Can I flash my X10i without rooting?
sog-1986 said:
Can I flash my X10i without rooting?
Click to expand...
Click to collapse
of course you can
I think it's a common problem in all of Asia (though maybe not Japan). China, Hong Kong and Taiwan all have this same problem with no fix or even a comment from Sony other than, "try reinstalling".
I'm still trying to find the global 2.1 so I can just flash that to my x10i.
Does no 1 have a solution for the same.... Bcoz I have tried everything officially.... I think only way now is to flash the phone with a global firmware.... Can any one help me to how to do so? (Off-course without rooting)
Like you nothing works for me. I grabbed the "vendor.apk" and also grabbed "MarketAccess" and "MarketEnabler" tryimg to get it to work. I can make the little picture for market show up, but nothing happens if I click it.
I'm afraid to global root my cell too cause it's been said without Timescape that many of the functions (like phonebook) won't work.
try to add the app from there http://forum.xda-developers.com/showthread.php?t=826849
well finally i have managed to install market.... If any 1 is facing the same problem, pls contact me. my email address is [email protected]. Or else grab a global firmware2.1 & flash it with x10i flash. These would solve all your problems
HI
I have the same problem that you are having, i am using slide me now, but i still need google market, i am not sure what to do.
if you have managed to solved your problem, please let me know how.
regards

[Q][request] x10 mini prototype fw

I know you saw a lot of questions about unlocking prototype versions of SE.
This is not that, my only problem is this:
I got X10mini SP2 build prototype. It had a small bug that proximity switch was always on.
I found its possible to fix it by flashing with prototype/debug fw.
but i could not find any for X10 mini.
So i will we very thankful if somebody have it?
Or maybe have idea how to fix it?
thanks
________________________________________
EDIT: fixed with UK firmware. Download

