Related
Hi, I'm new here, and I just wanted to ask if anyone has tried running PSX4droid on a stock or rooted wildfire.
Sorry if this was a question that was already asked before
thanks for any future response
i remember reading this thread a while back but never got round to trying it -
http://forum.xda-developers.com/showthread.php?t=963395
not sure how good it would be with on screen controls on such a small screen.
If you have luck with it let me know.
ps. you dont say whether your rooted and rom'd but it looks like for best performance you
wanna be on cm7 or similar.not sure how well stock would fair?
EDIT: NVM, Already linked above.
Thanks for the quick response
I'll check it out right now and probably post later.
I did try the Nesoid on my rooted wildfire running at 691 mhz and it works great without any problems. And I just wanted to see if it could run something much better than NES games.
I tried it yesterday and loaded Final Fantasy 5. After choosing the ROM, it just showed a black screen and kicked me back to the selection screen.
More info on this would be nice
Trying the fPSe right now.. but whenever I choose the app, It just shows a black screen, doesn't even let me choose the BIOS or anything..
might try again a while later, but no progress for now. Guess I'm stuck with NES games for a while
By the way I'm using CM7 RC2 and running at 691mhz, if that helps...
griever00717 said:
Thanks for the quick response
I'll check it out right now and probably post later.
I did try the Nesoid on my rooted wildfire running at 691 mhz and it works great without any problems. And I just wanted to see if it could run something much better than NES games.
I tried it yesterday and loaded Final Fantasy 5. After choosing the ROM, it just showed a black screen and kicked me back to the selection screen.
More info on this would be nice
Trying the fPSe right now.. but whenever I choose the app, It just shows a black screen, doesn't even let me choose the BIOS or anything..
might try again a while later, but no progress for now. Guess I'm stuck with NES games for a while
By the way I'm using CM7 RC2 and running at 691mhz, if that helps...
Click to expand...
Click to collapse
Follow below link for FPse PS1 emulator:
http://forum.xda-developers.com/showthread.php?t=963395
In FPSE, you can directly run the PS1 game (either ISO or BIN), but all games does not play. You need to try multiple games. Anyway, in the link, I have already mentioned some games which I tried.
yeah.. I guess I have to try a couple more games..I tried to play Final Fantasy 5 on it and thought "hey, If Final Fantasy 7 worked on it, I bet 5 would work"
Guess I'd better try more ROMS.. Thanks for the help guys..
Hi,
As some of you may know Onlive recently released an app for the HTC Flyer.
From the bottom of: http://forum.xda-developers.com/showthread.php?t=1138194
It has been exported and gotten to run on a number of devices, however I am unable to get it to run on the Gtabet. I am running a rooted stock rom with the enhancement pack.
When running the Onlive viewer app the screen turns black for 1 second and then it goes back to the home screen with no messages. Has anyone has any luck with this app or any ideas as to why it does not work on the gtablet?
No one has any ideas? Onlive on the gtab would be amazing!
Havent tried it but it might be possible under CM7.
CM7
Just tried it on CM7 the market online says its compatible but won't download it.
Also on CM7: sideloaded it, but same issue as OP (turns black for 1 sec, then nothing).
Works on Gtab Comb v3.3
gtabletguy said:
Hi,
As some of you may know Onlive recently released an app for the HTC Flyer.
From the bottom of: http://forum.xda-developers.com/showthread.php?t=1138194
It has been exported and gotten to run on a number of devices, however I am unable to get it to run on the Gtabet. I am running a rooted stock rom with the enhancement pack.
When running the Onlive viewer app the screen turns black for 1 second and then it goes back to the home screen with no messages. Has anyone has any luck with this app or any ideas as to why it does not work on the gtablet?
Click to expand...
Click to collapse
Downloads & installs on Gtab Comb v3.3. I've so far sucessfully played the demo version of Darksiders, Lego Batman & Lego Harry Potter. Play has been smooth. I have had it lock up a couple of times. CPU seems to get rather warm so not sure if it's a heat issue.
Al
fmatgnat said:
Also on CM7: sideloaded it, but same issue as OP (turns black for 1 sec, then nothing).
Click to expand...
Click to collapse
I've seen this issue on my gTab while trying to play some other games, like Contract Killer & C.K. Zombies.
This usually do to pixel density. You can change the default pixel desity by using Prop.Editor.
There are serveral posts that discuss how use it, but the value is in Build.prop, I'm sure google will return the post that has the file and specifics on how to use the app. Its not difficult at all.
