[DISCUSSION][ROM] HTC Sense 2.1 Port to P500 By samrox144 - Optimus One, P500, V General

So I start a Discussion thread for samrox144's port of HTC Sense to P500 on his request.
Link to the Development Thread:
SENSE 2.1 Port Of HTC Hero: G2 Touch--LG P500
Currently known bugs as of 11/02/2012
Data does'nt work- APN Problem
Loudspeaker Volume is bit Low
WiFi doesnt work
Video Player shows White Screen- *Temporary Fix- Use 3rd-Party Video Player*
Camera
GPS
FM Radio- Works but no Audio
Brightness Levels get auto-reset
Allow installation of Unknown apps gets disabled on its own
FAQ's
Q: I flashed this ROM and its taking ages to boot!
A: First boot will take a few minutes, don't panic.
Q: I am not able to install any apps! Halp meh! Also, the Brightness is too Bright/Dark?
A: After the First the boot you need to enable Unknown Sources and adjust the Brightness levels and reboot to recovery, or it will wont get Enabled and you cant install any apps.
HOW TO FLASH:
1.Copy ZIP to SD Card
2.Reboot to Recovery
3.Wipe Data, SDext and cache.
4.Format System
5.Flash
6.Reboot
More FAQ's shall be added soon..
if the rom gets stuck or logo while after reboot from recovery just pull the battery and start it will boot up

*Reserved for Further Use*

sense
amazing
i will use as soon as wifi and unknown sources gets working

opera38205 said:
amazing
i will use as soon as wifi and unknown sources gets working
Click to expand...
Click to collapse
unknown sources is working it wont work at first boot ...
after first boot enable unknown source and reboot recovery ....
now reboot system again it will be working now
this happens because of defualtsettings.xml in system/etc

the problem is not APN, but baseband (I think).
Did he use the baseband fix or old sources?
Greets!

mDroidd said:
the problem is not APN, but baseband (I think).
Did he use the baseband fix or old sources?
Greets!
Click to expand...
Click to collapse
i have used the new baseband fix by mik and also the new baseband fix of adfad
i have used the sources of lupohrip
https://github.com/lupohirp/LG-P500-ICS-Device-Folder/blob/master/device_thunderg.mk#L181

Heard it is too smooth, but this is because it is sense... what about gaming?? And battery?
Sent from my LG-P500

Hi there! ROM looks awful, but I've found another problem. After flashing, and booting first time, gsm network doesn't worked. I've thought, that after quick setup, pin code request page will be shown, but not. Tried to restart phone, but still no gsm, cause no pin code request page again.

azur3orion said:
Hi there! ROM looks awful, but I've found another problem. After flashing, and booting first time, gsm network doesn't worked. I've thought, that after quick setup, pin code request page will be shown, but not. Tried to restart phone, but still no gsm, cause no pin code request page again.
Click to expand...
Click to collapse
"ROM looks awful"? That's very nice of you to say (me being a fan of the sense ui)
This rom uses the new baseband. If you do not know what it is, you probably have the old baseband.

Maybe if I understand baseband differences between stock froyo and stock gb, and I've flashed cm7 nightlies over v20g, and nightlies worked, sense port should worked too.
Sent from my LG-P500 using xda premium

azur3orion said:
Maybe if I understand baseband differences between stock froyo and stock gb, and I've flashed cm7 nightlies over v20g, and nightlies worked, sense port should worked too.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes it will work...
Sent from my iPad 3 using XDA App

Tried to re flash again, still no pin code request.
Sent from my LG-P500 using xda premium

azur3orion said:
Tried to re flash again, still no pin code request.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
You might wanna ask sam, he'l know it better...
Sent from my iPad 3 using XDA App

RockR172 said:
You might wanna ask sam, he'l know it better...
Sent from my iPad 3 using XDA App
Click to expand...
Click to collapse
did you try add the pin in settings>security>sim lock

samrox144 said:
did you try add the pin in settings>security>sim lock
Click to expand...
Click to collapse
Tried, no success, also can't untick sim pin lock.
Sent from my LG-P500 using xda premium

sim card problem
That problem with the sim card its similar to one that cm7 nightlies and luporhip's cm9 had a while ago, i think they have fixed it, why don't you ask on cm7 nightlies or cm9 threads? probably they can help

samrox144 said:
i have used the new baseband fix by mik and also the new baseband fix of adfad
i have used the sources of lupohrip
https://github.com/lupohirp/LG-P500-ICS-Device-Folder/blob/master/device_thunderg.mk#L181
Click to expand...
Click to collapse
Owhhh
That is the problem!! They dont work.
Greets
____________
mDroid - Tapatalk
Phone: LG-P500
ROM: Nitrogen.
Kernel: franco .35
Theme: ICS (by me)
Tweaks: ALL (knzo)
Wishlist: Galaxy Nexus

bug
wifi and microphone please...

