I´ve followed the tutorial "The HP Touchpad Demo Unit Solution - Bypass Activation" since my unit doesn´t seem to have been unlocked.
I have a problem with this step:
3. Add the testing feeds for the touchpad (armv7) (Instructions here: Testing Feeds - WebOS Internals )
I was able to do everything up to that point but just cannot add the testing feeds.
Am I supposed to enable both alpha and beta testing feeds and if so, how do I gain access to the command line. I´m completely new to this so any detailed help would be appreciated.
Thanks in advance
Adding of the testing feeds needs to be done via novaterm prior to installing preware. If you follow the directions as posted, its easy. Make sure you enable developer mode first.
siralsmooth said:
Adding of the testing feeds needs to be done via novaterm prior to installing preware. If you follow the directions as posted, its easy. Make sure you enable developer mode first.
Click to expand...
Click to collapse
Could you be more specific please? What part of the instructions are you referring to? Sorry but i'm really new to all this webOS thing.
So I uninstall preware, then install novaterm and then I enable developer mode in novaterm?
Well, I don't wanna be that guy that says use the search button....
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=821&Itemid=38
will get you started in the right direction.
http://wiki.rootzwiki.com/HP_Touchpad
Information on how to install novacom
If you know how to use the command prompt within windows, then using novaterm will be easy.
I can't explain every step, as most of my stuff is done via copy/paste or dual windows/monitors and tutorials.
Ok, step by step, so now developer mode is on. But my question now is weather I have to enable both alpha and beta testing feeds or just one of them.
Also, do I have to disable alpha and beta testing feeds and turn developer mode off after I finish.
Sorry if my questions seem stupid, but I´m struggling with this thing.
If u just want Beta then just enable Beta
If u want both then enable both.
and no u can leave everything enabled.
But u dont really need either, preware would do without testing feeds provided u are on webos 3.0.5. Testing feeds can really mess up your TP so you sort of need to know what you are doing. Dragons Lay Ahead
I´m downloading webOS 3.0.5. now, hope it works. Will report back
Alpha and beta feeds are where the good stuff is located. Kernels, tweaks, etc. Can you mess something up, maybe, but unlikely. The nice thing about preware is that it handles the install and uninstall processes. I used preware before the alpha/beta feeds were made less public, so for me, having less options available didn't sit well with me. Plus I was trying out the different kernels and when I suddenly lost access to them, wasn't all too happy. In my preware I have every feed enabled, just preference.
siralsmooth said:
Alpha and beta feeds are where the good stuff is located. Kernels, tweaks, etc. Can you mess something up, maybe, but unlikely. The nice thing about preware is that it handles the install and uninstall processes. I used preware before the alpha/beta feeds were made less public, so for me, having less options available didn't sit well with me. Plus I was trying out the different kernels and when I suddenly lost access to them, wasn't all too happy. In my preware I have every feed enabled, just preference.
Click to expand...
Click to collapse
What i mean is u dont need alpha or beta to get an overclock kernel now, same with other tweaks. so why play with stuff u dont understand.
only to be back here in a couple of days with a post "I messed up my Touchpad"
colin_404 said:
If u just want Beta then just enable Beta
If u want both then enable both.
and no u can leave everything enabled.
But u dont really need either, preware would do without testing feeds provided u are on webos 3.0.5. Testing feeds can really mess up your TP so you sort of need to know what you are doing. Dragons Lay Ahead
Click to expand...
Click to collapse
Thanks, everything seems so be well now.
Glad u have it sorted enjoy your TP
Related
Here is a ROM that I'm working on. Far from finished, but I wanted to get some input on it. Still working on better folders, once I figure out how to do it, and some registry changes. I hope to have this as a final version soon. I can't see any of the functionality change if there is a new release. But, feedback is what I'm looking for. I still have a lot to learn. Thank you.
Also, how do you list the software installed? I plan on trying to keep everything up to date as much as possible.
Download link:
Beta 2: http://rapidshare.com/files/264836743/ruu_signed.nbh
i guess I need to go back to the previous connection settings. The new ones seem kind of flaky. oh well. I created the rom before checking my work, now I know to check before rushing.
Hi splxtreme,
I created a free Collector account on www.rapidshare.com ... that's where folks are pulling my kitchen files from.
Doesn't appear to impose limits other than wait time for downloaders.
HTH,
Thanks for the info. I'll try that out.
im hoping for someone who can port the latest OSes into the fuze, since the awesome Da_G kitchens are coming to an end.
Try to get something that is lightweight, barebones with OS and the good HTC packages like album and wifi sharing. apart from that keep it very lean so that people can choose what they need and go from there.
OK, added some things and changed some. Hopefully this is already stable enough for people to use. I'm not done with it yet. So, enjoy.
i wonder if its possible to do a rom as i describe below.
- ROM should have only barebones OS simply tuned for the fuze.
- All other applications and settings should be packaged to individual cabs.
- Provide a list of all cabs with dependencies if any.
- Provide UC script to install all cabs in right order by default.
This way, we start off with a barebones rom and people who dont wish to tinker, can just use the given UC script to do all their packages, but if you want, you can remove some UC entries in case you dont want some packages.
k.electron said:
i wonder if its possible to do a rom as i describe below.
- ROM should have only barebones OS simply tuned for the fuze.
- All other applications and settings should be packaged to individual cabs.
- Provide a list of all cabs with dependencies if any.
- Provide UC script to install all cabs in right order by default.
This way, we start off with a barebones rom and people who dont wish to tinker, can just use the given UC script to do all their packages, but if you want, you can remove some UC entries in case you dont want some packages.
Click to expand...
Click to collapse
Very possible too do. Are there certain apps that you are looking for? Which do you not want to see?
splxtreme said:
Very possible too do. Are there certain apps that you are looking for? Which do you not want to see?
Click to expand...
