Did you get the message: Magic Value Mismatch:-.-.-.-.-.-?!
After flashing a new recovery it happens sometimes.
GREEN ZONE
Are you able to go to the recocery menu(power + vol up)? If not, go to BLUE ZONE. If yes, follow these steps
1. check whether you have copied your rom as "update.zip" to your SD card's root directory
2. Go to recovery menu and install update.zip
BLUE ZONE
You may did something wrong while flashing a new recovery. Here is the right method:
1. go back to fastboot mode(power+power+power+vol up) and type these commands on your PC
2. fastboot erase userdata
3. fastboot erase system
4. fastboot erase cache
5. fastboot erase linux
6. fastboot erase recovery
7. fastboot flash recovery recovery.img (change path, if recovery.img is not in the same directory as fastboot.exe)
8. fastboot reboot
Are you able now to go to the recovery menu? If yes, go to GREEN ZONE and follow steps. If not, go to ORANGE ZONE.
ORANGE ZONE
Are able to unpack the update.zip and find the system.img and boot.img files? If not, then go to RED ZONE. If yes, copy these 2 files to the directory where the fastboot.exe is, run these commands:
1. fastboot erase recovery
2. fastboot flash recovery recovery.img
3. fastboot -w
4. fastboot erase linux
5. fastboot erase system
6. fastboot flash system system.img
7. fastboot flash linux boot.img
8. fastboot reboot
ROM is installed. Enjoy it!
RED ZONE
Make sure, that you copied the same recovery.img to fastboot folder, that you had flashed before to your tablet.
Type this command in recovery mode:
1. fastboot boot recovery.img
This command will run the recovery from your PC. After the recovery menu is booted, go to GREEN ZONE and enjoy your ROM!
If this was helpful to you, please do not hesitate to click on Thanks!
Lol, nice to see my post copy/pasted without any links indicated. Anyway, I hope It's helpful for ppl.
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
yellowumbrella said:
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
Click to expand...
Click to collapse
So you installed the recovery via fastboot. Did you manage to boot into recovery mode?
I had that issue, that I couldn't boot into recovery mod from my Folio, by pressing power+Up button. Thats why I added the RED ZONE method. Its like booting recovery from your PC. (fastboot boot recovery.img). All the times I wanna upgrade my current ROM, I have to do this step, because the power+up does not work, and the Folio skips booting in recovery and wanna do normal booting. However there is no Rom installed on machine, so I get the magic value mismatch message.
So try to boot recovery from your PC, but be sure you have copied to your fastboot folder the same recovery, that you flashed onto the tablet.
I hope it was helpful. If something is not clear, feel free to ask.
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
yellowumbrella said:
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
Click to expand...
Click to collapse
Are you able to wipe cache from recovery? And what else errors are listed?
One more thing, try to flash your boot.img and system.img via fastboot as written above.
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
yellowumbrella said:
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
Click to expand...
Click to collapse
Well just to see it clear. So you are able to install Foliomod 1.4, so your Internal storage is not broken.
When I get home, I will check the system folder of ICS rom. There are some method to create system.img from an unpacked folder...
So, in CWM 5.5.0.4 you manage to install Zip from SD card, ROM and GAPPS as well, but the Rom does not boot?!
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
yellowumbrella said:
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
Click to expand...
Click to collapse
Try to install gapps as well. Maybe it helps...
nope, no luck even with gapps installed..
just a blank screen..
sigh
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Have you tried all the roms? ICS Alpha 1,2,3 and 4?
Tried 3 and 4, didn't bother trying earlier ones, as it seems the latest ones work for most users
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Hmmm strange. I ask it for you on developers forum. What you can still do, is to check the steps, that you did them correctly. In most of the cases users forget something, or do some steps incorrectly.
Try to erase userdata, cache, system, linux and recovery in fastboot. You mentioned you had problem with fastboot under Win7. Problem may occur, in case of not proper erasing.
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
yellowumbrella said:
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
Click to expand...
Click to collapse
For me it works perfectly on Win7. After Installing SDK and JDK the in the devicemanager it is shown as an Unknown device. Simply add the driver manually to it.
Download driver from attachment.
Copy it to SDK\USB_driver folder
That works for me. After its done, the Folio is shown as "Fastboot" in device manager. But connect the tablet in fastboot mode to your PC before you add driver manually to it.
