After upgrading my phone to GingerMod-6.1 (http://forum.xda-developers.com/showthread.php?t=1400023) my phone could not create an AccessPoint (Setting->Wifi & Network->Mobile network->AccessPoint) because:
- MCC, MNC are required fields, so for awhile searching I found value MCC, MNC of my network provider (452 and 01), but MNC must be at least 3 digits
After that I install AccessPoint over Setting message from my Network Provider, finally installed AccessPoint, but now my phone still could not connect to the Internet (although 3G signal is very strong).
One more: whenever I create new AccessPoint with valid values of MCC, MNC, after press Save, the phone's access point list still empty with out any warning message????
With the old ROM, I even dont need to enter value of MCC and MNC
Anybody tell me why ??? I dont want to upgrading to another firmware because my personal data
Related
Hey everyone.....
I'm a newbie so please be gentle....
I've had my phone for about 2weeks now. Last week I got it unlocked but now I'm having problems with the wap connection from fido.
Here is what I have.
t-mobile xda with fido sim
running xda-developers special edition rom v1.2
rom ver: 3.17.03 eng
rom date: 05/15/03
radio ver: 6.24.00
Protocol: 324e4
I talked to fido and they told me that because I am on prepaid they don't offer GPRS but I can connect to wap ??? I am still learning about the two, but I don't think you need to have both, but I could be wrong. anyway I talked to them and they enabled mms and wap on my account about 3 days ago so I should be able to access it by now.
here is the information they gave me.
APN: wap.fido.ca or internet.fido.ca
IP: 205.151.011.011
user: fido
pwd: fido
port: 9201
#: *99#
so I've tried multiple combinations of the above but nothing seems to work, can anyone tell me if they have had any luck getting connected with fido prepaid and how you did it.
Here is what I tried.
settings --> connection --> connections
new...
under general --> change name to wap settings
under modem --> new...
rename to wap
select a modem --> tried both celluar line
--> clicked advanced left port settings
--> TCP/IP settings
--> select use specific IP address
--> entered 205.151.011.011
--> also tried use server assigned IP address
--> Name servers
--> select use specific IP address
--> entered 205.151.011.011
--> also tried use server assigned IP address
clicked OK to accept advanced settings
clicked NEXT
--> left country code blank
--> left area code blank
--> entered *99# for phone number
--> also tried wap.fido.ca for phone number
clicked FINISHED
clicked PROXY SETTINGS
--> selected this network connects to the internet
--> selected this network uses a proxy server to connect to the internet
--> entered 205.151.011.011
--> also tried it with wap.fido.ca
--> tried setting wap ip and port with above information
when I try to connect it says dialing and then always comes back with there is no answer at the number you have dialed.....etc....
1. go to Start-> Settings, choose the Connections tab, choose Connections, then click on the “add a new modem connection” link.
2. call the connection Fido/Rogers Internet, and selet the Modem as Cellular Line (GPRS). Press Next.
3. Access Point Name, internet.fido.ca if you are on Fido or internet.com if you are on Rogers. Press Next.
4. User name and password are fido/fido if you are on Fido, or wapuser1/wap if you are on Rogers. As for domain, 205.151.011.011 for Fido or 208.200.067.150 for Rogers. Press finish.
5. add another connection, and call the new one Fido/Rogers MMS, Cellular Line (GPRS) modem. Press next.
6. Access point name, mms.fido.ca if you are on oFido or media.com if you are on Rogers. Press next.
7. User name and password are fido/fido if you are on Fido, or media/mda01 for Rogers. As for domain, 205.151.011.013 for Fido or 172.025.000.107 for rogers. Press finish.
8. go to start -> Messaging, Tools menu on the bottom, MMS Settings.
9. in the preferences tab, connect via “my ISP.” Go to the servers tab.
10. press New, for Server Name type in Fido/Rogers MMS, Gateway 205.151.011.013 for fido or 172.025.000.107 for rogers, port number is 9201 for both, Server Address is http://mms.fido.ca for fido and http://media.com for Rogers. Press OK.
11. set the new account you’ve just set up as default, then delete the default account.
12. you’re done!
Heya ,
My MMS is not working after flashing a custom rom ( HTC ONE X on VirginMobile Australia ).
I realize its to do with the APN settings , I have updated them manually but the MNC field needs to show : 02 , currently its set to 029 - if I change it , it deletes the whole new APN I have put in and Im left with no connection at all.
Is there anyway to change this MNC field? I read on another forum that there is a way through ES File Explorer... going into system/etc and the APN file - but I tried that , and there is def. no APN file in system
Thanks
I'm having the exact same issue - were you able to resolve?
Heya,I'm not sure which country your in.. but I found a solution here ( Oz ) you just have to leave the MNC to whatever it has defaulted to, no point changing it because it won't save... And manually set up APN for internet and APN for mms for your carrier ( settings usually found on the carriers website ) . Just don't try to change MNC ,leave whatever your phone has input. It should still work.
Hope that helps ?
Sent from my HTC One X using xda app-developers app
I have a tablet AOC Breeze model MW0712 with Android 4.1.1.
When I want to save an APN I do: Settings -> Mobile networks -> Access Point Names -> New APN
But after editing the APN settings, there are no button to save the changes.
The only proven way I have to save an APN is typing in the fields:
Name
APN
Username
Password
and leaving blank the MCC, MNC, Authentification Type and APN Type fields. With this way the APN is saved but doesn't work. If I edit the APN I've saved and I put the values for these fields, the APN disappears.
With Root Explorer I open the apns-conf.xml file (readonly) and I see full of different APNs, but APN selection screen (Settings -> Mobile networks -> Access Point Names) is empty.
I haven't rooted the tablet.
This is how I got LTE to work permanently on a Videotron G2 after much Googling. It may not be the best solution, but it does the job for me !
I am not responsible if anything happens to your phone. There are tools to unbrick it though
First, you need to have an LTE SIM card (good luck with that one) and a rooted phone
Second, you've got to rename "LteConfigs.apk" in system/apps (Could be "LteConfigs.apk.bck")
Third, create this new APN and select it :
Name: Videotron LTE
APN : media.ng
MMSC: http://media.videotron.com
MCC : 302
MNC : 500
APN Type: default,mms,supl
Leave all other fields empty.
Lastly, reboot the phone then go to Parameters, Network and connection sharing, Mobile networks, Network mode and select "GSM/WCDMA/LTE auto".
Warning: Once rooted, it's best to unroot before getting any OTA updates, but first rename "LteConfigs.apk", else the OTA will fail.
It has been easier for me
This is what I did:
First, make sutre your device is upgraded with KitKat. Then, ask for a LTE SIM card on a Videotron Store (employes are willing to give it, even if the LG G2 is not yet compatible).
Once the LTE sim card is inserted and "configured" by Videotron, go on the telephone keypad and type * #* #4636 #*#*
Right after tou type that, you arrive on the hidden menu of the phone. Once you are there, go into the phone information and switch the favorite network you want to use for LTE only. The network should switch to LTE mode. When it is done, change again the favorite network for LTE/WCDMA/GSM. If you don't do that, you will not be able to place a phone call. If it does not work, you can try to search the available network in SYSTEM SETTINGS, NETWORK, THETHERING & NETWORK, MOBILE NETWORK, NETWORK OPERATOR, SEARCH NETWORK. Hopefully a videotron LTE network will be availlable (chose Videotron PRT).
Good luck! The experience is clearly enhanced on the LTE network.
im trying to add bt one phone apn but if i edit the MNC if fails to save , is there a way to edit my apn i made in text editor or another way ?
thanks