Click to collapse
Fantastic, that would be something someone like me would be looking forward to
Some of the things i use are
HTC wifi sharing
Facebook
Palringo
Google maps
Bing search
windows live
lumos
skype
pocketwit
gpstest
office mobile
right now im using energyrom warhawk which is fantastic. I like the energyrom series since they are pretty and yet stable and fast. however they do have some fluff (not criticizing, NRG has made a great rom) that i dont use. im pretty sure if that was cleaned out then it would be a wee bit faster for me. but i dont have to time to go thru with Da_G's clean rom, and try to bring it to energy roms level, so if i could just get all settings and software in a neat cab list, i can certainly take a few minutes to prune that and get my ideal set working.
fluffs - what am i talking about?
things like beejiveIM - its beta and crashes all the time, non stock games, widgets, wifi monster are some of the things i could do without.
oooh and for name, how about "Touch of Blue"
UPDATE
Second Release
Right, you need to download the website and the application. Both of which i have now attached to this thread.
Follow the same process you did with the initial release, however, DO NOT edit the config file. There is now a tab in the app for this, please use this instead.
Also, there is now a log file if something goes wrong. It is called 2me2u_logfile.log and will be created in the same folder as the executable.
Initial Release: http://www.spikedsoftware.co.uk/blo...sending-smss-via-your-mobile-using-interwebs/
Evening guys,
I don't know about you, but i'm tired of texting from my whone when i'm at my desk. It's a long process and makes it look like i'm not busy at my desk, especially if i'm having a bit of a discussion with friends.
So i decided to write an app that sits on the phone, waiting for SMS's to be sent. You login to a web portal (which the app also logs into) and create your SMS there (as many as you wish) and when the app checks (every 1s to 300s) it'll download the messages you want to send, then send them. With a delivery report if you so wish.
Also looking for more features to add in once released, for example, SMSing you where your phone is, if you've lost it. Using the GPS.
It's still early, but that app is nearly programmatically complete. It's not very pretty, nor is the website. Hoping to get time this week to tidy it all up and get a test release out.
Watch this space Not even sure if this sort of app will be popular!
Will also be posting release information to my blog, http://www.spikedsoftware.co.uk
japanfred said:
Evening guys,
I don't know about you, but i'm tired of texting from my whone when i'm at my desk. It's a long process and makes it look like i'm not busy at my desk, especially if i'm having a bit of a discussion with friends.
So i decided to write an app that sits on the phone, waiting for SMS's to be sent. You login to a web portal (which the app also logs into) and create your SMS there (as many as you wish) and when the app checks (every 1s to 300s) it'll download the messages you want to send, then send them. With a delivery report if you so wish.
Also looking for more features to add in once released, for example, SMSing you where your phone is, if you've lost it. Using the GPS.
It's still early, but that app is nearly programmatically complete. It's not very pretty, nor is the website. Hoping to get time this week to tidy it all up and get a test release out.
Watch this space Not even sure if this sort of app will be popular!
Will also be posting release information to my blog, http://www.spikedsoftware.co.uk
Click to expand...
Click to collapse
Not sure if this app will be popular!! Who are you kidding?
They charge a lot for this kind of thing, so it isn't cheap. If you want free hosting, let me know - I am not sure what methods you will be using for this, but as long as you know how to create the site, I can host it.
Thanks for the offer, for the moment i have hosting sorted however
Do you have the urls to the competitors?
Cheers,
Dean
Sounds good, but how will this differ from, say, mIQ? That allows you to send and receive SMSs via the web.
Huh... didn't actually see that on the web there.
Safe to say it's far more advanced that my application would be anytime soon. The only difference would be my remote GPS finder and that i had a plan to develop an app for Android.
Not much point now.
Thanks for finding that before i got too far into development!
sounds great, looking forward to it
Other than remote GPS finder, will there be any other special features?
Looks like i won't be continuing, mIQ already have the app i'm creating!
Well don't lose interest just yet. A dedicated solution just for that task, especially one I could host on say my own website would be a much preferred solution for me than yet another social site having access to all my information.
Its a cool idea, but I could see how people would be concerned with privacy. My text messages aren't always PG nor are the discussions always "legal". I personally don't concern myself with privacy anyhow.
Right now I just run MyMobiler and tether the phone to my PC and use the phone GUI with my keyboard. This app/service WOULD be very helpful for people with ridiculously strict IT departments and people who don't use Windows OS on their workstations. I'll definitely check it out when released. Sounds cool.
Eoinoc said:
Well don't lose interest just yet. A dedicated solution just for that task, especially one I could host on say my own website would be a much preferred solution for me than yet another social site having access to all my information.
Click to expand...
Click to collapse
enTRAPAG said:
Its a cool idea, but I could see how people would be concerned with privacy. My text messages aren't always PG nor are the discussions always "legal". I personally don't concern myself with privacy anyhow.
Right now I just run MyMobiler and tether the phone to my PC and use the phone GUI with my keyboard. This app/service WOULD be very helpful for people with ridiculously strict IT departments and people who don't use Windows OS on their workstations. I'll definitely check it out when released. Sounds cool.
Click to expand...
Click to collapse
+1, a server that YOU choose would be fairly better than having to use a common service that would store our data...
The webserver could be our pc, or why not, getting a way to get it working throught a php script that could be hosted on any host we want to
Just my opinion...
[APP - Release] Send SMS from your PC, RELEASED.
Well, you guys are on the exact train i am.
Basically, i was going to host it on my site, and if people were interested, then open it up for registration etc. However, you're right, Privacy was a worry and i'm not sure i like my information being held by someone else, i only just allowe Facebook to.
So, i'll continue, get it polished up, then release a package that people can deploy wherever the hell they want
Hopefully this weekend some time, i would imagine? Busy all week
Cheers guys!
thats the spirit man.. just checked out that other software.. exactly the sort of thing i DIDN'T want.. uninstalled it within 5mins of messing around.
Looking forward to your solution! sounds much more like the sort of thing I would be interested in (and many more im sure)
Anyone think of a good name? :\
Working on it at the moment
japanfred said:
Well, you guys are on the exact train i am.
Basically, i was going to host it on my site, and if people were interested, then open it up for registration etc. However, you're right, Privacy was a worry and i'm not sure i like my information being held by someone else, i only just allowe Facebook to.
