So I was having the issue with the settings menu force closing after I rooted the device.
This morning I've done a factory data reset, gone to turn the tablet on, and I'm not getting "The application OLS (process com.sony.nfx.app.ols) has stopped unexpectedly. Please try again.
Can't access the device, tried another factory data reset, can't flash a firmware as I can't access the device.
Not very happy at all.
But any ideas please?
**I can get into the settings menu and when I press the home button is when I get the OLS force close, so I assume it's the home launcher, I did remove it when my device was working.....
I can't access device storage either, even when my device is on - or ADB, but I can access an SD Card through the boot menu.
Well factory reseting doesn't restore anything you deleted from system, but wipe anything else you installed.. so there's the big problem.
On my tab, I can force a boot loop by holding volume down when booting (hold vol down for what seems like an eternity/till you are satisfied that it is boot looping).
ADB seems to work here, so you could potentially push a different launcher apk and get it going that way.
Thanks for the response Dan,
What I can do is start the device, there's no launcher there, but inbetween the force closes I can get into the settings, there's no force closes when I'm in there.
I connect the USB, ADB Devices and it shows, I can pull from the /system but not push.
As soon as I type ADB Shell, then the commands, it tells me "error: device not found"
Exit out of ADB Shell, ADB Devices again, and it's there - but ADB Devices when inside ADB Shell shows nothing.
I've tried all of the OTA packages in the other thread and nothing - I'm at a bit of a loss, i doubt Sony would work with me on this one, so It looks like I've got £349 of paper weight. Any ideas on the ADB? At least then I could push a launcher in.
The issue clearly is becuase there's no launcher.
I remove the default launcher from the /system/app folder and install ADW, the factory reset obviously removed it, hence there's no launcher...
What if the APK for ADW was made into an update.zip?
Would it flash when I hold down power + volume+, Update System from zip?
bummer
Not really sure what can be done if you deleted them from the system and the reset does not reinstall them.
Perhaps someone who has rooted can send them to you, but not sure how that would work.
I'll get in touch with Sony tomorrow, now I know that this is my own fault, but under the warranty they are still abliged to fix it, I certainly won't be rooting it again, thats for sure.
I hope they will help me if I'm honest?
Did you have a look at if ADB works for you in the forced boot loop state I mentioned? It could possibly do some extras from there that you can't otherwise.
Also just try sending a third party launcher in so it's doesn't have to go to system, perhaps it will let you write the file then. And hopefully auto - detect it upon booting .
Tried it Dan, if I attempt ADB Install launcher.apk, it starts installation then;
[1] Killed pm install /data....
I'm getting permission denied in every ADB command when in the Boot Loop.
Thanks anyway - I've emailed them, and been totally honest about what I've done.
I could swear all day - I've fixed it, my tablets working again, what a bloody relief. Thanks ADB!
I tried to duplicate your problem with adb :-
Typed ADB Devices - reports attached device OK
Typed ADB Shell - prompt changes to $
Typed ls - shows root of tablet
Typed cd system - changed to system directory
Then ls again then cd app then ls again - shows all system apps
I then typed ADB devices again and lost the connection to the tablet
It would seem that on my tablet at least that typing ADB devices whilst within the ADB shell breaks the connection with the tablet
Thanks for testing it praed0r, I'm pleased to know that it's not just me that had that issue.
It may be of use to someone, but what I did was mount the /system partition as rw using busybox.
Code:
adb shell
su
busybox mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
From there I removed the app that kept forceclosing, in this case it was OLS (or something like that)
I then mounted the /data drive with;
Code:
busybox mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /data
Then using cp instead of ADB Push,
Code:
cp /sdcard2/golauncher.apk /system/app/golauncher.apk
Rebooted the device and it all worked fine, GoLauncher booted as my default launcher.
For some reason it didn't like adb push, and would give me permission errors, but mounting as busybox fixed it all....
I changed the build.prop so that it would system update, it indeed does, but all STOCK apps (Sony apps) force close, it could be becuase of the framework.jar from the other thread, so I'll try and source one from a kind individual. Then I'll do the update and my system will be OK.
I'd consider myself very lucky this time, lesson learnt not to tweak with things.
I'll stick to the build.prop/local.prop tweaks for now
Any idea why the system apps aren't working, i've retraced my steps to before it happened, the only notable thing that would have an affect was changing the framework.jar?
Related
I'm in need of the stock kernal image and the clockwork recovery.zip file thingy.
NOT the zip verson of the kernal installer.
