Hi I have tried flashing my S2 but have run into an issue.
So i installed clockworkmod recovery 4.0.1.4 with the intention of installing cyanogen mod.
I then rooted the device using S2 root which said it was successful.
This was confirmed when i then installed and rom manager premium.
I downloaded Cyan from within rom manager and proceeded to install.
I selected to wipe data and dalivk.
The phone rebooted but hung for a long time on the white 3d triangle with an orange exclamation mark.
It then went into the clockworkmod recovery and I rebooted presuming everything was done.
Then my phone started as normal but went into the original rom but there was no app's, icons ect. I rebooted and app's icons were back.
So I rebooted into recovery mode again and tried to update from sdcard. no difference. So i read that wiping data/factory reset might help but now all i get is the boot loop between my carrier startup and the standard S2 startup.
I can still get into recovery and download mode but when i enter download mode I cannot see the phone in odin.
I have also tried putting the update.zip on my sd card manually from a PC download and use recovery mode to install it but thats not installing it either.
Any ideas or is my phone fubar?
All your questions answered and more in the dedicated thread http://forum.xda-developers.com/showthread.php?t=1176411
Hi thanks for the reply, i wish i had found that thread before attempting this.
I have managed to get odin seeing the phone now so its looking good.
problem i have is i need these:
XWKJ1:
Firmware info: PDA: XWKJ1| Phone: XXKI4 CSC:O2UKJ1
XWKJ1 Stock Kernel:
Password is: [email protected]
but multiupload was part of megaupload i believe so everything is gone.
Do you know where else i can find these.
Not sure why you'd want it, but
http://www.sammobile.com/firmware/ suggests http://hotfile.com/dl/145851215/0c1c8da/I9100XWKJ1_I9100O2UKJ1_O2U.zip.html
Thanks its just a learning curve, i will put cyan on again properly but want to learn as i go on how to do it right first time.
Related
Hi I hope someone can help me. I have searched this forum but could not find a similar situation to what I ended up in...
I tried to install a custom ROM on my Galaxy Tab 10.1 using the CWM/Odin.
This seemed succesful but was not, it did not start but was stuck in the Samsung logo.
So I tried entering the CWM and download and install an original Samsung ROM. I can get it into CWM, but CWM cannot enter the download mode only the other mode.
In this mode all options are available:
- reboot
- apply update from SD card
- wipe data/factory reset
- wipe cache partition
All options have been tried without any luck. In the update from SD card it only shows ...
or Error opening /data/media: no such file or directory
Any ideas how I could get this directory back or put a ROM on the Samsung in this situation.
Odin does see the Galaxy but as I cannot get it into Download mode I am unable to download anything to it.
All or any suggestions are very welcome!
1. CWM (Clockworkmod) =! Odin.
In the beginning, you don't have CWM installed. You install CWM, by flashing CWM on your Phone with odin.
Odin is the Windows Programm, that is used to flash Recoveries/ROM's/Kernels onto your device.
2. it seems, that you still have the default Samsung recovery installed, that meand CWM is not yet flashed on your device.
If the flashing process was succesful (I suppose it was done with odin), but you can't get past the Samsung logo, that means, you probably flashed a rom, that isn't made for your device(ex. a GTab 10.1v Rom).
If you DID flash a wrong rom, then you probably ****ed up the partition table and removed the Download Mode(Odin Mode). Strange thing is, that you still have the Stock recovery.
Could you please redirect us to the rom you downloaded?
Also, did you flash with a repartition on and/or a .pit file?
hi Kaukassus,
thanks for the reply.
OK I checked the files and what I did.
I think I totaly screwed this up. It was a theme I tried to install the AOSP_HC_v1.3_3G+KI1.
I rooted the Tab. So first when the Tab was still functioning installed it on the TAB via USB.
Than tried to install this via update from SD card.
This appeared to work initially. But hung at the start.
After that I tried (via Power Volume Up) wipe data/factory reset.
No luck.
After that I tried wipe cache partition followed by wipe data/factory reset.
And this is what I got now..
Bad news is the Tab was/is a X-mas present and I managed to screw it up even before I officially got it !-(
The valuable lesson you're learning is that you need to be aware exactly what things you're flashing and their compatibility with your device and the software it's running.
You haven't mentioned what specific device you're using or the specific things you've tried to flash (as kaukassus pointed out, direct links to threads where you got the files you tried to flash are best). Not sure if you're aware but not all GT 10.1's are equal; there are several models out there and each and every ROM is specific to a particular device. Verizon LTE GT 10.1's like mine can't take ROMs from any other device for example, it's likely that the new T-Mobile 4G one's wont be able to trade ROMs with Verizon ones . . you get the point.
When you say you installed via USB what exactly did you mean? If you simply copied a zip file via USB to the tab to flash in recovery mode that's not installing; the flashing from recovery may be but the file copy operation is not. If on the other hand you pushed things via ADB or you flash using Odin software then that's a different story.
Best thing to do at this point is to properly identify your device, look for a stock recovery image for Odin and flash that via Odin to your device. At that point you can start from scratch again to build what you want.
Thanks Muzzy996.