Overmax OV-TB-09B 10" tablet

Hi everybody! I am looking for helping answers related to my newly purchased 10" internet tablet Overmax OV-TB-09B with 1.2 GHZ Cortex CPU running Android ICS 4.03.
The tablet is great, but it doesn't offer 3G and Bluetooth conectivity by itself. Therefore I am looking for a suitable compatible 3G USB modem, as well as a Bluetooth USB dongle with the associate ddrivers.
Therefore please can someone give me some recommendations? Thank you!
axelTP2 said:
Hi everybody! I am looking for helping answers related to my newly purchased 10" internet tablet Overmax OV-TB-09B with 1.2 GHZ Cortex CPU running Android ICS 4.03.
The tablet is great, but it doesn't offer 3G and Bluetooth conectivity by itself. Therefore I am looking for a suitable compatible 3G USB modem, as well as a Bluetooth USB dongle with the associate ddrivers.
Therefore please can someone give me some recommendations? Thank you!
Click to expand...
Click to collapse
Anybody, please, any idea.......Thanks!
Still nobody?
hey
axelTP2 said:
Still nobody?
Click to expand...
Click to collapse
how is it? your tablet? i think the response for your problem is... you can buy a new phone with android os and you can turn tethering option on your phone and then your tablet see your phone as a hotspot wifi. Btw i saw that you are from Bucharest, im from Timisoara.
ozambaretzo said:
how is it? your tablet? i think the response for your problem is... you can buy a new phone with android os and you can turn tethering option on your phone and then your tablet see your phone as a hotspot wifi. Btw i saw that you are from Bucharest, im from Timisoara.
Click to expand...
Click to collapse
Thank you ozambaretzo, glad to hear that you are from Timisoara, very nice city with very nice people over there!
There is another more convenient work around consisting in using a 3G wifi modem (hot spot), I have tested it and it works. But I was looking for a true 3G USB modem that I find more conveneint for me.
Coming back to my initial question, I think I know now the right answer for it: it is not easily possible to use a 3G usb modem or usb buetooth dongle as long as the corresponding Android drivers are not incorporated in the kernel by the manufacturer.
Even more, in case somebody would like to cook its own ROM, the respective Android drivers are not available on the market at all.
Anyway, I am not at all familiar with Android, but I think I recall that I have installed printer drivers in Linux, I expect this to be similar in Android.
Why is it not possible to run an apk that is installing a driver in the OS as long as the tablet is rooted?
Could somebody please explain in general terms this problem with Android? Thank you!
I have an overmax ov-tb-09c tab and i can't identify its originial manufacturer... i tried all of the methods, what i know (very much google search, google translate, overmax support and still no answer
i need to know it, because i want to root it and flash cwm and (if possible) CM10...
i know, that overmax only rename chinese tablets, so i found only polish forums so far...
i can't root it, even if superuser.apk is pushed to system...
do anybody have idea?
fecooo said:
I have an overmax ov-tb-09c tab and i can't identify its originial manufacturer... i tried all of the methods, what i know (very much google search, google translate, overmax support and still no answer
i need to know it, because i want to root it and flash cwm and (if possible) CM10...
i know, that overmax only rename chinese tablets, so i found only polish forums so far...
i can't root it, even if superuser.apk is pushed to system...
do anybody have idea?
Click to expand...
Click to collapse
Indeed no idea on how to find the original manufacturer...
The tablet is sold on the market already rooted, you should run Root Checker Basic (freeware) on it and see if it becomes green....Superuser got installed all right on my tablet.
axelTP2 said:
Indeed no idea on how to find the original manufacturer...
The tablet is sold on the market already rooted, you should run Root Checker Basic (freeware) on it and see if it becomes green....Superuser got installed all right on my tablet.
Click to expand...
Click to collapse
Thank you for your answer!
I got this tablet with JB, and this software wasn't rooted, root checker basic was red... but i found the only way: zhuodashi
this program installed SuperSU on my tab and this method worked
fecooo said:
Thank you for your answer!
I got this tablet with JB, and this software wasn't rooted....
Click to expand...
Click to collapse
Hi fecooo! Very interesting this Overmax of yours with JB!!! Are you sure that it is the same model as in this thread, i.e. OV-TB-09B? I got mine with ICS 4.03 and so it was probably the whole imported batch. In which country did you buy this Overmax OV-TB-09B? Definitely I would be interested in getting the stock JB image that is loaded on your tablet! Any link you know available somewhere please?
Could you please post a picture of the screen showing your OS and kernel version? Or PM it to me, please.
fecooo said:
zhuodashi
Click to expand...
Click to collapse
Never heared of this "zhuodashi" program, it would be great to post a relevant link to it. Of course I can also google for it or do a search on this forum, but you know best what you are talking about.
Did this program also open-up your bootloader, any idea about that?
In my case, although the tablet was routed, the bootloader was blocked. In your case if the tablet was not rooted, than probably the bootloader is open, allowing you to install another ROM image, stock or customized, as you please.
Looking forward for your answers and then I will ask you about modems.
axelTP2 said:
Hi fecooo! Very interesting this Overmax of yours with JB!!! Are you sure that it is the same model as in this thread, i.e. OV-TB-09B? I got mine with ICS 4.03 and so it was probably the whole imported batch. In which country did you buy this Overmax OV-TB-09B? Definitely I would be interested in getting the stock JB image that is loaded on your tablet! Any link you know available somewhere please?
Could you please post a picture of the screen showing your OS and kernel version? Or PM it to me, please.
Never heared of this "zhuodashi" program, it would be great to post a relevant link to it. Of course I can also google for it or do a search on this forum, but you know best what you are talking about.
Did this program also open-up your bootloader, any idea about that?
In my case, although the tablet was routed, the bootloader was blocked. In your case if the tablet was not rooted, than probably the bootloader is open, allowing you to install another ROM image, stock or customized, as you please.
Looking forward for your answers and then I will ask you about modems.
Click to expand...
Click to collapse
i'm hungarian and i bought in auchan
zhuodashi is only in chinese language, the only word what i can read, root (in english)
this program installs on your phone 2 apps, maybe spy, but i don't know... i only know that this method rooted my tab!
i don't know, how can i see if my tablet has open or locked BL.
i have a globetrotter hsxpa 3g modem (t-mobile, old...) and no luck, didnt recognised... (so i'm afraid i can't help you about modems...)
ZhuoDaShi-2.2.9-setup
this version, what I downloaded...
i don't know all abilities of the app, but really useful can be with a well-known (LG,samsung, etc...) android device! (custom roms, etc...)
stock image of this rom can be dl-ed from overmax.pl (but be careful, i don't know the difference between the two versions... except the accumulator, my tab has 4000mA)
fecooo said:
i'm hungarian and i bought in auchan
zhuodashi is only in chinese language, the only word what i can read, root (in english)
this program installs on your phone 2 apps, maybe spy, but i don't know... i only know that this method rooted my tab!
