Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
humaila said:
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
Click to expand...
Click to collapse
1) You didn't read instructions... Why would you try to root a XXLP1 >> ICS << Rom with a KI3 >> Gingerbread << CF-Root ? It states in Chainfire's thread to find the matching letters and root it with the corresponding kernel... You DIDN'T bother to read.
2) Like the poster above said, try entering download mode, and flashing stock ROM again... If you can't, read >> 4)
3) You can try with a USB Jig, though i doubt it will help...
4) Seems like it's completely bricked, probably will need jtag repair, or maybe you can get lucky with warranty + samsung repair service
5) Learn to read...
E_Goldstein said:
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
Click to expand...
Click to collapse
this is what I want to do next
thx
sopheaknhek said:
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
Click to expand...
Click to collapse
nope, it's completely dead
@gr4ndm4st3r_bl4ck
yes, my bad
do you think that if I send it back from where I bought it and lie them that it didn't start at all, and that I didn't do anything they will replace it?
it is worth it to try or they will figure it out?
thanks
You could send it into your carrier/Samsung for repair & they might repair it anyway, but there's a much greater chance they'll charge you for it.
A jig is very unlikely to work, but for the sake of a few dollars is worth a try.
Do a search for JTAG repair on here/Google (here's one to get you started). This will probably be cheaper than having it repaired by Samsung/whomever does their repairs in your country.
Which option you choose is obviously up to you.
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
gr4ndm4st3r_bl4ck said:
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
humaila said:
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
Click to expand...
Click to collapse
No problem dude, glad you managed to get it under warranty Just make sure you read the instructions carefully next time
Related
hi everybody!
all the steps below were taken from galaxys2root.com as well as the files
i have i9100 with a stock rom 2.3.4 (ki4) (and 1.4gb of free memory-maybe that was the problem).
yesterday i rooted it (everything was fine) and then i installed CWM recovery 4.0.1.4 through odin v1.85 (went fine too) and then on my way to find myself a new rom i decided to backup my current one with cwm. then i entered cwm by pressing vol-down+pwr+home and hit "backup". it backed up the system and then moved on to the data and thats where it got stuck for like an hour.... from the guide i understood that it shouldnt take more than 10 min- 15 min top so i figured that im having a problem, i tuned off the phone by pressing pwr button and turn it back on, then the phone got stuck on the sgs2 screen with the triangle so i turned it off again----> this time it didnt came back on, and not responding to download mode neither to polling battery out or not even by connecting to usb and charger- just dead!
how is it possible? and what should i do to bring it back to life? (and myself)
thank you very much(please help...), and sorry for the long text and the bad english
do you have usb jig with you?
i assume you brick your phone.
read my thread http://forum.xda-developers.com/showthread.php?t=1402286 carefully. anyway, usb jig will not harm your device
No download mode = try jig. Jig doesn't work = JTAG repair by 3rd party repairer (cheaper option) or JTAG repair my Samsung (more expensive option).
thank you,
no dont have one but i ordered from ebay.
is there a chance that my battery died and as a result of the two my phone wont respond?
Possible but highly unlikely. I guess you might as well try a new battery, at worst you'll have a spare when you get the phone repaired.
Fairly common problem go to forum xx download something and follow the instructions dont work go to a totally different forum and ask why ???
CWM 4 very old .
vol-down+pwr+home and hit "backup why ??? thats download mode
My guess would be wrong instructions/firmware .
The other question to ask is it a i9100 or a different version .
jje
i really hope thats the problem, im going to a friend now to try with his battry.
but really how is it possible that my phone is bricked when i didnt even try to flash a new rom, and more than that it happened in the backup process when all the cwm does is a copy operation... so what really had happened?
JJEgan said:
Fairly common problem go to forum xx download something and follow the instructions dont work go to a totally different forum and ask why ???
CWM 4 very old .
vol-down+pwr+home and hit "backup why ??? thats download mode
My guess would be wrong instructions/firmware .
The other question to ask is it a i9100 or a different version .
jje
Click to expand...
Click to collapse
to be honest i was too lazy to search here (which im not going to be now)
thats what he was doing in the video (it did went in cwm)
and my phone is i9100 i bought it in the UK
Wrong firmware faulty firmware wrong instructions any number of things can go wrong with a flash . But it is very odd that it happens in backup recovery yes but backup very rare .
jje
JJEgan said:
Wrong firmware faulty firmware wrong instructions any number of things can go wrong with a flash . But it is very odd that it happens in backup recovery yes but backup very rare .
jje
Click to expand...