So, i'll continue, get it polished up, then release a package that people can deploy wherever the hell they want
Hopefully this weekend some time, i would imagine? Busy all week
Cheers guys!
Click to expand...
Click to collapse
I REALLY like this idea. Please keep me informed!
why not use mymobiler?
inertone said:
why not use mymobiler?
Click to expand...
Click to collapse
Because you need to be able to get to your phone, i.e. ActiveSync or via WiFi.
I don't know about you, but at my place of work, we don't have any drivers installed on the machines to allow us to use USB Devices, other than the keyboard and mouse. And we don't have WiFi that will get us onto the main network. So that option would be out.
Sounds really cool, I'd definitely use it. Right now I just use MyMobiler and just type with my pc keyboard on my phone under the keyboard on ABC. Works fine for me now, but my phone needs to be plugged in if I want to use it.
Hey all,
Thanks for the support, very early release can be found here.
Please can you all try it, let me know how you get on. It's very simple, but it does the trick.
Cheers,
D
Sounds like a good idea, but not sure how many people know this, but as long as you know that format for a carrier you can actually send a message via e-mail to a person's phone as a text.
For Sprint it's <10 digit number>@messaging.sprintpcs.com
for AT&T it's <10 digit number>@txt.att.net and to send MMS to ATT it's @mms.att.net
I have a list of HUNDREDS of the formats somewhere I will post if you all want.
Could you? Would be interesting. Thanks.
Any tried it yet? I've had alot of views and no feedback?
Hullo.
Looking for a little advice from folks about sideloading apks to multiple android devices at once (like, 8 or 9 of em). Searched around the forums a bit and couldn't find anything directly relating to this issue, so I figured I'd ask. I dunno if this belongs more in App development, but its an Android specific issue so...
At present I'm using Test Flight App (I'd post the URL but I'm too much of a noob here) to manage builds and releases. Its really great for getting beta builds out to the studio team, and to various beta testers and potential partners.
However there are a few issues with it, which are particularly problematic for quick iterations etc.
1) Actually downloading the apks is a manual process per device. So if you've a small QA team (or are working solo) it takes alot of time to get the newest build onto everything.
2) Each build has to be uploaded via the Test Flight website, then distributed to users on a build by build basis. This is a difficult to automate process, so makes having any kind of continuous integration system for nightlies etc. difficult at best.
I've been looking into possibly doing something like installing a Dropbox on each device and automating CI builds to a dedicated folder, which is shared via Dropbox to everything, but its a bit of work up front to get it working and I may still have to actually manually install the things each time.
Any of you guys had any experience attempting to do something like this?
Figured I might as well come back and answer my own question incase anyone else was wondering.
Ended up using a USB hub to connect multiple devices then running a script that used ADB to get all attached devices, then passed that list one by one into the adb install function.
Still not ideal, as it requires a wired connection for each phone, but works for now.
Dansixminute said:
Figured I might as well come back and answer my own question incase anyone else was wondering.
Ended up using a USB hub to connect multiple devices then running a script that used ADB to get all attached devices, then passed that list one by one into the adb install function.
Still not ideal, as it requires a wired connection for each phone, but works for now.
Click to expand...
Click to collapse
How about Wireless ADB?
Check ADB Wireless on Play Store. (Unfortunately all phones must be rooted, because it requires ADB port to be set to 5555)
https://play.google.com/store/apps/details?id=com.wave18.adbwireless
I think you are using batch file to get ADB script for all devices.
Press Thanks if helped.
Is there a way to build Themer themes (or even Zooper widgets) on a PC or Mac and export them back out, transfer them to the device and import them into Themer?
I have been trying to build a theme but I keep getting frustrated with how cumbersome it is to use these tools on a touchscreen device. I would be able to create a theme a lot more quickly and efficiently if I could drag elements around with a mouse, type on a physical keyboard and make use of a larger screen with more real estate than my phone. I also think it would be much more precise.
A tool like this would be fairly easy to build. It'd just have to have a few basic options for the device like resolution and dpi and could also have presets so that a designer could select the device he or she is exporting to. This would also be helpful for people who are modifying themes to work with other devices or if users are running their phones with custom DPI settings (I do).
Would anyone else find this useful?
Please forgive me if this has been asked and answered already. I did a bunch of searching and couldn't come up with anything.
Thanks,
Cass
cbarnes913 said:
Is there a way to build Themer themes (or even Zooper widgets) on a PC or Mac and export them back out, transfer them to the device and import them into Themer?
I have been trying to build a theme but I keep getting frustrated with how cumbersome it is to use these tools on a touchscreen device. I would be able to create a theme a lot more quickly and efficiently if I could drag elements around with a mouse, type on a physical keyboard and make use of a larger screen with more real estate than my phone. I also think it would be much more precise.
A tool like this would be fairly easy to build. It'd just have to have a few basic options for the device like resolution and dpi and could also have presets so that a designer could select the device he or she is exporting to. This would also be helpful for people who are modifying themes to work with other devices or if users are running their phones with custom DPI settings (I do).
Would anyone else find this useful?
Please forgive me if this has been asked and answered already. I did a bunch of searching and couldn't come up with anything.
Thanks,
Cass
Click to expand...
Click to collapse
Yes. I second your idea. i did search for theme builder. nothing of that sort. on a different note , i did find an ancient theme builder for ancient symbian phones. i donot know whether to laugh or to cry. LOL
cbarnes913 said:
Is there a way to build Themer themes (or even Zooper widgets) on a PC or Mac and export them back out, transfer them to the device and import them into Themer?
I have been trying to build a theme but I keep getting frustrated with how cumbersome it is to use these tools on a touchscreen device. I would be able to create a theme a lot more quickly and efficiently if I could drag elements around with a mouse, type on a physical keyboard and make use of a larger screen with more real estate than my phone. I also think it would be much more precise.
A tool like this would be fairly easy to build. It'd just have to have a few basic options for the device like resolution and dpi and could also have presets so that a designer could select the device he or she is exporting to. This would also be helpful for people who are modifying themes to work with other devices or if users are running their phones with custom DPI settings (I do).
