Hello everyone,
I was using VeganTab as my ROM of choice for a long time, and recently switched to CyanogenMod7 for a change and a more traditional Android feel.
With VeganTab, I had no issues using the Market. Every app I wanted to download was available in the market. Using CyanogenMod7, when I go to download apps I get a "this application is not available for your device" message on several apps. Firefox being one of them, which the gTablet should be able to support.
Why would one ROM work and the other doesn't on the same device? Has anyone else encountered this and know how to fix it?
Hello, I have one Gtab running CM7 what version/build are you on? Which apps are not showing up other than Firefox? Have you modified anything (build.prop)? If I remember right I had to modify the build.prop to get some apps to show up.
The apps in the market are set up to show only to devices that they are designed to be run on. When you change roms, your device shows up differently to the Market, so some apps might appear that weren't there before and some may dissappear. Read through the thread where you got the rom from and you may find some tips. Also as a temp. solution you can download the .apk files for many apps either to your PC or the the tablet and "side load" it (go to file manager and tap the downloaded .apk to install). Open a root file explorer and go to /system and open build.prop. Let me know what is says for product board, region and lcd density.
Thanks for the quick response Dave.
So far, Agenda Widget and Firefox are the two I can't get through the market. I haven't tried a ton of others yet.
I've been playing with the bool.prop file a little bit, based on tutorials I've seen here and at other forums. This thread seems to offer the best advice, but didn't work for me.
Below are my build.prop values at current time:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRI40
ro.build.display.id=GRI40
ro.build.version.incremental=eng.cyanogenmod.20110505.210139
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
ro.build.date=Thu May 5 21:02:03 CDT 2011
ro.build.date.utc=0
ro.build.type=user
ro.build.user=cyanogenmod
ro.build.host=scout73
ro.build.tags=test-keys
ro.product.model=GTablet
ro.product.brand=passion
#ro.product.brand=nvidia
ro.product.name=passion
#ro.product.name=harmony
ro.product.device=olympus
#ro.product.device=harmony
ro.product.board=harmony
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=malata
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=harmony
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=passion-user 2.3.3 GRI40 102588 release-keys
ro.build.fingerprint=nvidia/harmony/harmony/harmony:2.2/FRF91/20101123.172729:eng/test-keys
# end build properties
#
# system.prop for harmony
#
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
# Density set to 161 to allow market to function properly
ro.sf.lcd_density=161
wifi.interface = wlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# For emmc phone storage
ro.phone_storage = 1
# Add external mount points
ro.additionalmounts=/mnt/emmc;/mnt/usbdisk
# Add reference RIL
rild.libpath=/system/lib/libreference-ril.so
rild.libargs=-d /dev/ttyS0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.setupwizard.enable_bypass=1
keyguard.no_require_sim=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.modversion=CyanogenMod-7.0.3-Harmony
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Looks from your build.prop file that you are on an older build of CM7. The apps you mentioned, Firefox and Firefox Beta, and the Agenda Widget show up and work on mine. You could try using some of the values in my .prop file here, or update to a newer version of CM7. You might be able to install over your current build without wiping your data, but back up first of course.
Thanks Dave. Can you link me to a stable, updated version of CM7?
There is a CM7 rom hosted here at XDA:
CYANOGENMOD7.2.0-RC0-BUILD98-REPACK
Or you can go to Cyanogenmod Wiki. Don't forget to download the Gapps separately from the bottom of the same page and install them too.
I apologize in advance if it is not allowed to post a link to their wiki page .
Actually I have had this problem ALOT, no matter what version of CM7 I use on it. Its even worse when the new Market gets pushed to it, I usually have to downgrade it back and remove the MarketUpdater.apk so it stays on the old one.
I am running the ICS Alpha/Beta (forget which) right now so everything works, albeit very slow.
I had the same issue it's the odd LCD density of 161 that market doesn't like. I changed mine to 200 then do the standard market fix reboot and it should be fine.
Sent from my HTC Glacier using xda premium
Related
I backed up my build.prop as I edited a copy. Now I reverted to the old one and I am having error. I am guess I might have screwed up the backup somehow.
Could someone please verify a couple things below in the original build.prop?
ro.product.model=MB860
ro.product.model.internal=MB860
ro.product.brand=MOTO
ro.product.name=BELCA
ro.product.device=olympus <------?
ro.product.board=olympus <------?