Click to collapse
so there is a slight chance that its the battery right?
IIIMJRIII said:
so there is a slight chance that its the battery right?
Click to expand...
Click to collapse
no, there is not.
Sent from my GT-I9100 using xda premium
ok the battery swap doesnt work so its not the problem,
any other ideas??? (except usb jig and jtag)
thanks
Jig <=1% chance of getting you into download mode, JTAG = 100% chance of fixing it. Other options = 0.
MistahBungle said:
Jig <=1% chance of getting you into download mode, JTAG = 100% chance of fixing it. Other options = 0.
Click to expand...
Click to collapse
I should say jog = 50% chances of getting into download mode. JTAG is more like a solution for hard brick(totally unresponsive, bootloader totally mess up, brain system totally corrupted).
Base on my understanding, getting yourself a hard brick is harder than finding a needle in a haystack. If you go through zedomax(galaxys2root.com owner), he mentioned that he flashed all his android device countless time. All he got is just a couple of soft brick. Never a hard brick. Don't waste your money first. Invest on a cheap usb jig which only cost around 2 dollar, compare to JTAG services which cost 50 dollar.
If usb jig doesn't work, try to go for warranty , see whether they charge you or not. If warranty doesn't cover you and cost less than 50 dollar to repair, go for it.
Only go for JTAG if every effort above don't work.
Warning: JTAG is just a service that reinject Samsung firmware into your device. If your phone has hardware failure, I don't think they can help. Unless they provide hardware repair now. If you wanna be sure, email or call them up to see if they provide hardware repair/replace as well, just in case it is a hardware failure cases.
Sent from my GT-I9100 using xda premium
i know its a very rare situation but it happened. I've tried the jig and it didnt work, then i decided to send it back to the store and they told me they have sent it to the manufacturer, now im waiting...
i bought my samsung galaxy s2 this week. i tried to install jally beans to it....
using Odin i tried to install cmw recovery mode.
after restert i got a huge problem. my phone is not working. stuck with a black screen...
but still getting heat,
nothin happens i tried to connect to computer.... no result
hold power+vol up+home button.... no result,
please help me... its a new mobile i used it only for two days
many thanks in advance...
Download any stock ICS rom, hold VOL DOWN, home and THEN power and flash rom via odin
Nazwan ali said:
i bought my samsung galaxy s2 this week. i tried to install jally beans to it....
using Odin i tried to install cmw recovery mode.
after restert i got a huge problem. my phone is not working. stuck with a black screen...
but still getting heat,
nothin happens i tried to connect to computer.... no result
hold power+vol up+home button.... no result,
please help me... its a new mobile i used it only for two days
many thanks in advance...
Click to expand...
Click to collapse
Bro please watch this then give us some more info..
PS: Did you install CWM through Odin? Why on earth would you do that! Also if you wiped your device on ICS using CWM you may be up sh%t creek without a paddle, because your device might be permanently hard bricked
Nazwan ali said:
i bought my samsung galaxy s2 this week. i tried to install jally beans to it....
using Odin i tried to install cmw recovery mode.
after restert i got a huge problem. my phone is not working. stuck with a black screen...
but still getting heat,
nothin happens i tried to connect to computer.... no result
hold power+vol up+home button.... no result,
please help me... its a new mobile i used it only for two days
many thanks in advance...
Click to expand...
Click to collapse
Like said here before, if you installed CWM on an unsafe Kernel (usually Stock Kernel present on 4.0.4 and 4.1.2 Stock Firmware) and after that wiped your data/cache etc. there is a good probability that you hard-bricked your device. Not even JTAG will help, if it`s the eMMC hardbrick.
Try to get into download mode and flash a Stock 4.0.3 Firmware and if you can`t then try a USB Jig to get into download mode and if that doesn`t work you probably hardbricked your device as described above
Read this on more info about eMMC superbrick:
http://forum.xda-developers.com/showthread.php?t=1756242
details
Yes!!! I do believe that I know don't much about android. because I am very new at android... that's why I am bagging for u guys help.
I hope u Guys will teach me how to fix this situation.