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
yellowumbrella said:
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
Click to expand...
Click to collapse
When You have win7, You have run the console as admin!
Or copy the complete Fastboot folder to another Destination like c:\temp...
Thanks stefannsv, tried it, still not showing...
But I can access fastboot on another platform, so I assume it's not an issue, I can just switch over to another OS to flash
no go, followed both this original post (tried all steps except orange, cause the rom I'm trying to install has a system folder, not a system.img)
Last method I tried was:
1) boot into fastboot
2) boot cwm-recovery-5.5.0.4.img directly from PC
3) wipe data/factory reset
4) wipe cache partition
5) install zip from SD card and chose the alpha 4 release
installing update...
then back to recovery, reboot and voilà... magic value mismatch again (it had disappeared for a while... )
Also, when booting into CWM 3.0.0.5, I get a series of "E: Can't mount/cache/recovery" type errors.. could this be related?
booting directly into recovery from PC doesn't alllow me to install any ROMS, not even foliomod 1.4 which works if using puppet13th's method
Related
Problem: Was trying to install AOKP 4.0 onto my fully updated TF201.
Wiped data/cache/davlik
installed ROM
installed Google Apps
Device stuck on splash screen.
Figured out the problem was an older version on CWM. I believe it was 5.5.0.4.
Tried to go install latest version of CWM: 5.8.3.4 by using the Fastboot method.
Accidentally selected Wipe Data Option instead of USB.
Lost CWM, all data on internal memory and my entire OS.
Device cannot boot (stays on splash screen). I also try to get back into CWM and it fails. I get bounced back to the Fastboot screen.
What can I do to get this thing back up and running? I will even take stock at this moment just to get the ball rolling again.
Thanks!
kevinb77 said:
Problem: Was trying to install AOKP 4.0 onto my fully updated TF201.
Wiped data/cache/davlik
installed ROM
installed Google Apps
Device stuck on splash screen.
Figured out the problem was an older version on CWM. I believe it was 5.5.0.4.
Tried to go install latest version of CWM: 5.8.3.4 by using the Fastboot method.
Accidentally selected Wipe Data Option instead of USB.
Lost CWM, all data on internal memory and my entire OS.
Device cannot boot (stays on splash screen). I also try to get back into CWM and it fails. I get bounced back to the Fastboot screen.
What can I do to get this thing back up and running? I will even take stock at this moment just to get the ball rolling again.
Thanks!
Click to expand...
Click to collapse
Go here, http://forum.xda-developers.com/showthread.php?t=1615990 read the OP, then go here to download http://teamw.in/project/twrp2/93
Follow the instructions under
Download - Recovery Image / Fastboot Method:
You will back up and running in no time, unfortunately you will need to reinstall the rom....
PS you will need to adb push the rom after you reboot to recovery....
Gage_Hero said:
Go here, http://forum.xda-developers.com/showthread.php?t=1615990 read the OP, then go here to download http://teamw.in/project/twrp2/93
Follow the instructions under
Download - Recovery Image / Fastboot Method:
You will back up and running in no time, unfortunately you will need to reinstall the rom....
PS you will need to adb push the rom after you reboot to recovery....
Click to expand...
Click to collapse
Thanks for the quick response!
OK, I was able to get the stock TF201 drivers onto my Windows 7 PC (since an alternate method had me change them) I am following every step explained in the directions from TeamW.in and am getting this error: "The program can't start because AdbWinAPI.dll is missing from your computer. Try reinstalling the program to fix this problem"
(UPDATE) I was able to find a ADBWinAPI.dll file and I dropped it into the same folder as the twrp.blob and fastboot.exe files. I am not able to access the cmd line, but it does not start the flash, it only lists a bunch of optional cmds to pick from. None of which look useful.
kevinb77 said:
Thanks for the quick response!
OK, I was able to get the stock TF201 drivers onto my Windows 7 PC (since an alternate method had me change them) I am following every step explained in the directions from TeamW.in and am getting this error: "The program can't start because AdbWinAPI.dll is missing from your computer. Try reinstalling the program to fix this problem"
(UPDATE) I was able to find a ADBWinAPI.dll file and I dropped it into the same folder as the twrp.blob and fastboot.exe files. I am not able to access the cmd line, but it does not start the flash, it only lists a bunch of optional cmds to pick from. None of which look useful.