My situation, I was stupid and installed the voodoo thing, then for someone reason I tried to flash Froyo over Bionix with the voodoo kernal thing. It didnt work so I decided to deleted everything in clockwork. Then I was like omg I cant use clock work or boot my device (stuck on vibrant screen but I can get to odin and the stock recovery).
Later I read that voodoo stopped odin on the cm forum so I couldnt use it. Thats what some dude named viralblack said and theyre a mod so I'm guessing its true.
So my last 4 ideas are:
1)Try and flash a new Kernal Image in adb and hope it gets odin to work
2)Push the cw recovery to the phone
3)Run to the library and hope my computer is the problem
4)Pretend vb is wrong and keep trying the download screen thing
Sorry if this is in the wrong section but I guessed it could go here because I need some files....
flash Eugene's froyo that does not brick via Odin. he has instructions in his thread.
...and it's kernel NOT kernal people
Sent from my SGH-T959 using XDA App
kernel, sorry I guess?
Anyhow what if my pc doesnt notice the phone when its in download mode
RPGbig said:
kernel, sorry I guess?
Anyhow what if my pc doesnt notice the phone when its in download mode
Click to expand...
Click to collapse
Download the Samsung drivers, download ODIN, and then just follow the directions in the ODIN thread
Wow
You guys have nothing better to do than flame a newb?
If you spent half the time helping instead of flaming there MIGHT just be some people with a bit more knowledge than they had yesterday.
If you cant say something constructive/helpful --Why bother!
fcbarca17 said:
Download the Samsung drivers, download ODIN, and then just follow the directions in the ODIN thread
Click to expand...
Click to collapse
Push doesnt seem to work. Permission denied or something rather.
As I said in my first odin wont work, yes I did those things like 10 or so times.
You cant expect a newborn to know how to wipe themselves.
RPGbig said:
Push doesnt seem to work. Permission denied or something rather.
As I said in my first odin wont work, yes I did those things like 10 or so times.
You cant expect a newborn to know how to wipe themselves.
Click to expand...
Click to collapse
What do you mean "push doesn't work". Are you trying to push a file via adb? If you are getting permission denied errors, that is because you either do not have root access/permissions to write to the location you are trying to push to, or because the location you are trying to push to is mounted as read-only.
If you indeed have the necessary permissions (i.e., root), then `adb remount` will re-mount the device's partitions as read-write. If adb does not allow you remount the partitions in this manner, it is because you do not have the permissions to perform the duty.
If anyone is going to give any further help, though, you need to give us a bit more information. Can you access the device via adb? Can you boot into either download or recovery? (If you have adb access, you can usually boot into either of those with `adb shell reboot download` or `adb shell reboot recovery`.) Have you attempted to flash anything via Odin? What is the exact wording of the error messages you are receiving?
If you don't provide information, you won't receive any help. Vague responses such as "Permission denied or something rather" are useless because something rather can be any number of things. Also, attempting things without reading all of the information available beforehand is another way to ensure that people will be hesitant to give you help; this forum already has threads about where to locate the stock kernel image.
Also, instead of positing what-ifs such as "Anyhow what if my pc doesnt notice the phone when its in download mode", why don't you try putting your device into download mode and attaching it to a Windows computer with the proper drivers installed and Odin running, and then ask what the next step might be after you have attempted to do something?
People get angry about members flaming newbies for posting mistakes and asking for help, but if newbies looked for answers and read all of the information available before doing something they didn't understand (or only partially understood), then this wouldn't be a problem in the first place.
rpcameron said:
What do you mean "push doesn't work". Are you trying to push a file via adb? If you are getting permission denied errors, that is because you either do not have root access/permissions to write to the location you are trying to push to, or because the location you are trying to push to is mounted as read-only.
If you indeed have the necessary permissions (i.e., root), then `adb remount` will re-mount the device's partitions as read-write. If adb does not allow you remount the partitions in this manner, it is because you do not have the permissions to perform the duty.
Click to expand...
Click to collapse
Goalush Clockwork Recovery so I can flash Bionix.
What Happens:
1. Go into recovery
2. Connect to the phone with adb
3. I type 'adb push c:\update.zip /sdcard'
4. It says 'failed to copy `c:\update.zip` to `/sdcard/update.zip` : Permission denied
I type 'adb remount' its says ' remount failed: No such file or directory
rpcameron said:
If anyone is going to give any further help, though, you need to give us a bit more information. Can you access the device via adb? Can you boot into either download or recovery? (If you have adb access, you can usually boot into either of those with `adb shell reboot download` or `adb shell reboot recovery`.) Have you attempted to flash anything via Odin? What is the exact wording of the error messages you are receiving?
