i accidentally flashed sk17 rom into my st15, this has resulted my touchscreen not working, i found the solution posted by javad0111, i had already flashed .62 firmware via wotanserver, but i cant flash custom kernel cos the usb debug was turn off before i bricked my phone! any help?
stevensteady said:
i accidentally flashed sk17 rom into my st15, this has resulted my touchscreen not working, i found the solution posted by javad0111, i had already flashed .62 firmware via wotanserver, but i cant flash custom kernel cos the usb debug was turn off before i bricked my phone! any help?
Click to expand...
Click to collapse
WHO SAID THAT USB DEBUGGING MUST ON...JUST POWER OF YOUR PHONE..AND PRESS VOLUME DOWN BUTTON AND CONNECT YOUR USB CABLE ..
Sent from my ST15i using xda premium
are you sure mate? i'm unable to flashed custom kernel by fastboot flash boot boot.img, stuck at waiting for device =(
stevensteady said:
are you sure mate? i'm unable to flashed custom kernel by fastboot flash boot boot.img, stuck at waiting for device =(
Click to expand...
Click to collapse
use flashtool to flash custom kernel...
HOLD VOLUME UP THEN INSERT CABLE to get in FASTBOOT MODE ...
if you want to flash it via fastboot
You can try to use a Flashtool it has fastboot option too...and you don't need to have android-sdk installed on your system. http://forum.xda-developers.com/showthread.php?t=1351309
thanks guys! was able to flash by pressing volume up instead of volume down! problem solve!
Related
THREAD OVERVIEW
Post 1 : ROMS FOR XPERIA MINI
Post 2 : ROMS FOR XPERIA MINI PRO
Post 3 : ROMS FOR XPERIA LIVE WITH WALKMAN
Post 4 : ROMS FOR XPERIA ACTIVE
Post 5 : COMMON ROMS
Post 5 : CUSTOM KERNEL
Post 6 : BRICKIG AND SOLUTION
Post 7 : CUSTOMIZATION
NOTE :
you can port any rom from other devices because XMP, XM and LWW brothers. and that is why we are in theard the same. porting means just, replace a few files. So you can do it Replace the hw_config, sensors.conf, copy smultron touch hex firmware file /etc_firmware/ and DELETE mango hex's, and edit the build prop /just replace all sk17 and mango or mini pro lines/. And this is all. Flash the mini kernel and install the rom.but for XMP, you must replace the "usr" to the physical keyboard and some file for the adjustment.
thanks to kamarush
BEFORE WE START THERE ARE SOME REQUIRMENTS TO FLASH A ROM AND KERNEL SUCH AS..
{1}.YOUR Bootloader MUST BE unlocked.I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
THERE ARE TWO WAYS OR METHODS OF UNLOCKING BOOTLOADER...
(1).OFFICIAL WAY:http://unlockbootloader.sonyericsson.com/
(2).TEST POINT METHOD:http://forum.xda-developers.com/showthread.php?t=1285285
YOU WILL VOID YOUR WARRENTY IF YOU UNLOCK YOUR BOOTLOADER...
....YOU CAN FIND MORE INFORMATION ABOUT UNLOCKING BOOTLOADER ON ABOVE LINKS....
{2}.YOU MUST BE ROOTED AND HAVE CMW(ClockWorkMode) INSTALL ON YOUR PHONE
HOW TO FLASH CMW IS GIVEN HERE:http://forum.xda-developers.com/showthread.php?t=1345741
BEST WAY TO HAVE ROOT AND CMW IS TO FLASH CUSTOM KERNEL.
IF YOU HAVE ABOVE THINGS THEN YOU ARE READY TO GO...
...TO FLASH CUSTOM KARNEL YOU WILL NEED FLASTOOL:http://forum.xda-developers.com/showthread.php?t=1351309....