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=CA
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=OLYFR_U4_1.5.7
ro.build.display.id=OLYFR_U4_1.5.7
ro.build.version.incremental=1299003836
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=Tue Mar 1 09:39:40 PST 2011
ro.build.date.utc=1299001180
ro.build.type=user
ro.build.user=fpgh48
ro.build.host=ca25rhe85
ro.build.tags=ota-rel-keys,release-keys
ro.product.model=MB860
ro.product.model.internal=MB860
ro.product.brand=MOTO
ro.product.name=olyatt
ro.product.device=olympus
ro.product.board=olympus
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=olyatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=olympus-user 2.2.1 OLYFR_U4_1.5.7 1299003836 ota-rel-keys,release-keys
ro.build.fingerprint=MOTO/olyatt/olympus/olympus:2.2.1/OLYFR_U4_1.5.7/1299003836:user/ota-rel-keys,release-keys
# end build properties
Thanks for this, good to know I didn't screw things up.
Hope this helps you as little this is a stock build prop from 1.5.7 from ATT
What Kinda Error Are you having ?
Certain apps a opening up in a smaller resolution and not using the full screen when they used to open up in full screen. Also some apps that worked before are now force closing, this all happened after I copied the build.prop and edited it for use of a game.
Try to clear your dalvic cache,after checking build prop if you want I will post my whole build prop maybe there was a setting changed. I know I saw some commands about Res. Text back let me know I will post whole file also like I said try to clear the dalvic cache. You can download a app off market to do it or use cwm if you have it installed
AT&T ATRIX - VERSION 2.3.4 ROOTED BL UNLOCKED
I have tried to clear the devik cache and it didn't work.
Here is the build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=OLYLA_U4_0.37.23
ro.build.display.id=OLYLA_U4_0.37.23
ro.build.version.incremental=1306604023
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.2
ro.build.date=Mon May 23 10:46:32 BRT 2011
ro.build.date.utc=1306158392
ro.build.type=user
ro.build.user=wmb050
ro.build.host=zbr05lnxdroid07
ro.build.tags=ota-rel-keys,release-keys
ro.product.model=MB860
ro.product.model.internal=MB860
ro.product.brand=MOTO
ro.product.name=BELCA
ro.product.device=olympus
ro.product.board=olympus
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=CA
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=olympus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=olympus-user 2.2.2 OLYLA_U4_0.37.23 1306604023 ota-rel-keys,release-keys
ro.build.fingerprint=MOTO/BELCA/olympus/olympus:2.2.2/OLYLA_U4_0.37.23/1306604023:user/ota-rel-keys,release-keys
# end build properties
#BEGIN ikolympus-145 ndkj78 04/29/10 add properties for RIL
rild.libpath=/system/lib/libmoto_ril.so
#ikolymp-874 increment channels to support EFEM
persist.ril.mux.noofchannels=9
persist.ril.mux.ttydevice=/dev/ttyHS3
#Begin IKOLYMP-2372 jqc837 31.aug.10 Short music file set as ringtone does not play in loop when receiving incoming call
#Begin IKOLYMP-425 jqc837 31.aug.10 ro.cdma.home.operator.numeric should not be set
ro.telephony.call_ring.multiple=false
#End IKOLYMP-2372 IKOLYMP-425
#added property for modem ikolympus-203
persist.ril.modem.ttydevice=/dev/ttySPI0
#added property for default RIL mode to be UMTS ikolymp2180
persist.ril.modem.mode=2
#IKOLYMP-4257 add feature GENERIC_OEM_HOOK flag
#IKOLYMP-4894 add feature MUX_PANIC_NOTIF flag
#IKOLYMP-5747 add feature BDTSE_FOR_DTMF flag
#IKOLYMP-7714 Remove feature BDTSE_FOR_DTMF. Revert to DTSE for DTMF
#IKOLYMP-8033 Restore BDTSE_FOR_DTMF.* Remove GENERIC_OEM_HOOK (no longer used)