Some bugs that i found out
First of all i have to say that this rom looks amazing. the text is crisp and clear and is very smooth but there are lots of bugs in this rom.
Following is the list of the bugs :
1) As reported the camera and wifi does not work.
2) the phone takes a lot of time to boot. (i know the first boot takes a little time but even after that it takes more than needed time to bootup)
3) When your phone is locked and you press any hardware button to turn on the screen,the screen goes black and it's only when you touch the screen the lock screen shows up.
4) Also none of the hardware buttons have backlight when pressed.
5) The microphone does not work as well.
6) whatever settings are made it reverts back to what it was before. for example if you chance the brightness or set any ringtone or make other changes it reverts back to what it was before.
7) Also the date and time does not change even when you try to change it.
I have faith in the developer and i know soon a stable version of this rom will be out.
Thank you.

Nice work..when will you update it..I love HTC sense ui
Sent from my LG-P500 using Tapatalk

Related

[ROM][MAY 22] MOVIESTAR FROYO MIUI another x10project

I didn't want to leave this project unfinished so I decided to finish it up. This is the froyo ui moviestar mod ported to our lovely x10 devices. This rom is slender, beautiful, and fast. It uses go launcher as an option and has market installed so you can download what ever apps you need. I also put busy box and su in xbin and installed the latest recovery. This rom runs on baseband 49 and 52 but you can use cobrato's baseband change zip to change the rom to match the kernel on your phone. Although I had everything but camera working on the rom, I didn't want to spend to long on it. So I did use some of cobratos files (ramdisk, init.d) and of course the great z and j's core files to port and bring this file to you. ​
1. first download rom here (please do not mirror)
updated rom do not wipe cache, data, and dalvik if you are updating.. Only wipe if you are doing fresh install.
UImoviestarMIUIb.zip.html
2. then make sure you have recovery menu installed
3. wipe cache, wipe data, wipe dalvik (in recovery)
4. install through recovery and reboot
5. wait for it to reboot or use dev tools to crash the system server
6. use and report happiness or bugs​
May 22 changelog
fixed app install issue
added spare parts 4
Thanks! was waiting for this
great can't wait but what's the difference between these 3 versions?
Thank you for filling in my request, you are the best!!!
riginal said:
great can't wait but what's the difference between these 3 versions?
Click to expand...
Click to collapse
looks, lockscreens, tweaks, programs, and different user experience. if anyone could do screen shots for me that would be sweet. I don't have much time left this weekend so won't be able to upgrade posts after the links are available.
Files uploaded....
Enjoy
More info on each different mod:
FormelsMIUI: http://miui.android-roms.de/customroms/nexus-one/formels-miui/
MovieStarMIUI: http://forum.xda-developers.com/showthread.php?t=845134
RodriguezsStyle Mod: http://forum.xda-developers.com/showthread.php?t=799737
formels rom works fine with bb52 using wolfbreaks baseband patch
Edit has become a Tad bit unstable or Mabey just is reboots if I'm doing to much at once and if I unplug my charger
Bad download link go to next post
rtblittlebrown said:
formels rom works fine with bb52 using wolfbreaks baseband patch
Click to expand...
Click to collapse
Broken upload, just use his official link:
http://www.mediafire.com/?1kh3i2hb8cu80qb
thank you!! )
Never stops rebooting for me
Dude!!!! Awesome!!!! Got bband 58 ready to flash, wanting to try sumthin new!!! Thank you!!! Will advise!!!! Did you put the dev tool app in the roms to crash system server for bad behavior???
Sent from my X10 using XDA Premium App
bsutton said:
Never stops rebooting for me
Click to expand...
Click to collapse
Wichita rom .. Wich baseband... used each rom on my phone for a day...
Sent from my X10i using XDA App
Same, never stops rebooting for me, I'm using the FormelMIUI ROM with baseband .55, fixing the permissions solved some of the reboots, but they still exist. After a few minutes, the phones becomes unresponsive, and the screen shuts off, without rebooting though. I have to manually remove the battery to restart the phone.
Umm ... it's buggy... but i like it.
I can not apply any other Themes.
Display Brightness only works on MIUI Formels
cruzin_cruzing said:
Same, never stops rebooting for me, I'm using the FormelMIUI ROM with baseband .55, fixing the permissions solved some of the reboots, but they still exist. After a few minutes, the phones becomes unresponsive, and the screen shuts off, without rebooting though. I have to manually remove the battery to restart the phone.
Click to expand...
Click to collapse
Same EXACT problem for me. Baseband .54, too.
Love your work! Thks Dude!!!
Any screen shots ?
Sent from my X10i using XDA Premium App
when i download womethink it reboots ... is there any isue ?
hi dude, thanks for the nice work you`ve done
Problem I have is theme changing. It seems need a bit o work. tried 5-6 theme but still have the same theme.