Click to expand...
Click to collapse
Yes, I can get into both.
I've download Froyo that doesnt brick. Unziped and got had the drivers from sansumg set up.
I usually type 'adb reboot download' to get into download mode for odin. Then when the phone shows the android guy with the shovel. Then my computer says that an unrecognized usb device has been connect.
This time I type 'adb shell reboot recovery' and its said
'-exce `/system/bin/sh` failed: No such file or directory (2) -'
rpcameron said:
If you don't provide information, you won't receive any help. Vague responses such as "Permission denied or something rather" are useless because something rather can be any number of things. Also, attempting things without reading all of the information available beforehand is another way to ensure that people will be hesitant to give you help; this forum already has threads about where to locate the stock kernel image.
Also, instead of positing what-ifs such as "Anyhow what if my pc doesnt notice the phone when its in download mode", why don't you try putting your device into download mode and attaching it to a Windows computer with the proper drivers installed and Odin running, and then ask what the next step might be after you have attempted to do something?
People get angry about members flaming newbies for posting mistakes and asking for help, but if newbies looked for answers and read all of the information available before doing something they didn't understand (or only partially understood), then this wouldn't be a problem in the first place.
Click to expand...
Click to collapse
RPGbig said:
Goalush Clockwork Recovery so I can flash Bionix.
What Happens:
1. Go into recovery
2. Connect to the phone with adb
3. I type 'adb push c:\update.zip /sdcard'
4. It says 'failed to copy `c:\update.zip` to `/sdcard/update.zip` : Permission denied
Click to expand...
Click to collapse
You have to be rooted.. But why would you even take the hard way to use clockwork? Just download it from the market..?
I have odin with all the files that will get u to stock of ur phone. Also the froyo files does not brick. So now i exactly dont know what u need. go cows
I messed up my phone and its stuck in a bootloop. I want to put that recovery on my phone so I can flash a new rom.
RPGbig said:
I messed up my phone and its stuck in a bootloop. I want to put that recovery on my phone so I can flash a new rom.
Click to expand...
Click to collapse
If your phone is stuck in a bootloop you need to flash your phone with odin
RPGbig said:
Goalush Clockwork Recovery so I can flash Bionix.
What Happens:
1. Go into recovery
2. Connect to the phone with adb
3. I type 'adb push c:\update.zip /sdcard'
4. It says 'failed to copy `c:\update.zip` to `/sdcard/update.zip` : Permission denied
I type 'adb remount' its says ' remount failed: No such file or directory
Click to expand...
Click to collapse
OK, if `adb remount` isn't working properly, then you have to manually instruct the system to remount the system partition as read-write. This is a little different from other Android devices, because Samsung insists on using their screwy RFS. On my device, the system partition resides at /dev/block/st19. If you can get an adb shell session, opened, you can verify it by running `mount`, and seeing which /dev node is assigned to /system. Then, manually remount the system partition with `mount -o remount,rw -t rfs /dev/block/st19 /system`; this must be done as root.
It does seem a bit odd that you are getting a permission denied error on /sdcard. Are you sure that /sdcard is mounted? You can verify the same way you check what /dev node holds you system partition. On my Vibrant, /sdcard is the mount point for /dev/block//vold/179:1 (yes, that is two slashes after block). So, the command to mount the internal SD card is `mount -o remount,rw -t vfat /dev/block//vold/179:1 /sdcard`.
Now those commands should ensure that you have both your system partition and SD card mounted as read-write. Now you can copy over the update.zip that contains ClockworkMod recovery to the root of your SD card (/sdcard) with `adb push drive:\path\to\recovery.zip /sdcard/update.zip`. I recommend specifying a destination filename for update.zip. Also, sometimes an adb push command requires the trailing / of a directory.
RPGbig said:
Yes, I can get into both.
I've download Froyo that doesnt brick. Unziped and got had the drivers from sansumg set up.
I usually type 'adb reboot download' to get into download mode for odin. Then when the phone shows the android guy with the shovel. Then my computer says that an unrecognized usb device has been connect.
This time I type 'adb shell reboot recovery' and its said
'-exce `/system/bin/sh` failed: No such file or directory (2) -'
Click to expand...
Click to collapse
This last statement looks like either your system partition is not mounted, or that it does not have a shell installed. From an adb shell session, check the /system/bin directory and see if there is indeed a shell binary there (either sh itself, or sh linked to another shell such as bash). If there is no /system, then it means that your system partition is not mounted, and you can follow the steps I previously mentioned to mount the system partition.