persist.ril.features=0x24
#IKOLYMP-9894 Increase the PPP max failure threshold to 12
#IKOLYMP-10006 Increase the PPP max failure threshold to 16
persist.ril.pppd.start.fail.max=16
#end
#IKOLYMP-9157 libgps send_rds retry number+1
persist.libgps.send.rds.retry=4
ro.hdmi.mirror.enable=false
ro.hdmi.default.app=
hw.overlay.path.config=
# temporary enable AT&T NSUI feature from system prop.
# This should be removed once Flex is enabled in Olympus.
ro.mot.FTR.NSUI=true
# for larger screen support
# 3.75" WVGA == 248dpi
# 4.0" qHD == 275dpi
ro.sf.lcd_density=240
dalvik.vm.heapsize=32m
# Enable FP sensor
ro.mot.hw.fingerprint.enable=1
# required for UDD backup tcmd
ro.mot.hw.calibratedImager=1
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
#For enabling Wispr Feature
ro.mot.wifi.hotspot=0
# To enable Google Froyo Tethering (USB & WIFI hotspot)
ro.tether.denied=false
# To set wifi (AP) driver's firmware path
ro.wifi-ap.fw-path=/system/etc/firmware/wifi/sdio-g-cdc-roml-reclaim-wme-apsta-idsup-idauth.bin
# Enabling EONS feature IKOLYMP-1962
persist.cust.tel.eons=1
ro.opengles.version = 131072
# For docked touchpad keyboard map
android.keylayout.evfwd=/system/usr/keylayout/evfwd.kl
android.keychar.evfwd=/system/usr/keychars/evfwd.kcm.bin
# To send 70 touch events per second
windowsmgr.max_events_per_sec = 70
debug.mot.extwmlog=0
debug.mot.extamlog=0
#proximit sensor screen off delay
mot.proximity.delay=450
#proximit sensor disable touch distance
mot.proximity.distance=60
# Enable HAC support
ro.mot.hw.HAC=1
# BEGIN Motorola, a17262, 8-Dec-2010, IKXOLYMPLA-93 turn off entitlement check
ro.mot.entitlement_check=false
# END
# BEGIN Motorola, w30495 IKOLYMP-9553, add property to control maximum number of hidden apps
ro.MAX_HIDDEN_APPS=50
# END
# Enable APN authentication for a specific MCCMNC - IKOLYMP-9071
umts.apn_authentication.enable=302610
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=false
ro.default_usb_mode=0
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.2_r10
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.ms=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.config.sync=no
ro.browser.useragent=0
ro.url.safetylegal=http://www.motorola.com/staticfiles/Support/legal/?model=MB860
gsm.sim.mot.simswap=1
ro.config.sync=no
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.aud.hz=44100
ro.media.enc.hprof.aud.ch=2
ro.media.enc.hprof.codec.aud=aac
ro.media.enc.hprof.aud.bps=128000
ro.media.enc.hprof.vid.bps=4000000
ro.media.enc.hprof.vid.width=1280
ro.media.enc.hprof.vid.height=720
ro.media.enc.hprof.codec.vid=h264
ro.media.enc.hprof.vid.fps=30
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB860/profile/MotoMB860.rdf
ro.build.version.full=Blur_Version.0.37.23.MB860.BellMobility.en.CA
vmiku914 said:
Certain apps a opening up in a smaller resolution and not using the full screen when they used to open up in full screen. Also some apps that worked before are now force closing, this all happened after I copied the build.prop and edited it for use of a game.
Click to expand...
Click to collapse
This is a known (but sometimes frustrating) "Atrix issue".
If you read some of the market app comments, the Atrix has that issue with some apps.
"TV Listings" is an app off the top of my head that worked when the Atrix launched, and then went to the 2/3rds of the screen showing it. "Weatherbug" isn't as noticeably bad, but used to be better at using the full screen.
It's weird because this happened before the first Bell Update came out too.
Unfortunately or fortunately, (depending on how you look at it) it's more of an "Atrix Issue" than anything you did wrong...
that's a strange Atrix issue, one minute an app resolution is fine then the next it shrinks to the resolution of other devices.
hmmm could it be the high resolution screen? anyone try installing spare parts and switching off app compatibility mode? (this fixed the issue on a droid with a dpi mod and my tablet with old apps.) (if im totally off just ignore me)
turning off compatibility mode worked! Thank you!
anytime glad to here it worked!
MMORPG Order & Chaos Online HD v1.0.2 Apk Working On Evo3D & Some Android Devices
This should work on most Android device that have root,R/W access,s-off.ect
PLEASE NOTE THAT THIS GUIDE IS SHOWING YOU HOW TO GET THE OFFICIAL GAME DIRECTLY FROM MARKET
THE BENEFIT OF GETTING THE GAME THIS WAY INSTEAD OF THE HACK OR PATCH VERSION IS LISTED BELOW
1:The official version will allow you to make in-app purchase which can get you the nice items like experience stones which increase xp by 100%
2:You will be able to get the overpower super gears at later levels.
3:The Game just runs way smoother than the hack or patch version(NO LAG AT ALL)
4:You will be able to get the awesome future updates soon as they are available because of this method here
5:No crashes because it is the Official game directly from market.The crack/patch version is known for having Force Closes and Crashes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE:Things you will need are Build.Prop Editor or Root Explorer which is what i used,ChainFire 3D and of course your phone need to be rooted with s-off and Superuser access,you should do a nand backup from custom recovery just incase u messed up somewhere.