i don't know, how can i see if my tablet has open or locked BL.
i have a globetrotter hsxpa 3g modem (t-mobile, old...) and no luck, didnt recognised... (so i'm afraid i can't help you about modems...)
ZhuoDaShi-2.2.9-setup
this version, what I downloaded...
i don't know all abilities of the app, but really useful can be with a well-known (LG,samsung, etc...) android device! (custom roms, etc...)
stock image of this rom can be dl-ed from overmax.pl (but be careful, i don't know the difference between the two versions... except the accumulator, my tab has 4000mA)
Click to expand...
Click to collapse
Great, thank you for the answer.
For making almpst any modem run on the tablet you need to install PPP Widget application from the Google play market, but I have no idea if it runs with JB4.1. It does OK on the ICS4.03.
On your picture it looks like (I can't read it well on that picture) your model of Overmax is OV-TB-09C, correct? Does it have a rear video camera? I know from a Romanian forum that somebody has installed this C-model software on a B-model tablet and the rear camera doens't work, but the rest is OK.
On the B-model the battery is claimed to be of 6000mAh, but I don't know if this is true.
The B-model has no Bluetooth, how about your C-model?
axelTP2 said:
Great, thank you for the answer.
For making almpst any modem run on the tablet you need to install PPP Widget application from the Google play market, but I have no idea if it runs with JB4.1. It does OK on the ICS4.03.
On your picture it looks like (I can't read it well on that picture) your model of Overmax is OV-TB-09C, correct? Does it have a rear video camera? I know from a Romanian forum that somebody has installed this C-model software on a B-model tablet and the rear camera doens't work, but the rest is OK.
On the B-model the battery is claimed to be of 6000mAh, but I don't know if this is true.
The B-model has no Bluetooth, how about your C-model?
Click to expand...
Click to collapse
yes, i have tb-09c with rear camera and no bluetooth.
btw i can't use ppp widget
I connect the modem, the widget recognise it and i can push on connect and always disconnect...
"using port ttyUSB0 for connection
connect script failed" in log... no other and google couldn't help me
can you?
fecooo said:
yes, i have tb-09c with rear camera and no bluetooth.
btw i can't use ppp widget
I connect the modem, the widget recognise it and i can push on connect and always disconnect...
"using port ttyUSB0 for connection
connect script failed" in log... no other and google couldn't help me
can you?
Click to expand...
Click to collapse
After connecting the modem, give him like 20-30 sec to be recognized, then click in the middle of the ppp widget icon and a drop down window will open where you have to see the name of your modem and select it. Then you need to click on the Configure button just below the ppp widget icon and a specific confiration window will open up. Fill in the specific APN info of your provider, but take care where it says Access Point Name on the first line write the APN info (eg internet.vodafone.ro) and not the conventional name of the APN (e.g. Vodafone).
Good luck with it!
Please let us know the news on your progress!
fecooo said:
I have an overmax ov-tb-09c tab and i can't identify its originial manufacturer... i tried all of the methods, what i know (very much google search, google translate, overmax support and still no answer
Click to expand...
Click to collapse
About identifying the original manufacturer, I recall that I have once installed a while ago the wifi application called WiFi Key Recovery (free on the Google play), which was showing on the top line the type of my tablet:
Device: crane_a1002jhakai crane-a1002jhakai
Unfortunately, still I wasn't able to identify the true Chinese manufacturer.
You might want to try this on your tablet and share with us your findings.....
axelTP2 said:
About identifying the original manufacturer, I recall that I have once installed a while ago the wifi application called WiFi Key Recovery (free on the Google play), which was showing on the top line the type of my tablet:
Device: crane_a1002jhakai crane-a1002jhakai
Unfortunately, still I wasn't able to identify the true Chinese manufacturer.
You might want to try this on your tablet and share with us your findings.....
Click to expand...
Click to collapse
thanks, i found these information too (in build.prop), and a similar (or counterfeit...) turkish tablet, named Piranha Business Tab, but i can't find new informations, only a turkish program on the official website to flash updates, but i didn't try it...
fecooo said:
thanks, i found these information too (in build.prop), and a similar (or counterfeit...) turkish tablet, named Piranha Business Tab, but i can't find new informations, only a turkish program on the official website to flash updates, but i didn't try it...
Click to expand...
Click to collapse
Hi fecooo, any progress in your endeavour to identify the original manufacturer?
I have been flashing the C-model software on my B-tablet and it's installing JB4.1.1. Unfortunately there are some differences: the rear camera is not working (wrong driver?) showing just stripes all over the picture, the task manager is missing completely and most of all the tablet is not rooted any more. Not that I couldn't root it thanks to your tip with zhuodashi, but I've reverted back to the original ICS 4.03, it's not that bad.
I am looking forward for a new release of Overmax, but in the past week they have removed any download from their website, I guess that they are preparing new software for upload. We'll see what will be coming up......Maybe also a hint towards the original manufacturer.....
axelTP2 said:
Hi fecooo, any progress in your endeavour to identify the original manufacturer?
I have been flashing the C-model software on my B-tablet and it's installing JB4.1.1. Unfortunately there are some differences: the rear camera is not working (wrong driver?) showing just stripes all over the picture, the task manager is missing completely and most of all the tablet is not rooted any more. Not that I couldn't root it thanks to your tip with zhuodashi, but I've reverted back to the original ICS 4.03, it's not that bad.
I am looking forward for a new release of Overmax, but in the past week they have removed any download from their website, I guess that they are preparing new software for upload. We'll see what will be coming up......Maybe also a hint towards the original manufacturer.....
Click to expand...
Click to collapse
hi!
sorry for the late answer :S
i give up, i cant identify :S
yes, i saw that they removed the updates, and uploaded some "new" versions... (these are the same from 18.12.2012 -.-' )
now i use JB with stable options, the only problem what i wanted to solve, the incompatibility in play store, but still no success
I tried "Allwinner mod" from play store, this change build.prop but i still can't install a single angry birds from store... annoying that we need to download almost everything from external source...
Have you tried to change build.prop to see more apps in play store?
fecooo said:
hi!
how i use JB with stable options, the only problem what i wanted to solve, the incompatibility in play store, but still no success
I tried "Allwinner mod" from play store, this change build.prop but i still can't install a single angry birds from store... annoying that we need to download almost everything from external source...
Have you tried to change build.prop to see more apps in play store?
Click to expand...
Click to collapse
Hi fecooo, soryy for my delay in answering you, I do not visit this site frequently.
As for my Overmax, it is running ICS 4.0.3, therefore I did not meet the problems that you are facing. But I did not know either about build.prop, so I will try to look into it one of these days...
Sorry for not being of much help.....

