Hi Guys,
its a little bit strange..
i want to install v6 supercharger on .62 firmware in Rood Mode with Busybox 1.18.2 and Script manager like in the how-to.
Ive read v6 is with every phone compatible.
When i activated them on .62 and reboot my phone it stocks on doomlords kernel logo and after few miniutes i have a blackscreen!
so, what iv done wrong?
Can you help me?
edit // Sorry for posting this in dev section when its wrong...
It's almost IMPOSSIBLE to mess up with Supercharger so much that you break your phone so I'm sure you did everything right.
If it doesn't work with .62 so it just does not work (yeah, thanks captain Obvious xD) and you have to wait for the fix.
There was a similar problem with RC5.1 and xperia phones when they hanged up before bootanimation after applying any fix and SuperClean-ing.
Currently I'm using RC5.2 and everything is ok. I wanted to switch to RC6 but suddenly read that it causes problems again and again with xperias.
EDIT: I've also read that there are some problems with RC6 and changing some values in build.prop/local.prop and with some tweaks so it means that SuperCharger was not working 100% and wasn't applying launcher tweak.
Sent from my beautiful Xperia PLAY using xda premium
thanks .. can you give me the link for rc5.2 i found only a link for rc4
RC Board:
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
As a small tip: I'm not fond of Script Manager, so I modified the .txt file (be simply changing the extension) to a .sh file. In Terminal Emulator I do the following:
su
cd sdcard
sh v6.sh (renamed the file)
The script will run the exact same as you would Script Manager. No need to reboot if you've already applied the changes the first time around.
I can't seem to get this to stick after a reboot
Sent from my R800i using xda premium
You cant see the changes after reboot.
To see it you have to run the .sh script in script manager or whatever again!
evo_racer said:
You cant see the changes after reboot.
To see it you have to run the .sh script in script manager or whatever again!
Click to expand...
Click to collapse
Correct. I never turn off my phone which is why I never bothered with Script Manager. Probably something I should have added in my earlier tidbit.
= X
What are your preffered ram setting? Is it mega ram,?
Sent from my R800i using Tapatalk
cmangalos said:
What are your preffered ram setting? Is it mega ram,?
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
Right. Mega Ram v1.
What's Mega ram?
Sent from my R800i using xda premium
Mega RAM was made for phones that have 512MB of RAM and above.
n0_face said:
Mega RAM was made for phones that have 512MB of RAM and above.
Click to expand...
Click to collapse
So your saying the choice of the 3 for 512mb?
Sent from my R800i using xda premium
I think when I first started to use V6 I was using the generic '6' setting, but after a while switched between '8' and '9' (both had around equal performance difference for me).
Never tried the aggressive settings myself...
evo_racer said:
Hi Guys,
its a little bit strange..
i want to install v6 supercharger on .62 firmware in Rood Mode with Busybox 1.18.2 and Script manager like in the how-to.
Ive read v6 is with every phone compatible.
When i activated them on .62 and reboot my phone it stocks on doomlords kernel logo and after few miniutes i have a blackscreen!
so, what iv done wrong?
Can you help me?
edit // Sorry for posting this in dev section when its wrong...
Click to expand...
Click to collapse
Yeah... Having this problem too.
Related
Hey Guys, i really have tried everything i know and have not been successful. I have been running CM7 on my HTC aria for about as long as it has been out and i love the rom!
I recently just got My Xperia and over the last few days i have been slowly getting it to where i want it to be. so far i have rooted, have installed xRecovery, the CM7-zmod v003 rom, and i just flashed dooMKernel v04x/s for LOCKED bootloaders. I've tried the last three zip packages for set cpu. 2.22-2.23-2.24 and none of them succesfully installed. I have superuser permissions on AdBlock or AdFree whichever it is. But SetCPU is nowhere to be found.
Any Help would be greatly appreciated.
Also A HUGE thank you to everyone who puts countless hours into all these developments. It is so appreciated and we all owe you. So THANK YOU!
So nobody has any ideas???
I have fixed permissions and still nothing. The rooting worked as I have SU access. . . . .
Sent from my X10 using XDA App
macmanjpd said:
So nobody has any ideas???
I have fixed permissions and still nothing. The rooting worked as I have SU access. . . . .
Sent from my X10 using XDA App
Click to expand...