Click to expand...
Click to collapse
Did you ever have any luck with this? I had a JB ROM soft brick my 201 about a year ago. I lost TWRP recovery, OS, pretty much everything. It stays on the splash screen and allows me to get to the fastboot option. I can't get my computer(windows 8) to recognize it at all. Just states it can not recognize USB device. I installed the universal naked driver package along with trying the stock ASUS driver package with no luck.
I put the tablet down and purchased a 701 but now would like to fix the 201 and sell it. If you have any advice I would be very thankful
Alright, so i have an EVO 4g lte and i attempted to root it today. It didnt turn out very well to say the least... I unlocked bootloader and flashed TWRP recovery.I then flashed superSU, and at the same time i flashed a custom rom and gapps zip. Then hit reboot. It has not booted up since.. It will just sit at the white HTC screen. i tried clearing cache and Dalvik cache, also did a factory reset. tried flashing cm10 rom onto the device as well as a rooted stock rom. nothing works! the farthest i have gotten was with the cm10 rom and it went to the cyanogenmod boot logo but was in bootloop still. I downloaded the ADT tool bundle but the phone wont show up on the device list. Can anyone help? im completely stumped.. Im fairly new to rooting and custom roms, but i have rooted multiple tablets and samsung galaxy phones and havent had any issues. this is my only phone also, i just gave my backup to my mother because her phone broke... please if anyone knows how to fix this let me know. when i boot into recovery mode it says Tampered and Unlocked at the top as well as S-On. I can also go into TWRP recovery with no problems. just cant use fastboot with my computer (windows 7 PC).
I am pretty sure i know what i did wrong, I flashed SuperSU to gain root at the same time i flashed the custom rom and gapps.. on all the other devices i would reboot after root and then flash the custom rom seperately.. but is there a way to correct my mistake?
Since you are s-on you have to fastboot flash the boot.img/kernel first and then flash CM and gapps
Any questions PM me
OK sorry to be a noob but how do I do that? I used cmd.exe while rooting but now it won't recognize my device. Much thanks for any help!!
Sent from my GT-P5110 using xda app
If in bootloader type fastboot devices
In recovery type adb devices
See if you get a reply
In fast boot USB menu on the phone, I typed fastboot devices on cmd and it came up blank.
Sent from my GT-P5110 using xda app
Sounds like a driver issue
1.Uninstall everything HTC from your PC
2.Reboot your PC
3.Plug your phone in and it will load a bunch of drivers
4.Try the command again
If that does not work get the latest drivers from HERE use the ones dated 6/6/13
and don't forget the BMP drivers towards the bottom of post 1
bigdaddy619 said:
Sounds like a driver issue
1.Uninstall everything HTC from your PC
2.Reboot your PC
3.Plug your phone in and it will load a bunch of drivers
4.Try the command again
If that does not work get the latest drivers from HERE use the ones dated 6/6/13
and don't forget the BMP drivers towards the bottom of post 1
Click to expand...
Click to collapse
ok ill uninstall all that and give it a try. is pm a better contact method for you?
AUSRA15 said:
ok ill uninstall all that and give it a try. is pm a better contact method for you?
Click to expand...
Click to collapse
Here is fine
bigdaddy619 said:
Here is fine
Click to expand...
Click to collapse
OK rebooting now I'll see if it uninstalled everything.
:fingerscrossed:
OK were connected now, now what? :good:
PC and phone are talking ?
fastboot devices
yes they are talking now. fastboot devices and my phone shows up.
i tried fastboot flash boot.img but it wont recognize the command, i placed the boot.img file into the platform-tools folder inside my C drive. what am i doing wrong? its late at night and im frustrated so i know im screwing something up...
ok good BTW which version of twrp are you using? Let me know before you continue.
pull the boot.img from the rom zip and copy it to the folder you opened your cmd window from
then type fastboot boot boot.img
once it says successful press the power button to return to HBOOT and use the vol keys to navigate to recovery
Once there choose wipe and wipe cache/dalvik cahce/system/data or factory reset depending which version of twrp you are using
then flash CM and gapps
C:\Users\Corey>fastboot boot boot.img
cannot load 'boot.img': No error
thats what i typed in and thats what it said back to me. not quite sure what the problem is.
the boot.img is placed in the same folder as the fastboot application
AUSRA15 said:
C:\Users\Corey>fastboot boot boot.img
cannot load 'boot.img': No error
thats what i typed in and thats what it said back to me. not quite sure what the problem is.
the boot.img is placed in the same folder as the fastboot application
Click to expand...
