I have been coming across an issue with Bluetooth that I was wondering if anyone else has had any issues with. I was hoping the latest update would fix this but unfortunately it did not. I have bluetooth setup in my car where when I connect the phone to it the phone portion works fine I can take calls and call out but the media does not it says that it is connected but It will play music through my speaker on my phone. Now I am able to get it to work once I Restart my phone and connect it again but it will not connect to the media once I shut off my car and get back in. I have to restart my phone every time I get into my car if I want to play music through it. Just curious if anyone else was having this issue.
It's a known issue with all of the ICS roms based off the current leak they are based on, it will probably be broken until a leak with a fix or an official ICS build for the Rezound comes out.
Your options are keep restarting your phone or revert back to a GB based rom for now.
ya that's my dilemma I want the wireless tethering with the ICS but want the Bluetooth with the GBE
Related
Is it possible to put the old android 1.6 bluetooth control into a nexus ROM?
My G1 worked great with my car's built in bluetooth system, but my N1 wants to be a PITA. It refuses to stay connected, it is constantly disconnecting and reconnecting, disconnects after about 30 seconds and reconnects a couple minutes later and then repeats this cycle. (I know this because my car tells me audibly every time this happens) It also will not transfer audio to the system, or the system voice controls will not answer or start calls even when the phone and system show connected (the brief times that it does show connected). That fact makes me wonder if the bluetooth audio problems others complain about is the same issue I am having, and that their phones are not connecting properly as well. I think the issue may be caused by how the N1 treats phonebook access. With the G1 I would get a "connection complete" message when the bluetooth connects and a "transfer complete" message when the phonebook access completes. I never receive the transfer complete message for the N1
The real crazy thing is that I can get it to work if:
I do not have the phones bluetooth turned on
I then get into the car and start the car (its bluetooth then turns on)
I then turn on the phones bluetooth (if the phone does not connect to the system immediately I click connect manually)
I then must make a phone call within just a few seconds after the phone connects
After that everything works as expected. I have found no other combination of turning on or off bluetooth on the phone or car system that also works.
I was having problems with my car audio as well, until I updated to Cyanogen's latest. Everything seems to be working quite well now. What ROM are you using???
Stock ATM. The N1 is good enough stock (as opposed to the G1) but for the lack of free tethering. I'm sure it can be even better though. Staying connected to my cars system seems to be my biggest issue, audio works great when I get it to connect properly.
if got the same issue on my parrot.
but the problem still persists on the latest cyanogen mod
Yeah, I don't know what it is that is different in 2.1, but 1.6 works great with bluetooth.
I don't guess its possable to do, I hope an official fix comes soon.
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
I am having problems with ICS and the a2dp streaming after initial connection. I can't stream audio to any devices after the 2nd connection. This issue can be fixed with a cold boot (usually).
As near as I can tell this is an issue with all Rezound ICS ROMs
I have been trying to edit /etc/bluetooth/audio.conf and going through different iterations, but so far haven't been able to find the right combination (if it is even possible to fix from there).
I noticed there have been other bluetooth issues with other ICS ROMs for other devices (see: http://forum.xda-developers.com/showthread.php?t=1450962), note the a2dp fix in the changes log.
I am not sure if this is even the same issue on that ROM, but it may help provide a clue.
Anyone else have any thoughts or ideas?
Thanks!
Or a similar problem I have been having is connecting fine after initial pairing but being unable to reconnect without unpairing and a cold restart. Same problem in every ICS rom.
There's times mine will connect and work fine. Other times it says connected but sound will come out the phone speakers instead of the car speakers. This seems random and comes and goes. I haven't rebooted today and I was able to connect fine three or four times and a couple times I wasn't.
I havent been able to stream music at all.
So my Jawbone Prime was connecting fine before I updated to ICS LPQ (was on GB LA4 before) and now it doesn't even show up on the devices list even when I try to re-pair or reset the headset.
I tried 2 different sets to no avail.
Anyone know of a solution?
Connects to A2DP BT Headset (Motorola) but only allows media audio to connect. Phone audio doesnt stick.
ICS has some compatibility issues with certain bluetooth devices.
GB my phone always paired with my car stereo and streamed music without any issues.
So far every ICS release, even official, has caused my phone to reboot after streaming music over BT for 10+ minutes.
Its pretty sad they dropped the ball here. GB worked fine, and they borked it.
Well I can connect my BT keyboard fine. I just tried my Motorola BT earphones which are A2DP and it connects but won't allow phone audio to go through the BT earphones. However Media does go through. At least it detects it.
It doesn't detect it at all on the Jawbone Prime (which is not A2DP).
Update:
I managed to connect my jawbone and actually have 2 phone calls on it. After that I had the phone in my pocket and when I checked maybe 15mins later it had frozen and I had to keep power pressed to shutdown/reboot.
It kind of matches Chakker3D's pattern of working then not working. It's like there's a memory leak in the bluetooth stack? maybe I'm just spitballing here.
What I know is that in GB whenever I deactivated BT it took a good 20-25secs. In ICS it's instant to turn off or on. In GB however there was 0 issues.
I just really hope Samsung addresses it. Or if we are lucky, a dev will rework a rom so this problem is gone.
But from what I can tell, very few are having this problem.
Airbag888 said:
So my Jawbone Prime was connecting fine before I updated to ICS LPQ (was on GB LA4 before) and now it doesn't even show up on the devices list even when I try to re-pair or reset the headset.
I tried 2 different sets to no avail.
Anyone know of a solution?
Connects to A2DP BT Headset (Motorola) but only allows media audio to connect. Phone audio doesnt stick.
Click to expand...
Click to collapse
Sometimes is helps when you change kernel. Give a try
078gregory said:
Sometimes is helps when you change kernel. Give a try
Click to expand...
Click to collapse
Another update:
Without any intervention on my part other than keeping on trying it finally discovered my BT headpiece. In fact it discovered both.
Now it's still not 100% perfect because it discovers it, connects and immediately disconnects. If I press a button on the headpiece while it connects then it stays connected and it hasn't restarted/locked the phone yet. I even connected my 2nd headset (another Prime) and it worked.
Keeping fingers crossed. Now I need to see what happens when I walk out of range and back in range.
My phone has the JB update that was released to a few earlier this week. All is working very well so far, except for a Bluetooth issue I am having.
First, I have a Belkin CarAudio Connect in my truck and bluetooth works perfectly with this just like it did with ICS. I can use it for both phone calls and streaming audio without any problem. For this reason, I know that bluetooth is working on my phone after the JB update.
I also have a 2011 Jeep Grand Cherokee with the Uconnect 430N stereo system in it. With ICS, my phone worked flawlessly with this stereo. Now with JB, the phone does connect, but a few seconds after starting a phone call or staring a music stream via bluetooth, the audio drops and shortly after, the stereo no longer recognizes the phone. I have tried re-paring a couple of times without success. Since the bluetooth connection worked prior to the JB update, I assume this is a software issue with the JB update on the phone and not an issue with the stereo.
Any ideas/suggestions?
Tried a FDR? That's my only suggestion at this point.
Factory reset
Sent from my XT910 using xda premium