[Q] sk17i - help

hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
moly82 said:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
Click to expand...
Click to collapse
To change baseband, you only need Flashtool, proper FTF file (every firmware includes different baseband) and phone with USB cable.
No root, no need to unlock bootloader, no CWM, any ROM will do.
Which baseband(BB) are you currently using? Also, which ROM?
Someguyfromhell said:
To change baseband, you only need Flashtool, proper FTF file (every firmware includes different baseband) and phone with USB cable.
No root, no need to unlock bootloader, no CWM, any ROM will do.
Which baseband(BB) are you currently using? Also, which ROM?
Click to expand...
Click to collapse
thanks for the reply!
good to hear.. seems I can try different BB's pretty easily so
she's on stock ICS 4.0.4..
BB: 8x55a-aaabqoazm-203028g-77
FW: 4.1.B.0.587
if it was mine, I would have already rooted, unlocked it and tried FXP cm10.. I can't stand all those sh*tty apps included in stock roms.. but as I wrote it is not mine and if I brick it that would be a big problem..
(even if actually she is using it as it was a old phone as data connection is almost un-usable.. 3g status is always almost 0, and 2g can not be used because of operator problems.. : ( ) so she can only use it with WI-FI in the office and then no data connection anymore..
that's bad, I bought her that phone and if I knew before data connection signal was so bad I would have never bought it
you think I can improve the situation trying different BB? tx again!
I doubt it will help. I do not think changing baseband will make it any better.
Try the same SIM card in another phone(s). Does the issue still occur in other phone(s)? If yes, the issue is with either the SIM or the operator.
Then try another SIM card in the Mini Pro. Does the issue still occur with another SIM card in Mini Pro? If yes, then the issue lies in your phone.
I have already made tests, troubleshooting etc (I work in a service department :laugh: ) and I am sure the problem is on the phone that's why I would like to try a different BB as last hope.. if that won't work then I will trow it away and buy something else.. :crying:
bull****
moly82 said:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
Click to expand...
Click to collapse
changin BB won't change anything
prantoroy said:
changin BB won't change anything
Click to expand...
Click to collapse
wow.. that's not so good to hear.. so I've just wasted the money I spent for that sh*itty phone! ((( (everything else is good on it actually, but with that bad reception can't be used, simply..)

[Q] Flash back to 4.2.2 No Signal

Hi. I have a c6806 I bought from Sony Store and updated to 4.3. I downgraded back to 4.2.2 by flashing it with Flashtool. I downloaded the FTF file from the XDA forum. 14.1.B.1.532
After flashing it, I confirmed its now back to 4.2.2. However the problem is that I can no longer connect to AT&T. It doesn't have a signal. I don't know what to do. I looked under Mobile Networks and there is nothing listed under Access Point Names. Any info on what I need to do to get this to work again? Any info would be much appreciated. Thanks :good:
NVM sorry. after an hour of researching, I found out that I need to flash a newer rom and got my LTE connection back. If you downgrade back again, make sure you uncheck BANDS in Flashtool. In case someone else runs into this problem.
I'll just post this thread here in case anyone else stumbles across this thread with the same issue.
http://forum.xda-developers.com/showthread.php?t=2593918
I was having exactly the same problem and was able to fix that by flashing a newer ROM

Categories

Resources