Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive
suzuki2004 said:
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive
Click to expand...
Click to collapse
You'd better read BEFORE flashing something... now you have to read A LOT for the finding a solution.
Are you sure your battery is charged enough?? Cause you said 'since a month'
Maybe it's bricked for ever...
My battery is full.
suzuki2004 said:
My battery is full.
Click to expand...
Click to collapse
Ok, have you got KIES and ODIN on your PC? So your device can be recognized by odin. Then flash a stock rom from the forum ... Read How To flash with ODIN. (not the mobile version)
I have KIES and ODIN but when I connect my device to PC .. ODIN cannot recognize it.
suzuki2004 said:
I have KIES and ODIN but when I connect my device to PC .. ODIN cannot recognize it.
Click to expand...
Click to collapse
Make sure KIES is not running at the back and that the Samsung USB driver is installed. Maybe delete KIES, install again but not updating KIES. Restart PC, fire up odin and put your phone to usb ... wait if you see the ID:COM turns yellow. If so, you can flash again.
Can you be more specific..your phone can enter in download mode?
Did you try on other computer to check ondin/kies connectivity?
Odia (all credits goes to him) wrote on another semi bricked phone this:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
(PS. is on a pc with widowsn7)
hope that it will help you to recover ur device.
Best regards
Ur options r:-
if phone can enter download mode then use odin to flash correct rom
If it doesnt work then pull out the battery connect phone to charger ...hold buttons for entering download mode and while holding the buttons put the battery in
If this doesnt work buy a usb jig and then while u have the battery pulled out put in the jig and then put in the battery and see if it enters download mode
If none of these things work then my friend ur phone is completely hard bricked
Ur only options r to go to samsung guys n get it repaired there...if they give u crap about losing ur warranty coz u flashed a custom rom then its better to go for jtag repair as that will be cheaper than the amount samsung guys r gonna ask for repair
Sent from my GT-I9100 using Tapatalk
Thank you very much fatjivi. You solved my problem. My device is alive now
I followed your second "if" .. I pulled out the battery . held the buttons for entering the download mode and while holding the buttons I put the battery back
Thanx also to ITRC & hhhans1 who tried their best in resolving my issue.
I really appreciate it guys
glad to have it back alive...SGS2 is such a great device,...almost cannot be bricked....from this samsung did a great job..
suzuki2004 said:
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive
Click to expand...
Click to collapse
what a tragedy
Related
I have a problem with Galaxy s2. Basically it started to drain my battery like hell.
It gets empty in about 10 hours.
Now when I want to flash the phone once again in order to get everything back as it was when I bought it I cannot. This is due to MTP connection activating itself as soon as I turn on the phone. And I cannot enable usb debugging due to that as it says that I have to remove the USB cable.
In addition my phone charges itself really fast about 2 hours. And when I try to power it on without charger plugged in it gives me charging image and yellow triangle with ! in it and thermometer aside flickering. Does anyone have any ideas how to fix my phone?
Have you tried using CWM to wipe all data + clear all cache, then do a fresh re-install?
Yes I tried it now. It still says my USB is connected when its not. And now it doesnt unlock my sim card.
Factory reset that dont work return phone to a service centre ..
jje
Well thats the case I have voided warranty already. Wondering if there are any chances I could put old rom back before returning it?
Make a DIY USB JIG then flash it back to stock rom and have it checked.
EarlZ said:
Make a DIY USB JIG then flash it back to stock rom and have it checked.
Click to expand...
Click to collapse
Not sure what do you mean by DIY USB JIG but I cannot flash it because I cannot switch USB debugging on... Thats the case it shows me that USB is always connected when it isnt and when USB is connected it doesnt let to switch on USB debugging.
Route is source stock rom and Odin load stock rom into Odin enter download mode on phone and then connect cable and flash rom .
No download mode
http://forum.xda-developers.com/showthread.php?t=819551
jje
JJEgan said:
Route is source stock rom and Odin load stock rom into Odin enter download mode on phone and then connect cable and flash rom .