Good luck
I set Chainfire 3d to these settings for Shadowgun.
In Chainfire3d: Default OpenGL settings
Reduce texture quality
Reduce texture size
Disable MapBuffer emu
The download of the additional files gets to 100% and then it crashes. Any idea on how I can get it to finish?
I have it on my XOOM, where in its file structure can I just copy it over to my Nook? Thanks.
I just copied over the entire com.madfingergames.shadowgun folder from my SD card on my phone and put it on the sd card for my nook. After doing that I started the app, it downloaded past 100 percent, but started right up. Plays perfectly so far.
You guys got shadiwgun working on this wow make me regret giving my nook to my wife and getting a Acer iconia tab
Lol
Sent from my A500 using Tapatalk
Mine works until its loading the first level. I can see the intro flawlessly, but when it finishes or is skipped I crash after a while in the loading screen. I don't get FC it just got back to previous screen (Chainfire)
it plays. very stuttery and jerky past the first level, but it still plays. When I first bought the game i couldn't get it to play but if you know how to search right, you can find a version floating around that has been optimized for none dual core devices.
That's the best I can give you. I paid for the game so i won't direct anyone to a pirated copy, but there is one floating out there that doesn't need tegra.
I tried the low version and still got same result. Maybe there's something wrong with my sd cache files since it kept freezing during the download...
Sent from my NookColor using Tapatalk
Here is what I did to get it to work:
1) Get ShadowGun v1.0 and SD files
2) On Chainfire3D go to default open gl settings
3) Set plugin "NVIDIA", check "reduce texture size", "disable mapbuffer emu" and "hide cf3d id" (check reduce texture quality if you want better performance)
4) Run game.
5) ???????
6) Yeah... Profit!
How do I get it from the market is says my nook color is not compatable?
The market version isn't going to work. You have to google for it.
Where do u get the plugin from? Can anyone help?
google "chainfire 3d plugins". you should be able to find it. By the way, the plugins are zip files, once you've extracted them from the file you download just put them on the root of your sd card and install from the program.
I have tried several times, but it will not find my plugin file. I downloaded the correct one and used drop box to put it on my nook. Can anyone help thanks
The files:
libGLEMU_QUALCOMM.zip
libGLEMU_POWERVR.zip
libGLEMU_NVIDIA.zip
need to be on the root folder of your SDcard.
Don't forget that you need to "install plugins" before "Use plugin/Load a plugin"
Igot that done, but now it bombs out after it gets to 99% of the first download. Any suggestions?
I had it bomb on all of the downloads. It you keep trying, they usually download. Did you try installing the sd files? When I did it caused me to freeze on the downloads. Keep trying, took me awhile... Nothing like downloading til 99% then freezing.. drove me nuts
Sent from my NookColor using Tapatalk
well I got everything installed, and the game seems to run smooth, but my controls aren't on the screen.....
-_- Are you kidding me..
Read my graphically intensive games thread (includes Modern Combat 3, NOVA 3, Dead Trigger, Shadow Gun, and Mass Effect Infiltraitor) for any games info and how it works, why it works, and how to do it yourself. No Chainfire is needed. Shadowgun and Dead Trigger can even be downloaded from the Play Store. Im not trying to sound like an ass, but make sure you SEARCH before you post. I had to learn it the hard way xD
All the stuff in the thread is CM7 and CM9 compatible.
well I got everything installed, and the game seems to run smooth, but my controls aren't on the screen.....
Click to expand...
Click to collapse
I'm having the same problem running cm9 unofficial.
Sent from my NookColor using xda app-developers app
any ideas/suggestions to get it to working on v3.0 and/or v3.5?
everytime i boot it up on 3.5 it will load up but right until the car is on fire (beginning of the game) then it will freeze up and will be a mix of the splash screen and the car on fire
on 3.0 it will boot up and will finally goto the car being on fire, but then it will just sit there froze up on the car burning
any ideas please?
Maybe a corrupt data download? Try deleting the game data and try again.
I'm running 3.5 OC'd to 1782 and it runs without doing anything special.
is there a folder on the 'sd card' or you mean deleting the 'normal' way with clear app data?
goodelyfe said:
is there a folder on the 'sd card' or you mean deleting the 'normal' way with clear app data?
Click to expand...