I Used Odin 3 1.85 to install CMW. While the installation process taking place an error occur. and automatically shut down. show up an message
"firmware upgrade encountered an issue. try to connect kies...." after 10-15 mins showing this message
display gets black and stuck. i tried everything that is possible to me. press and holding power+VOL up+home together, leave it for charge etc.
but nothing works
COULD ANYONE HELP ME ON THIS SITUATION. :crying:
As said before, Try power + volume Down + home and flash a stock firmware through Odin
And is there still any life at all? What about when charging. Is there the charging animation?
Also maybe read through this? https://t-mobile.jive-mobile.com/#jive-discussion?content=/api/core/v1/discussions/27132
Sent from my Galaxy SII
re
No charging animation, nothing happens when when i press those buttons....
no download mode, recovery mode.
i think it is HARD BRICKED...
Nazwan ali said:
No charging animation, nothing happens when when i press those buttons....
no download mode, recovery mode.
i think it is HARD BRICKED...
Click to expand...
Click to collapse
hardbrick in less than a week? blamesamsung PP
you can try smashing the phone at a samsung repair service manager
Unexist6969 said:
hardbrick in less than a week? blamesamsung PP
you can try smashing the phone at a samsung repair service manager
Click to expand...
Click to collapse
Why is it Samsungs fault.. You have to take the risks of flashing stuff on your device. This guy obviously did not do his research...
Sent from my GT-I9100 using xda premium
Exactly. Hardly Samsung's fault when 'tards don't RTFM (which seems to be happening a lot more than it used to around here).
kilometers4 said:
Why is it Samsungs fault.. You have to take the risks of flashing stuff on your device. This guy obviously did not do his research...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
re
So, there is no hope to repair my phone.
Android sucks......... if it is an iphone I can handle it my self
Oh yes. Android obviously sucks given you didn't have the cerebral matter to do your research before you started doing things that could potentially trash your phone
Only one thing is to blame in this instance. And that's you.
thnkx
Thank you guys, I appreciate your help...
it helps me a lot. I will never ever forget about this helpful forum.... i AM LEAVING THIS FORUM WITH A HAPPY FACE. :laugh:
Remember to switch off the lights on your way out....
Nazwan ali said:
So, there is no hope to repair my phone.
Android sucks......... if it is an iphone I can handle it my self
Click to expand...
Click to collapse
I love comments like this. Well if you don`t read properly how and what to flash at what time to your device and just do as you think is right then you are going to end up with a hardbrick. That`s nobodies fault but yours. Why did you buy an Android phone in the first place if you can handle an IPhone better?
Nazwan ali said:
Thank you guys, I appreciate your help...
it helps me a lot. I will never ever forget about this helpful forum.... i AM LEAVING THIS FORUM WITH A HAPPY FACE. :laugh:
Click to expand...
Click to collapse
If you have an hardbrick and you can`t even get into download mode, what do you expect people to do? We are normal human beings here, there are no miracles here. If you have an hardbrick, you can try to repair it via Jtag or send it to a Samsung service center if you are still on warranty but if you complain about Android and how much it sucks you won`t be making many friends here, since this is an Android community.
Dear Forum members i am new to this forum please help me to boot up my Phone :
After rooting using odin i have installed custom rom all working fine later tried to install another using odin selected .PIT file & re partition was checked in the middle Odin stopped responding disconnected the phone & phone stopped as attached image later battery empty. Now its completely dead no light no logo no boot sign tried to enter download mode, recovery mode, connecting to pc using kies, Odin nothing working.
Please help me to get the phone back to working
Thanks in advance
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Cosmic Blue said:
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Click to expand...
Click to collapse
Thanks for quick reply. can you please tell me where Jtag is available in India people who do it?
Thanks in advance.
For the first time i used forum and its really helpfull.
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
chetankalburgi said:
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
Click to expand...
Click to collapse
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
ctomgee said:
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
Click to expand...
Click to collapse
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
@OP: I'm with this guy. Try a usb jig before jtag.
chetankalburgi said:
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
Click to expand...
Click to collapse
Customer service may not know but if you talk to the technician he will know but may not want to do it as they will not make as much money as replacing the motherboard.
If you check the service manual that are posted on in this forum. one of the steps before replAcing the motherboard is using jig then jtag before you replace MB.
Hello!