[DISCUSSION][UPD 28/11 FAQ] Andy's PHOENIX (ICS 4.0.1/GB 2.3.4)

This discussion thread for Andy's Rom which last updated on 20 October 2011
Q. When will the next update comes??
A. No ETAs confirm, but this is his proof something for u.
Q. Will there will be ICS Phoenix??
A. Read this.
andy572 said:
Currently i'm developing on ICS.
next release i dont know if its a gingerbread or ics - depends on working progress.
even i dont know if i'm stoping to develop on P500, i own these device all the time
and never sale it but its time for new things to learn for me.
Click to expand...
Click to collapse
Ask any question u want but please dont spam this thread with nonsense...
ASK ANY RELATED QUESTIONS ONLY!
FREQUENTLY ASKED QUESTIONS!!! (Press thanks if this helps!)
Q. Which Recovery can i flash with?
A. TWRP (Team Win Recovery), Clockworkmod and AmonRA
Q. Can i use this ROM with the latest baseband?
A. No!!! If you want full data use ONLY old baseband... To flash it, go here: http://forum.xda-developers.com/showthread.php?t=1149530 or here: (FOR PICTURE GUIDE) http://forum.xda-developers.com/showthread.php?t=1217504
Q. Why i having battery drains?
A. If you want save your battery, dunt use the phone... JOKE! Lower down your brightness and use the data/3G/WIFI whenever when you wanna use... And being a portable charger which you can use... Eg. MILI Portable Charger...
Q. Where can i get back CM stuffs?
A. Andy has actually modified the code in the second released, so his has modified it and T-Mobile theme chooser wont work anymore.
Q. Can i boost my RAM or Memory? How?
A. Follow this thread... CLICK HERE!!!
For fast Multitasking, use RAM Manager by Juwe11
Q. ****! I somehow stuck on 2nd LG Logo!! How?
A. Try reflashing first, if the problem persist again, comment here and try to produce logcat and devs can help.
Q. Wifi doesn't work! How?
A. Use the Latest Franco.kernel .35 included (Latest is v1.2-12112011)
Q. I'm using old baseband, but mobile data doesn't work!
A. Go to Settings>Wireless&Networks>Mobile networks>Access Point Names. If empty, your APN isn't included in the apns-conf.xml file (it's a known issue). Input the APN manually. OR Since u have CM7, flash it over... It will work...
Q. What is the solution to Tethering??
A. Use Wifi Tether (available in Market)
Q. Can i flash this over mik's CM7 or Neojn's (Knzo) Void.Forever?
A. Yes (Tested by me)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
LAST QUESTION ABOVE THIS... READ THIS!!!
andy572 said:
You have to wipe ALL:
- if your new rom version is different from previous, even gingerbread gingerbread, as example you change from 2.3.3 to 2.3.4 or to 2.3.5
- if youre coming from froyo and go to gingerbread or vice versa
You have to wipe cache/dalvik only
- if you change between same versions of gingerbread, as example you're coming from 2.3.4 and switch to another 2.3.4
You have to wipe even ALL
- if you're coming from mik's 2.3.x or any another rom and would like to change to Andy's Phoenix 2.3.4 because it's different API code
Click to expand...
Click to collapse
Any More Questions? Comment Here! We will help you asap! 80% Gurantee!!! Further question or bugs, Go Here
Download Link: Here!
Official Phoenix Website, www.phoenix-android.com​
where's it?
royal.tarun said:
where's it?
Click to expand...
Click to collapse
Out sooner or later...
Sent from my LG-P500 using Tapatalk
i thought it was released already. It was meant to be tomorrow.
Pixelization problem in andy's rom