Click to collapse
try fastboot flash boot boot.img
My bad I was looking at a buddies thread for the commands
bigdaddy619 said:
try fastboot flash boot boot.img
My bad I was looking at a buddies thread for the commands
Click to expand...
Click to collapse
same thing, cannot load unknown error. also i am using twrp 2.6.0.0
Ok lets try something different at least it will get you up and running
Get twrp v2.4.1.0 from http://techerrata.com/browse/twrp2/jewel
put it in the same folder you are using and we will downgrade your twrp for now
copy and paste this in the cmd window
fastboot flash recovery openrecovery-twrp-2.4.1.0-jewel.img
then fastboot erase cache
ok got the twrp done succesfully as well as the wipe cache. whats next? i think i figured out what i was doing wrong, i hadnt opened the file directory. cd downloads, cd android files, etc.
should i try going into recovery now on the phone and flash a rom, or should we stay on fastboot and push the boot.img?
Easiest way to open a cmd window is to press shift and right click inside the folder and choose open cdm window here
That way you know you are in the correct folder.
Yeah go ahead and try to flash the boot.img again
Ok... This is my 4th android phone.. And I love this phone... And only had it for a week.... and just now got it bricked.... here's what happen... Today I tried to flash a sense 4.1 rom, but im so new at this, and I'm half way done, and I went in a rush because I was nervous, and I accidentally press "install and keep data" and that was my mistake. I factory reset it b4 so I tried to flash it... So I thought it wouldn't be a problem. So I waited till the phone finish flashing. And when I rebooted the phone.... Nothing happened, just stuck on the white screen.... vibrating and etc... And I tried to restore all my data in clockworkmod recovery like I never even tried flashed it.. and it kept saying "won't mount sd card" and I tried to clear my cache/dalvik-cache, and like it still wont fix the issue. I even tried to restore wat I backup b4 I tried to flash it... and It was gone!!! Even my windows 8 laptop won't even detect my resound nor my sd card(unless its on a different android). But How can I fix my Rezound?!? plzzzz How can I fix this soft bricked issue? pllzzzzzzz help!!!
Im assuming you already have adb installed
Download this file
http://www.mediafire.com/download/oa2sjlvrecx0wdn/recovery-ra-vigor-3.16-gnm.img.zip
Extract the recovery img
Put it in the adb folder
Load into fastboot
Open up the terminal
Put "cd" then hit space
Drag and drop the adb folder into the terminal window then hit enter
Now use this command to flash that recovery "fastboot flash recovery recovery.img" (without the quotation marks)
Now go into recovery Find "format data system cache ect."
Go to format all to ext3 once that is done hit return
Flash your prefered rom from the flash menu and all that
Once you are done return to the main menu and go to "developer menu"
Then reboot to bootloader
Now go into your rom that you downloaded on your pc and find the rom now open it and get the boot.img
Copy the boot.img file to your adb folder
Open up terminal again and this time use the command "fastboot flash boot boot.img" in terminal its going to say sending then writing usually takes a couple of seconds
now just go to the reboot option and your rom should work
Now remember that since you are s on you need to get the boot.img file from EVERY rom you install and flash it thru the terminal in order to get your rom working
xkjonathanxk said:
Im assuming you already have adb installed
Download this file
http://www.mediafire.com/download/oa2sjlvrecx0wdn/recovery-ra-vigor-3.16-gnm.img.zip
Extract the recovery img
Put it in the adb folder
Load into fastboot
Open up the terminal
Put "cd" then hit space
Drag and drop the adb folder into the terminal window then hit enter
Now use this command to flash that recovery "fastboot flash recovery recovery.img" (without the quotation marks)
Now go into recovery Find "format data system cache ect."