RPGbig said:
I messed up my phone and its stuck in a bootloop. I want to put that recovery on my phone so I can flash a new rom.
Click to expand...
Click to collapse
Can you boot into recovery using the VOL_DN and POWER method, or does the adb daemon ever come online during the bootloop? If so, then either boot into recovery from a powered-off state, or use the adb shell to boot it into recovery.
http://forum.xda-developers.com/showthread.php?t=810130
rpcameron said:
OK, if `adb remount` isn't working properly, then you have to manually instruct the system to remount the system partition as read-write. This is a little different from other Android devices, because Samsung insists on using their screwy RFS. On my device, the system partition resides at /dev/block/st19. If you can get an adb shell session, opened, you can verify it by running `mount`, and seeing which /dev node is assigned to /system. Then, manually remount the system partition with `mount -o remount,rw -t rfs /dev/block/st19 /system`; this must be done as root.
It does seem a bit odd that you are getting a permission denied error on /sdcard. Are you sure that /sdcard is mounted? You can verify the same way you check what /dev node holds you system partition. On my Vibrant, /sdcard is the mount point for /dev/block//vold/179:1 (yes, that is two slashes after block). So, the command to mount the internal SD card is `mount -o remount,rw -t vfat /dev/block//vold/179:1 /sdcard`.
Now those commands should ensure that you have both your system partition and SD card mounted as read-write. Now you can copy over the update.zip that contains ClockworkMod recovery to the root of your SD card (/sdcard) with `adb push drive:\path\to\recovery.zip /sdcard/update.zip`. I recommend specifying a destination filename for update.zip. Also, sometimes an adb push command requires the trailing / of a directory.
This last statement looks like either your system partition is not mounted, or that it does not have a shell installed. From an adb shell session, check the /system/bin directory and see if there is indeed a shell binary there (either sh itself, or sh linked to another shell such as bash). If there is no /system, then it means that your system partition is not mounted, and you can follow the steps I previously mentioned to mount the system partition.
Click to expand...
Click to collapse
I tried 'adb root' and then it said 'adbd cannot run as root in production builds'
By shell session do you mean 'adb shell'? No, I dont believe that works because I get 'adbd cannot run as root in production builds'
When you mean 'shell installed' you do I have it installed on the phone? If it isnt is there anyway I could do it now?
`adb push drive:\path\to\recovery.zip /sdcard/update.zip` didnt work and gave me 'c:\update.zip' to '/sdcard/update.zip': Permission denied
Can I flash /system via my pc onto my phone? or Use the external sdcard instead of the internal?
Dude, if your phone is stuck in a bootloop, you HAVE TO FLASH IT VIA ODIN. There's no other work-around.
RPGbig said:
I tried 'adb root' and then it said 'adbd cannot run as root in production builds'
By shell session do you mean 'adb shell'? No, I dont believe that works because I get 'adbd cannot run as root in production builds'
When you mean 'shell installed' you do I have it installed on the phone? If it isnt is there anyway I could do it now?
`adb push drive:\path\to\recovery.zip /sdcard/update.zip` didnt work and gave me 'c:\update.zip' to '/sdcard/update.zip': Permission denied
Can I flash /system via my pc onto my phone? or Use the external sdcard instead of the internal?
Click to expand...
Click to collapse
Why did you try `adb root`? I don't quite understand that.
A shell session would be `adb shell`, yes. On your computer's command line, invoke `adb shell`. You are now in a shell session. What does the prompt look like? Is it "#" or "$". If it is a hash, then you have root access via adb. If it is a dollar sign, then you do not have root access; try running `su` from within the shell session. If the prompt does not change to a hash, then you are stuck for the moment, because you do not have root access via adb, and therefore nearly all of the adb commands will not work.
By "shell installed" I was referring to a shell interpreter installed on your handset. bash is the most commonly installed Linux shell, and sh is usually just a pointer to bash. If your handset does not have either /system/bin/sh or /system/bin/bash (or anything similar), then you have an incomplete system, and it got messed up along the way with something you did.
But, since it seems that you cannot gain root access through adb, and therefore cannot (re)mount your partitions, you are basically limited in your options. All you can really do is put your phone in download mode, and use Odin to reflash a complete system (including a kernel image). I would also recommend that you use the repartition option in Odin to make sure that your partitions are reformatted and you are essentially left with a wiped and clean handest to start with.
