Hi Iam running Alien4 2.3.4 rom with faux1234. Iam rooted and obviously bl is unlocked. But I had a question, I never really understanded the fruit cake thing. I just wanted to make sure I don't brick my phone. So I can flash the 2.3.4 fruitcake, over my current rom, and it would be safe to download the new and future OTA updates over wifi and install it? Thanks
Sent from my MB860 using xda premium
not just hell No hell Never!
After you root and unlock your supose to Forget about EVER useing the ota
its bad news man
ltdanno360 said:
its bad news man
Click to expand...
Click to collapse
I heard that Google kills a stripper every time someone with a custom ROM attempts to OTA update.
Sent from my MB860 using xda premium
Fruitcake replaces any OTA. Only update software via CWM now. No RSD, no nothing.
Sent from my MB860 using xda premium
Related
I think i might have been one of the dumb ones to do the .zip flash of the BETA #3 gingerbread update. I searched and noticed the only way to go back to 2.2 was to unlock 1st. the question is when the official moto 2.3.4 comes out will i be able to update to that version without any issues via OTA?
I know some maybe running soak versions which may prevent them from reverting back to 2.2 as well. So do you guys think moto or the devs will figure a way for those that didn't root/unlocked before doing the update.zip to start recieving OTAs?
If ur on kens beta going back to stock will work and stock is the way you'll get the ota until it comes out as an sbf to flash
Sent from my MB860 using XDA Premium App
TechnoNeto said:
If ur on kens beta going back to stock will work and stock is the way you'll get the ota until it comes out as an sbf to flash
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I'm not on kens. i did the update i believe before kens was available. is there a way to go through kens route since i'm already on the stock 2.3.4?
If you flashed the stock OTA that was leaked, you risk bricking when flashing back.
Moto's OTA is designed to prevent backwards flashing.
I believe they found a way through pudding look on kens roms thread and there should be a link on how ti do so if nit there go to the calling all hardbricks post and do the steps there to prevent bricking
Sent from my MB860 using XDA Premium App
TechnoNeto said:
I believe they found a way through pudding look on kens roms thread and there should be a link on how ti do so if nit there go to the calling all hardbricks post and do the steps there to prevent bricking
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
what if i just want to get the offcial ota when it is released. would i still be in luck or still need to unlock and root?
system version: 4.1.83 att us
baseband version 01.77.15p
android version 2.2.2
i bricked my old atrix trying to install gingerblur on it. since i don't want to mess up again, can someone please help me with this? i'm pretty noobish on android (wnt form iphone 4 to atrix) and don't want to mess up again
thanks!
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Javi97100 said:
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
fdotorres said:
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
Click to expand...
Click to collapse
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Javi97100 said:
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM
fdotorres said:
tenfar's CWM
Click to expand...
Click to collapse
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Are you sure that your old atrix is hardbricked? Sounds like it would be more of a softbrick unless your old atrix had Gingerbread. Eitherway, it sounds fixable.
Javi97100 said:
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i'm unable to root it for some reason. tried cmd method as well as superoneclick... don't know what else to do
If I wanted to go back to 2.3.3 where can I find those files. Or can i just flash the ruu for 2.3.3?
Sent from my PG86100 using XDA Premium App
??
Sent from my PG86100 using XDA Premium App
Depends, did you take the OTA or did you install a custom rom to get to 2.3.4. If you took the OTA and you weren't rooted before I don't know if you can go back. The HTC unlocker method of rooting will not let you install a kernel so I don't believe you will be able to flash a 2.3.3 rom since it will require an compatible kernel.
If your on 2.3.4 taking the ota then there is no way to go back to 2.3.3
Sent from my PG86100 using Tapatalk
cruise350 said:
Depends, did you take the OTA or did you install a custom rom to get to 2.3.4. If you took the OTA and you weren't rooted before I don't know if you can go back. The HTC unlocker method of rooting will not let you install a kernel so I don't believe you will be able to flash a 2.3.3 rom since it will require an compatible kernel.
Click to expand...
Click to collapse
I took the custom ROM method.
Sent from my PG86100 using XDA Premium App
Then u should be good to go. Just remember when you take the ruu method you will loose everything
Sent from my PG86100 using Tapatalk
Is it possible to flash a custom recovery with the locked bootloader? I'm used to HTC and am not to familiar with Motorola's Android
Sent from my MB855 using xda app-developers app
I have already successfully rooted, and attempted to flash CWM recovery from Rom Manager, but I am unable to get to recovery. I tried to unlock the bootloader with RDS Lite flashing derpunlock from the puddin forum, not the 2.3.5, but it failed
Sent from my MB855 using xda app-developers app
jordan.nave said:
Is it possible to flash a custom recovery with the locked bootloader? I'm used to HTC and am not to familiar with Motorola's Android
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Need to use the boot strap recovery, MOTODX_Bootstrap_Signed.apk. Its based off Clockwork. Make sure you only try to flash locked roms though. If you try and flash anything not supported your more than likely going to be on my boat... Softbricked. I was a flashaholic with my Evo, now im a bricked bum looking for light...