I can't post in the dev section but reading the comments and seeing the screenshots, I just wonder if the pixelization is related to a compression algorithm
that is implemented in the rom.
Just wanted to see how my signature looks. Ignore this post.
dhruv.always said:
Just wanted to see how my signature looks. Ignore this post.
Click to expand...
Click to collapse
this is not the thread to do such a thing. if you want to preview your signature do it in the user cp
Sent from my LG-P500 using xda premium
bababasa said:
I can't post in the dev section but reading the comments and seeing the screenshots, I just wonder if the pixelization is related to a compression algorithm
that is implemented in the rom.
Click to expand...
Click to collapse
I posted in that thread for you. I hope you don't mind
Sent from my LG-P500 using xda premium
my weekend nearly end, really hope to taste the rom^o^
Sent from my LG-P500 using XDA App
I'm bumping this thread in hopes that the spamming of the dev thread will stop... let's see.
How do I switch from AmonRA recovery to CWM?
Feeshie said:
How do I switch from AmonRA recovery to CWM?
Click to expand...
Click to collapse
Your question has nothing to do with this rom... flash CWM via zip...read the stickies in the dev section to find it.
Turducken said:
Your question has nothing to do with this rom... flash CWM via zip...read the stickies in the dev section to find it.
Click to expand...
Click to collapse
It does. Andy says in his description that this rom only supports CWM and AmonRA isn't supported anymore. But Thanks.
Feeshie said:
It does. Andy says in his description that this rom only supports CWM and AmonRA isn't supported anymore. But Thanks.
Click to expand...
Click to collapse
Despite what Andy says that's not actually true. Simply disable "signiture verify" in AmonRa and it'll work just fine. AmonRa supports both Amend and Edify scripting, I honestly don't know why he posted that.
Feeshie said:
It does. Andy says in his description that this rom only supports CWM and AmonRA isn't supported anymore. But Thanks.
Click to expand...
Click to collapse
What? The bomb can be flash using AmonRA but disable the stupid verfication and u r set to go for the bomb,
Sent from my LG-P500 using Tapatalk
Haven't got time to tinker with phone here, Andy released on 2AM and then I have to go to work lol. Has anyone confirmed the USB detecting without LG driver feature? That's my most anticipated feature.
Also, nice to know I don't need the extra step to change recovery first. I know AmonRa is old, but it hasn't given me problems so changing isn't high on my list
Interesting that people in the dev thread says it works with both old and new basebands.
So I flashed the new rom, it looks amazing but the only problem I came across was no mobile data, I even flashed the gapps but still no mobile data. Anyone have the same problem.
Sent from my LG-P500 using XDA App
You need to add your apn manually and after flash Franco later kernel, wifi working very well.
Thanks again for Andy and franco
Sent from my LG-P500 using XDA App
Where do I find a copy of the apn list? Can I use mik's cm7 apn list, copy it to the system/app path than reboot, also forgot to mention about changing permissions
Sent from my LG-P500 using XDA App
Jrhodes85 said:
Where do I find a copy of the apn list? Can I use mik's cm7 apn list, copy it to the system/app path than reboot, also forgot to mention about changing permissions
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Use Apn backup and restore app from market ;-)
Sent from my HTC Desire using XDA Premium App