(Lack of root access via adb has severely limited your options. You are basically left with Odin as your only avenue of recourse, unless you are willing to disassemble your device to get to the internal SD card.)
Have you opened yours? Is it an actual (micro) sdcard that can be taken out like the external one?
I typed 'adb root because typing 'adb' showed this
adb root - restarts the adbd daemon with root permissions
so I guess that was what you ment by root.
When I type 'adb shell' all it gave was - exec '/system/bin/sh' failed: No such file or directory (2) -
You need to stop trying to do it the hard way and just use Odin. If your phone is not being recognized then you need the correct drivers. Once installed, you should be back up and running within 5 minutes. Stop lollygagging and fix your phone already.
Hello all!
I realize that many many Android users have that issue and don't get any satisfying answer.
Let me introduce you my own experience. This may help and clear things up about Android safe mode.
It started one week ago when I got into a party and the barman threw lots of water at my friends and me. When I went to bed I didn't bother dry myself up, went straight to bed and slept.
When I woke up the next morning (with such a bad headache by the way ), my phone was acting really weird :
1 : it couldn't recognize my SIM card or any SIM card
2 : the little textbox "Safe Mode" had appeared
3 : My Volume up/Volume Down buttons weren't working anymore.
I rebooted the device several times, wondering why would it do that to me!! I googled that all day to understand what was happening to it.
All of the sudden, after a reboot, the Sim Card was recognized again and this problem was fixed. Yay!
Then, I tried all I could about the buttons (opened the device with youtube tutorial and a Torx screw driver T5) tried to clean the volume flex cable, dry it... Nothing to do.
The volume buttons still not responding, safe mode still here.
There are several reasons for safe mode to show itself :
-Holding a button while booting (depending on the device and manufacturer) : simply reboot the device to get back in normal mode.
-A previously downloaded and installed app is causing issues on the device (Android self protection) : you'll need to find that app and uninstall it to get back in normal mode.
-I ran into a forum where someone was explaing how changing one of his internal components that wasn't working anymore fixed his safe mode problem (mostly non responding buttons like my phone).
So I ordered a brand new volume flex cable for my HTC sensation and I am still wating for it (long delivery...) I'll let you know as soon as I replace the component if that has fixed it.
The problem is : in the meantime I just can't access non system apps (in other words : all origin apps, no others). I bought a smartphone to be able to do many more things on it than just call, text message or email...
So I found a solution about it (I am going to test it tonight and will let you know) :
You need to have a rooted device in order to install all apps that you need to run, even though Android is running under safe mode, into /system/apps location. This will "make believe" those apps are actually system apps and will force your device run them at boot.
How does this work?
You need to get ADB tool in order to push command shell to the device (because terminal emulator or other apps that ease root commands directly on the device can't be loaded... Thanks safe mode!!)
!!!!! Important !!!!!!! I haven't tested this myself yet but will tonight and will let you know on that thread, so watch it before doing anything you wouldn't understand.
from Adb terminal you'll need to get into the system partition and mount it as read and write :
adb shell
su
mount -o remount,rw /dev/null /system
give everyone permissions to write in that folder :
chmod 777 /system/app/
Then, you'll need to store the apks you need into your sdcard (wherever).
Then, copy all apps you need into the folder :
cp -a /sdcard/[pathtoyourapk/theapkyouwanttoinstall] /system/app/
reset the permissions on that folder :
chmod 755 /system/app/
mount -o remount,ro /dev/null /system
sync
Reboot the device :
reboot
You're done.
Don't hesitate correct me if I gave any wrong information, but trust me, I spent enough time on this problem to get self confident and write in here.
Thanks for your attention!
Regards!
Adding information
I tested it and it does work.
However I forgot something :
Once you've copied your apk into the system\app folder just chmod it with 644 :
chmod 644 /system/app/[yourapp.apk]
This will give the system and yourself access grant to the application.
There! =)
Hi
I've installed CM10.2 (last update) (http://forum.xda-developers.com/showthread.php?t=2499796) on my Archos 80G9. It also runs the SDE firmware from Archos (http://forum.xda-developers.com/showthread.php?t=1653566). So far, so good, it runs quite nicely, all things concerned. Here's a screenshot to the system info: https://www.dropbox.com/s/0ri8n4jb6gyrfz7/Screenshot_2014-11-17-20-56-01.png?dl=0
Now I'm trying to install X-posed Framework, but this won't work. When I try, I get an error that tells me /system can't be mounted. (Screenshot: https://www.dropbox.com/s/ryaryqkie023sl4/Screenshot_2014-11-17-20-40-16.png?dl=0 )
When I take a look is ES3 if the folder is mounted, it looks like this: https://www.dropbox.com/s/4kwv0ja16qz52tq/Screenshot_2014-11-17-20-49-21.png?dl=0 . I can't tick the other boxes here, I get the message "sorry, operation failed" when I try.
