Please help me with xperia neo - Sony Ericsson Xperia Neo, Pro

I write for a meaningful consultation, it happens that I came to repair a neo xperia v which is not hooked 3g only edge, well I update the firmware with seus, then I use flashtool to try to fix that issue,but nothing happen even,so i put on back on hands from customer,but today he come to me for another problem,now the cellphone doestn work,it turns off automatically and battery never show a percent of charge just 0% but the battery its full,i seen that some one tried to repair it but put the mt15i firmware and the cellphone is a mt11i,so i did the next situation i put once again the mt11i firmware but its still the same,not working as it is,so what can i do to fix it?? please help me,

Sounds like the old downgrade to 2.3.3 and then upgrade again to a newer Gingerbread version 0% battery issue in which case the phone is now completely broken and unfixable.

Please change that title thread in edit button>advanced, it against the forum rules. Thanks.

Related

overheating problem on my st15i

hi there all
i have bought xperia mini yesterday and it was 2011 version with stock rom
2.3.4 brand 4.0.2.a.0.62 then i faced the overheat problem the back and menu
buttons automatically work i have just let it to calm down then use it again
so heard about solution in this post : http://forum.xda-developers.com/showthread.php?p=21267142#post21267142
it request rooooot but i cant root my phone on 62 brand so what should i do
go to the warranty center and tell them to re calibrate the buttons or waiting for
ics upgrade this end of month and do you think guys the overheating will be solved on the ics or what
or should i do it with myself but i am afraid of breaking my phone its still new
so is there any safe way to root the phone and use the gscpit
plz help me out
I have the same problem with opening and closeing "menu" and "back" buttons when i touch someone. I tried script on overheat issue, but any change... :-(
Sent from my ST15i using XDA
You can downgrade to 0.42 with flashtool or wotanserver, then root, and then update OTA (over the air) to 62 to maintain root.Info on how to do that here.
oky thanks guys i have downgrade it with wotanserver and root it and used the script and i have test it it works fine without the overheating problem i have played 3 races on asphalt 6 and it didnt heat fast and i think the 42 is better
than 62 cuse it has a lot of problems
but i have another problem and its the auto brightness its so annoying i dont know what the bravia engine looks like becuse of the light sensor and i found a app called disable auto brightness xperia when i install it and try to open it but it says no program can do this action so i read the description it says when i instal it i will find a shortcut of program that i can control the light sensor on or off so what should i do

[Solved]Help me!!My Xperia S Display got Distorted..

Hello...im new here n i am from malaysia..I just recently purchased a Sony Xperia S 3 days ago.Today i want to change my simcard then suddenly when i turn on my phone the display got all distorted and weird. I don't know what have cause this and what to do. Please help me..
Im on ICS 4.0.4. Build 6.1.A.0.452 rooted.
This seems tricky.
You could try using PC Companion to repair your phone software by flashing a stock rom all over again. If the screen issue is a bug, it should go away.
If the problem still persists after repairing it with PC Companion, I suggest you take it back to a Sony service centre or the place you bought it from.
try flashing a new firmware.......
is it brend new SXS or used? i think u should flash a new kernel, or repaire with SUS...
this is a brand new SXS...im currently downloading a new firmware n kernel n will try to flash it..
ok..i just flash my SXS the latest firmware..n the prob is solved..thnx so much for the help guys..hope this prob wont come again..:victory:.

[Q] Sony Ericsson Xperia Neo 0% battery Problem

I'am Using SE Xperia Neo mt15 i
i downgraded it without unlocking bootloader
this caused me 0% battery problem...
due to this if remove the charger my phone switches off immidiately showing low battery..
i tired a lot but i can't fix it..
pls help me XDA i have lot of hope on u...
tell me wat to do step by step
my xperia neo is being not used for past 7 months..
pls help me guys..
please provide more info.
cant help if you dont provide much info
If you dont mind data user on your mobile , maybe you can try flash FTF file with Flashtool.
Hardware failure due downgrade to android 2.3.2.
Sticky thread in general section have link to thread about that problem, which you could easily found googling..