[ROM][JB][AROMA] Infinity CM10 1.0 [08/04][Out of Beta!]

This ROM was not created by me credit for this rom goes to ice14777. All I did was port it from the i9100 to our i777. So have fun and please follow the forum rules.
Infinity CM10 Changelog
v.1.0 (20120803)
Based on CM10 Android 4.1.1
*Siyah JB Kernel for i777*
Infinity Tweak
Bravia Engine
Awesome Beats
Screen filter
Flash Player
Google Chrome Browser
Apex Launcher
Polaris Office
Infinity Boot Animation
Aroma Installer
Release
v1.0 Beta (20120728)
Based on CM10 Android 4.1.1
Infinity Tweak
Bravia Engine
BeatsAudio
Apex Launcher
Polaris Office
Infinity Boot Animation
Aroma Installer
Release
Click to expand...
Click to collapse
Bugs
No OTA Support
You tell me!
Download
Foono Download Link
Installation
1) Wipe Data and Factory Reset, Wipe Cache, and Wipe Dalvik Cache
2) Flash ROM
3) Go through AROMA installer and when finish untick the "Reboot Now" option
4) Wipe Cache and Dalvik Cache(I wiped only Dalvik Cache and was fine(2nd ROM slot), but if you can wipe Cache also.)
5) Reboot and Enjoy
Click to expand...
Click to collapse
Thanks
AOKP Team - AOKP
CM10 Team - CM10
NeoPhyTe.x360 - Toggles
bajee11 - Guide,Resurrection Lockscreen,Phone.apk
knzo - Tweak (Build.prop,init.d)
RockoDev - BeatsAudio
Awesome - AwesomeBeats
acquariusoft - Update me
Dragon7780 - Framework blackground
Click to expand...
Click to collapse
RESERVED
Kernel - Siyah
Modem - UCLE5
Foono Download Link
Wow. Bravia engine and beats audio?
why you waste your time on this? all the others seem worthy
Props tho as your on a roll
MotoMudder77 said:
Wow. Bravia engine and beats audio?
why you waste your time on this? all the others seem worthy
Props tho as your on a roll
Click to expand...
Click to collapse
Its all about personal preference, some like this type of ROM.
EDIT: Plus Infinity baked in his tweaks.
Ah never mind I am happy to see more ports , but equally worried if you will be to able to manage time for all the updates -> porting -> uploading
So Thanks again for the work and Best of Luck maintaining this
Would love to try this port
Sent from my SGH-I777 using xda app-developers app
Download link is up! Sorry about that guys
Foono Download Link
mlaws90 said:
Download link is up! Sorry about that guys
Foono Download Link
Click to expand...
Click to collapse
I have been trying all your ported ROMs and am gonna try this as well (except for paranoid, dislike tablet mode for a blind bat like me )
A quick question, how's the bluetooth A2DP function? Can it work with my car audio system as RootBox couldn't but RR is ok.. but RR battery drains faster than I blink... something went so wrong that within 10 mins and after a couple of restarts, the battery dropped 30% from 50% to 19%. Scary isn't it?
Btw.. the download link is really SLOW..
bb_hershey said:
I have been trying all your ported ROMs and am gonna try this as well (except for paranoid, dislike tablet mode for a blind bat like me )
A quick question, how's the bluetooth A2DP function? Can it work with my car audio system as RootBox couldn't but RR is ok.. but RR battery drains faster than I blink... something went so wrong that within 10 mins and after a couple of restarts, the battery dropped 30% from 50% to 19%. Scary isn't it?
Btw.. the download link is really SLOW..
Click to expand...
Click to collapse
The Download link is fine just got a 3-4 min ETA on a 346 MB file then canceled. I am not sure about A2DP on this ROM as I have not tested it and generally only use it on my One X as my i777 is my secondary. That battery drop is unusual try re-calibrating your battery(take it in and out).
mlaws90 said:
this rom was not created by me credit for this rom goes to ice14777. All i did was port it from the i9100 to our i777. So have fun and please follow the forum rules.
infinity cm10 changelog
bugs
no ota support
you tell me!
download
foono download link
installation
thanks
[/list]​
Click to expand...
Click to collapse
any screenshots?? Please????
mlaws90 said:
The Download link is fine just got a 3-4 min ETA on a 346 MB file then canceled. I am not sure about A2DP on this ROM as I have not tested it and generally only use it on my One X as my i777 is my secondary. That battery drop is unusual try re-calibrating your battery(take it in and out).
Click to expand...
Click to collapse
I have been trying to download for the entire day. Always failed and ETA is always 5-6 hours and then got stalled Would you mind to have mirrors on it? I love CM10 ... for the smoothless and amazing battery life..:good:
rom is great so far but there are no apns listed so no data service
Rom is smooth and fast. Came from pa cm10 and didnt have to wipe anything and everything is running great.
Sent from my SGH-I777 using xda app-developers app
jaysonscott4212 said:
rom is great so far but there are no apns listed so no data service
Click to expand...
Click to collapse
Have you tried adding your APN? I noticed on Root box I had to restart after I flashed it. Apn's worked fine afterwards. Open APN, hit menu, hit add new. Don't forget after you are done to hit menu again and save it.!!
Sent from my SGH-I777 using XDA
Tweaker7376 said:
Have you tried adding your APN? I noticed on Root box I had to restart after I flashed it. Apn's worked fine afterwards. Open APN, hit menu, hit add new. Don't forget after you are done to hit menu again and save it.!!
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
If the problem persists I may add APN settings to the OP.
Restart fixed issue also noticed WiFi not working
Sent from my SGH-I777 using xda premium
OK fixed wifi but now play isn't working one issue after the other going to flash back to cm9
Sent from my SGH-I777 using xda premium
Anyone else have an issue with nandroid? I tried to restore three different ROMs, all failed. I know this is a kernel issue, not a ROM issue, but I'm using the Siyah kernel that's packaged with this ROM. Just and FYI.
josh84 said:
Anyone else have an issue with nandroid? I tried to restore three different ROMs, all failed. I know this is a kernel issue, not a ROM issue, but I'm using the Siyah kernel that's packaged with this ROM. Just and FYI.
Click to expand...
Click to collapse
Im pretty sure its because the kernel isnt a JB kernel.
jaysonscott4212 said:
OK fixed wifi but now play isn't working one issue after the other going to flash back to cm9
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I think you need the jb kernel and the updated gapp to make everything to run smooth
Sent from my SGH-I777 using xda app-developers app

[ROM][4.2.2][CM10.1] Unofficial Jenkins Builds (03/08 Oct, 2013)