POST 1
ROMS FOR XPERIA MINI
1.MiniCMSandwich AOSP Android 4.0.3 RC2:http://forum.xda-developers.com/showthread.php?t=1434001
2.Flush78_v6S:http://forum.xda-developers.com/showthread.php?t=1423058
3.Clean 'n' Tweaked - v4.1:http://forum.xda-developers.com/showthread.php?t=1417621
4.ST15i (Mini) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439293
POST 2
ROMS FOR XPERIA MINI PRO
1.NeroDroid ROM v5:http://forum.xda-developers.com/showthread.php?t=1458963
2.Lewa OS:http://forum.xda-developers.com/showthread.php?t=1462678
3.SK17i (Mini Pro) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439298
POST 3
ROMS FOR XPERIA LIVE WITH WALKMAN
1.XROM™ v1.4:http://forum.xda-developers.com/showthread.php?t=1538083
2.WT19i (Live with Walkman) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439311
3.MIUIv4 beta 2 build 2:http://forum.xda-developers.com/showthread.php?t=1490166
4.[IPHONE-STYLE]Joy os:http://forum.xda-developers.com/showthread.php?t=1540755
POST 4
ROMS FOR XPERIA ACTIVE
1.Spartan Rom V1.8.5:http://forum.xda-developers.com/showthread.php?t=1375991
2.ST17i (Active) 4.0.2.A.0.42:http://forum.xda-developers.com/showthread.php?t=1310292
POST 5
COMMON ROMS
1.CM7.2.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1226715
2.CM9.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1445821
3.HYBROM v16:http://forum.xda-developers.com/showthread.php?t=1373435
4.MIUIv4 2.3.16:http://forum.xda-developers.com/showthread.php?t=1554996
5.Xperia UXP NXT:http://forum.xda-developers.com/showthread.php?t=1520456
6.ExMIUIv4 2.3.30-r1:http://forum.xda-developers.com/showthread.php?t=1578109
7.MiniCMSandwich AOSP Android 4.0.4 RC3:http://forum.xda-developers.com/showthread.php?t=1434001
POST 6
CUSTOM KERNEL
1.[Mini/MiniPro/LiveWithWalkman/Active] Rage Kernel v2.6:http://forum.xda-developers.com/showthread.php?t=1398910
2.KRsH Kernel v3.0 (MiniPro):http://forum.xda-developers.com/showthread.php?t=1349630
3.[Mini/MiniPro/LiveWithWalkman/Active] X kernel 2.6.32.58 ZRAM:http://forum.xda-developers.com/showthread.php?t=1451150
4.NeroDroid Kernel(FOR NERODROID ROM):http://forum.xda-developers.com/showthread.php?t=1458963
5.b KERNELS(FOR SK17i-ST15i-WT19i):http://forum.xda-developers.com/showthread.php?t=1440161
6.KRsH Kernel v3.0 (Mini):http://forum.xda-developers.com/showthread.php?t=1351709
POST 6
BRICKIG AND SOLUTION
...I BRICK MY XPERIA MINI TWISE AND I MANAGE TO SOLVE IT..I AM ADDING THIS POST BEACAUSE I KNOW HOW IT FEELS WHEN YOUR MOBILE BRICKED..
{1}.IF YOU HAVE UNLOCK BOOTLOADER AND YOU ACCIDENTALLY RECEIVE FOTA THEN YOUR XPERIA WILL NOT START IT WILL JUST VIBRATE.
FOR SOLUTION GO HERE:http://forum.xda-developers.com/showthread.php?t=1126358..
{2}.IF YOU ACCIDENTALLY FLASH ANOTHER MODELS ROM ON YOUR PHONE..AND IF YOUR TOUCHSCREEN DOES NOT WORK
THEN GO HERE FOR SOLUTION:http://forum.xda-developers.com/showthread.php?t=1423562
{3}.NEXT TIME WHEN I BRICK MY MOBILE AND I ABLE TO FIND SOLUTION THEN I WILL POST HERE...
POST 7
CUSTOMIZATION
I AM ADDING THIS POST FOR THOSE WHO DONT WANT TO UNLOCK BOOTLOADER..
THAT MEANS TO CUSTOMIZE YOUR XPERIA YOU DONT NEED TO UNLOCK BOOTLOADER..
BUT YOU WILL NEED ROOT ACCESS AND CMW INSTALL ON YOUR MOBILE..
FOR THOSE WHO WANTS CMW WITH LOCK BOOTLOADER GO HERE:http://forum.xda-developers.com/showthread.php?t=1437840
THERE ARE PLENTY THREAD BUT I AM ADDING SOME OF THEM..REST YOU CAN CHECK IT OUT BY YOURSELF..
SO LETS GET STARTED..
1.Customizable Quickpanel, Flashlight toggle:http://forum.xda-developers.com/showthread.php?t=1306044
2.Xperia S v1.7:http://forum.xda-developers.com/showthread.php?t=1503570
3.IceCream Sandwich Xperia V4.0:http://forum.xda-developers.com/showthread.php?t=1453698
4.SE Mix ICS v4:http://forum.xda-developers.com/showthread.php?t=1482244
5.All In One-Live/Mini/Mini Pro/Active:http://forum.xda-developers.com/showthread.php?t=1404786
6.HTC Sense Theme:http://forum.xda-developers.com/showthread.php?t=1546345
If there is anything that I missed please send me a PM to have it added. Please provide a link in the PM, thanks.
If I helped you in anyway, please say thanks!
You should also post links to the stock kernels for the latest f/w's..... ;-)
amey2606 said:
you should also post links to the stock kernels for the latest f/w's..... ;-)
Click to expand...
Click to collapse
your request has been granted..
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
akshay13071990 said:
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
Click to expand...
Click to collapse
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
ramezzidane said:
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
Click to expand...
Click to collapse
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
akshay13071990 said:
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
Click to expand...
Click to collapse
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
ramezzidane said:
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
Click to expand...
Click to collapse
sorry dude i have tell you what i know..i cant help you..
i hope you will solve your problem in future..
try to go to service center and tell them your problem...
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
TA stands for TrimArea.....
http://forum.xda-developers.com/showthread.php?t=1126358
Ask Bin4ry about it..
He knows better.....
nice thread akshay keep it up
metalrawk said:
nice thread akshay keep it up
Click to expand...
Click to collapse
thanks..
thanks any way
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
ramezzidane said:
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
Click to expand...
Click to collapse
that is a great news..and best of luck with your new born live with walkman
akshay13071990 said:
that is a great news..and best of luck with your new born live with walkman
Click to expand...
Click to collapse
thanks dude
akshay13071990 said:
THREAD OVERVIEW
I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
Click to expand...
Click to collapse
Witch rom Can I flash with locked bootloader then?
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
Just stock rom, no more.
Sent from my SK17i using xda premium
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
all in one:http://forum.xda-developers.com/showthread.php?t=1404786
this is a kind of a rom..it changes all things..but dont have any script..but you can try rom toolbox pro from android market it has many features like sd card read speed font change,boot animation change..to do all this you need only root and cmw install...without unlocking bootloader...isnt it great.so if you want then try it..
I already mod my sk17i this way,only thoud there is something else I can do with it.Thanks any way.
Hello
My phone: sony ericsson experia Neo (MT15i)
I tried to instal CM9 but something went wrong and now i cant start my phone.(normal, recovery nor fastboot)
I downloaded CM9, extracted the boot.img file, and placed it in the fastboot folder.
Then i placed the Zip and the google apps on the SD-card.
I then rebooted the phone in Fastboot and flashed the boot.img file.
Everything looked like it went fine but the phone wasn't rebooting. I've tried alot of things now but nothing works.
The only thing that happens when I try to put on the phone is the slight vibration in the beginning and then nothing happens.
Can somebody please help me? I cant even go in recovery with CWM
I also had this problem with CM 9. You just have the flash the old kernel back. Or you can flash the whole firmware again: http://talk.sonymobile.com/thread/35239
Edit: with Flashtool.
I would have tried that, but the problem is i cant go into flashmode anymore. Nothing works.
Fastboot?
Doesn't work either
GleDel said:
Doesn't work either
Click to expand...
Click to collapse
Follow these steps
1.Download Sony Ericssion Update Service (SEUS)
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
3.If this does not work remove the battery and put it back again and do step no 2.
4.SEUS will detect ur phone and install the latest ICS i.e.4.0.4
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
samneov said:
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
Click to expand...
Click to collapse
2)why volume down?
5)seus nor pcc doesn't relock bootloader, plus if he unlocked it via official way, he won't be able to use pcc nor seus.
@OP: what happens when you try connecting in fastboot mode? No blue led? Hows your phone named in device manager?
@madfysh
I had the same problem with that CM9 kernel and I had unlocked bootloader & I recovered my phone using SUSE by the same process I wrote that's y I suggested him those steps
Sent from my MT11i using xda app-developers app
samneov said:
Follow these steps
1.Download Sony Ericssion Update Service (SEUS)
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
3.If this does not work remove the battery and put it back again and do step no 2.
4.SEUS will detect ur phone and install the latest ICS i.e.4.0.4
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
Click to expand...
Click to collapse
I will give this a try.
I think there might be a problem with the Trim Area though. I have been looking for a solution but it seems hard.
Madfysh said:
2)why volume down?
5)seus nor pcc doesn't relock bootloader, plus if he unlocked it via official way, he won't be able to use pcc nor seus.
@OP: what happens when you try connecting in fastboot mode? No blue led? Hows your phone named in device manager?
Click to expand...
Click to collapse
I was thinking there was a trim area problem so I was looking for a solution.
At first there was nothing, no device recognized when I attached it to a pc. No flastboot, no flash, no recovery, no leds, nothing at al (exept for a slight vibration in the beginning).
Then I followed the method for unlocking the boot loader with testpoint and then te pc recognized the device as a neo. But thats all. Nothing more, stil no reaction when i try to turn the phone on in any way.
I disconnected the device and now when I reconnect it it isn't recognized anymore.
GleDel said:
Hello
My phone: sony ericsson experia Neo (MT15i)
I tried to instal CM9 but something went wrong and now i cant start my phone.(normal, recovery nor fastboot)
I downloaded CM9, extracted the boot.img file, and placed it in the fastboot folder.
Then i placed the Zip and the google apps on the SD-card.
I then rebooted the phone in Fastboot and flashed the boot.img file.
Everything looked like it went fine but the phone wasn't rebooting. I've tried alot of things now but nothing works.
The only thing that happens when I try to put on the phone is the slight vibration in the beginning and then nothing happens.
Can somebody please help me? I cant even go in recovery with CWM
Click to expand...
Click to collapse
Use Flashtool, flash an Official Global ftf from SONY, then let it boot up. It will work. Only way to do it. PM me if needed
Is this the OFFICIAL CyanogenMod 9 RC1? The boot.img does not work. Use the boot.img from FXP's Unofficial CyanogenMod 9. It works. Personally though, use FXP's CM9 cause it's working better then the official one.
Before using the full restore method (The Flashtool thing) try flashing the boot.img from FXP first. Still doesn't work? Flash official, boot-up, turn off, flash FXP kernel, full-wipe, flash ROM, reboot.
My Phone is fixed.
Alejandrissimo helped me with rebuilding the Trim Area.
Everything works fine now, except connecting to 3G/HSDPA. I used to be able to connect to it but now it doesn't anymore.
Does someone knows a solution for that?
bricked
can you also help me my bricked neo v...im from .238 and i upgrade to .62 from update center...when downloading is done..i press install then my phone goes black....i try it to on sometimes, it vibrates but phone does not boot,always black screen....i try and tried to on but it stopped on vibrating..my phone have no response at all i try to reflash a rom in flash tool but it does not work the still dont boot
PLEASE HELP ME... :crying:
GleDel said:
My Phone is fixed.
Alejandrissimo helped me with rebuilding the Trim Area.
Everything works fine now, except connecting to 3G/HSDPA. I used to be able to connect to it but now it doesn't anymore.
Does someone knows a solution for that?
Click to expand...
Click to collapse
hey,, could u give me some tips that the way to my bricked neo.. . i have tried a lot of ways.. it really hit me:cyclops:
Hi everybody,
first of all thank you for dealing with my problem. Unfortunately, I was not able to find a similar problem.
My Xperia Neo (MT15i) is rooted and the bootloader is unlocked (via the official method from Sony). Afterwards I flashed the CM kernel from FreeXperia and flashed the related CM10 rom. Up to this point I was able to start my phone but the WiFi was not working. I tried different methods described in this forum but because none of these worked I switched to Lupus Kernel. Unfortunately I had the same problem here: no WiFi.
Thus I decided to flash back to stock kernel. After trying to reboot my phone it got stuck in a bootloop at the Sony logo, only removing the battery helps. I am not able to get into fastboot mode or cwmr mode anymore... what am I doing wrong?
Thanks for your help.
Regards,
Dalamar91
Dalamar91 said:
Hi everybody,
first of all thank you for dealing with my problem. Unfortunately, I was not able to find a similar problem.
My Xperia Neo (MT15i) is rooted and the bootloader is unlocked (via the official method from Sony). Afterwards I flashed the CM kernel from FreeXperia and flashed the related CM10 rom. Up to this point I was able to start my phone but the WiFi was not working. I tried different methods described in this forum but because none of these worked I switched to Lupus Kernel. Unfortunately I had the same problem here: no WiFi.
Thus I decided to flash back to stock kernel. After trying to reboot my phone it got stuck in a bootloop at the Sony logo, only removing the battery helps. I am not able to get into fastboot mode or cwmr mode anymore... what am I doing wrong?
Thanks for your help.
Regards,
Dalamar91
Click to expand...
Click to collapse
Sony Stock kernel is ICS based and CM 10 is JB based ROM.
u cant flash a ICS kernel for a JB rom and vice versa..
So just flash any JB kernel and the kernel has seperate wifi modules .. u need to flash them if u want wifi to work..
Hit "Thanks" if i helped you..
Sent from my MT11i using xda app-developers app
manoj_nike15 said:
Sony Stock kernel is ICS based and CM 10 is JB based ROM.
u cant flash a ICS kernel for a JB rom and vice versa..
So just flash any JB kernel and the kernel has seperate wifi modules .. u need to flash them if u want wifi to work..
Hit "Thanks" if i helped you..
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Thanks for your fast answer.
How can I flash a new kernel if I am not able to get into fastboot mode anymore? Menu button and plugging in USB is not working, neither is Flashtool because the devices drivers aren't initialised before the booting process restarts.
Dalamar91 said:
Thanks for your fast answer.
How can I flash a new kernel if I am not able to get into fastboot mode anymore? Menu button and plugging in USB is not working, neither is Flashtool because the devices drivers aren't initialised before the booting process restarts.
Click to expand...
Click to collapse
connect it into fastboot using ADB.
Sent from my NEO V using xda app-developers app
karanrajkapur said:
connect it into fastboot using ADB.
Sent from my NEO V using xda app-developers app
Click to expand...
Click to collapse
What exactly do you mean by using ADB?
When I try to "Reboot into fastboot mode (via ADB)" in Flashtool, I get the following log:
09/007/2013 15:07:19 - INFO - Device connected in flash mode
09/007/2013 15:07:23 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
09/007/2013 15:07:23 - INFO - Device Status: NOT FOUND
09/007/2013 15:07:24 - ERROR - This action needs a connected device
Thanks for your help.
Dalamar91 said:
Thanks for your fast answer.
How can I flash a new kernel if I am not able to get into fastboot mode anymore? Menu button and plugging in USB is not working, neither is Flashtool because the devices drivers aren't initialised before the booting process restarts.
Click to expand...
Click to collapse
U Can go to fastboot mode in this way..
Hold ur Menu Key and plug usb to ur system
now go to fastboot mode in flashtool and select kernel to flash ...
Hit "Thanks" if i helped you..
manoj_nike15 said:
U Can go to fastboot mode in this way..
Hold ur Menu Key and plug usb to ur system
now go to fastboot mode in flashtool and select kernel to flash ...
Hit "Thanks" if i helped you..
Click to expand...
Click to collapse
As I wrote in my last post, this way is not working anymore.
The LED light turns green and not blue anymore...
09/015/2013 15:15:39 - INFO - Device connected with USB debugging off
09/015/2013 15:15:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/017/2013 15:17:40 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
09/017/2013 15:17:40 - INFO - Device Status: NOT FOUND
Is there a way that I can swith USB debugging on, without being able to start my mobile?
Hello that such I would like to ask for your help, install the kernel DoomKernel V10 by recovery philz and perform proper installation but the now on my z2 xperia d6503 will not turn on, only vibrates, and if I'm still pushing still vibrates but does not light nor can enter recovery mode, when I connect the cable usb only lights the Red led, but the pc doesn't recognize it, someone I could help please. (I speak Spanish and I'm using the google translator, I hope to understand the failures spelling and conjugation) thank you. :crying::crying:
Your bootloader is unlocked right? You can't use custom kernels if it isn't.
Flash stock kernel via adb /flashtool and it should boot
Sent from my Xperia Z2 using Tapatalk
Mr.R™ said:
Your bootloader is unlocked right? You can't use custom kernels if it isn't.
Flash stock kernel via adb /flashtool and it should boot
Sent from my Xperia Z2 using Tapatalk
Click to expand...
Click to collapse
try pushing power button and volume up at same time
Hi, already solve the problem through flashtool, thank you all.
i know its an total fail but i tried to install the doomkernel through twrp,but with locked bootloader >,< now the device is stuck. When i try to turn it on it just vibrates once. The flashtool can see the device but cant do anything becuase boot command is not allowed. Any ides? Pls help [Edit:in flashtool it looks like working in both flash and fastboot mode,but cant do anything anyway]
Have you installed the correct drivers in the flashtool folder?
Sent from my Xperia Z2 using Tapatalk
Guess that was the problem,reinstalled drivers and it worked, thanks
Hello guys, today it's a really bad day for me. My M4 is now totally bricked.
Here's why:
I installed CM 12.1 and I will get back to stock, but my phone not enter in flashmode. So I flashed a zip file of stock rom but it not booted. I want to get Flashmode back, and I find a flashable zip that restore flashmode in Sony Xperia M. I flashed it and... bye bye M4. Now the phone only enter in SOMC FLASH DEVICE, Flashtool not flash, but say:
Device connected with USB debugging OFF. For 2011 devices line be sure that you aren't in MTP mode.
Sometimes enter in Unkown device. I have all drivers and I'm using original cable with USB 2.0 port. Now I'm trying to restore with PCC.
I removed the battery connectors for a while, put them back, but nothing changed.
My battery is at 100%.
What should I do?
So flash mode does not work anymore? This may seem inappropriate to say now that your phone is dead but if you have technical experience you could make a guide to opening and repairing the M4 or at least take pictures. But if flash mode or fastboot works try to restore it first
Well... Sorry to hear that :/ but uh..
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
It uses a MSM8939 board same as ours. It's up to you if you want to attempt it but I'm suggesting not to.. Good luck anyway!
Thank you very much! Firstly I will try to send it to the shop where I buyd (sorry my english) and if they don't change the phone I will try this. Really thank you again!
EDIT: Ok, I am following the tutorial, but my M4 show only qhsusb_bulk with no driver. What I have to do?
alby_var said:
Hello guys, today it's a really bad day for me. My M4 is now totally bricked.
Here's why:
I installed CM 12.1 and I will get back to stock, but my phone not enter in flashmode. So I flashed a zip file of stock rom but it not booted. I want to get Flashmode back, and I find a flashable zip that restore flashmode in Sony Xperia M. I flashed it and... bye bye M4. Now the phone only enter in SOMC FLASH DEVICE, Flashtool not flash, but say:
Device connected with USB debugging OFF. For 2011 devices line be sure that you aren't in MTP mode.
Sometimes enter in Unkown device. I have all drivers and I'm using original cable with USB 2.0 port. Now I'm trying to restore with PCC.
I removed the battery connectors for a while, put them back, but nothing changed.
My battery is at 100%.
What should I do?
Click to expand...
Click to collapse
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
samysimbu said:
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
Click to expand...
Click to collapse
probably you flashed custom kernel/rom with bootloader unlock=NO , you can try the S1 tool to restore your bootloader but you must have the original one.
PiSpecialist said:
probably you flashed custom kernel/rom with bootloader unlock=NO , you can try the S1 tool to restore your bootloader but you must have the original one.
Click to expand...
Click to collapse
Thanx for reply,
My bootloader status is yes.
I think wrong kernel makes this problem,
By the way, how s1 bootloader restore.
Any tools?
And how get original bootloader.
Is loader.sin is helpful from ftf?
Thank u.
I'm waiting for your reply
samysimbu said:
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
Click to expand...
Click to collapse
samysimbu said:
Thanx for reply,
My bootloader status is yes.
I think wrong kernel makes this problem,
By the way, how s1 bootloader restore.
Any tools?
And how get original bootloader.
Is loader.sin is helpful from ftf?
Thank u.
I'm waiting for your reply
Click to expand...
Click to collapse
you must have qhsusb_dload detected if yes then download this zip extract it and run s1tool, you must copy boot.sin and s1boot from your stock rom, the two files inside the zip are not for your C3, but you can try at your own risk.
PiSpecialist said:
you must have qhsusb_dload detected if yes then download this zip extract it and run s1tool, you must copy boot.sin and s1boot from your stock rom, the two files inside the zip are not for your C3, but you can try at your own risk.
Click to expand...
Click to collapse
Friend, Google Drive file need permission. I did leave request to the file owner. If u r the owner pls give permission to download access