I've already tried to use the "mount -o remount,rw /" command, to no avail...
I have no idea how I have to fix this problem and if it's even fixable.
Does anyone have any idea? Thanks in advance!
Same here...
No solution for that yet.
Before you type the mount command did you type "su" first (without the quotes)?
Just opening up terminal gives you regular user permissions which will not let you run the mount command. You need to become root/superuser first and that's what su does.
Yes I did ... Terminal emulator gives a notification that It's been granted superuser permission, but it still doesn 't Work.
Sent from my Ascend Y300 using XDA Free mobile app
Can you send a screenshot of the "mount" comand and response?
Did the prompt change from $ to #? What was the output of "mount"?
If terminal doesn't work try with superuser adb (allow superuser not only from applications, but from adb). Connect to the device with "adb shell" and issue this command.
Hi, thanks for your response. Here are two screenshots: the first is of the mount command in Terminal Emulator, the second of the same via abd shell. No results.
Very strange, since filesystem seems to be remounted rw Ok.
In fact, I've installed xposed some two days ago on 101g9/cm10.2, so this should work.
Let's try to sort it out.
1) What version of xposed do you try to install? I've used latest stable (2.6 IIRC).
2) Do you use "standard" installation mode in xposed settings (just under the popup window on your screenshot)?
3) Try to issue the following commands in shell after remounting "/" (terminal or adb - doesn't matter)
# touch /system/bin/mytest.tmp
# ls -la /system/bin/mytest.tmp
If the file is created Ok, then the filesystem is mounted read-write correctly.
You can delete this file afterwards with
# rm /system/bin/mytest.tmp
4) Did you grant permanent or one-time superuser permission for xposed? If one-time, try permanent: it can be so, that "cp" fails due to lack of superuser permission.
Bor-ka said:
Very strange, since filesystem seems to be remounted rw Ok.
In fact, I've installed xposed some two days ago on 101g9/cm10.2, so this should work.
Let's try to sort it out.
1) What version of xposed do you try to install? I've used latest stable (2.6 IIRC).
2) Do you use "standard" installation mode in xposed settings (just under the popup window on your screenshot)?
3) Try to issue the following commands in shell after remounting "/" (terminal or adb - doesn't matter)
# touch /system/bin/mytest.tmp
# ls -la /system/bin/mytest.tmp
If the file is created Ok, then the filesystem is mounted read-write correctly.
You can delete this file afterwards with
# rm /system/bin/mytest.tmp
4) Did you grant permanent or one-time superuser permission for xposed? If one-time, try permanent: it can be so, that "cp" fails due to lack of superuser permission.
Click to expand...
Click to collapse
1) I had 2.7 Experimental, so I uninstalled it and installed 2.6 Stable instead.
2) I do indeed use the "classical" option for installing Xposed.
3) Tried it, gave the following result: the file is created in /System/bin, so I guess /sytem is mounted okay. (see screenshots)
4) I use SuperSU, XPosed had root acces (see screenshot)
Seems to me /system is mounted fine, but Xposed just doesn't know it...
Ok.
The problem is with xposed, obviously.
For me, it complained that it can not remount /system (obviously), but then installed Ok.
So, what I would do
1) Check the filesystem mounts. May be, for some reason, you have /system mount (quite improbably, but nonetheless). Try in the terminal
# mount
It will show a list of all active mounts with the following format
[what is mounted] [where mounted] [blah-blah and stuff]
For example, from anothe device
/dev/block/platform/hi_mci.1/by-name/system /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
You can see that something is mounted at "/system" readonly ("ro" attribute)
2) Check if the /system/bin/app_process.orig already exists
# ls -la /system/bin/app_process.orig
3) Try to use logcat to obtain info. That is tricky
a) On the PC issue command "adb logcat > logcat.txt"
b) Start xposed installer, try to install, get an error
c) on PC press Ctrl-C
Bor-ka said:
Ok.
The problem is with xposed, obviously.
For me, it complained that it can not remount /system (obviously), but then installed Ok.