CONFIRM:Before we begin,uninstall the patch/hack version if you have it installed,You may also delete the the old game cache folder GloftMMHM if you want a clean installation and a low chance of any problems or if you are getting unable to download message.
STEP 1:EDITING BUILD.PROP
This is where you are going to edit your build.prop to make market think your device is one of the compatible device for O&C and by doing that you will be able to see and download the game from Market directly.The changes you will be making to your build.prop are listed below.Keep in mind I didn't find the second line ro.product.model.internal= on Evo3D build.prop,but that line didn't matter it seems.
Some device have identical lines listed more than once,like for example Evo3D have two ro.product.model lines,so you must edit both lines if u see it more than once .
Make the following edit to your build.prop to make the game appear in market and u should be able download & install it.
Build.Prop #1 FOR HTC DEVICES IF THIS BUILD.PROP WORK FOR YOU,THEN YOU DONT HAVE TO FOLLOW THE OTHER EXTENDED STEPS
ro.product.brand=sprint
ro.product.model=PG06100
ro.product.name=htc_speedy
ro.product.device=speedy
ro.product.board=speedy
After you made the above change to your prop and save & reboot.Check market to see if u can download and install Order & Chaos.If you are able to see it but dont see the option to install it,then reboot your device a second time.If you are still unable to install the game then you have to refer to the addition steps below.
Make the change below to your prop if the above method didnt work for you and you will have to follow the additional steps if you have to use the build.prop below
BUILD.PROP #2 FOR NON HTC DEVICES
ro.product.model=Optimus 2X
ro.product.model.internal=
ro.product.brand=lge
ro.product.name=lge_star
ro.product.device=p990
ro.product.board=p990
Thanks to mattijuana from Atrix forum for settings
If you are using Root explorer,open it up then navigate to system then Build.prop,long press on it then select open up in text editor,make sure its mount as R/W and then make the above changes ONLY please,if u dont your device can get stuck in bootloop like mine did cause i was rushing and didnt capitalize what needed to be or maybe i didnt put space.
If you are using Build.Prop Editor app it simplify the process a little.
After you make the changes to your build.prop and save it you will need to reboot your device for the changes to take effect.
STEP 2:BUYING & INSTALLING THE GAME DIRECTLY FROM MARKET
Open up market and search for Order and Chaos and you should see it and able to download and install it because market thinks your phone is Optimus 2X(If you are able to see it but cant download it you might need old Market v2.3.6).Buy it and then install it then launch it and download the remaining data,its about 600mb plus in size so a fast connection would be nice.After that the game will launch properly but mine got stuck at the loading screen mainly because its looking for a NIVIDIA chip because your device is imitating a phone that use that NIVIDIA chip.So now we have to spoof our Qualcomm chip,thats where ChainFire comes in.Thanks Malebolgia from Whispering Island Server and guild leader of FORGOTTEN a level 60 guild for the information on ChainFire.
STEP 3:SPOOFING YOUR DEVICE QUALCOMM CHIPS WITH CHAINFIRE 3D PRO(HACK VERSION WOULD NOT WORK)
IF YOUR DEVICE ALREADY HAVE A NVIDIA CHIP,THEN YOU CAN PROBABLY SKIP THIS STEP
YOU WILL NEED CHAINFIRE 3D PRO VERSION FROM MARKET.....(CRACKED VERSION MAY NOT WORK)....
You will need the ChainFire3D Pro version app from market and get the pro version so you can install your own driver and apply pro version features,The driver you will need is NVIDIA driver that you can find here http://www.megaupload.com/?d=4P9LEW7P or if this link is down or the file is deleted you will have to search for LibGLEMU_NVIDIA file in zip format on Google.
You will need to grant superuser access for ChainFire3D and when you first launch it you will need to install the CF3D(then if you Evo3D you may need to remove your battery to boot back up after installing CF3D driver if your device froze trying to reboot) that is already provided with the app then you will need to install the NVIDIA driver you downloaded and is on your SD card.For some reason when you install those two drivers on Evo3D your phone will not reboot unless you take the battery out after each driver installment then power on your device.
NOTE:
Some device don't lockup or freeze after installing CF3D & NIVIDA drivers and would require the battery to be remove to reboot,But my Evo3D does.
After you installed the require drivers and rebooted twice after each driver installment by taking out your battery cause it wouldnt reboot normaly after the drivers installment on Evo3D,Im not sure about other devices.Launch ChainFire then navigate to Pre-app OpenGL settings and select Order and Chaos app and apply the NIVDIA plugin thats on your SD card and then check HIDE CF3D ID and DUMP Shaders options.Then launch Order and Chaos app.It should now load up properly and you can create account or if u have one already sign in and create a character and join the Whisperin Island Server of America,the best sever in my opinion
STEP 4:YOU ARE DONE,NOW GO ENJOY THE GAME IF YOU FOLLOW THE STEPS ABOVE TO THE LETTER.