I have big problem . I try to flash this http://forum.xda-developers.com/showthread.php?t=1573392 and root phone , but then odin stuck at the set partition i pull off the battery but now phone wont turn on.
Help me please because this is not my phone
Thank you
What phone has your boyfriend got.Your either flashing wrong rom or your in the wrong forum.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
What phone has your boyfriend got.Your either flashing wrong rom or your in the wrong forum.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Click to expand...
Click to collapse
He have i9100 2.3.3 . I flash it correctly because i do this many times on my i9000
I just wanna come back to download mode but i cant because phone does not respond on nothing :S
Its phone " broken " now ?
Nemivsek said:
He have i9100 2.3.3 . I flash it correctly because i do this many times on my i9000
Click to expand...
Click to collapse
Are you trying to be funny,or are you too stupid to understand what I said.
Why are you flashing a i9000 rom on a i9100 phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Are you trying to be funny,or are you too stupid to understand what I said.
Why are you flashing a i9000 rom on a i9100 phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------[/QUOT
Oh no :S All the time i was thinking that this " http://forum.xda-developers.com/showthread.php?t=1573392 " is for 9100 but now i look again and i see that is for i9000
How i was so stupid : / I just wanna do this fast and i dont looked good what i downloaded :S I screw all
Click to expand...
Click to collapse
"It's an I9100 and I know I'm flashing the right ROM as I'm always flashing my I9000".
No need to call her stupid.
@ OP tell us what have you tried to flash?
Edit: So you followed an I9000 thread and you flashed another device's ROM onto your bf's device.
You also pulled the battery while it was flashing.
Can you at least get to download mode?
Second Edit: no, you can't, get a usb jig and get ready to have it jtagged.
No need to post again what she said,I read it the 1st time around.
Maybe edit no.3 could maybe hint/ advise at possible warranty.
Maybe include a lame pic too.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Now I can't edit thanks to you...
No memes...it doesn't call for it...
So...you're calling her stupid just for kicks? That's better than being slow I guess....
Be my guest, elaborate on the warranty, it's gonna be fun.
Go ahead
I think the only hope is to make home made USB Jig....
As long as there's hope...
You can buy it, you can make it, you can tell your bf what you did and ask him if his warranty is still good.
You still got options.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
As long as there's hope...
You can buy it, you can make it, you can tell your bf what you did and ask him if his warranty is still good.
You still got options.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
He know already because he is with me right now... He will give phone to someone else who know alot about phones..
Btw my home made usb Jig dont work maybe i make it wrong but i looked all steps how to make it and im pretty sure i do it right
3 100K resistors on pin 4 and 5...
http://shrani.si/f/2Y/I/3tCN5aD3/fotografija0193.jpg
I dunno the specifics of the jig, I assume you followed the thread.
Try this:
One of you must hold the battery (it's almost a 2 man job) while the other presses the download combo (Vol Down + home + power ).
While pressing those buttons the person holding the battery must insert it (at the same time the combo is being hit).
See if it boot into download mode.
If not, start thinking jtag.
Warranty, not an option I presume.
Sent from...this is not even my S2
gastonw said:
I dunno the specifics of the jig, I assume you followed the thread.
Try this:
One of you must hold the battery (it's almost a 2 man job) while the other presses the download combo (Vol Down + home + power ).
While pressing those buttons the person holding the battery must insert it (at the same time the combo is being hit).
See if it boot into download mode.
If not, start thinking jtag.
Warranty, not an option I presume.
Sent from...this is not even my S2
Click to expand...
Click to collapse
Ok my USB Jig work on my mothers phone , but not on S2 this is now big problem :S I think phone is ruined :S
I will try this metod with battery ..
I will try this metod with battery ..[/QUOTE said:
It doesnt work :S
Click to expand...
Click to collapse
Jtag.
Sent from...this is not even my S2
Yeah , no other option here :/
Can you give me link for some cheap jtag programmer ? Or its better to give phone someone who have jtag box and i pay him ?
Yeap, you need to find someone who does jtagging.
A couple of guys started a thread about this info, it was based in India; I don't know if they expanded the grid.
Sent from...this is not even my S2
Hi there,
Firstly sorry if I have posted in the wrong place, i'm not too good with forums and or technology. About two weeks ago, my sister had passed me down her old Samsung Galaxy S2 which she had been using for more than a year. She's had no problems with it what so ever. Up until today, I was browsing the internet, when the internet 'app' crashed and gave me a pop up saying 'internet browser has stopped responding' or something to that affect. It then followed by a black screen where I was not able to do nothing apart from stare at the screen. I popped out the battery, waited a couple of minutes and put it back in. The screen came on with the Samsung logo, but nothing happened from there on, it was frozen. So I repeated the process one more, and now the phone does not turn on at all! I really hope someone can help me out here.
The phone has never been rooted/flashed or had anything done with it.
I have tried leaving the battery out for a couple of hours, still nothing.
I've also swapped batteries and nothing happened.
Tried booting in recovery/download mode and nothing happened either.
I've also tried connecting it to my PC where nothing happens.
I'm hoping someone can help me here, I've only had the phone for two weeks and it's already broken! My sister had it for a year and no problems! Bump.
Thanks in advance,
So can you boot into recovery or download mode? Without either of those two there's nothing you can do apart from take it to a service centre. If you have download mode then you can flash a stock ROM using Odin.
Else, do you have warranty still as it's a year old? If you do, take it to the service centre under warranty.
Sent from a galaxy far, far away
Tried a Jig to see if it enters Download mode?
"To err is human, to forgive is divine."
Sent from my SGS II
make sure ur battery points are not loose .. recently a user tried everything and lastly came to know that the 3 points were loose...
Man calm down try d combi 1st
Keep power home n vol up pressed it'll switch on then off then wil boot in recovery keep it pressed til it boots in rcvry.
Try dis n post will b helpful for helping
Hit thanks if I helped u
A click for u but rep for me
Sent from my Rooted LT26i using xda premium
Hopper8 said:
So can you boot into recovery or download mode? Without either of those two there's nothing you can do apart from take it to a service centre. If you have download mode then you can flash a stock ROM using Odin.
Else, do you have warranty still as it's a year old? If you do, take it to the service centre under warranty.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Hi, no I can't boot in to download more or recovery mode, and the phone is out of warranty.
Thanks anyway.
immortalneo said:
Tried a Jig to see if it enters Download mode?
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
Sorry if I sound like a noob, but what is a jig?
Thanks
Are you sure it's out of warranty? Samsung offers a 2 year warranty in some countries (afaik everywhere in the EU)
My Wife says I'm a phone geek.....
I'd have to agree.....
Click the link in my signature and look at the section for 'no download mode'.. Try that section. Some users report being able to boot into download mode after trying those things.
Edit: And look on eBay for 'i9100 usb jig'. Its a way of attempting to force into download mode
Sent from a galaxy far, far away
Hopper8 said:
Click the link in my signature and look at the section for 'no download mode'.. Try that section. Some users report being able to boot into download mode after trying those things.
Edit: And look on eBay for 'i9100 usb jig'. Its a way of attempting to force into download mode
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Thanks for the quick reply, unfortunately none of those methods worked for me, i'll try the USB jig and report back. If that doesn't work i'm guessing the motherboard is the problem right? Is Samsung able to repair the phone for me even if its out of warranty but with a cost? If so, how much do you think it will cost?
Thanks
You tried all of them in 15 minutes? Give them another go, it can take a few goes sometimes if you don't get it quite right. Otherwise, yes try the jig, but don't pin your hopes on it. Yes, they can repair it. The other (cheaper) option is to buy a handset with broken screen off eBay or similar and switch your motherboard. I'm sorry, I don't know the costs :/
Sent from a galaxy far, far away
Hopper8 said:
You tried all of them in 15 minutes? Give them another go, it can take a few goes sometimes if you don't get it quite right. Otherwise, yes try the jig, but don't pin your hopes on it. Yes, they can repair it. The other (cheaper) option is to buy a handset with broken screen off eBay or similar and switch your motherboard. I'm sorry, I don't know the costs :/
Sent from a galaxy far, far away
Click to expand...
Click to collapse
A little solution
Plug in ur usb to the PC as the device is off....it should remain off for this...
Plug in and see if its charging via pc.....As for it to charge..it has to go through the repair which happens internally without you need to do anything...
A triangle should appear before charging icon appears..As it appears,, just right after that flash ur rom via odin disconnect dont boot now wait n again do the usb charging trick.....
Then boot it should probably be working up again..Well it worths for a try.......
Do it n post it.
Tried rooting my s2 using odin. went into download mode then connected the phone. and clicked start. according to the instructions for rooting from youtube , it said the phone would restart after it said PASS on Odin. After it showed PASS it didnt restart even after a very longtime. so i disconnected.
Now i get the samsung logo with a triangle below. I m able to go to download mode.
Pls help guys
vixter991 said:
Tried rooting my s2 using odin. went into download mode then connected the phone. and clicked start. according to the instructions for rooting from youtube , it said the phone would restart after it said PASS on Odin. After it showed PASS it didnt restart even after a very longtime. so i disconnected.
Now i get the samsung logo with a triangle below. I m able to go to download mode.
Pls help guys
Click to expand...
Click to collapse
Did you check the AUTO REBOOT option in Odin? Did you try to remove the battery for a couple of minutes and reboot?
Yellow triangle is normal
PLEASE READ THE FAQ said:
Q4: When I turn my phone on, I see a yellow triangle. What is it and how can I get rid of it?
It will appear if you have flashed a non-official kernel from download mode. If you flash kernels using CWM recovery, Mobile Odin etc. you won't get this yellow triangle.
The easiest ways to remove it are to use the app Triangle Away OR use a USB Jig.
Click to expand...
Click to collapse
Aello said:
Did you check the AUTO REBOOT option in Odin? Did you try to remove the battery for a couple of minutes and reboot?
Yellow triangle is normal
Click to expand...
Click to collapse
yes auto reboot was checked. and i did remove the battery. What else can i do ?
ADDICT.ANK said:
Man calm down try d combi 1st
Keep power home n vol up pressed it'll switch on then off then wil boot in recovery keep it pressed til it boots in rcvry.
Try dis n post will b helpful for helping
Hit thanks if I helped u
A click for u but rep for me
Sent from my Rooted LT26i using xda premium
Click to expand...
Click to collapse
Hi there:
I had bought the device in June 2011
I had the same problem about 7 months back and did as you suggested, was able to recover the firmware.
Now, I am facing the same problem today, my device started and was stuck on the Samsung Galaxy S2 logo.
Did the same thing again, the animated android logo appeared, and after some time the device was off.
I have been trying to get the device to switch on , but to no avail, the device is not even powering ON.
Device info: Unrooted , OS: 4.1.2
Please advice. Kindly treat this as urgent.
Many thanks in advance.
Best regards,
Siddharth
sharma_sid said:
I have been trying to get the device to switch on , but to no avail, the device is not even coming to (switched off)
charging mode
Click to expand...
Click to collapse
Phone not booting at all/charging/no signs of life = Samsung service centre or local mobile repair shop for diagnosis. Nothing anyone here can suggest beyond that if the phone won't even bootloop or be in a state where it's 'user fixable'.
sharma_sid said:
Hi there:
I had bought the device in June 2011
I had the same problem about 7 months back and did as you suggested, was able to recover the firmware.
Now, I am facing the same problem today, my device started and was stuck on the Samsung Galaxy S2 logo.
Did the same thing again, the animated android logo appeared, and after some time the device was off.
I have been trying to get the device to switch on , but to no avail, the device is not even powering ON.
Device info: Unrooted , OS: 4.1.2
Please advice. Kindly treat this as urgent.
Many thanks in advance.
Best regards,
Siddharth
Click to expand...
Click to collapse
Sorry For the late reply.
I guess, you need to boot in recovery
with home + power+vol up
and clear data and reboot
if that doesnt help.
try booting in download mode again and flash the firmware.
but let it charge first.
and post here
ADDICT.ANK said:
Sorry For the late reply.
I guess, you need to boot in recovery
with home + power+vol up
and clear data and reboot
if that doesnt help.
try booting in download mode again and flash the firmware.
but let it charge first.
and post here
Click to expand...
Click to collapse
Tried everything , the phone is not even powering ON.
I checked with service center , they are asking INR 8000 to replace the motherboard.
I'm instead thing of buying S4, should I ?
please advice guys.
My phone is dead too...
I left it on (functioning normally) and went for a bath, when I got out it was dead...
From functioning ok to nothing in a few minutes, I don't have any idea why. Is it really the motherboard?
Fact: Electronics breaks. All the time. All electronics.
MJDdeLacerda - Take it to a local mobile repair shop for diagnosis, unless you're experienced with this type of electronics, nothing you can do.