Look in Lokifish Mars Sticky on all thing Mopho. It has links to everything you will need in it.
No you cannot flash a custom recovery on a locked bootloader.
Sent from my MB855 using xda app-developers app
not possible for now. I tried it already and it is unsuccessful
jordan.nave said:
I have already successfully rooted, and attempted to flash CWM recovery from Rom Manager, but I am unable to get to recovery. I tried to unlock the bootloader with RDS Lite flashing derpunlock from the puddin forum, not the 2.3.5, but it failed.
Click to expand...
Click to collapse
I'm in the same boat. I just got a used Photon and it already had the 2.3.5 (45.4.13 254_13) ROM on it. I got it rooted successfully at least, but get the error when trying to install the DERPUNLOCK.SFB file.
Any solutions out there yet? Can the unit be SBF-ed back to 198_7 and then the bootloader unlocked?
(I'm sorry if this is a redundant question, but I haven't found a clear answer and have searched the forums extensively!)
THANKS!
*****
MeanJellyBean said:
Need to use the boot strap recovery, MOTODX_Bootstrap_Signed.apk. Its based off Clockwork. Make sure you only try to flash locked roms though. If you try and flash anything not supported your more than likely going to be on my boat... Softbricked. I was a flashaholic with my Evo, now im a bricked bum looking for light...
Look in Lokifish Mars Sticky on all thing Mopho. It has links to everything you will need in it.
Click to expand...
Click to collapse
Okay, I successfully flashed bootstrap recovery, what ROMS do I need to look out for and not flash?
jordan.nave said:
Okay, I successfully flashed bootstrap recovery, what ROMS do I need to look out for and not flash?
Click to expand...
Click to collapse
What version you on, Android version. 2.3.4 or 2.3.5 ?
Sent from my Motorola Electrify using xda app-developers app
jordan.nave said:
Okay, I successfully flashed bootstrap recovery, what ROMS do I need to look out for and not flash?
Click to expand...
Click to collapse
Your only real option is mof2.3.5 unless you want to run a rom that is not supported anymore ie imperium, rocko, skinny. Mofs rom is damn good though. Give it a shot and see what you think.
If your on 2.3.4 go with mofo2.3.5ish if your on 2.3.5, don't flash any roms locked or unlocked. Just be happy your phone works!
The reason being is because will the roms are based on 2.3.4 and since 2.3.5 locked bootloader, anything 2.3.4 based will cause you to soft brick, with no sprint sbf to fall back on. Peetr and mo are actively working on a working sbf for those who are on USC electrify sbf.
Sent from my Motorola Electrify using xda app-developers app
I'm on 2.3.5, and i really don't care about breaking 4G or anything CDMA... Only need GSM if that's possible...
Sent from my MB855 using xda app-developers app
Signed boot.img with its modules is needed to install after each locked rom.
Don't want to sound like a n00b, but where would those be in the ROM threads? I'm so used to HTC's phones, so going to this Photon makes me feel like I'm starting from scratch...
Sent from my MB855 using xda app-developers app
Actually nowhere yet. You need to wait.
Ohh okay. I'll just sit back and wait for the devs. Really wish I hadn't traded my Evo LTE for this Photon....
Sent from my MB855 using xda app-developers app
Any progress on unlocking the bootloader on the OTA 253_13 build?
Still curious about being able to sbf downgrade to 254_7...
And info GREATLY appreciated.
So I am running SuperChargedHatka rom and they just updated to the new ota. Ok my question is are we better off flashing back to stock. Relocking. Updating. Then unlocking again? Are there things in the update we can't get with custom roms?
Sent from my HTC6435LVW using xda app-developers app
Anyone? Is it more beneficial to go back to stock everything and accept the update then unlock again and install a custom ROM? Or is there no real benefit.
Sent from my HTC6435LVW using xda app-developers app
If you relock, stock, update then unlock and flash a rooted Rom, make sure it has the update in it or you will possibly flash the old rom files over the new..
Sent from my Droid DNA using Tapatalk 2...
You can't get the new radios or hboot just by flashing the ROM. So if you want them then you have to lock, run ruu, update, and unlock again. Kind of a pain but just the way it is right now. If you have the unlock bin you originally got from HTC it does make it a little easier.
Sent from my Droid DNA running ZoneDNA ROM..
Alright cool. That's what I was wondering. Too bad flashgui won't flash radios too
Sent from my HTC6435LVW using xda app-developers app
Ajj915 said:
So I am running SuperChargedHatka rom and they just updated to the new ota. Ok my question is are we better off flashing back to stock. Relocking. Updating. Then unlocking again? Are there things in the update we can't get with custom roms?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Check out my guide for doing just that its in my sig