Click to collapse
SetCPU is a paid app in the Android Market or it's free for XDA users from the SetCpu application thread. Note the Zip files in the application thread are not for installing the application via XRecovery CWM recovery, you need to extract the .apk file from the zip, place it on your sd card and use a file manager to access and install it.
Wow. I'm a great big dummy ....totally spaced on that one.
Thanks for pointing that out big dog.
Sent from my X10 using XDA App
macmanjpd said:
Wow. I'm a great big dummy ....totally spaced on that one.
Thanks for pointing that out big dog.
Sent from my X10 using XDA App
Click to expand...
Click to collapse
Your welcome and we all have those noob moments
Force Close?? Terminal Emulator
So i have unlocked my bootlader, loaded DoomKernel v05x/s. on CM7 003. I cannot open the terminal emulator ever, it just FC's every time? any thoughts?
macmanjpd said:
So i have unlocked my bootlader, loaded DoomKernel v05x/s. on CM7 003. I cannot open the terminal emulator ever, it just FC's every time? any thoughts?
Click to expand...
Click to collapse
I'm not sure, could it be an issue with the Rom? Try a search in the Rom thread to see if you can find anything there.
Other than that, try installing the app directly from the market.
Sent from my X10i using xda premium
Update it via market.
Thanks guys. I got it working.....after checking out several roms I've settled on the CM7 zmod 003. Using doomkernel like in the title. It is real smooth and pretty fast. I flashed the doom wifi zip fix but I am still having some intermittent wifi issues. Ill have to check the thread out to see what else I can find. Was thinking of editing build prop file to add some tweaks, any idea if its worth it with the cm7 build?? ... I already changed LCD density and I am really pleased with effect.
Sent from my X10 using XDA App
macmanjpd said:
Thanks guys. I got it working.....after checking out several roms I've settled on the CM7 zmod 003. Using doomkernel like in the title. It is real smooth and pretty fast. I flashed the doom wifi zip fix but I am still having some intermittent wifi issues. Ill have to check the thread out to see what else I can find. Was thinking of editing build prop file to add some tweaks, any idea if its worth it with the cm7 build?? ... I already changed LCD density and I am really pleased with effect.
Sent from my X10 using XDA App
Click to expand...
Click to collapse
I doubt if there are that many tweeks included already in that ROM, it was one of the early ones after 2.3 came out. you'll probably find a few that will help improve it.
Just make sure to do a backup before making any changes.
Hello
I've just got a 101 G9 Turbo and just SDE/rooted it, but there seems to be little in the way of performance tweaks.
I've got an LG Optimus 2X phone and theres all sorts of tweaks in the init.d folder and was woundering if theres anything we can do to the G9 to give a bit more performance?
Something like this?? - http://forum.xda-developers.com/showthread.php?t=1730872&highlight=dalvik
Will the above work on the G9?
Most of the tweaks in general android section should work. Personally i prefer using Supercharger, which works fine for me. I do not see reason why the tweak you posted wouldn't work, if the system supports it. If there are problems with the script starting, use script manager to run it on boot.
julle131 said:
Most of the tweaks in general android section should work. Personally i prefer using Supercharger, which works fine for me. I do not see reason why the tweak you posted wouldn't work, if the system supports it. If there are problems with the script starting, use script manager to run it on boot.
Click to expand...
Click to collapse
Do you have a link for supercharger? Did you apply the it your self or was it already in the rom? Which Rom are you using?
Sorry for all the questions
EDIT: found it - http://forum.xda-developers.com/showthread.php?t=991276
the1c3man said:
Do you have a link for supercharger? Did you apply the it your self or was it already in the rom? Which Rom are you using?
Sorry for all the questions
EDIT: found it - http://forum.xda-developers.com/showthread.php?t=991276
Click to expand...
Click to collapse
I'm using 4.0.7 rooted & deodexed. I applyed it myself. I didn't get whole 100% supercharge, so I had to use script manager to start supercharger script on boot.
Sent from my GT-I9100 using xda app-developers app
julle131 said:
I'm using 4.0.7 rooted & deodexed. I applyed it myself. I didn't get whole 100% supercharge, so I had to use script manager to start supercharger script on boot.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Cheers julle131, just seen the ultimate guide link in your signature...