No download mode
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
Thank you all who have replied. I have now managed to get over the USB issue somehow but still something is wrong either with battery sensor or battery. When I power off my phone it switches on automatically and shows the thermometer and battery charge icon. Anyone else have had this problem? It also charges up to 95% and it bursts to 100% very quickly.
EDIT: Now I tried my friends battery and I did not get the flickering temp error and my friend didnt get it with my battery as well. So something now I'm totally out of ideas.
Service centre .
jje
I am having the same issues here, wonder if the topic creator resolved this in any way? I am thinking of getting a new battery?
Just FYI wear a condom or something on your galaxy S II. As it turns out from service my phone supposedly has liquid damage which does not the warranty apply. I have to pay 240 euros in order to get it fixed :S
Hey Guys.
I had an S1 7 months prior to buying the S2, and have upgraded/fresh installed ROMS many many times over the past year. Once the S1 bricked during an upgrade and I was able to get it into Download Mode without using a micro-USB jig from instructions on this website. If my memory serves me correctly, it was a procedure something fairly simple like hold the Home, Volume Up and Power buttons continuously until the phone goes into forced Download Mode.
However, this procedure doesn't work with the S2 or I'm remembering it incorrectly, and I'm unable to find that instruction webpage again. Now my S2 is almost bricked showing a message I've not seen before, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So far, I cannot get past this message and Kies 2.0.2.11071_128 doesn't recognize the device nor that emergency recovery is needed.
Unfortunately Samsung programmers haven't been quite smart enough or forward thinking enough to make Kies work from behind a proxy which requires authentication (I live and work on a university campus and the only way to the internet is via proxy and authentication) and it has never shown in the past 9 months of usage that it needs to update itself nor finds any official ROM releases. Therefore I've been forced to use Odin and ROMs from here or samfirmware.com for my updates. Until now, there has never been any major problems that I couldn't get around.
Do any of you have instructions on how I can get my S2 into download mode so as to get Odin to recognize the device? It is not possible for me to make my own JIG here in Thailand as there is nowhere for me to go purchase electronic equipment and parts such as soldering irons and resistors. I am a computer engineer and could easily build such if it were possible to get needed parts.
Thanks hugely in advance for any help offered.
Just order a high from ebay
Sent from my GT-I9100 using XDA Premium App
cmcole101 said:
Hey Guys.
I had an S1 7 months prior to buying the S2, and have upgraded/fresh installed ROMS many many times over the past year. Once the S1 bricked during an upgrade and I was able to get it into Download Mode without using a micro-USB jig from instructions on this website. If my memory serves me correctly, it was a procedure something fairly simple like hold the Home, Volume Up and Power buttons continuously until the phone goes into forced Download Mode.
However, this procedure doesn't work with the S2 or I'm remembering it incorrectly, and I'm unable to find that instruction webpage again. Now my S2 is almost bricked showing a message I've not seen before, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So far, I cannot get past this message and Kies 2.0.2.11071_128 doesn't recognize the device nor that emergency recovery is needed.
Unfortunately Samsung programmers haven't been quite smart enough or forward thinking enough to make Kies work from behind a proxy which requires authentication (I live and work on a university campus and the only way to the internet is via proxy and authentication) and it has never shown in the past 9 months of usage that it needs to update itself nor finds any official ROM releases. Therefore I've been forced to use Odin and ROMs from here or samfirmware.com for my updates. Until now, there has never been any major problems that I couldn't get around.
Do any of you have instructions on how I can get my S2 into download mode so as to get Odin to recognize the device? It is not possible for me to make my own JIG here in Thailand as there is nowhere for me to go purchase electronic equipment and parts such as soldering irons and resistors. I am a computer engineer and could easily build such if it were possible to get needed parts.
Thanks hugely in advance for any help offered.
Click to expand...
Click to collapse
Well kiss my rosy red butt-cheeks! Speaking from personal experience as tech support, I know empirically to replicate something 52 times prior to asking for assistance. This instance shouldn't have been an exception!