Go to format all to ext3 once that is done hit return
Flash your prefered rom from the flash menu and all that
Once you are done return to the main menu and go to "developer menu"
Then reboot to bootloader
Now go into your rom that you downloaded on your pc and find the rom now open it and get the boot.img
Copy the boot.img file to your adb folder
Open up terminal again and this time use the command "fastboot flash boot boot.img" in terminal its going to say sending then writing usually takes a couple of seconds
now just go to the reboot option and your rom should work
Now remember that since you are s on you need to get the boot.img file from EVERY rom you install and flash it thru the terminal in order to get your rom working
Click to expand...
Click to collapse
If you are S-ON, you are likely not bricked, it's almost impossible to completely brick when you are S-ON.
Why do people keep telling occasional flashers that are S-ON to do this?!?!? It is the hard way, also don't use Amon Ra, is it outdated and known to cause issues with current ROMs, use TWRP or CWM recovery!!! Also, verify your ROM is specifically for the HTC Rezound, check the Developer threads here and make sure it is stable and widely used unless you really know what you are doing.
Although xkjonathanxk is on the right track, he is making more complicated than it needs to be...
- Download the first link in the first post of this thread and place it on the root of your SD card: [Tool] - 3/24 - CleanWIPE 1.0 - Wipe 5 or 10x before ROM install! - 1heffer Edition! (CleanWIPE formats all the necessary partitions for you, and prepares the phone for a new ROM)
- Download TWRP or CWM Rececovery (one of the first two links in post 1) and extract the recovery*.img and place it in the adb folder that contains fastboot.
- Download a tested and verified ROM of choice and place it on the root of your SD card
- Now, reboot into fastboot, remove battery and hold down Power and Vol Dn, once the menu comes up select Fastboot and press power, connect phone to PC
- In ADB enter the command "fastboot devices", if it shows a device continue, if not report back please
- Now enter the command "fastboot boot recovery.img" and TWRP (or CWM) should open on the device in a few seconds (replace recovery.img with whatever the name of the xxxx.img file is from TWRP or CWM archive)
- Install the CleanWIPE zip from above
- Install ROM zip image
- Reboot and enjoy the goodness
Remember to give the ROM some time to settle down on the first boot, and that the first boot can take a long time, like a painfully wrong "WTF did I do to ruin my device!" long time, but give it a solid 10 minutes before doing anything else.
@acejavelin
acejavelin said:
If you are S-ON, you are likely not bricked, it's almost impossible to completely brick when you are S-ON.
Why do people keep telling occasional flashers that are S-ON to do this?!?!? It is the hard way, also don't use Amon Ra, is it outdated and known to cause issues with current ROMs, use TWRP or CWM recovery!!! Also, verify your ROM is specifically for the HTC Rezound, check the Developer threads here and make sure it is stable and widely used unless you really know what you are doing.
Although xkjonathanxk is on the right track, he is making more complicated than it needs to be...
- Download the first link in the first post of this thread and place it on the root of your SD card: [Tool] - 3/24 - CleanWIPE 1.0 - Wipe 5 or 10x before ROM install! - 1heffer Edition! (CleanWIPE formats all the necessary partitions for you, and prepares the phone for a new ROM)
- Download TWRP or CWM Rececovery (one of the first two links in post 1) and extract the recovery*.img and place it in the adb folder that contains fastboot.
- Download a tested and verified ROM of choice and place it on the root of your SD card
- Now, reboot into fastboot, remove battery and hold down Power and Vol Dn, once the menu comes up select Fastboot and press power, connect phone to PC
- In ADB enter the command "fastboot devices", if it shows a device continue, if not report back please
- Now enter the command "fastboot boot recovery.img" and TWRP (or CWM) should open on the device in a few seconds (replace recovery.img with whatever the name of the xxxx.img file is from TWRP or CWM archive)
- Install the CleanWIPE zip from above
- Install ROM zip image
- Reboot and enjoy the goodness
Remember to give the ROM some time to settle down on the first boot, and that the first boot can take a long time, like a painfully wrong "WTF did I do to ruin my device!" long time, but give it a solid 10 minutes before doing anything else.
Click to expand...
Click to collapse
I really appreciate your help and everything. So i thank you. But Like i said im running windows 8, it wont detect my rezound or my sd card, the only time the pc is able to detect the sd card is when im able to mount my sd card to CWM. But it really wont detect it.... help me again
Multidex24 said:
I really appreciate your help and everything. So i thank you. But Like i said im running windows 8, it wont detect my rezound or my sd card, the only time the pc is able to detect the sd card is when im able to mount my sd card to CWM. But it really wont detect it.... help me again
Click to expand...