Would anyone else find this useful?
Please forgive me if this has been asked and answered already. I did a bunch of searching and couldn't come up with anything.
Thanks,
Cass
Click to expand...
Click to collapse
Hi, if you are asking if there is an App to build themes on a PC? If yes then the answer is sadly no.
However there is another option. You can use an Android VM such as GenyMotion. It no longer has Play Store access, so you will need to sideload Themer on it, but it does work well. http://www.genymotion.com/features/
the link doesn't work comes back as nothing found,fortunately this one does work https://cloud.genymotion.com/page/launchpad/download/
you wiull need to register and log in before download
ThemerSupport said:
However there is another option. You can use an Android VM such as GenyMotion. It no longer has Play Store access, so you will need to sideload Themer on it, but it does work well.
Click to expand...
Click to collapse
Yeah, I started to do this but as the performance is fairly bad in emulation, I threw in the towel. If there is enough support, is this something that you guys would be willing to build? It's probably even something that could be built in a web app, meaning you could build it once and be done
The benefit here is that having a tool like this would open the door for a lot more designers. The more great themes you have in Themer the bigger your install base.
Thanks so much for responding so quickly
Edit: I misunderstood. I have tried the emulator provided with the SDK, but I'll give GenyMotion a shot also. Thanks for the suggestion.
cbarnes913 said:
Yeah, I started to do this but as the performance is fairly bad in emulation, I threw in the towel. If there is enough support, is this something that you guys would be willing to build? It's probably even something that could be built in a web app, meaning you could build it once and be done
The benefit here is that having a tool like this would open the door for a lot more designers. The more great themes you have in Themer the bigger your install base.
Thanks so much for responding so quickly
Edit: I misunderstood. I have tried the emulator provided with the SDK, but I'll give GenyMotion a shot also. Thanks for the suggestion.
Click to expand...
Click to collapse
We might have a look at an online version in the future, but that will only be once Themer is a lot more stable and we have more resources to work with. Thanks for the suggestion though!
it could be awesome for pc users
I installed Genymotion. Getting it configured with Themer took some doing, but once it was setup I had everything I needed. Thanks so much for this suggestion.
For those who want to do the same thing, there are some things you need to know. First, you need either a Google account or a Facebook account to log into Themer. That means that after you install GenyMotion, you need to do one of two things: either you need to 1) flash a Google apps package over the GenyMotion VM (a 4.3 apps package that works with Cyanogen mod works best), then log into Google, then update everything with the Play Store, and then install Themer; OR (and I didn't do this, so it might be more complex than this) sideload Facebook and sideload Themer, log into Facebook, then setup Themer.
The reason you need to do this is because in order to use Themer, you need to log in using either a Google account or a Facebook account, and Themer uses a list of accounts already on your phone (or in this case, the VM) to populate the dialog box that asks you to log in. That said, you want to have either a Facebook account or a Google account set up on the device (or VM) prior to launching Themer. Since I'd rather not ever use Facebook to do anything, that limits my option to Google.
It might be the case that if you exported themes from Themer and wanted to import it, that you might not have to go through any of these steps. However, if you want to be able to download existing themes from Themer and work with them as a starting point for building your theme, or even just pick them apart to figure out how they work in order to learn, you need to log in.
Someone correct me if I made this way more complicated than it needed to be.
As for developing a web client for theming, maybe this could be a community-led effort? I don't have the skill or time to do any of it, but if this is a popular request, perhaps we could organize a project and try to contribute to it. Is anyone interested?
Hello, everyone!
If you aren't an expert - that's okay. Everyone is welcome and you're free to ask questions.
Make sure to check the date this post was updated (I may forget to update the date in the title) which is located at the bottom of this post. If this post hasn't been updated in more than a month, contact me and I'll refresh everything.
Quick Introduction:
I'm new to the Yoga Book squad, and I've noticed one major downside.... the forums are a total mess. So what I'm hoping to do, is to keep this thread as up-to-date as possible, with links to guides, development progress and anything else.
I figure to make this more... tidy, I will enforce a colour-coding system for each sub-thread-guide-thingy, so you can instantly tell whether a guide or method to do something to your Yoga Book is risky, and most likely experimental, or is well tested. These will probably be done via experiments on my own Book (the wifi-only version), but of course I will hope via this community thread I will be able to provide more detailed statistics and such as everyone does their own thing to their device.
If you have anything to add to this thread, or would like to help out with anything; please feel free to contact me or just tell me what you're thinking - I'll do my best to read everyone's replies.
General Yoga Book Information
To my knowledge, there are two versions of the Yoga Book, each with two sub-versions for the OS:
1.) YB1-X9aF - this is the Wi-Fi version
2.) YB1-X9aL - this is the LTE/4G version
Where the "a" between the 9 and the F/L is either a zero or a one, depending on the installed OS (Android: 0, Windows 10: 1)
The SIM card is a Nano-SIM with 3G capability.
Other than that, all Yoga Book devices share the following specifications:
- 10.1 inch IPS display, of resolution 1920x1200
- Intel Atom x5-Z8550 processor, which:
----+ Has an architecture of x86_64
----+ Core base clock of 1.44 gigahertz
----+ Core boost clock of 2.4 gigahertz
----+ 4 cores and 4 threads
- Battery capacity of 8500 milliampere hours
- On-board storage of 64 gigabytes of solid-state storage (SSD)
- 4 gigabytes of random-access memory (RAM)
- A microSD card slot capable of up to 128 gigabytes of storage
- Two camera's, one above the display and one on the keyboard
- Wi-Fi (802.11 ac) and Bluetooth (v4)
- 3.5 millimetre headphone jack
- Micro-USB 2.0 OTG port
- Micro-HDMI port
Colour (or color) Codes and Tags:
For those who like using grey-scale display filters or whom are colour blind, I've added a "level" to each of them, where level 3 is like... crazy meltdown experimentation mode, and 1 is stable-ish (probably as stable as it'll get unless a REAL developer takes on the challenge).