Directly after posting this request for assistance, I decided to try Odin once again and DANGED if this time it found my device even with the "Firmware encountered" error showing. Odin stopped around 90% and forced me to reset my S2, but this time it went right into Download mode with nary a fuss. Now Odin just successfully installed KG6.
So if there is anything to be learned from this experience, either by other users with similar issues or myself, it is "if at 1st you don't succeed, try again and again and again and again."
Hey guys. So, I bricked my phone. I installed RomManager, then ClockworkMode through it, thus I knew that this phone is not supported. It wasn't there in that list, so I chose Commtiva z71 or something like that. My phone doesn't get in download mode anymore. Could this be fixed at home? I really don't want to take it to a service centre.
Please help me. Thanks!
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
after rooting my phone samsung galaxy 5 doesnt turn on
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Jordanooo said:
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I5500 using Tapatalk
Threw it guys. It sucked anyway.
It doesn't suck, its amazing
Sent from my GT-I5500 using Tapatalk
dead ur smart
quebeco said:
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Click to expand...
Click to collapse
Exactly as u .i try to backup my rom and my samsung was dead in 5 seconds.I sent them to service twice The firt my motherboard is dead and i wait the second time because i thing is dead again I dont use rom manager never
did you tried to download ClockWorkmodRecovery(cwm) than flash with odin multi downloader and then wipe data?
first step i found in solving this issue
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
no need
rstar900 said:
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
no need to pull battery out and insert it back just insert the battery ,hold down the option key & insert usb cable thats it....but none of these gonna work you will need JTag to flash
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Bhargav97 said:
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Click to expand...
Click to collapse
That's not true, sadly. ROM Manager embeds a version of flash_image that will try to flash a boot image to bml8 if the device is not properly recognised. That's what happened for the OP, so a JIG will not resurrect the phone.
Oh...Sorry, I didn't knew that! So, final option left for OP is a JTAG flash.
@psyke83
Seems like out of your 3 bricks, this is one.
i was trying to flash ICS 4.0 firmware to my samsung s2 I9100G Malaysia just now... but failed..
then i try to unplugged it from my computer and pulling my battery out from my phone..
when i try to reboot my phone it shows up a black screen with a phone connecting to a computer with a yellow triangle warning sign between...
how can i quit this mode!! omg!!!
Hi there
Check your usb connections please, one of the most common and unmentioned problems with ODIN is that it doesnt like being connected through hubs or non usb2 ports, i failed with odin quite a few times, until i disconnected my phone from the usb hub and connected it directly to the pc usb2 port, everything was fine after that.
Odin doesnt usually fail, what files are you flashing, is the firmware a 1 file package or multiple files with a .pit file??
If its 1 file, make sure you untick repartition.
Odin is solid, i would ask you to go away and check all the above, use odin 1.83 which is the best version i found, then try again, also check your lead, sometimes cheap usb leads are designed for charging and not syncing.
Good luck
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
also the black screen mode is because the flash failed, you need to re enter download mode, and reflash until you get a pass, if it fails again, check md5 sums or download a generic s2 firmware and try again, its not bricked dont worry, as long as you do it right it will be fine.
thank for ur info.
anyway to get the hell out of the black scren??..
i connot re-enter the download mode... keep stuck in the black screen with a phone connecting to a computer with a yellow triangle warning sign!..
Can u get into clockworkmod recovery?
Press Home+volume up+ power key until you get to cwm recovery.
And yes you probably connected your phone through a hub or usb1 port.
If nothing else works you'll need a jig to restart into download mode. Try and look for the jig thread on general sgs2 forum for free locations.
That's forced download mode I.E. it's forcing you to flash something. Get a stock rom from Samfirmware or Checkfus & flash it with Odin.
Absolutley these guys are right, even if your flash has failed you should still be able to enter download mode, are you sure you cant, VOLUME DOWN, MIDDLE BUTTON AND POWER BUTTON, keep them all held down and it will boot to DL Mode, every time mine got a fail i still got to dl mode no problem.