Click to collapse
Ubuntu Live CD... Windows not required.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Dont know how to work ubuntu.. help again
acejavelin said:
Ubuntu Live CD... Windows not required.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
lol its the good thing i know how to make a dual os between win8 and ubuntu, but heres another problem, i dont even know how to work ubuntu...
i think my pc can detect the rezound. But idek how to work ubuntu, plzzzz help!!
Multidex24 said:
lol its the good thing i know how to make a dual os between win8 and ubuntu, but heres another problem, i dont even know how to work ubuntu...
i think my pc can detect the rezound. But idek how to work ubuntu, plzzzz help!!
Click to expand...
Click to collapse
For the things you need to do, its not much different than Windows. Download and install adb, copy images to same places, and the commands are pretty much the same. If you can dualboot you obviously have some knowledge of such things.
If this is all do difficult, just grab a thumb drive, put mini-adb, recovery.img, and your ROM on it and go to a buddies computer with Win7 for 20 minutes and get it done that way.
I know this seems like a huge, potentially fatal problem, but it is minor...
Another thought I had... Download TWRP, go into CWM recovery and copy the TWRP file and ROM to the sd card, and FLASH TWRP recovery ZIP with CWM recovery, reboot into recovery and you will then be on TWRP and you can use TWRP's HTC Dumlock to flash the ROM and the boot.img without a PC at all... In theory, it should work.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
also to note....you dont have to install linux to get s-off....if you follow my guide you can do it straight from a live disk rather than installing it....so it wont erase or mess up your windows partition at all
Solved!
Thank you, Mjones, I finally got it! I knew it was much easier than I was making it out to be. I was missing the kernel! Yeah, a crucial part in the process, I know
I first ran CWM and flashed the ROM over and ran the .zip through recovery (which I couldn't understand at first as I could never find it in the directory) but the installer would only go 50% and would fail... makes sense why now lol
I later flashed TWRP and backed up again after recovering from the fail. I flashed over the kernel and voila! So simple... Had to slap myself.
Thanks again! Case solved.
REV3NT3CH, that is sweet!! I have been hoping there is a way to gain s-off with Windows. I have 7 at work and 8.1 (which I can't get anything to work on) at home. I actually have to focus on work today haha so I'll look into the method and try it out tomorrow if I can. Thanks for all of the help.
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Sorry, don't know anything about that phone.
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Did you try this first? (Right from Moto's site)
Perform a factory reset using external keys
1. Power off the phone, press and hold volume down button, press power button
2. Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", then press Vol up key
3. Wait for the "triangle ! / Android" screen then go on to step 4
4. Press both Vol up and Vol down key simultaneously. A menu will come up
5. Tap on Vol down key until "wipe data/factory reset" is highlighted, and tap Power key. Another Confirmation screen will come. Tap on Vol down key until coming to Yes and tap Power key
6. After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power key
7. Phone will reboot to initial setup screen.
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
not working
hariom.gupta11 said:
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
Click to expand...
Click to collapse
not working on my 4c. write successful but when reboot is completed it goes to previous state.
"the user data partition can no longer be used"
zb602kl_x00tdb
L0RDZ3RO said:
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
Click to expand...
Click to collapse
I have same problem on asus zenfone max pro m1 I bought it online said used and now working
can't boot into recovery.
can't boot into system.
Only EDL Mode and Fastboot Mode, but fastboot is Locked whic I cant unlock because I cannot boot into system to toggle USB Debugging and allow OEM unlocking
Qualcomm is harder to flash than MTK that can use SP FlashTool.
on this I use QFIL but keeps "sahara error". I tried searching and try moving firmware file to bin but no Luck. I'm currently trying different version of QFIL Tool.
If it FAILS my only HOPE is to use MUT-QCfire which will Require a "SmartCardReader" Which is a bit pricey and I don't even know if it will work on my device.
Hi all. Before i start i want to say, i read a lot of threaths and comments before i started to booting recovery and i followed Tutorial that you can find somewhere here on XDA for MotoE.
I unlocked Bootloader correctly and everything was right. Then i downloaded latest version of TWRP and CWM if something will be wrong.