Getting in-app purchase to work require Market version 3.0.27 and above
Now you should have the game running fine if you follow the steps correctly and made a nand backup just for good measure.
Please Join The Whispering Island Server if you dont want to get Ganck by higher level players or you are unable to complete a quest because over 20 people is doing the same quest as you on the other crowded servers with lag issues.My Name is Kaizer a Lv60(Max) warrior and leader of legends guild with over 200 active members,Ask for invite to Legends guild on global chat within the game if you chose Whispering Island Server,hope you did.
This is how my HTC EVO 3D Build.prop look after editing.
ro.com.google.clientidbase=android-sprint-us
ro.com.google.clientidbase.yt=android-sprint-us
ro.com.google.clientidbase.am=android-sprint-us
ro.com.google.clientidbase.vs=android-sprint-us
ro.com.google.clientidbase.gmm=android-sprint-us
ro.com.google.clientidbase.ms=android-sprint-us
ro.phone.min_match=7
ro.product.model=Optimus 2X<-----EDITED LINE
ro.cdma.home.operator.alpha=sprint
gsm.sim.operator.alpha=sprint
gsm.operator.alpha=sprint
ro.cdma.home.operator.numeric=310120
gsm.sim.operator.numeric=310120
gsm.operator.numeric=310120
gsm.sim.operator.iso-country=us
gsm.operator.iso-country=us
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.taskid=193975
ro.aa.romver=1.11.651.3
ro.aa.maincid=SPCS_001
ro.aa.modelid=PG8610000
ro.aa.cidlist=SPCS_001
ro.aa.rid=146
ro.aa.customizationid=184167
ro.aa.project=Shooter
ro.aa.skulist=651
ro.product.brand=lge
ro.product.model=Optimus 2X<------EDITED LINE
ro.aa.mainsku=651
ro.com.google.clientidbase=android-sprint-us
ro.build.id=GRI40
ro.build.display.id=GRI40
ro.build.version.incremental=69941
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
ro.build.date=一 5月 23 22:21:14 CST 2011
ro.build.date.utc=1306160474
ro.build.type=user
ro.build.user=
ro.build.host=AA108
ro.build.tags=release-keys
ro.product.model=Optimus 2X<------EDITED LINE
ro.product.brand=lge<------EDITED LINE
ro.product.name=lge_star<------EDITED LINE
ro.product.device=p990<------EDITED LINE
ro.product.board=p990<------EDITED LINE
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=shooter
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.11.651.3 CL69941 release-keys
ro.build.description=1.11.651.3 CL69941 release-keys
ro.build.changelist=69941
ro.product.ua=
ro.build.fingerprint=sprint/htc_shooter/shooter:2.3.3/GRI40/69941:user/release-keys
ro.build.project=193975
ro.product.version=1.11.651.3
ro.build.languageremove=0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for mahimahi
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
#C2D
debug.composition.type = c2d
rild.libpath=/system/lib/libhtc_ril.so
# Default network type.
# 4 => CDMA mode preferred.
ro.telephony.default_network=4
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
persist.data_netmgrd_mtu=1472
#
wifi.interface=eth0
wifi.supplicant_scan_interval=15
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# Change to 32m, due to 2.3.3 GB already change to 32m
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100101000011 represent bt profile list
ro.bt.profiles = 4270403
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
#Welly_Fang
ro.htc.device.slot1 = NV
# Following property will be reference by Settings.
ro.product.processor = 1.2 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch QHD resolution
ro.product.main_camera = 5M * 2
ro.product.front_camera = 1.3M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
# For opensense sdk
ro.htc.common.version = 3.0.0.0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r3
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
ro.media.codec_priority_thumb=so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Sent from my Optimus 2X using XDA Premium App
Dude you're the effing bomb!! It worked it really worked. Definitely a thanks. I couldn't get it off the market so i had some searching for the apk. I think I'm really gonna love this game. My!? Is why doesn't gameloft port it over since as you can see it can run on our phones very well.
mrjaydee82 said:
Dude you're the effing bomb!! It worked it really worked. Definitely a thanks. I couldn't get it off the market so i had some searching for the apk. I think I'm really gonna love this game. My!? Is why doesn't gameloft port it over since as you can see it can run on our phones very well.
Click to expand...