[Q] x10 mini big problem

Hello, i really need your help to fix my x10 mini.So lets start...Yesterday i wanted to upgrade my x10 to android 2.2. Everything was going well , i rooted the phone, then i bootloaded the phone.But after bootloading there were no service. So i tried to run again flashtool and going to to flash mode (you know, when you need to turn off the phone and hold "back" key while plugging usb cable) and yeah in the middle of the flashtool process i pluged out usb cable and (while green led was still on) i pulled out memory card(don't understand why really -_-). So after pulling out sd card green led just turned off and thats it, phone died! i couldnt turn it on, when i charge nothing happends, when i plug in to pc nothing happends, and few times i tried to detect it with s1tool and restore but even when plug in usb cable while holding "back" key but nothing happends even if i wait holding "back" key for 10min.I dont know what to do my x10 mini just died with absolutely no signs of life.Please, I would be very grateful for your help.By the way i have old school x10 mini (not pro) so i cant take out battery
P.S. sorry for my bad english
If you can't get into flashmode you are going to have it JTagged at a repair shop.
And FYI: You should have relocked the bootloader with S1Tool as soon as you found out you didn't have a signal.
Secondly: Do NOT ever interrupt the flashingprocess...
I guess you'll have to pay for it to get back up and working.
SmG67 said:
If you can't get into flashmode you are going to have it JTagged at a repair shop.
And FYI: You should have relocked the bootloader with S1Tool as soon as you found out you didn't have a signal.
Secondly: Do NOT ever interrupt the flashingprocess...
I guess you'll have to pay for it to get back up and working.
Click to expand...
Click to collapse
how much do you think it will cost? anyway if i repair it should i try to upgrade again to android 2.2 or 2.3? because being stuck with android 2.1 is bull****, but after this i dont think i want to take that risk again.And im 100% sure after bootloading phone will have no service again and the only way to fix signal is relock with s1tool right? so would it be possible that after bootload i would upgrade to 2.2 and then use s1tool to relock bootloader and i would have service again? would it be possible? And again sorry for my bad english
EchoLT said:
how much do you think it will cost? anyway if i repair it should i try to upgrade again to android 2.2 or 2.3? because being stuck with android 2.1 is bull****, but after this i dont think i want to take that risk again.And im 100% sure after bootloading phone will have no service again and the only way to fix signal is relock with s1tool right? so would it be possible that after bootload i would upgrade to 2.2 and then use s1tool to relock bootloader and i would have service again? would it be possible? And again sorry for my bad english
Click to expand...
Click to collapse
You can actually upgrade to 2.2 custom rom without unlocking your bootloader. Only if the ROM you choose needs a custom kernel do you need to unlock the bootloader.
And once you've flashed a custom kernel you can't relock the bootloader, that will brick your phone again. Relocking the bootloader can only be done if you're running an original SE kernel.
SmG67 said:
You can actually upgrade to 2.2 custom rom without unlocking your bootloader. Only if the ROM you choose needs a custom kernel do you need to unlock the bootloader.
And once you've flashed a custom kernel you can't relock the bootloader, that will brick your phone again. Relocking the bootloader can only be done if you're running an original SE kernel.
Click to expand...
Click to collapse
so how to upgrade to 2.2 or 2.3 and dont have "no service" issue? can you give me link with rom that dont need bootload? and again how much would cost to fix this problem?
EchoLT said:
so how to upgrade to 2.2 or 2.3 and dont have "no service" issue? can you give me link with rom that dont need bootload? and again how much would cost to fix this problem?
Click to expand...
Click to collapse
I have no idea what it costs to repair your phone, never had to do that myself, and even if i had, it will be different from where I am to where you are (probably). As for upgrading: You set out to update your phone to android 2.2 so did you not already choose a ROM to put on your phone? All 2.2 ROMS run on the stock kernel. Look for CM6 ROMs in the x10mini development section (although most download links will be dead by now).