======================================================================
[WHAT'S NEW?] FINAL 4.2.2 build feature notes...
10.1.5 comes with HALO.
10.1.6 comes without HALO.
======================================================================
[DOWNLOAD]
CM10.1.5 http://jenkins.androidarmv6.org/job/android/575/ (I don't own a copy of 10.1.5 since I had no need of HALO,
if anyone has a copy - contact me)
CM10.1.6 DOWNLOAD
Note: Google apps are NOT included - download from HERE THESE or use this MIRROR.
======================================================================
[Known bugs]
#1.Can't check Auto-Brightness in Settings->Display->Brightness?
==>>Pull down the Quick Settings Panel on Status Bar, choose Brightness and check Auto-Brightness from there.
#2. Wifi teather not working? [Fixed since CM 10.1.3]
==>>Search "wifi teather" on Play Store, users reported that "Wifi Teather Root" works. If anyone deers to confirm ill update this.
#3. Wifi don't reconnect after deep sleep (or 10min of inactivity)? [Fixed after July builds]
==>>A xda member, @soulreaver1 was frustrated of the same issue, so made an app that fixes it, visit it HERE where you will find the playstore link. It takes only a few seconds to thank him !
#4. BOOTLOOP after flashing SD-Ext script?
===>>Your SD-Card is not partitioned like it's supposed to caused by unknown bugs likely by Clockwork Recovery and u need to repartition it your SD-Card...So far I can only recommend Amon Ra, since I did it trough it and got the SD-EXT Tweaks working.
[Tips & TRICKS]:
==>>There are so many scripts on xda to boost your performance, wondering which to choose?
#Well It's best for you to try them all and see which one suits you best but if you wish to save some time click HERE , I personally use "Operation Killjoy" myself.
(CrossBreeder is another tweak, mentioned since it's compatible with Killjoy,
If you wish to combine it I suggest you to flash one at a time, boot your device after first flash and let it stabilize about a minute or 2, then flash CrossBreeder).
Flashing both at the same time caused great delay and system misbehaving, whats it gonna be it's up to you.
Others scripts I tried are Adrenaline Engine and Pure Performance and Fly-On(I believe was the name).
Know a better one then all above? Feel free to share it with us.
Credits on Operation Killjoy script goes to @Exit_Only.
==>>Flashed but no gapps?
#Since you're flashing experimental build, use THESE 4.2.2 Gapps or this MIRROR
Thanks to @rr0yy!
==>>Developer and Performance options missing??
#Enable performance and developer options with x7 times clicking on Settings->About->Build Date.
==>>Looking for data2ext solution?
#Here's the Thread link and...
==>>The Tutorial !
(Note: A partitioned SD card is required, otherwise skip this and partition it first.)
#1.After done with flashing ROM, flash the sd-to-ext* script.
#2.You must boot phone at least once before you can flash the second script. So, boot ROM and after 2 min are passed and system stabilized, reboot in recovery.
#3.Now flash the second to-sd-to-ext* script.(it should take about 2min to complete.)
#4.PROFIT! You got extra internal space! Get downloading cool new apps
(Oh, wait, If you get any error or stuck on "mounting sd-ext" or "unmounting sd-ext" do this:
Go into Mounts and Storage and try to mount /sd-ext. If you get Error Mounting then your SD Card is not partitioned well and I recommend you to flash Amon Ra Recovery and partition your SD Card from there. I had the same issue because of Clockwork buggs as already mentioned )
You just had to do it, huh?
Sent from my LG-P500 using xda premium
you macedonian nut
isn't the general thread and the other thread on the original works enough? D:
Sent from my LG-P500 using xda app-developers app
Left4DeadMW said:
A link from Jenkins Builds since many users of our O1_p500 didn't know about it and I personally can't find it here in the " LG Optimus One, P500, V"...
==> http://jenkins.androidarmv6.org/ <==
(latest p500 build for lazy ppl -> http://jenkins.androidarmv6.org/job/android-experimental/10/ )
(i did NOT developed this, although those are jenkins original developed builds,I do believe that someone should've made a thread for it here on xda, some of us p500 users use it daily and we can exchange some info's about it or simple help each other out...If YOU moderator look at this as something "wrong" simple transfer in "General" or Delete it.)