...the problem I always have with tutorials is they tell you how to install/do stuff but not why you should i.e. the benefits.
I'll try the supercharger tonight, I'm using go launcher HD, is that the one that everyone recommends, I use the normal go launcher ex on my phone that why I used the HD version.
This fixes the lag on the Sony dialer, conversations and su.
Just put the script in init.d or for locked set script manger to run it at boot, if you don't know how to do the above search.....
https://www.box.com/shared/f0baa9cddf12f4601fc4
Will it work in stock based ROMs e.g. Real ICS ??
Abhi$hek said:
Will it work in stock based ROMs e.g. Real ICS ??
Click to expand...
Click to collapse
yes..I think
Will it work if i use xperia s dialer and messaging?
Please share some more information with us!
Seems interesting.
N.
saeed-constantine said:
This fixes the lag on the Sony dialer, conversations and su.
Just put the script in init.d or for locked set script manger to run it at boot, if you don't know how to do the above search.....
https://www.box.com/shared/f0baa9cddf12f4601fc4
Click to expand...
Click to collapse
THX Bro! I use xperia s dialer and your script works, but some times i have lags.
Massaging? Wow! Welcome to the World of Cybersex!
It's not quite clear to me how this script does anything at all unless the various LOCK_APP_* environment variables it uses have been set before. Where are these defined?
How to install?
Sent from my WT19i using Tapatalk 2
Can anyone help us how to do this?
Sent from my WT19i using Tapatalk 2
botski said:
Can anyone help us how to do this?
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
It says put it in init.d folder if you have kernel with init.d support or set it to run at boot (with script manager that is)
Don't double post, use the time waiting for an answer to search.
Btw i'm not very convinced by the contents of this script...Might as well run supercharger by zepp and bulletproof those apps...
I have an Xperia U, Flashed with ICS since my SI no. hasn't come out yet.
And my phone eats a ridiculous amount of RAM, I just wanted to know if it is normal or...?
Help appreciated.
Thanks
I'm attaching a few SS to help.
Ics is heavy on ram use. Don't worry about it. Just use your phone as normal
Sent from my Xperia S using Tapatalk 2
Normal, no issue, if you want some extra ram install CM9.1
you can install supremacy script and v6 supercharger and use home launcher default cause home launcher 3rd app make your RAM is like fully
mekayzer said:
Normal, no issue, if you want some extra ram install CM9.1
Click to expand...
Click to collapse
Ruliindrapraja said:
you can install supremacy script and v6 supercharger and use home launcher default cause home launcher 3rd app make your RAM is like fully
Click to expand...
Click to collapse
Thanks for the replies and suggestions guys, But I really have no idea what they are and how to go about installing them. Any sort of help is appreciated. A link to a tutorial or anything.
Bear with me, Am new to Droid!
kushalsv said:
Thanks for the replies and suggestions guys, But I really have no idea what they are and how to go about installing them. Any sort of help is appreciated. A link to a tutorial or anything.
Bear with me, Am new to Droid!
Click to expand...
Click to collapse
for cm9.1
install cwm recovery
boot into recovery
flash rom.zip ( after downloading obviously )
flash gapps.zip
wipe data
reboot
for v6 supercharger script
download busybox
download script manager
download v6 supercharger script
run script manager
install script
search xda for links
drsanket_xperia_u said:
for cm9.1
install cwm recovery
boot into recovery
flash rom.zip ( after downloading obviously )
flash gapps.zip
wipe data
reboot
for v6 supercharger script
download busybox
download script manager
download v6 supercharger script
run script manager
install script
search xda for links
Click to expand...
Click to collapse
?
He said he is new to Android, although you listed the right steps you left out some major points.
Unlocked bl for CM?
Root and install CWM?
NANDROID BACKUP?
Just a few little points
Sent from my ST25i using xda app-developers app
drsanket_xperia_u said:
for cm9.1
install cwm recovery
boot into recovery
flash rom.zip ( after downloading obviously )
flash gapps.zip
wipe data
reboot
for v6 supercharger script
download busybox
download script manager
download v6 supercharger script
run script manager
install script
search xda for links
Click to expand...
Click to collapse
corsav6 said:
?
He said he is new to Android, although you listed the right steps you left out some major points.
Unlocked bl for CM?
Root and install CWM?
NANDROID BACKUP?