So i booted into bootloader, connected to PC (windows 8.1) and using adb i installed TWRP (by command window). After instalation was complete, i used comand: "fastboot reboot" to get my mobile start normally. Everything worked fine so i started last step. Turned off mobile, booted into bootloader(or maybe fastboot? idk...) and by volumebuttons i choosed "Recovery" . Then a black screen for a minute. After that mobile stuck on screen that i attached down below. So i tried this but with CWM (same process way). But nothing new... Someone said me i had to try "Minimal ADB and Fastboot" but again, nothing happend.
Can you help me guys?
The recovery isn't installed! Reinstall the recovery and follow correct steps!
I tried it one more time. I´m attaching image that is from command window showing that .img was booted ... Strange is, immediately after booting was completed, mobile restarted... and after i turned off mobile again, still i can´t reach recovery. Isn´t that problem in .img file? maybe it´s broken, isn´t it?
Tried once again
Ok last try didnt worked. So i complettly followed this guide http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891 STEP-BY STEP!
Command window screen attached, Fastboot screen attached.
After reboot, turn off i tried to open recovery and again that image that i posted in first coment. (android figure with words: no command)
By that guide i downloaded recovery from here: https://goo.im/devs/OpenRecovery/condor/
and i downloaded just "openrecovery-twrp-2.7.1.0-condor.img" as i have to do it (written in guide)
Well, your recovery is flashing fine from cmd but its not detected by your phone.
Try re-downloading the recovery and check md5 before flashing.
I'll look into it and see if the issue can be pinpointed.
Btw, you might need the flash the stock ROM back if nothing works.
Tapatalk with RAZR HD
neo.ank said:
Well, your recovery is flashing fine from cmd but its not detected by your phone.
Try re-downloading the recovery and check md5 before flashing.
I'll look into it and see if the issue can be pinpointed.
Btw, you might need the flash the stock ROM back if nothing works.
Tapatalk with RAZR HD
Click to expand...
Click to collapse
Ok i will re-download recovery, is that file that i downloaded ok? i mean should i dowload same file as before?
+ sorry for that but i completly dont know what the "md5" is. can you send me link from where i can learn what it is? you can explain that too but i dont want take your free time.
Mondop said:
Ok i will re-download recovery, is that file that i downloaded ok? i mean should i dowload same file as before?
+ sorry for that but i completly dont know what the "md5" is. can you send me link from where i can learn what it is? you can explain that too but i dont want take your free time.
Click to expand...
Click to collapse
Okay try this.
Flash CWM
If flashing fails or you get any error, then try booting into recovery.
Code:
fastboot boot recovery.img
If you boot into recovery, flash the SuperSU package.
Reboot and then flash the recovery.
See if it works.
neo.ank said:
Okay try this.
Flash CWM
If flashing fails or you get any error, then try booting into recovery.
Code:
fastboot boot recovery.img
If you boot into recovery, flash the SuperSU package.
Reboot and then flash the recovery.
See if it works.
Click to expand...
Click to collapse
no
flashed CWM from here http://forum.xda-developers.com/showthread.php?t=2793625
concretly from here http://www.mediafire.com/download/6odyyqgodw15f1b/recovery.img
then i flashed it, then i rebooted phone then i shuted it off (to boot into fastboot) in fastboot i selected recovery and again, that screen with android figure (no command) so i pressed power button for long. mobile rebooted. again i went into fastboot to write command you said me to boot into recovery. but i stucked at starting screen (that blue big M in "water" cycle)
this all means, files i downloaded was OK but my phone isnt :/
any idea :/
Mondop said:
no
flashed CWM from here http://forum.xda-developers.com/showthread.php?t=2793625
concretly from here http://www.mediafire.com/download/6odyyqgodw15f1b/recovery.img
then i flashed it, then i rebooted phone then i shuted it off (to boot into fastboot) in fastboot i selected recovery and again, that screen with android figure (no command) so i pressed power button for long. mobile rebooted. again i went into fastboot to write command you said me to boot into recovery. but i stucked at starting screen (that blue big M in "water" cycle)
this all means, files i downloaded was OK but my phone isnt :/
any idea :/
Click to expand...
Click to collapse
Do not flash CWM, just boot into it by the command I posted above.
Then try and flash SuperSU, (if you get a root prompt from CWM, select NO.)
Reboot device.