Cheers..
Click to expand...
Click to collapse
Where is the Developer Settings in this rom?
I couldn't seem to find it anywhere. Some help please
Thanks
settings>about phone>tap build number 8 times and the settings will appear (it will tell you "you are now a developer", just hit back and the development options will be there along with the performance settings)
Sent from my LG-P500 using xda app-developers app
LeftForDeadMW ... this is repatative bro ... but as u have already made the thread utilization will be best if you can put up latest jenkins build changelogs ..
/\ |\| /\ |< |\| | |\|
pls hit thanks to show gratitude fr help
:: peace
Sent from Legendary Pandoras Box unlocked with my Rooted LG P500 Optimus One ...
I put it in "Original Development" since it's original and it's most likely for people to find it here then in General trough..
I wanted first to see you people will show some interest in this then put some detailed information about it...
(Or if you disagree with my opinion PM Moderator and you will save me some time )
Will do the "thread makeup" when i get back home. :good:
Sent from my LG-P500 using xda premium
dnle71 said:
You just had to do it, huh?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes :evilsmile:
Sent from my LG-P500 using xda premium
729 mhz- 320mhz smartass
Great smoothness....no lag ...no hang..
I am running April's build
Sent from my LG-P500 using xda premium
The latest build is named RC1..! really good for daily use...
Yeah I feel this thread was needed..
aravindsagar said:
The latest build is named RC1..! really good for daily use...
Yeah I feel this thread was needed..
Click to expand...
Click to collapse
How is battery with 3g, Wi-Fi usage?
Depends fairly on usage, freqencies, apps, traffic and so on
Sent from my GT-P1000 using xda app-developers app
nomancoolboy said:
729 mhz- 320mhz smartass
Great smoothness....no lag ...no hang..
I am running April's build
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I checked everything for changed since April's build till now...
Noting found -_-
All i can post for now is cm10-cm10.1 changelog since I found it in "about"
If someone could provide me with some clues where can i find it then great, till then [empty].
renzetti.s said:
How is battery with 3g, Wi-Fi usage?
Click to expand...
Click to collapse
Bad..very bad...
I don't know exactly for 3G but i can confirm that battery drain with on Wifi is huge...about -10% for like 10-15min on Wifi..
(played with my bro yesterday: wifi+game = from 20%->4% in 6-7min -_- )
Otherwise you get about 10hours battery with using phone not so much...
(-30% of time into Airplane mode)
(-No 3G, Wifi, Bluetooth..)
(-Greenify used to make sure no app runs in background.)
Playing games often turns your phone to "hand heater" and wastes your battery so quicky..(i reboot and remove the battery about 2min to cool off..)
If there is anything that should be fixed next, it's battery drain for sure..
Int2Ext/Data2ext
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
No more builds after 06052013?
Left4DeadMW said:
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
Click to expand...
Click to collapse
@Left4DeadMW - Link2sd is working fine.
But suddenly Jenkins stops building from yesterday.The last build dated 06052013 but since then it stops.Anybody knows whats d matter?
sumansur2008 said:
@Left4DeadMW - Link2sd is working fine.
But suddenly Jenkins stops building from yesterday.The last build dated 06052013 but since then it stops.Anybody knows whats d matter?
Click to expand...
Click to collapse
The builds are executed with the help of a timer.
Next executions
Timer-Weekly 11/05/2013 02:08
so, the next build will be executed tomorrow.
Left4DeadMW said:
Anyone got some kind of INT2EXT or Data2Ext Script to work on this?
Click to expand...
Click to collapse
I managed to get INT2EXT working with the latest RC1, it was simply a matter of trimming the ROM to give you more free space in your system partition. You may also need to mount /system in your recovery before flashing the script in order to get it to work.
----------
Sent from the moon.
And about jenkins changelog?
Did anyone found something specifically rather then "changes.txt" on build website?
Sent from my LG-P500 using xda premium