[X] - Means that you will have to delete some or all of your data for it to work
[R] - Means that it requires a Rooted device
[Level 3] VERY EXPERIMENTAL - Use with caution, and with the knowledge that you may boot-loop, brick your device or lose your data!!! OR ALL OF THOSE THINGS!! Make sure to backup everything you hold dear, and just for good measure you'll have something to fallback on.
[Level 2] NOT WELL-TESTED - This will probably work for most people, but things may be unstable at the best of times. Again, make sure you have a backup before trying level 2 items.
[Level 1] 99% FINE - If there's an issue, it's probably your own fault... but again, I can't guarantee that everything I or anyone else does is perfect and will work for everyone! You should probably still have a backup, but if you're lazy like myself it's okay, I forgive you.
Android M/6.0
Rooting, backups, and more!
[1][X] Unlocking the Bootloader
earthCallingAngela wrote a really nice guide for unlocking the bootloader. The original thread is here, but for those who are too lazy to open the link in a new tab I've quoted the information.
IF YOU APPRECIATE THEIR EFFORTS GO AND THANK THEIR ORIGINAL POST!!!
Remember, unlocking your devices bootloader will format your storage (meaning you'll lose all of your data), so backup anything important before proceeding.
earthCallingAngela's OP: https://forum.xda-developers.com/yoga-book/how-to/how-to-unlock-bootloader-t3502216
I hope this is useful information. It took me a bit to figure it out due to a lot of conflicting information, since the procedure has changed, perhaps several times, since the first version of Android. Also, I'll probably forget myself.
Please note that I've performed these steps on Linux (Specifically Arch Linux). Others have pointed out that if you have issues executing step 7 from Windows, you may need to follow this post.
1. Install Android Studio, or otherwise obtain the latest versions of the adb and fastboot programs. I think Windows users also need to install a USB driver, but I run Linux, so I am not sure about that procedure.
2. Gain access to the developer options on the tablet. Go to the settings, and find the "about tablet" section. Scroll down to the "Software version" section and tap on that several times until it says that you are now a developer. Feel special.
3. Go to the new "Developer options" setting. Select "OEM unlocking." Also, I selected "USB debugging" as a straightforward way to reboot into the boot loader.
4. Connect to the computer on which you've installed adb and fastboot.
5. Type 'adb devices' to see your device listed. The tablet will ask you if you're sure you want to allow the computer access to it. Answer in the affirmative, and save that option.
6. Type 'adb reboot-bootloader' to do just that.
7. After you see the innards of your 'droid, type 'fastboot flashing unlock' . On Linux, you may need root permissions to do this. The tablet will ask you to confirm (select with up/down volume, and accept with the power button), and will then erase all of your data! I didn't worry about this as I'm all on Google services, and so they can be restored easily enough.
Click to expand...
Click to collapse
[3] TWRP Custom Recovery
danjac has written a post about his attempt at getting a modified version of TWRP running on his Yoga Book. From what I can tell it was a success, besides a few bugs (which are avoidable... I think).
WARNING! MAKE SURE YOU READ THESE!!
Before you go ahead and just flash his version, make sure you know the consequences that could arise if something goes wrong. If the recovery of your device screws up, you don't really have much to bring it back to life with. Even though there shouldn't be many things to worry about, it's still very risky.
In fact, it is recommended you ONLY temporarily boot into TWRP, instead of just flashing it like you would on another device. danjac's OP gives more information for you to use.
If you think you are willing to take the risk and know what you're doing, I highly suggest you make a complete backup of your device if possible. So far there isn't really a way to get your stock recovery back (since we don't have a custom ROM or a way to download Lenovo's modified version online).
danjac's OP: https://forum.xda-developers.com/yoga-book/development/recovery-twrp-t3533980
[2] Rooting (via Magisk)
danjac wrote the first guide to rooting the Yoga Book, and you should, again, go and thank his original post. However, his OP is now a bit outdated, Magisk (currently v12.0) now includes a root module (MagiskSU) based on phh's SuperUser.
Please note: If you are already rooted via a different method (and maybe you want to change because it didn't work... or something like that) you have to go into your super-user manager and uninstall it. If you have a previous version of Magisk installed, there is an uninstall ZIP that you can flash, which will remove any Magisk version, including MagiskSU. Again, more details on the main Magisk thread.
Do I NEED to unlock my bootloader to Root my device?
The short answer is yes, and the long answer is sort-of. You only need to unlock your bootloader if your ROM doesn't support Rooting out-of-the-box (which in Lenovo's case, it isn't supported). However, you can lock your bootloader afterwards if it's such a concern to you. Yeah, you probably will stop receiving over-the-air updates from Lenovo, but they're probably not going to push out another update for a long while, so in my opinion it's nothing to worry about.
Follow the instructions on the main Magisk page to install it if you're new to Magisk, but if you know a thing or two then I'll paraphrase:
- Flash the latest Magisk ZIP file via the TWRP Recovery (if you have it) or just flash it over ADB
- You should also download the Magisk Manager from the Play Store to make sure you're always up-to-date
danjac's OT: https://forum.xda-developers.com/yoga-book/how-to/root-yb1-x90l-how-to-t3534268
Magisk's main thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
[2] Dual-booting Android and Windows 10
Since there isn't a place to get the Android side of things, I won't put too much info here.
Although if you're already running the Android version and want to know how to put Windows 10 on your device too, look at this thread.
Dual-booting OT: https://forum.xda-developers.com/yoga-book/help/android-to-windows-hack-dual-boot-option-t3475733
[3][X] Custom ROM
Currently there is no custom ROM which supports the Yoga Book, mainly for the simple fact not many people own the device. However, if we make enough noise in the community I'm sure someone will crack under the pressure ;P
Although, I'm doing my best efforts to merge the device drivers and such into the Android Source code, but you shouldn't get your hopes up. If I ever get it working, it will probably be unstable and not that great (I don't have much experience with the details of the Android OS), I'm running off my knowledge of the Linux OS.