Click to collapse
Glad I can help
Sent from my Optimus 2X using XDA Premium App
This game really heats up my phone big time, what is a safe temp you think for evo 3d? After a little playing it got up to 52 degrees celcius
mrjaydee82 said:
This game really heats up my phone big time, what is a safe temp you think for evo 3d? After a little playing it got up to 52 degrees celcius
Click to expand...
Click to collapse
Yeah it do hit extreme temperature mainly because data is constantly being transfer and if you are on a weak connection the harder the radio will have to work thus generating more heat and if u are playing while plug in and using the Evo3D charger which charges at a higher voltage the faster the phone temp will go up,mine goes way above 54c/110'F,but don't worry,the led should start blinking from Green/Orange repeatedly when the phone start to hit unsafe temperature,and when it do start to blink orange/green you might want to unplug the charger and/or you may need to pull the battery out for about about 2-5mins if you are concern about damaging your device by overheating it,but I just reboot and wait few minutes to start playing again cause I have a otter box case and pulling battery out is a pain.
Also try setting resolution for the game to 16bit from ChainFire3D settings it will reduce memory use and help with battery heat because the chips are drawing less power,and you wouldn't even notice the difference in 32bit and 16bit.And u can also mess around with SetCpu or whatever to lower your CPU speed under 1ghz.Or if you are home and on wifi,turn off mobile data/3G u will still be able to get txt and calls dont worry.Those settings seems to keep temps down a little bit.
Sent from my Optimus 2X using XDA Premium App
Okay thanks
Thank you ever so much... I've been waiting on this for a minute...
ourprisonplanet said:
Thank you ever so much... I've been waiting on this for a minute...
Click to expand...
Click to collapse
You are welcome sir
4g for htc evo would look like this?
ro.product.model = Optimus 2X
= ro.product.model.internal
ro.product.brand = LGE
ro.product.name = lge_star
ro.product.device = P990
ro.product.board = P990
BUILD_DISPLAY_ID=4.24.651.1
dalvik.vm.dexopt-flags=m
dalvik.vm.heapsize=48m
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
gsm.operator.alpha=Sprint
gsm.operator.iso-country=us
gsm.operator.numeric=310120
gsm.sim.operator.alpha=Sprint
gsm.sim.operator.iso-country=us
gsm.sim.operator.numeric=310120
htc.audio.alt.enable=1
htc.audio.hac.enable=1
keydispatchtimeout=15000
keyguard.no_require_sim=1
media.a1026.nsForVoiceRec=0
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-scan=true
net.bt.name=Android
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.sys.shutdown.mode=hibernate
postprocess.denoise_level=5
postprocess.iso_midband=400
rild.libpath=/system/lib/libhtc_ril.so
ring.delay=0
ro.aa.cidlist=SPCS_001
ro.aa.customizationid=177316
ro.aa.maincid=SPCS_001
ro.aa.mainsku=651
ro.aa.modelid=PC3610000
ro.aa.project=SuperSonic_GB
ro.aa.rid=62
ro.aa.romver=4.24.651.1
ro.aa.skulist=651
ro.aa.taskid=193963
ro.board.platform=qsd8k
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.profiles=4270339
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.build.date=一 5月 23 22:29:13 CST 2011
ro.build.date.utc=1306160953
ro.build.description=Ginger-AleV5 ro.build.changelist
ro.build.display.id=GRI40
ro.build.fingerprint=sprint/htc_supersonic/supersonic:2.3.3/GRI40/61076:user/release-keys
ro.build.host=AA135
ro.build.id=GRI40
ro.build.product=supersonic
ro.build.project=198504
ro.build.tags=release-keys
ro.build.type=user
ro.build.user=root
ro.build.version.codename=REL
ro.build.version.incremental=60865
ro.build.version.release=2.3.3
ro.build.version.sdk=10
ro.cdma.home.operator.alpha=Sprint
ro.cdma.home.operator.numeric=310120
ro.com.android.dataroaming=true
ro.com.google.clientidbase=android-sprint-us
ro.com.google.clientidbase.am=android-sprint-us
ro.com.google.clientidbase.gmm=android-sprint-us
ro.com.google.clientidbase.ms=android-sprint-us
ro.com.google.clientidbase.vs=android-sprint-us
ro.com.google.clientidbase.yt=android-sprint-us
ro.com.google.gmsversion=2.3_r2
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.ringtone=RingRing.mp3
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.common.version=2.1.0.0
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
ro.media.dec.aud.wma.enabled=1
ro.media.dec.jpeg.memcap=20000000
ro.media.dec.vid.wmv.enabled=1
ro.media.enc.aud.amrnb.bps=5525,12200