You are right. I was in a rush and should have taken more time.
However I am getting somewhere. Managed to get in download mode twice today, don't ask me how. This Tab just will not go into download mode!
However I did not have the stock ROM ready to be installed.
Will keep you updated.
i have the same problem. i just rooted my device was going to overclock. decided to save my rom with rom manager. saved it device went to reboot now the samsung galaxy 10.1 shows up screen goes dim then shuts off, and will cont. do this. i can get into download mode but recovery will not work. is there anyway to download my stock rom. im using verizion 4g 10.1 any help would be great, btw sorry to thread jack
Problem solved.
Managed to get it in download mode again and install stock rom via Odin.
Appeared to work fine. But kep switching off, even after full night of charging.
This morning Tab was dead after recharging whole night..
Got it back on by holding volume down and power button down.
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
I crashed both my I9000 (galaxy s) flashing custom roms and my tab 10.1 (editing some system files) both ended up just looping but managed to get both back. I purchased a small connector of ebay £1.59 that has just a resistor accross pins 4&5 331k I think anyway plugging this into most samsung devices boots them into download mode. Even before getting my resistor I managed to get things working I think that you'd have to be properly unlucky to really brick a samsung I've flashed both my devices with all sorts of crap with my little resistor I just reset them with ease.
Brian
h2bmess said:
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
Click to expand...
Click to collapse
did you ever resolve this issue? i am currently faced with the same issue.
Hello,
I was going to sell my phone to a friend today. I was running CWM recovery and paranoid android ICS. Anyways, I simply went to settings --- > factory reset ---> checked "wipe sd card" and hit OK.
Now it won't boot. It'll go to the Galaxy S II screen and shutoff. It boot loops while trying to boot into recovery mode.
I can, however, get it into download mode. I was looking at guides on here on how to reset it and are confused as can be. Where can I download Heimdall (yes, I googled it, couldn't find the download on their site.)
I'm on Mac OS X, if that helps, however I can get windows if it'll make everything easier.
Thank you
Use the guide linked in my signature, for returning the phone to stock. Link for heimdall is in the guide.
First enter recovery if possible, and perform a wipe data/factory reset from within recovery. If successful, joy.
If not successful, then flash stock using Heimdall, or borrow a pc and use Odin.
Forgot what I said earlier...I hooked up my Windows 7 SSD and booted into Windows.
I flashed everything successfully in Odin (only flashed a PDA/Phone part, not bootloader or CSC.)
Now it's stuck looping "Rethink Possible" AT&T Logo. However, I can get into some form of android recover. I don't know what I can flash through it, though.
Any help?
Thank you
Colton127 said:
Forgot what I said earlier...I hooked up my Windows 7 SSD and booted into Windows.
I flashed everything successfully in Odin (only flashed a PDA/Phone part, not bootloader or CSC.)
Now it's stuck looping "Rethink Possible" AT&T Logo. However, I can get into some form of android recover. I don't know what I can flash through it, though.
Any help?
Thank you
Click to expand...
Click to collapse
Factory reset if on gb
Sent from Team Pirate's Transmitter Thingy
stuck in boot similar problem
I'm having trouble booting my phone. I rooted using Odin3 and siyah 3.4.2 it flashed i was no longer able to view video or the live picture of the camera. I was using another site galaxys2root.com as my guide and failed to be resolved in the forum there. In an attempt to resolve the issue I went into factory reset using power vol+ vol- and tried to wipe the system but it didnt reset competely still had the siyah running. I then attempted to use reset within setting and now i am stuck at the first boot screen "samsung galaxy sII GT-I9100". It will also show charging but only briefly then it goes black. I would just like to get back to stock ROM if possible. Please advise.
muttonchoppa said:
I'm having trouble booting my phone. I rooted using Odin3 and siyah 3.4.2 it flashed i was no longer able to view video or the live picture of the camera. I was using another site galaxys2root.com as my guide and failed to be resolved in the forum there. In an attempt to resolve the issue I went into factory reset using power vol+ vol- and tried to wipe the system but it didnt reset competely still had the siyah running. I then attempted to use reset within setting and now i am stuck at the first boot screen "samsung galaxy sII GT-I9100". It will also show charging but only briefly then it goes black. I would just like to get back to stock ROM if possible. Please advise.
Click to expand...
Click to collapse
Bad choice going to galaxys2root.com. Now I have said it. Let see what we can do to get you back.
1st - if you can get into the recovery mode, go here and download AJ's Siyah kernel. Download your favorite ROM
2nd - Flash the ROM first, then Flash Siyah kernel through recovery. Reboot and you should be good to go.
Enjoy.
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
Hi there,
My phone is a Samsung Galaxy SII GT-I9100 with the OS version ICS 4.0.4
Basically I read about my OS version having the superbrick bug in the kernel, and in order to root I needed to install a custom recovery partition (CWM) and then install custom ROMS, so I went ahead and downloaded CWM and then transferred the .tar over to my device with Odin, and Odin said all went well and it passed, next I went to root it with SuperOneClick (v2.2), so I fired that up and hit root, and all was well or so it seemed, SuperOneClick told me I had SU access, so I thought all had worked. I then started in recovery mode just to see if CWM was there and working correctly, however it was just the normal android one, no CWM - although it said Current Binary: Custom and Custom Binary Download: Yes (1 count). I quickly realised it had not rooted successfully when root checker told me it wasn't rooted, and CWM was missing and also that my video playback/camera screens weren't functioning properly - they were just black screens. So I hooked my phone back up to my PC and went to SuperOneClick and hit Unroot hoping all would be well, then when my phone started up again it gets stuck at the boot animation of the big 'S'.