So, what I would do
1) Check the filesystem mounts. May be, for some reason, you have /system mount (quite improbably, but nonetheless). Try in the terminal
# mount
It will show a list of all active mounts with the following format
[what is mounted] [where mounted] [blah-blah and stuff]
For example, from anothe device
/dev/block/platform/hi_mci.1/by-name/system /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
You can see that something is mounted at "/system" readonly ("ro" attribute)
2) Check if the /system/bin/app_process.orig already exists
# ls -la /system/bin/app_process.orig
3) Try to use logcat to obtain info. That is tricky
a) On the PC issue command "adb logcat > logcat.txt"
b) Start xposed installer, try to install, get an error
c) on PC press Ctrl-C
Click to expand...
Click to collapse
Alright, did all of it.
1) Don't fully understand what is listed here, but in the first screenshot is the list of mounts.
2) Checked it, doesn't seem to exist, see second screenshot.
3) Logcat is attached.
Ok, it appears that I got the problem. Need a little time to think how to solve this.
The problem is rather technical. In newer androids supersu has isolated filesystem mounts for different processes.
It means that if you remount filesystem rw in one process, it (read-write-ness) is not accessible to the other process.
I have a little older cm10.2 build (for low-memory devices), perhaps, this was enforced later.
http://su.chainfire.eu/#how-mount (3.5)
So you're saying there's a good chance that if I install version 22_12_2013-13_29_20 (which i was planning anyway), instead of the latest one, the problem could be fixed?
Hmm, I installed the previous version of CM10.2, the problem seems to be persisting...
I noticed something today. I can create and remove files in /system using the emulator. I can't however do this using ES3 file explorer, even though it has root access. I was trying to edit the build.prop file, but it wouldn't let me save my changes.
I then tried to copy a file to /system in es3, this didn't work. Creating a tmp file using emulator did work. Seems I do have rw access to /system, but not with all apps...
I noticed something today. I can create and remove files in /system using the emulator. I can't however do this using ES3 file explorer, even though it has root access. I was trying to edit the build.prop file, but it wouldn't let me save my changes.
I then tried to copy a file to /system in es3, this didn't work. Creating a tmp file using emulator did work (permission denied). Seems I do have rw access to /system, but not with all apps...
Well, it seems like what I've said, filesystem mount encapsulation.
I've noticed one thing - you are using the standalone supersu application. And for me superuser mode is integrated in the system settings near the developer options. May be this is the case, internal superuser is patched already.
Alright, I'll uninstall superSU for now, give it a go with the built-in superuser app. I'll let you know!
Supersu application, theoretically, could have replaced libsuperuser and other stuff integrated in the CM.
So, if just uninstalling does not work, perhaps it will make sense to reinstall CM itself.
P.S. I have mixed feelings with CM. On the one hand it is definitely more fluid, than 3.* or 4.* stock ROMs. On the other hand deep sleep works, well, strange, and the tablet sometimes freezes in the sleep or turns off by itself.
Yes, I have enabled deep sleep, but the battery drains definitely faster in the sleep. For me it is essential, since I mostly use it as a amazon kindle / google books / pdf reader terminal. And most of the time it just sleeps.
Bor-ka said:
Supersu application, theoretically, could have replaced libsuperuser and other stuff integrated in the CM.
So, if just uninstalling does not work, perhaps it will make sense to reinstall CM itself..
Click to expand...
Click to collapse
Eureka! I re-installed CM, issued the mount-command i used earlier and installed X-posed! I used the built-in superuser app, no such problems as before. I did have to issue the mount-command, but that isn't a problem Is it normal I have to re-issue the mount-command each time I want to access /system rw?
Thanks a million! I can't believe it was something this trivial But I'm so glad it's solved, thanks!
Bor-ka said:
P.S. I have mixed feelings with CM. On the one hand it is definitely more fluid, than 3.* or 4.* stock ROMs. On the other hand deep sleep works, well, strange, and the tablet sometimes freezes in the sleep or turns off by itself.
Yes, I have enabled deep sleep, but the battery drains definitely faster in the sleep. For me it is essential, since I mostly use it as a amazon kindle / google books / pdf reader terminal. And most of the time it just sleeps.
Click to expand...
Click to collapse
I don't use the deepsleep-option. I do use Greenify to ensure certain apps (like Youtube or Chrome) aren't active in the background. Boot manager to be sure only essential apps boot in the first place. This seems to save me some battery life. Airplane mode as well.
I got this tablet from my dad because it was so slow he couldn't work with it. Even after factory reset, it very quickly became sluggish again. With CM, it feels like it's a new tablet. So no doubts about CM for me
I do have another issue: My pc won't show the tablet in explorer. I can access it via ADB, but I can't access the storage via explorer... I suppose I best start a new topic for that...