Just a few little points
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
You did list out what is necessary and stuff man, i appreciate it. But as i said, I really didnt understand. Virtaully nothing, All i know to do in my phone is Flashing to the flashtool. Thats the only thing I've done. So a better way would really help. Thank you guys.
And by the way, This may be a very stupid question, But anyway I'm gonna ask..
Is it possible to ROOT our device WITHOUT unlocking bootloader?? As i heard that unlocking ones bootloader is real risky and stuff.
What you think?
Help a noob till he gains some experience! Thanks!
======================================================================
[WHAT'S NEW?] FINAL 4.2.2 build feature notes...
10.1.5 comes with HALO.
10.1.6 comes without HALO.
======================================================================
[DOWNLOAD]
CM10.1.5 http://jenkins.androidarmv6.org/job/android/575/ (I don't own a copy of 10.1.5 since I had no need of HALO,
if anyone has a copy - contact me)
CM10.1.6 DOWNLOAD
Note: Google apps are NOT included - download from HERE THESE or use this MIRROR.
======================================================================
[Known bugs]
#1.Can't check Auto-Brightness in Settings->Display->Brightness?
==>>Pull down the Quick Settings Panel on Status Bar, choose Brightness and check Auto-Brightness from there.
#2. Wifi teather not working? [Fixed since CM 10.1.3]
==>>Search "wifi teather" on Play Store, users reported that "Wifi Teather Root" works. If anyone deers to confirm ill update this.
#3. Wifi don't reconnect after deep sleep (or 10min of inactivity)? [Fixed after July builds]
==>>A xda member, @soulreaver1 was frustrated of the same issue, so made an app that fixes it, visit it HERE where you will find the playstore link. It takes only a few seconds to thank him !
#4. BOOTLOOP after flashing SD-Ext script?
===>>Your SD-Card is not partitioned like it's supposed to caused by unknown bugs likely by Clockwork Recovery and u need to repartition it your SD-Card...So far I can only recommend Amon Ra, since I did it trough it and got the SD-EXT Tweaks working.
[Tips & TRICKS]:
==>>There are so many scripts on xda to boost your performance, wondering which to choose?
#Well It's best for you to try them all and see which one suits you best but if you wish to save some time click HERE , I personally use "Operation Killjoy" myself.
(CrossBreeder is another tweak, mentioned since it's compatible with Killjoy,
If you wish to combine it I suggest you to flash one at a time, boot your device after first flash and let it stabilize about a minute or 2, then flash CrossBreeder).
Flashing both at the same time caused great delay and system misbehaving, whats it gonna be it's up to you.
Others scripts I tried are Adrenaline Engine and Pure Performance and Fly-On(I believe was the name).
Know a better one then all above? Feel free to share it with us.
Credits on Operation Killjoy script goes to @Exit_Only.
==>>Flashed but no gapps?
#Since you're flashing experimental build, use THESE 4.2.2 Gapps or this MIRROR
Thanks to @rr0yy!
==>>Developer and Performance options missing??
#Enable performance and developer options with x7 times clicking on Settings->About->Build Date.
==>>Looking for data2ext solution?
#Here's the Thread link and...
==>>The Tutorial !
(Note: A partitioned SD card is required, otherwise skip this and partition it first.)
#1.After done with flashing ROM, flash the sd-to-ext* script.
#2.You must boot phone at least once before you can flash the second script. So, boot ROM and after 2 min are passed and system stabilized, reboot in recovery.
#3.Now flash the second to-sd-to-ext* script.(it should take about 2min to complete.)
#4.PROFIT! You got extra internal space! Get downloading cool new apps
(Oh, wait, If you get any error or stuck on "mounting sd-ext" or "unmounting sd-ext" do this:
Go into Mounts and Storage and try to mount /sd-ext. If you get Error Mounting then your SD Card is not partitioned well and I recommend you to flash Amon Ra Recovery and partition your SD Card from there. I had the same issue because of Clockwork buggs as already mentioned )
You just had to do it, huh?
Sent from my LG-P500 using xda premium
you macedonian nut
isn't the general thread and the other thread on the original works enough? D:
Sent from my LG-P500 using xda app-developers app
Left4DeadMW said:
A link from Jenkins Builds since many users of our O1_p500 didn't know about it and I personally can't find it here in the " LG Optimus One, P500, V"...