If you're using the Windows 10 version of the Yoga Book (I'm sorry you paid the extra $50!!), hopefully Lenovo will at least release a version of their own ROM soon (or put it back from what I've heard). I've also heard that they're upgrading to Nougat in October (of 2017)... so we've got plenty of time to find another solution to our sorrows.
Information for Developers:
Someone has also posted a backup of their working Lenovo-customised Android OS, but I won't post a link here because:
- It's only a backup
- May draw un-wanted attention to the link
But if you're a developer and you think that will help you, you can easily find it somewhere in these forums.
EDIT: The link has now been removed (I can't find it)
If you're trying to
Code:
repo sync
the AOSP and you're getting stuck syncing the work tree, try doing this (from the folder you're trying to sync to):
Code:
rm -rf frameworks/compile/slang/
mkdir /home/<user>/slang_helper
sudo ln -s /home/<user>/slang_helper frameworks/compile/slang
Please be careful when typing commands into your terminal, especially from the internet, and especially when you don't understand what the commands are doing.
Lenovo's source code download: http://pcsupport.lenovo.com/au/en/products/tablets/yoga-series/yoga-book/za0v/downloads
[2] Linux without removing Android
Thanks to @Tiggi2017 for making the first guide. His OT here is a good one to read through if you're interested in this.
Via a few apps and some commands, you're able to have a "Linux" OS running on your Android device with the Halo Keyboard and such still working perfectly.
His original method doesn't need Root access apparently. However, there are other methods that may be easier for some people if they have a Rooted device. Look through the comments in that thread for more information.
OT: https://forum.xda-developers.com/yoga-book/how-to/yoga-book-gnuroot-debian-t3580358
Apps, tips and tricks!
[1] Apps That Support Multi-Window
Thanks to sashlon1138 for doing most of the hard work by putting this list together (may not be complete, if you know of more apps that work let me know so I can add them!).
Thanks to uuang for getting the ball rolling.
Thanks to Csilla4 for finding the first calculator app that works.
Thanks to docoli for also finding a huge list of compatible apps.
Csilla4:
- iDo Calculator
uuang:
- RAR
- Google Photos
sashlon1138:
- Chrome (but not beta)
- Facebook
- Messenger (Facebook)
- Gmail
- Outlook
- Youtube
- VLC
- Google Search
- Home
- Instagram
- Pinterest
- Dolphin Browser
- Ebay
- Paypal
- Flow Free
- Google Maps
- Google Earth
- OneNote
- Wikipedia
- ES File Manager
- Twitter
- Evernote
- Reddit
- Skype
- Candy Crush Saga
- Candy Crush Soda
- Candy Crush Jelly
- Spotify
- Soundcloud
- Opera
- Opera Mini
- Yahoo Mail
- Viber Messenger
- MX Player
- Google Translate
- Shazam
- AliExpress
- Tumblr
- Twitch
- Mega
docoli:
- Microsoft Word, Excel and Powerpoint
- Softmaker Textmaker HD, Planmaker HD and Presentations HD
- RealCalc
- Adobe Acrobat
- CamScanner
- MindjetMaps
- LinkedIn
- ezPDF Reader
- Detexify
- HERE WeGo
- Google Street View
- Öffi (German Public Transportation Schedule app)
- DB Navigator (German Railroad Schedule app)
- Kindle
- Amazon Prime Video
- Maxdome
- Barnes & Noble Nook
- Audible
- TuneIn Radio
- TED
- Babbel
- dict.cc. plus
- Amazon
- Nine (you can even have any number of items in parallel on the screen, e.g., inbox, calender, contacts, notes)
- OneDrive
Link to OT: https://forum.xda-developers.com/yoga-book/help/multi-window-apps-t3565253/post71494066#post71494066
[2] Changing the DPI
WARNING! Do not change your DPI to extreme values! You may render your device useless (unless you already have set up ADB and know how to revert the changes)!
Thanks to melando for bringing up the actual default DPI values.
Just so you are aware, if you're running Android 7 (Nougat) or later, you can adjust the "DPI" to some preset values from the settings app.
Using this site, I calculated that the Yoga Book has a technical DPI of 224 pixels per inch, with a resolution of 1920 by 1200 pixels, over a 10.1" screen (diagonal). However, the default Lenovo has set it to may be actually 280. They suggest that you may find it better if the DPI is set to 240.
This is a trivial modification if your device is Rooted. All you have to do is open the Play Store, and search for something along the lines of "DPI changer", and find an app that has good reviews.
An example app would be "Easy DPI Changer [Root]"
If your device does not have Root, then you will have to have a computer with ADB installed.
To install ADB, do a quick Google. There's bound to be a guide there somewhere (I'll put one here soon).
Once you have ADB installed, you can follow this easy guide to change your DPI to whatever you like.
DPI Calculator: http://dpi.lv/
Non-Root Method: http://www.androidbeat.com/2015/07/how-to-change-dpi-of-android-device-without-root/
[1] Recommended Apps...?
There isn't anything here as of yet, because I haven't gotten far enough to look for any good apps that work well with the Yoga Book. So right now I'm going to rely on everyone else for that. I'll get there eventually.
However, you should at least download Magisk Manager from the Play Store, to manage your Root and other neato Magisk features.
If you're a developer, and need guinea pigs to test your stuff on, I am happy to help anyway I can (and I'm sure much of the community is too).
If anyone needs help, I'll do my best to assist, but if it's anything too tedious (such as teaching you how TWRP works or something along those lines), you should probably have a look on the internet for tutorials and guides for that stuff. There are plenty of people out there who can explain concepts better than myself.
Windows 10
Simple customisations!
[1] Touch-pad Customiser
This program was first put into the spotlight by dinosauria123, so go to their original post and thank them for finding this.
This small program lets you modify some simple variables associated with your touch pad, only requiring a reboot after you change something.
Features:
- Setting extended right click area
- Setting unlock area
- Setting mouse pointer acceleration
- Setting scroll direction
- Disable Touchpad clicking (added in version 1.4)
Click to expand...