Glad the issue was solved. I wonder why the superuser application didn't work.. Deepsleep - it allowed the tablet to lose, say, 10-15% charge during a week sleep. Very handy if the tablet is used not often - really miss it.
Explorer connection - if I remeber correctly, you should go to settings -> storage (where the size of apps/pictures etc is shown). Then press the three dots in the upper right corner, select "usb computer connection" and select MTP.
P.S. I wonder also if CM12/Android 5.0 in the "development" section is worth a try...
Dear users,
I read multiple threads throughout internet and couldn't find working solution. My lg with kitkat 4.4.2 had lagged so I removed battery. After this phone is boot-looping with startup animation forever.
I can explore files with adb shell when phone is in recovery mode but don't have access to dalvik-cache. Command "su rm -rf /system/data/dalvik-cache" gives "permission denied nor "adb backup -all" cause "unlock your device and confirm...".
I cannot root phone by copying SuperSu files into /system/app. The command "su cp.. " gives no answer and later when exploring /app there's no SuperSu program.
I was trying to explore through sudo nautilus on Ubuntu during using one of rooting tutorial but the phone just disappears in the list of mounted devices.
I have important data like phone contacts, messages and some pictures inside phone memory. I didn't backup all of them formerly.
Any ideas?
likkufri said:
Dear users,
I read multiple threads throughout internet and couldn't find working solution. My lg with kitkat 4.4.2 had lagged so I removed battery. After this phone is boot-looping with startup animation forever.
I can explore files with adb shell when phone is in recovery mode but don't have access to dalvik-cache. Command "su rm -rf /system/data/dalvik-cache" gives "permission denied nor "adb backup -all" cause "unlock your device and confirm...".
I cannot root phone by copying SuperSu files into /system/app. The command "su cp.. " gives no answer and later when exploring /app there's no SuperSu program.
I was trying to explore through sudo nautilus on Ubuntu during using one of rooting tutorial but the phone just disappears in the list of mounted devices.
I have important data like phone contacts, messages and some pictures inside phone memory. I didn't backup all of them formerly.
Any ideas?
Click to expand...
Click to collapse
Could you elaborate on "disappears?" Usually if something is present and suddenly disappears in lubuntu, that means the connection was broken (either physically or by software, such as when switching drivers by running a command). Anyway, have you tried letting it sit for a day or something? I figure the reason it "lags" might potentially affect booting time.
It's also helpful to know what data you want out of it. Some things need root, some things don't need root. If all you want is file X in user space, I imagine that'd be infinitely easier than trying to get a random bootloader setting.
?? Get Temp root, mount, as soon as I run "rm /data/su.img >NUL" phone reboots ??
I know little to anything. Maybe I am missing some attributes or a watchdog app I am not aware of? I have been trying to root a galaxy s6 SM-G920AZ it also has a locked bootloader as well. I have gotten to the point I have tried every root app including Chinese ones. I found "MobileGo" they go by many names and I tried one of the well-known ones and it got half root in 1 time. I give it a try within 30 seconds it says root. I start loading supersu and busybox and rebooted did some looking around came across this g920a and g925a root
A boot root does not work any longer for me. But the SuperSU manager .bat file looked good except a su here a cd there. I tried it as a batch no go. So I did it line for line and as soon as I get to "adb shell rm /data/su.img >NUL" within the batch file. Phone reboots and root is gone. What am I missing? Is there a watchdog app or am I mounting wrong? Below I will paste the commands I ran via adb I could run on a terminal. I never post but this is making want it even worse.
Phone is the SM-G920AZ I have it running 6.0.1, SP = June 1, 2016, Kernel Jun 8th 2016. Build = MMB29K.G920AZTUU4CPF2. Bootloader locked down. No Oem Unlock.
Procedure: Using a 1 click root pc app seems to get root after a wipe / reset within 45 seconds. I am getting 2-3 temp roots before I reset brings it back down to a minute or less. Then I connect via adb below are commands I have run than the last one phone reboots.
adb wait-for-device
adb shell
adb shell su
adb shell mount -o rw,remount /system
adb shell mount -o rw,remount rootfs /
adb shell cd data
adb shell rm /data/su.img >NUL <---- As soon as I send it the screen goes dark.
Like I said I do not know a lot. So it may be something basic or goog is throwing more roadblocks on the opensource I did the search here and on google but could not find much with a good timestamp. 2011 was a while back. Thanks for any info I am going to return to searching myself.