Or look for MiniCM7, you can still get the 2.0.7 version, which runs on stock kernel, from 2.1.0 it needs the nAa custom kernel (just click on the downloads link in the MiniCM7 posts and it will take you to the repository where you can download older versions of that ROM).
There is not much else available for stock kernel on the x10mini unfortunately, although pongnamu is working on a MIUI gingerbread version for stock It's just not available yet.
If anyone cares i tell you what heppend in last couple days.Well first of all i decided to buy new phone instead of fixing old one.I bought lg optimus l7.So anyway today i dont know why but i took my x10 mini to repair shop and i i found out that fixing x10 mini brick is cheap only 30LTL(about 11.5$ ).But i think its so cheap only in my country , if you live in USA ,UK or in any other country it may cost few times more(I dont know that for sure ) and if you send your phone to SE the price may be insane compare to mine.My advice to others who want to upgrade their phones OS, DONT DO THAT BY YOURSELF IF YOU DONT KNOW WHAT YOU'RE DOING! And actualy x10 mini is kinda outdated so if you want to upgrade OS for only playing newest games and newest apps ,x10 mini wont run them propertly so if you want only to play games and use best apps you should buy a new phone.
P.S. and again sorry for my terrible english
EchoLT said:
If anyone cares i tell you what heppend in last couple days.Well first of all i decided to buy new phone instead of fixing old one.I bought lg optimus l7.So anyway today i dont know why but i took my x10 mini to repair shop and i i found out that fixing x10 mini brick is cheap only 30LTL(about 11.5$ ).But i think its so cheap only in my country , if you live in USA ,UK or in any other country it may cost few times more(I dont know that for sure ) and if you send your phone to SE the price may be insane compare to mine.My advice to others who want to upgrade their phones OS, DONT DO THAT BY YOURSELF IF YOU DONT KNOW WHAT YOU'RE DOING! And actualy x10 mini is kinda outdated so if you want to upgrade OS for only playing newest games and newest apps ,x10 mini wont run them propertly so if you want only to play games and use best apps you should buy a new phone.
P.S. and again sorry for my terrible english
Click to expand...
Click to collapse
Thank you for the update. It is always interesting to hear about solutions.
And I agree with you, that users should be careful doing things they do not understand.
I always recomend users to read a guide 3 times before they start doing anything, make sure they know what every step is about and why it must be done.
And most important is to make sure what phone model they got, and make sure that ROM/Kernel is made for that model. :good:
Hope users can learn from your expierence. We should have done more to warn about "what not to do" and stuff like that :angel:
EchoLT said:
fixing x10 mini brick is cheap only 30LTL(about 11.5$ ).But i think its so cheap only in my country , if you live in USA ,UK or in any other country it may cost few times more(I dont know that for sure
Click to expand...
Click to collapse
Emperor.dk said:
Thank you for the update. It is always interesting to hear about solutions.
Click to expand...
Click to collapse
Just got my U20i back from jtagging (didn't have no repair shop at hand,so I had to send it in to a shop), I payed 30€ in Germany (would be somewhat about $40), plus shipping.
Next time I send it to your repair shop, seems to be cheaper even with double shipping costs :laugh:
I thought so ,in Lithuania stuff like that is really cheap if you compare to Germany,UK,USA etc.

[Q] help me fix my battery problem

someone pls help me my phone is always gets off i won't be able to on ,actually by mistake i wipe battery stat yeasterday then after this problem start.i have flash many times the stock firmware like .062/.587 but its not working. And when i plug in charger then i can switch on my phone but when i remove charger it will go automatically off .........someone pls help me i know there is many genious member who can solve my problem and i will be greatfull to thanks them all.....:crying: i am using sonyericson live with walkman wt19i (cwm 5.0.27)
This happens me with the 4.0.4 official. With CM9 not.
I have the same problem bro. My xperia mini won't open unless you connect it to a charger. Can someone please help us

Categories

Resources