[PATCH][AROMA] Polluti0ns Rom Patch [4.4/4.3]

Polluti0n's Rom Patch​
=Disclaimer=​I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE, YOU ARE FLASHING THIS AT YOUR OWN RISK. I HAVE TESTED THIS PROCEDURE BUT I CANT SAY IT WILL WORK FOR YOU. IF FLASHING THIS CAUSES YOUR CAT TO PEE ON YOUR BLANKET, I WILL NOT CLEAN IT UP.
=Description=​This is a patch for 4.3 and 4.4 roms. The patch can take care of many things such as changing kernels, changing bootanimations, fixing video recording and much more. The beauty of this patch is that it uses the aroma installer, so it actually lets you decide what options/fixes you want to install. You could actually flash the patch and not install one single thing if you didn't want to. Also this patch can be flashed as many times as you want so you can get things setup just the way you want. Anyways, have fun and leave feedback
=Changelog=​Version 2.0​
Included an updated uber kernel
Included the most up to date CM kernel
Added an old PAC kernel that supports BLN (this is experimental)
Removed boot animations that had issues
Tweaks to screen flicker patch to make it work on more roms
Version 1.0​
Aroma installer
Choose which kernel you would like to install
Fixed Beanstalk boot animation to be full screen
Choose from a ton of custom boot animations
Choose which patches you would like to install
Updated fixes for Video Camera (should work with most roms)
Hacked adobe flash player (must use DOLPHIN JET PACK)
Option to wipe cache and delvik cache
Fix any screen flickering that was present on 4.3 and 4.4 roms.
Set default CPU governor to "Wheatley" to avoid any wakelock issues.
=Instructions=​
Simply Flash the zip in recovery and select the options you want.
=Download=​Polluti0ns_rom_patch_v2.zip - 102.16 MB
Thanks you guys, and happy flashing
-Polluti0n
Mine
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Trying it now, I'll let you know how it works.
Edit: I've been running it for about 5 mins now and nothing so far. I'll report back in about an hour. Awesome work Polluti0n!
Edit2: Still looking good an hour and a reboot later. I was able to trigger flickering pretty reliably by scrolling the baconreader widget and that seems to be gone.
Thanks man. My main concern was getting rid of the flicker bug that came back.
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Thank you for the updated version! I have been running patch_Adam's BeanStalk with you patch always and it helps incredibly! Just as a question, in the new version, is the Screen Flicker fix disabling permanently the Hardware Overlays like in your first version?
Yes it just fixes a bug where the script quit before finding all the places to change to quote polluti0n in the other thread:
Well I think I found the problem. Still need to test some stuff out.
So in the build.prop @ line 118 you have the following value:
persist.hwc.mdpcomp.enable=false (this is in a section called screen flicker and is one of the values to fix flickering)
then @ line 137 you have a value of:
persist.hwc.mdpcomp.enable=true (obviously these are contradicting values)
Why my flicker fix isn't working:
My script scans the build.prop for "persist.hwc.mdpcomp.enable=" if the value equals "true" then my script will change the value to "false", but if the value equals "false" then my script will simply exit.
So my script scans till it hits the first persist.hwc.mdpcomp.enable=false and thinks everything is cool then exits. It never scans further and finds the contradicting value at line 137.
Let me do a little testing and work on writing a failsafe into my script that should fix this issue
-Polluti0n
Click to expand...
Click to collapse
I've had it in five minutes. Need more time to know. Should the hw overlay in development be checked (it isn't) or does that become irrelevant with the patch?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
It is irrelevant now. Glad its working guys.
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
This definitely needed its own thread...glad to see you got one up
HUGE thanks for your work!!!
On the latest unofficial CM 11 any of the kernels throws the endless error "unfortunately, the process com.android.phone has stopped."
jman315 said:
On the latest unofficial CM 11 any of the kernels throws the endless error "unfortunately, the process com.android.phone has stopped."
Click to expand...
Click to collapse
Thanks for the feedback. It's my understanding that there are a ton of changes to the new cm11. In fact we may get an official cm11 build but no promises. Anyways for now just use the cm11 kernel that came with the rom.
To revert back to the default kernel just dirty flash the rom again and the kernel will be overwritten. You may run into wakelock issues which is a common problem with cm kernel.
-Polluti0n
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
jman315 said:
On the latest unofficial CM 11 any of the kernels throws the endless error "unfortunately, the process com.android.phone has stopped."
Click to expand...
Click to collapse
That's so strange. But I did have to totally clean install and it went away
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Polluti0n said:
Thanks for the feedback. It's my understanding that there are a ton of changes to the new cm11. In fact we may get an official cm11 build but no promises. Anyways for now just use the cm11 kernel that came with the rom.
To revert back to the default kernel just dirty flash the rom again and the kernel will be overwritten. You may run into wakelock issues which is a common problem with cm kernel.
-Polluti0n
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No worries. Just wanted to let others know. I wonder if the kernel from BlownFuze's AOKP would work with the unofficial CM 11 builds? That rom has been extremely stable.
jman315 said:
No worries. Just wanted to let others know. I wonder if the kernel from BlownFuze's AOKP would work with the unofficial CM 11 builds? That rom has been extremely stable.
Click to expand...
Click to collapse
If it does let me know and I will ask him if I can include it in the patch.
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Hey Polluti0n you should ask Patch about updating the link in his beanstalk thread as it still links to the v1 post.
bonez565 said:
Hey Polluti0n you should ask Patch about updating the link in his beanstalk thread as it still links to the v1 post.
Click to expand...
Click to collapse
Good call. I will get on that.
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Hey Polluti0n I was checking the liquid smooth thread and saw your post on a v4 of the patch. Is this something than people on ROMs other than Liquid Smooth can use or is it ROM specific?
Is just a flicker fix. ya you can use it on any rom. It was needed because there were some issues with the build.prop in LS.
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Strange.. I installed the patch to disable to flicker issue and rebooted the system. It just hung on the boot animation for a good 5 minutes and then ended up going into a boot loop. Not too sure what's going on?
Is there any method of dealing with flicker other than disabling HW overlays? I hate the stutter in the ui without HW overlays on.

Categories

Resources