Click to collapse
OT: https://forum.xda-developers.com/yoga-book/themes/yoga-book-touch-pad-setting-application-t3569836
[1] Minor Halo KB Customisations
If you were wondering if there was a simple and easy way to lower the brightness of the Halo Keyboard, or just get rid of those pesky battery-draining touch vibrations for every key press, there is a way!!
Best of all, you don't have to download it! It's already installed!!
To find this not-so-well-hidden app, you have to either go to your Program Files, or open the good-old Control Panel (thanks to urayandro for pointing out that it's in the Control Panel!).
Control Panel method: Once you're in the Control Panel, just click on "Appearance and Personalisation", and you will find the "Halo Keyboard" program right at the bottom.
Program Files method: For 99.9% of people this is on your Local Drive (C: ). It may be located in your normal Program Files or it may be in your x86 Program Files, I'm assuming it depends on whether you're using the Windows 10 your device originally came with, or you have re-installed it (thanks to sawyerbenjamin for informing me that for them, it was in the normal Program Files folder). Assuming it's in your normal program files; go to Program Files/Lenovo/ and there it is. The application name is "ControlApp.exe". You can also make a shortcut to this application - I put a shortcut on my Desktop.
It allows you to:
- Toggle the touch tone/sound
- Toggle the vibration on keypress
- Adjust the time it takes for the keyboard lights to turn off
- Adjust the backlight (or whatever that is called) brightness for the whole keyboard
Risky or experimental customisations!
[2] Using AMIDuOS (Android Emu)
Update: I've spent a bit of time trying to use this, and in my opinion it's not worth the time. But if you need a development environment for something, it's pretty good at that. :/
In my attempt at replacing my Windows 10 installation with any version of Android I could find, I ran across this program called AMIDuOS. It's similar to emulating an Android system while you're in Windows, but instead of running it in a virtual environment, it runs directly on your x86 hardware (which is what the Yoga Book uses).
If you're cool with having a Windows 10 version of the Yoga Book, but still want to use some Android applications (possibly for drawing, or maybe just because the Android ecosystem is miles better compared to the Windows one) this may be a good solution for you.
Currently, they support Lollipop and Jellybean (not Marshmallow). However, this program is not free. You can trial it for free though. I'm fairly certain the full price is $10 USD.
It's not a difficult thing to set up (apparently), so if you wanna try something out and know how to deal with possible emulation problems (although unlikely) it may be worth it.
AMIDuOS Website: http://www.amiduos.com/
[2] Process Lasso
Huh? Process what-now? Yep, Process Lasso is a very complex program filled to the brim with algorithms tailored mainly towards getting the best performance and responsiveness, and to control those pesky rogue background processes that slow down your device when you don't need them to.
This program is completely free (but it does have a Pro version if you want a few extra customisation's and want to support the developers) and I've found it works pretty well, especially with a low-power device like the Yoga Book.
Since the Yoga Book is meant to be a very portable device, I'm not using Process Lasso to get maximum performance (as that would obviously drain the battery life quickly), I'm using it to make sure that if there's a program that needs to use power and deplete my battery life, then it's something I want - not some dodgy Windows background processes or other stuff like that.
It's pretty easy to set up. I've got a few of the main features enabled, and I recommend that you use similar settings.
I've enabled:
- ProBalance; this will keep the background processes in check, and allow the foreground processes to take the reigns of your CPU, insuring you experience minimal stutters.
- SmartTrim; this is an optional one, since I'm constantly micro-managing the applications I've got installed on my 64GB internal drive, this should help to prolong the performance of my drive, making sure it's well pruned (that's a pretty good analogy actually)
I've turned off the tray-icon showing me the CPU utilisation, so that doesn't need to waste any of my precious battery life (I'm usually a battery-life extremest), but you don't need to do that.
So if you're experiencing major delays when just doing simple things like moving around the Windows 10 user interface due to rogue background processes, I highly recommend you give this program a try.
Also, if you're a pro-ish-user like myself, feel free to dive deeper into the program. It's filled with toggles and adjustable's for you to play with and tailor the program to your needs, and almost everything you can change is accompanied with a tool-tip explaining what it does. Enjoy! But of course, as always, be careful of what you change - there are some things that could make your system really slow and or unstable.
P.S. The Yoga Book uses the 64-bit system, so choose that version of the program.
Website: https://bitsum.com/
Reserved
Does anybody know, whether bootloader unlocking is necessary for magisk root?
Con_Sole said:
Does anybody know, whether bootloader unlocking is necessary for magisk root?
Click to expand...
Click to collapse
I'm not entirely sure, however flashing something to your device (via TWRP at least) does require an unlocked bootloader. So without an unlocked bootloader, I don't think there's a way to install MagiskSU. Sorry about that... :/
I will have a look around and see what I can find, though.
Con_Sole said:
Does anybody know, whether bootloader unlocking is necessary for magisk root?
Click to expand...
Click to collapse
So I've done more looking around and here is your answer: Yyyyeeeeaaaahhhhhh......?
Magisk itself does not require an unlocked bootloader, however, it does require root access. Usually to get root access you need to unlock your bootloader, unless it comes already rooted in a custom ROM (but in our case, it doesn't). Unlocking the bootloader is a relatively safe procedure to perform, so [in my opinion] you shouldn't have anything to worry about!
nan0s7 said:
[1] Minor Halo KB Customisations
If you were wondering if there was a simple and easy way to lower the brightness of the Halo Keyboard, or just get rid of those pesky battery-draining touch vibrations for every key press, there is a way!!
Best of all, you don't have to download it! It's already installed!!
To find this not-so-well-hidden app, you have to go to your Program Files. For 99.9% of people this is on your Local Drive (C. So to get to it, go to Program Files (x86)/Lenovo/ and there it is. Its very helpful and informative name is ControlApp.exe.
It allows you to:
- Toggle the touch tone/sound
- Toggle the vibration on keypress
- Adjust the time it takes for the keyboard lights to turn off
- Adjust the backlight (or whatever that is called) brightness for the whole keyboard
Click to expand...
Click to collapse
it's not not-so-well-hidden app.... it's not hidden at all. you can found it under "appearance and personalization" section of retro control panel.
urayandro said:
it's not not-so-well-hidden app.... it's not hidden at all. you can found it under "appearance and personalization" section of retro control panel.