So now I am stuck, I don't have CWM installed to perform a reset, and I don't think I can flash ROM's to my device directly in case it 'superbricks' due to the kernel bug, so I don't know whether I can just flash the stock ICS ROM back on
I am seriously annoyed with this, what can I do?
Any help is seriously appreciated
Thanks alot
Try finding your recovery menu (probably volume up+power from off) and wiping cache. If not, then try factory reset, also from stock recovery. If not, then i'd say you're gonna have to flash stock ICS. No help in your device's thread Q&a? My question is why was the CWM in .tar form? Usually it is an image..
Also, no help in SuperOneClick thread?
bodh said:
Try finding your recovery menu (probably volume up+power from off) and wiping cache. If not, then try factory reset, also from stock recovery. If not, then i'd say you're gonna have to flash stock ICS. No help in your device's thread Q&a? My question is why was the CWM in .tar form? Usually it is an image..
Also, no help in SuperOneClick thread?
Click to expand...
Click to collapse
How do I wipe cache with the recovery menu? It is just the standard android recovery with "Volume up: Continue to download mode" or "Volume down: Cancel (restart phone)". Also would I be able to try and flash CWM again with a different file, and if it works I could perform a stock reset sort of thing? Could you link me to a reputable CWM file that will work so I can just shove the .tar in Odin and hit start. And I can't flash ICS as there is a high probability I have the superbrick bug
EDIT: The CWM Restore file for download for the SGSII here www (dot) clockworkmod (dot) com/rommanager are not in even in the correct format for flashing with Odin, what do I do??
Some recoveries allow a cache wipe, while others don't.. Recovery menu [if you've looked up how to access it on your particular device] most certainly should have a factory reset option as well, so im thinking you haven't found its menu.. Again, cwm should be in img format. .tar sounds like someone else's backup. If your inexperienced with what you're gonna need to do to fix your phone, i'd definitely say a warranty claim. I know someone that got a brand new sgsii just a week before her warranty ran out, due to the same issue.
And i've never used odin..look up a guy named samersh72 on the forum, and his threads.
Hi all
I hope that I am posting in the correct place
I need help with my Galaxy S3 SGH-T999
Recently the phone died on me, it was stock rom and with the updates through some of the apps, the phone stopped working correctly. I don't use the phone for making calls, etc, but need it for pictures and a few other apps. The phone is from T-mobile.
I tried to reset the phone and that worked until all the updates were back on and then back to the same problem.
So I decided to put on a custom rom on the phone.
I have tried the following roms:
cm-14.1-20161225-NIGHTLY-d2tmo
I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME
RevolutionaryS5-V3
Slim-d2tmo-6.0.1.alpha.0.1-UNOFFICIAL-20160516-1346
I first installed CWM recovery and then transferred the roms over to the external sd car (also the internal card), went to boot manager (vol up) and installed the files.
It looked like the installation worked but when selecting reboot, the phone would not come back on.
I then loaded up Kies and reset the phone back to factory defaults and only then does the phone load back up after reboot.
Every time I try the custom rom - I run into the same problem
At first I thought the phone was bricked and found info about the jtag and then found something about using an SD card with the following image installed on it - tmobile-T999_4.3_debrick
With the SD card in the phone I can boot to either menus and also able to get the phone to boot to the slim-d2tmo rom. But when I pull the SD card, the phone won't boot. Nothing, no power, nada
I am not sure what I did wrong, followed the direction on the site and thought I did it correctly.
Not sure if I deleted some file, or partition needed or what. I would greatly appreciate some help with this.
Also I would like a custom rom that is stable and fast. I don't need all the bells and whistles but one thing I would like and that is for the camera to be able to take pictures using voice. I know the stock rom allows for this. Not essential but preferred.
Please help with detailed instructions.
Thanks in advance.
It,s amazing
Please elaborate. What's amazing.
Boot into download mode and confirm the model # of the phone. I see you tried to flash I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME which not for the the T999, it's for the gt-i9300.
I want to flash Ressurection Remix on my Samsung Galaxy S3.
I tried flashing twrp recovery through Odin 3.07, but, it didnt work. I even tried Odin 3.85.
The Android System Recovery 3e, simply refuses to budge.
Please advice.
Rraayy8 said:
I want to flash Ressurection Remix on my Samsung Galaxy S3.
I tried flashing twrp recovery through Odin 3.07, but, it didnt work. I even tried Odin 3.85.
The Android System Recovery 3e, simply refuses to budge.
Please advice.
Click to expand...
Click to collapse
OPen Odin, uncheck everything except f reset time. Flash TWRP. When you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, replace the battery, boot directly into recovery.