ro.media.enc.aud.amrnb.ch=1,1
ro.media.enc.aud.amrnb.hz=8000,8000
ro.media.enc.aud.codec=amrnb
ro.media.enc.file.format=3gp,mp4
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.duration=60
ro.media.enc.hprof.file.format=mp4
ro.media.enc.hprof.vid.bps=2000000
ro.media.enc.hprof.vid.fps=24
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.width=720
ro.media.enc.jpeg.quality=95,85,70
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.codec.vid=m4v
ro.media.enc.lprof.duration=30
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.vid.bps=256000
ro.media.enc.lprof.vid.fps=15
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.width=176
ro.media.enc.vid.codec=m4v,h263,h264
ro.media.enc.vid.h263.bps=64000,6000000
ro.media.enc.vid.h263.fps=1,30
ro.media.enc.vid.h263.height=144,720
ro.media.enc.vid.h263.width=176,1280
ro.media.enc.vid.h264.bps=64000,6000000
ro.media.enc.vid.h264.fps=1,30
ro.media.enc.vid.h264.height=144,480
ro.media.enc.vid.h264.width=176,800
ro.media.enc.vid.m4v.bps=64000,8000000
ro.media.enc.vid.m4v.fps=1,30
ro.media.enc.vid.m4v.height=144,720
ro.media.enc.vid.m4v.width=176,1280
ro.opengles.version=131072
ro.product.bluetooth=2.1 + EDR
ro.product.board=supersonic
ro.product.brand=sprint
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.device=supersonic
ro.product.display_resolution=4.3 inch WVGA resolution
ro.product.front_camera=1.3M
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.product.main_camera=8M
ro.product.manufacturer=HTC
ro.product.model=PC36100
ro.product.name=htc_supersonic
ro.product.processor=1GHz
ro.product.ram=512MB
ro.product.ua=
ro.product.version=AvA-Modified
ro.product.wifi=802.11 b/g/n
ro.ril.def.agps.mode=2
ro.ril.def.preferred.network=4
ro.ril.set.mtu1472=1
ro.setupwizard.enterprise_mode=1
ro.setupwizard.mode=DISABLED
ro.sf.hw=1
ro.sf.lcd_density=240
ro.telephony.call_ring.delay=0
ro.telephony.default_network=4
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.wifi.channels=
service.brcm.bt.activation=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.btld_pid=0
service.brcm.bt.hcid_active=0
service.brcm.bt.srv_active=0
service.brcm_bt.btld=0
settings.display.autobacklight=1
settings.display.brightness=143
watchdogtimeout=120000
wifi.interface=etho
wifi.supplicant_scan_interval=30
windowsmgr.max_events_per_sec=100
windowsmgr.support_rotation_270=true
ro.config.ringtone=Windchimer.mp3
Thanks
I would totally put chainfire on my nook color, but your instructions kind of scare me since we cannot remove the battery.. and your advice was right about putting the new market back on, I could buy runes and such afterwards. Unfortunately it can't see the game anymore, but since I could buy it legit I don't mind.
Btw, I am in your guild. Good write up btw.
Edit: No problems with chainfire(must be your phones), and a notable amount of smoothness since I did it. Good idea.
Silentbtdeadly said:
I would totally put chainfire on my nook color, but your instructions kind of scare me since we cannot remove the battery.. and your advice was right about putting the new market back on, I could buy runes and such afterwards. Unfortunately it can't see the game anymore, but since I could buy it legit I don't mind.
Btw, I am in your guild. Good write up btw.
Edit: No problems with chainfire(must be your phones), and a notable amount of smoothness since I did it. Good idea.
Click to expand...
Click to collapse
Did you try the option in ChainFire3D that says Fix Market Settings to see if u can see it again in the new Market?
I'd love to give this a go, but I can't get past step 2. I downloaded the new version from the market, with my modded build.prop, but when I go to run it, and download content, it says, "an error has occurred with the download, would you like to restart it? " or something to that effect, click yes, and the same message comes back up. Over, and over. I've posted on the gameloft forum, but no help over there. Hopefully, someone will have answers or help here. Thanks for reading.
Veedubklown said:
I'd love to give this a go, but I can't get past step 2. I downloaded the new version from the market, with my modded build.prop, but when I go to run it, and download content, it says, "an error has occurred with the download, would you like to restart it? " or something to that effect, click yes, and the same message comes back up. Over, and over. I've posted on the gameloft forum, but no help over there. Hopefully, someone will have answers or help here. Thanks for reading.
Click to expand...