==> http://jenkins.androidarmv6.org/ <==
(latest p500 build for lazy ppl -> http://jenkins.androidarmv6.org/job/android-experimental/10/ )
(i did NOT developed this, although those are jenkins original developed builds,I do believe that someone should've made a thread for it here on xda, some of us p500 users use it daily and we can exchange some info's about it or simple help each other out...If YOU moderator look at this as something "wrong" simple transfer in "General" or Delete it.)
Cheers..
Click to expand...
Click to collapse
Where is the Developer Settings in this rom?
I couldn't seem to find it anywhere. Some help please
Thanks
settings>about phone>tap build number 8 times and the settings will appear (it will tell you "you are now a developer", just hit back and the development options will be there along with the performance settings)
Sent from my LG-P500 using xda app-developers app
LeftForDeadMW ... this is repatative bro ... but as u have already made the thread utilization will be best if you can put up latest jenkins build changelogs ..
/\ |\| /\ |< |\| | |\|
pls hit thanks to show gratitude fr help
:: peace
Sent from Legendary Pandoras Box unlocked with my Rooted LG P500 Optimus One ...
I put it in "Original Development" since it's original and it's most likely for people to find it here then in General trough..
I wanted first to see you people will show some interest in this then put some detailed information about it...
(Or if you disagree with my opinion PM Moderator and you will save me some time )
Will do the "thread makeup" when i get back home. :good:
Sent from my LG-P500 using xda premium
dnle71 said:
You just had to do it, huh?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes :evilsmile:
Sent from my LG-P500 using xda premium
729 mhz- 320mhz smartass
Great smoothness....no lag ...no hang..
I am running April's build
Sent from my LG-P500 using xda premium
The latest build is named RC1..! really good for daily use...
Yeah I feel this thread was needed..
aravindsagar said:
The latest build is named RC1..! really good for daily use...
Yeah I feel this thread was needed..
Click to expand...
Click to collapse
How is battery with 3g, Wi-Fi usage?
Depends fairly on usage, freqencies, apps, traffic and so on
Sent from my GT-P1000 using xda app-developers app
nomancoolboy said:
729 mhz- 320mhz smartass
Great smoothness....no lag ...no hang..
I am running April's build
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I checked everything for changed since April's build till now...
Noting found -_-
All i can post for now is cm10-cm10.1 changelog since I found it in "about"
If someone could provide me with some clues where can i find it then great, till then [empty].
renzetti.s said:
How is battery with 3g, Wi-Fi usage?
Click to expand...
Click to collapse
Bad..very bad...
I don't know exactly for 3G but i can confirm that battery drain with on Wifi is huge...about -10% for like 10-15min on Wifi..
(played with my bro yesterday: wifi+game = from 20%->4% in 6-7min -_- )
Otherwise you get about 10hours battery with using phone not so much...
(-30% of time into Airplane mode)
(-No 3G, Wifi, Bluetooth..)
(-Greenify used to make sure no app runs in background.)
Playing games often turns your phone to "hand heater" and wastes your battery so quicky..(i reboot and remove the battery about 2min to cool off..)
If there is anything that should be fixed next, it's battery drain for sure..
Int2Ext/Data2ext
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
No more builds after 06052013?
Left4DeadMW said:
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
Click to expand...
Click to collapse
@Left4DeadMW - Link2sd is working fine.
But suddenly Jenkins stops building from yesterday.The last build dated 06052013 but since then it stops.Anybody knows whats d matter?
sumansur2008 said:
@Left4DeadMW - Link2sd is working fine.
But suddenly Jenkins stops building from yesterday.The last build dated 06052013 but since then it stops.Anybody knows whats d matter?
Click to expand...
Click to collapse
The builds are executed with the help of a timer.
Next executions
Timer-Weekly 11/05/2013 02:08
so, the next build will be executed tomorrow.
Left4DeadMW said:
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
Click to expand...
Click to collapse
I managed to get INT2EXT working with the latest RC1, it was simply a matter of trimming the ROM to give you more free space in your system partition. You may also need to mount /system in your recovery before flashing the script in order to get it to work.
----------
Sent from the moon.
And about jenkins changelog?
Did anyone found something specifically rather then "changes.txt" on build website?
Sent from my LG-P500 using xda premium