Failing that yer, get a jig, usually they come from singapore, so if you cant wait that long pop to an electronics store, buy the resistors you need and a micro usb plug and make one, i made one yesterday and it cost me £1.40 to make, although its a makeshift for emergencies, it will do until the one ive ordered arrives.
Keep trying dl mode, no reason to not get into it.
MistahBungle said:
That's forced download mode I.E. it's forcing you to flash something. Get a stock rom from Samfirmware or Checkfus & flash it with Odin.
Click to expand...
Click to collapse
^This.
Also, OP, make sure you are flashing an I9100G firmware, and NOT an I9100 firmware. Likely that was the cause of your predicament in the first place, as that is the common cause of this screen being reached.
That sounds like a brick software, I get some like this time ago
Sent from SGSII//CM9 >>xBlackDroid<<
tried to flash the phone from ODIN and failed, most probably he done it wrong. The only thing the phone does is displaying an icon in the middle of the screen with a phone and a PC and an exclamation point in between them. I can`t get it to enter in download mode (volume down+home+power) and I can`t start it eather. It just stays at that icon. Kies is not recognizing the phone although the drivers are installed. When I pluged the phone for the first time in the PC it automatically instaled 2 drivers and that was it. Is it bricked? I haven`t seen this before.
The phone is an SGS 2 model GT-I9100G, ssn I9100GGSMH.
I hav downloaded 2 official firmware, 2.3.6 and 4.0 .. all is Malaysia..
flash so many times and keep failing..
dlan1 said:
The only thing the phone does is displaying an icon in the middle of the screen with a phone and a PC and an exclamation point in between them. I can`t get it to enter in download mode (volume down+home+power) and I can`t start it eather. It just stays at that icon.
Click to expand...
Click to collapse
Stop ignoring the people in this thread who actually know what they're talking about. Your phone is already in download mode.
please share firmware SAMSUNG GALAXY S II I9100GGsmh
dlan1 said:
i was trying to flash ICS 4.0 firmware to my samsung s2 I9100G Malaysia just now... but failed..
then i try to unplugged it from my computer and pulling my battery out from my phone..
when i try to reboot my phone it shows up a black screen with a phone connecting to a computer with a yellow triangle warning sign between...
how can i quit this mode!! omg!!!
Click to expand...
Click to collapse
get ur phone in download mode and flash stock firmware it shud be fi9
This is already forced download mode. Read earlier posts.
Did you see this thread: :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=1457458
Why are you people replying to a thread/poster from 6 weeks ago ?
The most recent poster (Ciasing) seems to be after an I9100G stock rom.
That's happened to me too please check this , thank god the link really helped me http://www.youtube.com/watch?v=KPSBXC72rmg
ciasing said:
please share firmware SAMSUNG GALAXY S II I9100GGsmh
Click to expand...
Click to collapse
u can find it here
http://forum.xda-developers.com/showthread.php?t=1754158
or
www.samfirmware.com
or download the firmware using checkfus
oinkylicious said:
Stop ignoring the people in this thread who actually know what they're talking about. Your phone is already in download mode.
Click to expand...
Click to collapse
I have the same problem and if it was actually in download mode properly then why won't ODIN detect the device????????????????????
I am trying to get clockworkmod onto the device. And the phone does nothing else but show that screen no matter how many times I do button combos etc... Maybe you should stop ignoring the guy when he's saying IT ISN'T WORKING AFTER HE HAS TRIED THE STEPS THAT PEOPLE WHO "KNOW WHAT THEY ARE DOING" HAVE PROVIDED.
machv5 said:
I have the same problem and if it was actually in download mode properly then why won't ODIN detect the device????????????????????
I am trying to get clockworkmod onto the device. And the phone does nothing else but show that screen no matter how many times I do button combos etc... Maybe you should stop ignoring the guy when he's saying IT ISN'T WORKING AFTER HE HAS TRIED THE STEPS THAT PEOPLE WHO "KNOW WHAT THEY ARE DOING" HAVE PROVIDED.
Click to expand...
Click to collapse
Depends on what you have already tried flashing since you originally got into this mess in the first place.