Then again boot into fastboot and now flash recovery (twrp).
neo.ank said:
Do not flash CWM, just boot into it by the command I posted above.
Then try and flash SuperSU, (if you get a root prompt from CWM, select NO.)
Reboot device.
Then again boot into fastboot and now flash recovery (twrp).
Click to expand...
Click to collapse
so now what if i flashed that CWM before?
Now i tried go to fastboot and used just command that you said(to boot into recovery) and as i said, i stucked on motorola starting logo
+ you said i have to flash cwm
Mondop said:
so now what if i flashed that CWM before?
Now i tried go to fastboot and used just command that you said(to boot into recovery) and as i said, i stucked on motorola starting logo
+ you said i have to flash cwm
Click to expand...
Click to collapse
I said if flash is not successful, then boot into it. So you can't boot into recovery either.
Here's last resort, extract the stock recovery from stock ROM and flash it. Then we'll try flashing TWRP again.
If you don't have stock ROM, download it. as you might need it to recover.
neo.ank said:
I said if flash is not successful, then boot into it. So you can't boot into recovery either.
Here's last resort, extract the stock recovery from stock ROM and flash it. Then we'll try flashing TWRP again.
If you don't have stock ROM, download it. as you might need it to recover.
Click to expand...
Click to collapse
Okay, can you give me link with tutorial? i found just this one which restores whole system (and its 4.4.3 and i have now 4.4.4, i mean this will be maybe problem, wouldn´t it?)
i mean this one (tutorial how to restore moto E)
http://forum.xda-developers.com/showthread.php?t=2759495
did you try updating / reinstalling USB-driver on your computer?
magicw said:
did you try updating / reinstalling USB-driver on your computer?
Click to expand...
Click to collapse
no i didnt, think you it will help? i mean if i can connect my mobile into pc without any problem in normal mode and in fastboot too... i will unninstal drivers, intall them again and them i will try unninstal motorola device manager and then again intall him.
(i had newest drivers i can update them)
LOL?
OK im in recovery i already flashed superSU...
What did i do?
As you said, i reinstalled all drivers...
then i downloaded same TWRP again (but with mirror source)
I downloaded attached md5 file ( still dont know what should i do with it )
moved recovery and .md5 files into minimal adb and fastboot (both files i renamed to "recovery")
turned off devices
started fastboot
connected to PC
started command window and entered command "fastboot flash recovery recovery.img"
then i didnt wrote sommand "fastboot reboot" as i done before
i just unpluged usb and navigate to recovery button and launched it
and VUALA im in recovery
hurraaa
just installed superSU and then rebooted.
everything works (superSU too)
i have one more question...
i downloaded twrp manager from google play
first start: asked for root permission a allowed it
then message appeard:
"The only compatible version of busybox we support is Stericson. All other cause havoc on all operations in this app. Please click yes to install Stericson busybox"
what the heck is busybox?
+Should i download it or not?
Do not use TWRP Manager, ROM Manager, CWM Manager or any other of these Tools. They often do not really work good together with "exotic" fones. Why the heck do you need TWRP manager? You have TWRP installed
Anyway - Busybox you also can download and install from Playstore. Busybox is a collection of executable terminal commands helpful for any kind of script. There are a couple of rooted apps who will ask for busybox support - so don't hesitate to install busybox - but do it directly with busybox app from playstore.
After you have installed the binaries you can de-install the busybox-app. Because all necessary binaries then are copied into /system/bin/ folder and the app itself only will become active once a new version would be available (but this is not the case very often).
ok then
magicw said:
Do not use TWRP Manager, ROM Manager, CWM Manager or any other of these Tools. They often do not really work good together with "exotic" fones. Why the heck do you need TWRP manager? You have TWRP installed
Anyway - Busybox you also can download and install from Playstore. Busybox is a collection of executable terminal commands helpful for any kind of script. There are a couple of rooted apps who will ask for busybox support - so don't hesitate to install busybox - but do it directly with busybox app from playstore.
After you have installed the binaries you can de-install the busybox-app. Because all necessary binaries then are copied into /system/bin/ folder and the app itself only will become active once a new version would be available (but this is not the case very often).
Click to expand...
Click to collapse
i have no reason to want twrp manager, i just wanted to look at this app, and i found that busybox there so i wanted to ask here
thx for answer, now i undertand