Click to collapse
/sdcard/android/data/com.rockstar.gta3/
still nothing
I'm running 3.5 with the HTC Sensation version of the game and I enabled the high quality graphics with that gta3.set file, no problems at all. Runs smooth.
Lights don't work still, but I'm looking on a fix for that.
goodelyfe said:
any ideas/suggestions to get it to working on v3.0 and/or v3.5?
everytime i boot it up on 3.5 it will load up but right until the car is on fire (beginning of the game) then it will freeze up and will be a mix of the splash screen and the car on fire
on 3.0 it will boot up and will finally goto the car being on fire, but then it will just sit there froze up on the car burning
any ideas please?
Click to expand...
Click to collapse
I've got the same problem Work great from 2.1
SyncV2 said:
I'm running 3.5 with the HTC Sensation version of the game and I enabled the high quality graphics with that gta3.set file, no problems at all. Runs smooth.
Lights don't work still, but I'm looking on a fix for that.
Click to expand...
Click to collapse
Can you explain how you changed the gta3.set file? I've got a hex editor but can't find which values to change...
GTA 3 is working fine with Alpha 3.5.
I done nothing with GTA 3 setting.
I just install the apk and download data with Wifi !
HP Touchpad GTA3 SIXAXIS
Here is a link to my post with the files to set up sixaxis with the HP Touchpad.
Also you do not need to redownload the data , you can go inbetween both setting by just replacing the .set file. Hope this helps!
http://forum.xda-developers.com/showthread.php?t=1179929&page=54
me same but i'm on 3.5
i had first 3.0 alpha and it's start and all but when i get in car drive 1 meter bugs and does noting! so i press home and task kill it!
now i'm on 3.5 and it's even worse, na depend last time i could just drive of the bridge and nog even not move when the guy says you drive and bug's!! i'm pissed off because i love this game!!!
but i see a lot of video with poeple having gta 3 working on Hp TP
but some thing is wierde when i restart the tablet last i could get in car etc.. then after some meters bug and now even not in car! and it bug!
i re downloaded the data i think more then 6 times 2, 1 alpha 3.0
and more then 5 times on alpha 3.5!!
couuld some one help?
it sould work!
and it's not the data because after 6 times still broke date can't be posible!
i think the touchpad has some bugs!!
HELP!!!
Just thought I would note that no modifications are needed at all to get this game working on alpha 3.5. No build.prop edits or chainfire. I am using a modified gta.set file that has performece tweaks + Lighting. Join #touchpad-gaming on freenode to get ahold of it
Here's where we shall list the games that just don't work on the latest build of this rom.
If you don't mind, the smart people figuring things out with the rom would like you to test and report back, and report any other games that just don't want to work.
Just reguesting that people get a logcat/dmesg and if your device crashes, a last_kmsg.
The List
Temple Run
Shadowgun
Dead Trigger
Sprinkle
Mayhem
Pinball Pro
Glow hockey 2
Spirits
Here is a Last Kernel Message after testing some games and browsing the GUI.
Here are more Interesting reports.
I was able to catch a glitch from what it seems LCD or Refresh distortion and also some more Logcat Crashes
New misbehaved games:
Free from market:
Mayhem : Touch screen freezes game. Most problematic games do that.
Pinball Pro : 3 dots mute and unmute sound Pressing 3 dots i manage to crash Nook Tablet SOD then reboot/shutdown.
Attached here is a Logcat with Game Glow Hockey 2 that screen goes black when you start main game, and also i included Pinball Pro strange behaviour when pressing 3 dots mute/unmute audio.
Also Last kernel message after i leave Glow Hockey 2 displaying black screen for 1-2 min wich caused a reboot issue.
Spirits doesn't work.The game loads, but hangs after attempting to start a new game.
slgooding said:
Spirits doesn't work.The game loads, but hangs after attempting to start a new game.
Click to expand...
Click to collapse
Logcat And if reboot last kernel msg.
Thanks
Guns'n'Glory works for a bit and then crashes. Here are some logcats and dmesg.
Mechapanda said:
Here's where we shall list the games that just don't work on the latest build of this rom.
If you don't mind, the smart people figuring things out with the rom would like you to test and report back, and report any other games that just don't want to work.
Just reguesting that people get a logcat/dmesg and if your device crashes, a last_kmsg.
The List
Temple Run
Shadowgun
Triple Town Game
Dead Trigger
Sprinkle
Mayhem
Pinball Pro
Glow hockey 2
Spirits
Click to expand...
Click to collapse
Triple Town is now working after the app was updated last night/this morning. Not sure exactly what they did, but it's working now
Mechapanda said:
Here's where we shall list the games that just don't work on the latest build of this rom.
If you don't mind, the smart people figuring things out with the rom would like you to test and report back, and report any other games that just don't want to work.
Just reguesting that people get a logcat/dmesg and if your device crashes, a last_kmsg.
The List
Temple Run
Shadowgun
Dead Trigger
Sprinkle
Mayhem
Pinball Pro
Glow hockey 2
Spirits
Click to expand...
Click to collapse
How is anyone able to play games? I can't get the wifi to stay on long enough to complete a download
JT
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
Rebeljt said:
How is anyone able to play games? I can't get the wifi to stay on long enough to complete a download
JT
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
while many would love to help you fix your wifi issue, you need to provide more details than "wifi won't stay on"
assuming that you are on the latest version of chrmhoffmann's CM10 (per the thread title)
what is the environment and what are the symptoms?
is this your home wifi router?
how far away is the router?
is it secure?
are you getting interference from another router or transmitter, clutter on the channel?
what have you tried so far, have you re-flashed the ROM?
give us a little to go on and maybe we can help
:fingers-crossed:
xshawk said:
while many would love to help you fix your wifi issue, you need to provide more details than "wifi won't stay on"
assuming that you are on the latest version of chrmhoffmann's CM10 (per the thread title)
what is the environment and what are the symptoms?
is this your home wifi router?
how far away is the router?
is it secure?
are you getting interference from another router or transmitter, clutter on the channel?
what have you tried so far, have you re-flashed the ROM?
give us a little to go on and maybe we can help
:fingers-crossed:
Click to expand...
Click to collapse
So sorry. After I left the post I was thinking maybe it wasn't the right place.
To answer your questions...
I could be anywhere in my house. Signal could be very strong of very weak. The router is about 3-4 rooms away in a basement. I never had these issues with CM7. My router is secure WPA I believe. I'd have to double check. I'm not sure about any interference... But I can try to figure that out. (But never had issues with CM7)
Most of the game titles I have tried so far come from gameloft. Order and Chaos, Nova 2, Nova 3. I watch the numbers count up and they go very quickly say 30-40 mb in a few seconds then very very long pauses.Then another 30-40 mb in few seconds and then another very long pause and then after a while longer the wifi connection is lost. I go back to the main screen to find my wifi has actually turned itself off. Short downloads seem to be ok. Larger downloads are not. This has also happened to me if I surf on the unit for a very long time.
If this isnt the right place I apologize. I can't seem to to find a place where I'm allowed to post yet..
Thanks,
JT
Problematic games are a little less problematic
Greetings. Since the introduction of CM9, I've found that many games and applications weren't handling touch events correctly and consequently, caused games - like gta3, shadowgun, and battleheart - to crash, hang, or not display ui elements correctly. This was very depressing indeed and I'd often stare down at my nook tablet regretting my purchase. I honestly felt Gingerbread simply didn't belong on a tablet and the stock BN Rom felt very antiquated for my tastes. I was stuck, or at least I felt that way. CM9 - now I'm using CM10 - was nice, but none of my favorite applications would operate the way you'd expect.
However, thanks to some very diligent gentlemen over in this thread , games and apps that once behaved awkwardly with regards to touch events are now working fine! I somewhat feel inclined to include a "games that are now working" list, but honestly, everything I've thrown at the nook tablet since updating its firmware and patching the fixed kernel driver, has worked wonderfully well. GTA 3, Raymans jungle run, GLWG, Battleheart, deadspace; old or new, many problematic apps are responding to touch events now, and nook tablet owners should really give CM10 a go. I even tried a few lesser known games that would hang due to mishandled touch events and they now work, too. The nook tablet is looking really sexy now, folks :laugh:
tl;dr
mik_os updated our touch panels kernel driver to support a firmware that enables concurrent 5-finger touch. I think he also "sexied" up the touch handling, which resulted in some applications working better - with regards to touch events - than they did before.
Also, once you upgrade your touch panel to this new firmware, there's no going back! You're stuck with CM9/CM10, but I honestly don't think that's a problem
Arch.Monad said:
Also, once you upgrade your touch panel to this new firmware, there's no going back! You're stuck with CM9/CM10, but I honestly don't think that's a problem
Click to expand...
Click to collapse
Not correct. You can flash stock firmware for touchscreen, thus revert is possible