If you started blindly flashing stuff for any which device, it's possible you have borked your device to the point where your PC will no longer detect it.
Say, if you tried flashing a Fascinate ROM or similar to a Vibrant.
I'm just guessing that's what happened, because you started this thread in the Fascinate forum.
The Fascinate and the Vibrant are two completely different models of phones. The Fascinate is the Verizon variant of the Galaxy S, and is a CDMA phone. You have a Telus version of the Vibrant, which is a GSM phone.
So if you flashed something out of the Fascinate forum to your SGH-T959D Vibrant, you likely caused this issue yourself. And why are you in the I9100 forum trying to solve your problem?
Go to the Vibrant forum for your problem with your Vibrant phone.
Use Odin
dlan1 said:
thank for ur info.
anyway to get the hell out of the black scren??..
i connot re-enter the download mode... keep stuck in the black screen with a phone connecting to a computer with a yellow triangle warning sign!..
Click to expand...
Click to collapse
dont worry.. i also encountered with the same problem.. connect ur phone as it is to the pc and open odin of latest version. and flash its stock rom using PDA.. the phone will come back to normal.:good:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Edit: Samsung service has replaced the mother board!!
Doing the pit partition has resulted in my phone getting bricked!!
So people new to the forum, never do it :laugh:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
CashAndPotatoes said:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
Click to expand...
Click to collapse
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Pradeep said:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Click to expand...
Click to collapse
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Gediprime said:
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Click to expand...
Click to collapse
If you can access download mode, use it. Try re-flashing your kernel.
nikufellow said:
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Click to expand...
Click to collapse
JIG ???
Gediprime said:
JIG ???
Click to expand...
Click to collapse
Use the search button and use keywords "usb jig". Or google.
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Click to expand...
Click to collapse
I am sorry!! I am new to this forum and the phone being a recent purchase, i was very much desperate!!
I know the answer may not be different and the problem may not be new hence I've asked to guide me to the appropriate thread in my post!! No offence!!
Thanks for your reply. I will be taking the phone to Samsung Service tomorrow.
Gediprime said:
JIG ???
Click to expand...
Click to collapse
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
If you can access download mode, use it. Try re-flashing your kernel.
Click to expand...
Click to collapse
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Gediprime said:
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
Click to expand...
Click to collapse
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Pradeep said:
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Click to expand...
Click to collapse
You are misinterpreting what you read. What you're referring to is resetting the binary counter, and no it doesn't work on ICS bootloader however it still works for putting device into download mode (unless its bricked).
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
"Soft-brick" has absolutely no meaning, Your device is either "bricked" or it isnt. Its a made up term by n00bs when they cant get system to boot normally. Your devcie is only bricked when it wont power on or go into useable recovery+download modes. If you can simply use a jig or go directly into flashing a rom then your device is not bricked.
The "bricked" term is used far too loosely nowadays.
Pradeep said:
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Click to expand...
Click to collapse
Your phone died? you kiding ?
I'm using the leak version of Sammobile since 3 weeks... Why do you think the phone make a bad reaction now? why now?
Ok, you try to flash OFW and don't result. and then you flash again the XXLSJ ? and the phone colaspe?
What kind of roms do i flash? OFM or CFW ? ICS or JB ?
Well if a can connect with ODIN of course
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Pradeep said:
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Click to expand...
Click to collapse
Yes its possible which is the reason we already mentioned to try it
It all depends on the actual base issue though as to whether it will work. Its worth a try either way though, They only cost £1-2 or you can make them yourself if you have the spare parts. (Don't ask how, Use search).
I have tried the JIG, but no luck!!
I have given the phone to Samsung Service.
Hope they fix it!!
Will they use JTAG or it has to be done somewhere else in case Samsung people refuse to do it??
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
nikufellow said:
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
Click to expand...
Click to collapse
Thanks!! Well I did act dumb there!! Said I downloaded a game Royal Revolt (~200 MB), the phone got heated, blah blah blah......
Well I did not tell about firmware upgrade via kies and all....
Only thing that I can do now is wait and hope!!:laugh:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed