Latest CWM - HTC EVO 3D

Hi guys. Where can I get the latest non-touch screen version of Clockworkmod?
Thanks in Advance
Sent From My Optimized R3Dimension

Download rom manager it should get you the last one directly from the source and install it easy on your phone
Sent from my PG86100 using Tapatalk

megabiteg said:
Download rom manager it should get you the last one directly from the source and install it easy on your phone
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I need to flash in fastboot because with rom manager is not working
Hboot 1.5

http://clockworkmod.com/rommanager
Sent from my HTC EVO 3D GSM using Tapatalk

vanisleguy1976 said:
http://clockworkmod.com/rommanager
Sent from my HTC EVO 3D GSM using Tapatalk
Click to expand...
Click to collapse
My phone bootloops with this just show the first white htc screen it stays in there for couple of minutes and then the screen goes black and not responding I have to remove the battery to make my phone work again.
Sent From My Optimized R3Dimension

See the thread in my signature for links. If u want regular cwm recovery, the only one that works with Hboot /S-on is v 4.0.1.4
Sent from my PG86100 using Tapatalk

mpgrimm2 said:
See the thread in my signature for links. If u want regular cwm recovery, the only one that works with Hboot /S-on is v 4.0.1.4
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Nice thanks
I'm hboot 1.5 so yea s-on
Sent From My Optimized R3Dimension

Related

[Q] why is my com.phone.android stop responding on 2.17 based roms

So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
tuscani1821 said:
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Have you tried flashing the kernel only after the ROM?
Sent from my PG86100 using Tapatalk
tuscani1821 said:
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Fix permissions from Rom Manager or the advanced option in CWM and reboot.
If that doesn't help, it's just a bad flash. Don't fret. Do an RUU and re-update the radio. There is no point in updating the firmware because when you flash a new ROM, you're replacing it. Then you can go ahead and S-OFF, root, flash a custom recovery, flash a ROM and kernel, etc.
Sent from a Shooter running Android 4.0.3 via XDA Premium.
megabiteg said:
Have you tried flashing the kernel only after the ROM?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Do you mean the stock kernel? I can't seem to locate the new one
Sent from my Transformer TF101 using Tapatalk
tuscani1821 said:
Do you mean the stock kernel? I can't seem to locate the new one
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
This is stock 2.17 boot.img
http://dl.dropbox.com/u/2437198/boot.img
hope it works for you
Just to make sure. I flash through fastboot or recovery?
Sent from my PG86100 using Tapatalk
tuscani1821 said:
Just to make sure. I flash through fastboot or recovery?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yes sir, fastboot flash boot boot.img would be the command to use once you set the phone to fastboot mode
Sent from my PG86100 using Tapatalk

Downgrade cwm

Hello I installed the cwm version 5.0.2.0 via rom manager. Now I have this bug where I can not charge my phone when it is off.
Can I downgrade or upgrade to other version without this bug? How I have to do it?
Please help.
Sent from my HTC EVO 3D X515m using XDA
kilasat said:
Hello I installed the cwm version 5.0.2.0 via rom manager. Now I have this bug where I can not charge my phone when it is off.
Can I downgrade or upgrade to other version without this bug? How I have to do it?
Please help.
Sent from my HTC EVO 3D X515m using XDA
Click to expand...
Click to collapse
You can downgrade with 2 ways. In cmw settings you can choose an earlier recovery or flash the desired one via adb.
Use New 4ext recovery instead.. much better.. ;-)
Sent from my HTC EVO 3D GSM using XDA
rahditzz said:
Use New 4ext recovery instead.. much better.. ;-)
Sent from my HTC EVO 3D GSM using XDA
Click to expand...
Click to collapse
Please tell me where to download and how to downgrade.
Sent from my HTC EVO 3D X515m using XDA
nikosblade said:
You can downgrade with 2 ways. In cmw settings you can choose an earlier recovery or flash the desired one via adb.
Click to expand...
Click to collapse
You mean recoverys in the rom manager? Are they without this offline charging bug?
How to flash via adb?
Sent from my HTC EVO 3D X515m using XDA
One more question. Can I use cwm backups with the new 4ext recovery?
Sent from my HTC EVO 3D X515m using XDA
kilasat said:
One more question. Can I use cwm backups with the new 4ext recovery?
Sent from my HTC EVO 3D X515m using XDA
Click to expand...
Click to collapse
Yes, the guy who started the thread about the 4ext recovery said that backups made in any cwm version will work with his recovery. I personally don't understand this bug you're reporting. Are you saying that your phone isn't charging while plugged in while its in recovery? CWM 5.0.2.0 charges just fine in recovery. The only bug with charging on that recovery is that the charge light won't turn on. Doesn't mean it's not actually charging...
Ones my phone is empty and powers off I can not charge it. The only way to power it on again is to use some adb command to boot it in fastboot and charge a bit via USB from pc. I am not the only one with this behavior and cwm 5.0.2.0.
BTW. Updated to 4ext and very happy now. Did not try the old backups yet. But I saw an option to convert old backups in ext4
Sent from my HTC EVO 3D X515m using XDA

[Q] Serious problem

Hello Guys!
First of all, i wanna apologize. I know this thread might be rude because im noob but i need my phone in 2 days (since i got trip to france)
Im on GSM Evo 3d Hboot 1.53. I tried to flash King Cobra ICS rom. I got bootloops. I tried to fix it as here on htcevohacks site using DumLock . It havent helped. I was using 4ext recovery and i think it is a problem. Now i changed my recovery to CWM Revolutionary. When i reboot (or boot) my phone normally or after restore of my normal room it boots up with 4ext recovery. What should I do?
Thanks very much for your help! i Need this damn phone!
Can you access the recovery?
Are you s-on or s-off?
If you're s-on, then go into 4ext recovery and enable smart flash, then flash a working custom rom (plenty of them out there)
Do the same if you're s-off, just don't enable smart flash
Remember to wipe all the normal partitions before flashing, this will wipe all your data though
Sent from my HTC EVO 3D X515m using xda app-developers app
Moonbloom said:
Can you access the recovery?
Are you s-on or s-off?
If you're s-on, then go into 4ext recovery and enable smart flash, then flash a working custom rom (plenty of them out there)
Do the same if you're s-off, just don't enable smart flash
Remember to wipe all the normal partitions before flashing, this will wipe all your data though
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
I'm s-on. My recovery now is CWM. I think i gonna RELOCK my phone and install stock RUU. Good idea? Is it safe?
Guys have you got any ideas? I need this phone ASAP!
Maybe if u do things here http://forum.xda-developers.com/showthread.php?t=1743466 it will help? I beg for some help!
Thanks
m1nty said:
Guys have you got any ideas? I need this phone ASAP!
Maybe if u do things here http://forum.xda-developers.com/showthread.php?t=1743466 it will help? I beg for some help!
Thanks
Click to expand...
Click to collapse
Since this is an emergency, I recommend you flash a Gingerbread Rom since those seem to flash better with s-on phones. Use 4ext and set it to s-on mode. Then flash a GB Rom like leedroid or mwakious.
Sent from my ICS 3VO with Tapatalk 2
m1nty said:
I'm s-on. My recovery now is CWM. I think i gonna RELOCK my phone and install stock RUU. Good idea? Is it safe?
Click to expand...
Click to collapse
Not going to work. It will not install.
Sent from my HTC EVO 3D X515m using xda premium
coal686 said:
Since this is an emergency, I recommend you flash a Gingerbread Rom since those seem to flash better with s-on phones. Use 4ext and set it to s-on mode. Then flash a GB Rom like leedroid or mwakious.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
GB will not boot with 1.53.007
Sent from my HTC EVO 3D X515m using xda premium
KrewsialNL said:
GB will not boot with 1.53.007
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Good to know. I'm CDMA, so I learn about Gsm from the Gsm people.
Sent from my ICS 3VO with Tapatalk 2
1. Download CoolExe's ROM
2. Copy boot.img from that ROM into your adb folder
3. Install ROM trough cwm
4. Reboot into Fastboot and use
Fastboot flash boot boot.img
5. Reboot.
This worked for me, after unlocking (htcdev) and installing cwm on 1.53.007 hboot.
Sent from my HTC EVO 3D X515m using xda premium
coal686 said:
Good to know. I'm CDMA, so I learn about Gsm from the Gsm people.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
I have no idea what the differences are when it comes to installing for GSM and CDMA. I guess we all learn as we help each other
Sent from my HTC EVO 3D X515m using xda premium
KrewsialNL said:
1. Download CoolExe's ROM
2. Copy boot.img from that ROM into your adb folder
3. Install ROM trough cwm
4. Reboot into Fastboot and use
Fastboot flash boot boot.img
5. Reboot.
This worked for me, after unlocking (htcdev) and installing cwm on 1.53.007 hboot.
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Man, thanks ALOT! I gonna try it tommorow and will post what happens. In worst scenario i goona make a gold card and install fresh RUU.
(adb folder is the one where i got fastboot files, right?)
If it gonna work i owe you a good, polish beer !
Hi, u can try this
- download boot.img http://db.tt/kEUVhnvV
- flash custom rom
- pull out battery
- go to bootloader and flash boot boot.img
- working for me, hb 1.53.0007 s-on
Sent from my HTC EVO 3D X515m using xda premium
iamaniff said:
Hi, u can try this
- download boot.img
- flash custom rom
- pull out battery
- go to bootloader and flash boot boot.img
- working for me, hb 1.53.0007 s-on
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Thanks but it is same idea that KrewsialNL gave. I gonna try it now. Thanks anyway!
KrewsialNL is IS working! Thank alot!!! You just have saved my trip (my phone = music player) If you gonna be in western-poland contact me so i could buy you good beer!
Again thanks
PROBLEM SOLVED THX!
m1nty said:
KrewsialNL is IS working! Thank alot!!! You just have saved my trip (my phone = music player) If you gonna be in western-poland contact me so i could buy you good beer!
Again thanks
PROBLEM SOLVED THX!
Click to expand...
Click to collapse
Im glad I could help, buddy
Having a Romanian beer right now, to your succes ;-)
Sent from my HTC EVO 3D X515m using xda premium

Touchscreen wont work

I recieved a HTC jewel yesterday already s-off so I flashed tarp recovery latest version and it installed Su for me now the problem is every Rom that I've tried flashing the touchscreen feature doesn't work and I just can't figure out what's going wrong I'm rooted and s-off'd someone help
Sent from my EVO using xda premium
montoya.brandon said:
I recieved a HTC jewel yesterday already s-off so I flashed tarp recovery latest version and it installed Su for me now the problem is every Rom that I've tried flashing the touchscreen feature doesn't work and I just can't figure out what's going wrong I'm rooted and s-off'd someone help
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I think you should look here
http://themikmik.com/showthread.php...wel-Firmware-Collection-Latest-3-16-651-3-OTA
its a driver issue with the touch screen
budeone said:
I think you should look here
http://themikmik.com/showthread.php...wel-Firmware-Collection-Latest-3-16-651-3-OTA
its a driver issue with the touch screen
Click to expand...
Click to collapse
Thank u will try and report back later
Sent from my EVO using xda premium
Quick question do I install the latest firmware then reflash the Rom???
Sent from my EVO using xda premium
montoya.brandon said:
Quick question do I install the latest firmware then reflash the Rom???
Sent from my EVO using xda premium
Click to expand...
Click to collapse
That is probably the best way.

[TOOL]RootMyShooter([Un]lock, Root, Flash Recoveries)

Screenshot(s)
Features
Root ( SuperUser + BusyBox)
Un/Relock using HTCDev method
Flash recovery
Automated SU/BusyBox Zip and recovery updates
Requirements
.NET Framework 3.5 or higher
Known Bugs
none
Download & more
http://sebrut.github.io/RootMyShooter/
Thanks. I'm already rooted but tools like this are always great.
Sent from my HTCEVOV4G using Tapatalk 2
NVM,i've found the download link
Thanks bro.
dosnt unlock my phone just stays in fastboot, help?
symbiiote said:
dosnt unlock my phone just stays in fastboot, help?
Click to expand...
Click to collapse
Thanks for reporting, working on it
Pushed an update: http://d-h.st/kAW
Does this work on hboot 1.58?
Sent from my PG86100 using xda premium
PMGRANDS said:
Does this work on hboot 1.58?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
It should, if you have problrms, please look into this thread.

Categories

Resources