Click to expand...
Click to collapse
Indeed it is! Consider that noted ;P
urayandro said:
it's not not-so-well-hidden app.... it's not hidden at all. you can found it under "appearance and personalization" section of retro control panel.
Click to expand...
Click to collapse
I found it in my normal Program Files folder. (x86) only contained a folder for LenovoPaper.
sawyerbenjamin said:
I found it in my normal Program Files folder. (x86) only contained a folder for LenovoPaper.
Click to expand...
Click to collapse
Huh, well it must depend on whether you kept the original installation of Windows that came on the device, or whether you reinstalled it (or came from Android). I'll add that information. Thanks!
sawyerbenjamin said:
I found it in my normal Program Files folder. (x86) only contained a folder for LenovoPaper.
Click to expand...
Click to collapse
Same here. In my device is also only contain LenovoPaper under \Program Files (x86)\LenovoPaper
What i mean with retro control panel is old window's control panel. not the win10 setting. You can access it by:
1. Click start and type "control panel" then press enter.
2. You should see control panel window that similar to older version of windows.
3. Go to "Appearance and Personalization
4. Under there you should see "HaloKeyboard" shortcut.
You can also create another shortcut of this app by right-clicking it then choose create shortcut. Windows will make another shortcut on the desktop. I did this to get easier access when need to adjust keyboard brightness.
Hey there,
i think there is a way to flash the win 10 image on my yb1-x90f. just don't wont to brick it and so i have a few questions to all of you experts. in other words, i need your help
there is a quide i found in internet, which i think could work. But there are words i've never read before like "RUSB". is this an important word? i attached as low quality pdf...
there is also the win 10 image online. but we have to pay for it because it's "exclusive" stuff. 50$
maybe we can put together, 50/50 so its 25$ for me and you?
i think you know which page is meant. if not pm me
like descriped in the guide, (part 3) we have to select "Boot Menu" and after that "EFI USB Device"
But my bootloader looks different (android version).
is there a way to flash the image via original android bootloader/recovery or do we need to find a way to get into the other bootloader?
in this post: https://forum.xda-developers.com/yoga-book/help/bricked-yoga-book-yb1-x90l-t3537048
@mmusaad managed to get into this kind of "mode" but i think its a dangerous way and he had a big luck to "unbrick" his device. maybe onyone find an easy way to go into this "windows bootloader" or whatever?
so maybe we can work togehter
woodirk said:
there is also the win 10 image online. but we have to pay for it because it's "exclusive" stuff. 50$
Click to expand...
Click to collapse
Probably wrong translation from Chinese... Should read USB-R. There are USB Ports which don't support remote drives
woodirk said:
there is also the win 10 image online. but we have to pay for it because it's "exclusive" stuff. 50$
Click to expand...
Click to collapse
Windows was never free, that's why the Windows Yoga Book is $50 more expensive. A Win-Image will not help you either, as Lenovo brands the Product Key into the Bios.
jamespmi said:
Windows was never free, that's why the Windows Yoga Book is $50 more expensive. A Win-Image will not help you either, as Lenovo brands the Product Key into the Bios.
Click to expand...
Click to collapse
OMG sometimes i think "together" :highfive: is a heavy word... :crying:
what about this ? (see attachement)
and stop letting me look like an idiot...
I'm on the YB1-X91F, which is the Windows version. Unfortunately for us, the Android and Windows versions of the Yoga Book have totally different BIOS's. This is the main thing stopping us from being able to dual-boot.
Easy-firmware has both the Android and Windows' ROM's, but they only provide instructions on how to overwrite the current operating system, not the opposite ones. I have downloaded everything they have on the Android side of things, and everything except the Windows ROM on the Windows side.
While I was messing around with my device, I did brick it. But I was able to get an SD-card with a Windows bootable "USB" install on it, and went through the installation process on my external keyboard. Then from there was able to install the drivers and restore the Windows version with everything working after a bit of time. I don't know how different this would be if you don't mind getting rid of the Android bootloader totally, but that's not really recommended.
What we'd need for getting Android alongside the Windows version is a way to get a working Fastboot/ADB connection.
For the Android version getting Windows alongside it, you need a way to get the Android bootloader to point to and recognise the Windows installation. However, this is almost impossible unless you have a custom ROM, which we do not have that supports the Yoga Book. You could probably delete Android totally, and then install Windows from there, but I'm not 100% sure because I haven't messed around with the Android version of the tablet.
We'd need a way to get the Android BIOS and Fastboot off of it so we can then use it to our advantage.
nan0s7 said:
I have downloaded everything they have on the Android side of things, and everything except the Windows ROM on the Windows side.
Click to expand...
Click to collapse
that's good to know...
nan0s7 said:
You could probably delete Android totally, and then install Windows from there, but I'm not 100% sure because I haven't messed around with the Android version of the tablet.
Click to expand...
Click to collapse
this is exactly what i want to do and where i need your help
imo this will help us https://forum.xda-developers.com/showpost.php?p=70540959&postcount=7
woodirk said:
what about this ? (see attachement)
Click to expand...
Click to collapse
That probably flashes a valid Serial Number into the Bios...
DPI settings
I believe default DPI may actually be 280 - there's a Lenovo forum thread recommending setting it to 240 which I have found reduces the size of icons etc. so 224 does not seem right
melando said:
I believe default DPI may actually be 280 - there's a Lenovo forum thread recommending setting it to 240 which I have found reduces the size of icons etc. so 224 does not seem right
Click to expand...
Click to collapse
Thanks for the information! I've added a bit to the DPI section about the other values.
nan0s7 said:
Thanks for the information! I've added a bit to the DPI section about the other values.
Click to expand...
Click to collapse
However now that the Nougat update is out some adjustments can be made in Display Settings...
melando said:
However now that the Nougat update is out some adjustments can be made in Display Settings...
Click to expand...
Click to collapse
Oh yeah forgot that happened (I'm on the Windows version). Fixed it now!