Click to collapse
Try using a different connection or uninstall game reboot then reinstall,if that don't work,you may need to find and download the remaining game cache off the internet which is about 650MB+ and I'm not sure if the game Cache off another device may work on Evo3D,but if u look hard you might find the Optimus 2X or GX2,that's the device our phone is imitating ,You can then place it in the gameloft/games/GloftMMHM folder on your SD card,then reinstall the game from market,that might probably work because the game would only require about 160+MB more to complete.If that doesn't work,refer to method 2 below.
so here is what I want you to try.
step 1:
Uninstall the Order & Chaos you downloaded from Market and download & install the one from the link I PM/sent you cause I can't post it here.
Step 2:
Launch the one you downloaded from my link and see if it will download the remaining game from Gameloft severs.
Step 3:
If you were able to complete the download,leave the game and then uninstall Order & Chaos again then reinstall the one from Market it should just require about 165+MB more to complete this time around because its a newer version of the game.
Let me know how it goes.
will it work with this asus eee pad code?
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37.WW_epad-8.4.4.11-20110711
ro.build.version.incremental=WW_epad-8.4.4.11-20110711
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Mon Jul 11 14:47:25 CST 2011
ro.build.date.utc=1310366845
ro.build.type=user
ro.build.user=
ro.build.host=Mercury
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=EeePad
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=WW_epad-user 3.1 HMJ37 WW_epad-8.4.4.11-20110711 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:3.1/HMJ37/WW_epad-8.4.4.11-20110711:user/release-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
rild.libpath=/system/lib/libmbm-ril.so
rild.libargs=-d /dev/ttyACM0 -i wwan0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V5.1.50
bt.version.driver=V6.17
gps.version.driver=V1.3.2
keyguard.no_require_sim=true
drm.service.enabled=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=3.1_pre-r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.wifi.country=US
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
farr3ll said:
will it work with this asus eee pad code?
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37.WW_epad-8.4.4.11-20110711
ro.build.version.incremental=WW_epad-8.4.4.11-20110711
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Mon Jul 11 14:47:25 CST 2011
ro.build.date.utc=1310366845
ro.build.type=user
ro.build.user=
ro.build.host=Mercury
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=EeePad
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=WW_epad-user 3.1 HMJ37 WW_epad-8.4.4.11-20110711 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:3.1/HMJ37/WW_epad-8.4.4.11-20110711:user/release-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
rild.libpath=/system/lib/libmbm-ril.so
rild.libargs=-d /dev/ttyACM0 -i wwan0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V5.1.50
bt.version.driver=V6.17
gps.version.driver=V1.3.2
keyguard.no_require_sim=true
drm.service.enabled=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=3.1_pre-r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.wifi.country=US
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
If you your Tab is rooted with R/W and you are able to edit the corresponding Build.Prop settings in first post,then yes it might work,because our phone is able to imitate Tabs too & vice versa.But keep in mind you will be installing a phone version of the game and it might not look full screen on you pad,I'm not sure.
still reads as incompatible at market
Lord_Kaizer said:
If you your Tab is rooted with R/W and you are able to edit the corresponding Build.Prop settings in first post,then yes it might work,because our phone is able to imitate Tabs too & vice versa.But keep in mind you will be installing a phone version of the game and it might not look full screen on you pad,I'm not sure.
Click to expand...
Click to collapse
Unless you have found anything different, there doesn't appear to be a "phone" version and tablet version, nothing I have found suggests the way the game renders, the sd card contents, or changing the build.prop has changed those things. Since I am using a pad, I would like to be able to test this, but when I put the galaxy tab settings in my build.prop nothing was any different than before.
I am very curious though.
farr3ll said:
still reads as incompatible at market
Click to expand...
Click to collapse
Did you reboot after changing your build.prop? The changes won't take effect until you do, and this method is verified as working.
I have a totally different device, but the method that worked for me to be ABLE to see/download it in the market, I had to be using the OLD style market(the newer one is more device aware).. then to be able to buy game time in game I had to install the new market(grey/black style).
farr3ll said:
still reads as incompatible at market
Click to expand...
Click to collapse
At which point do it say incompatible,anwser the following questions
1: Are you using a custom rom?
I'm using stock
2: Did you have the patch/hack version installed before this?
if u did,u may have to delete the old cache folder GloftMMHM from the gameloft folder on your SD and start fresh
3: were u able to see the game in market
and download & install,but then got incompatible when u launch the game?
if that happen,did you install the NVIDIA driver and check hide CF3D options.
2: Did the game load up normal after installing or did the incompatible message pop up?
If so,please check the build.prop changes and comepare it line by line to mine in the second post.And check the steps again please.
yeah, it should work for any device. thank you so much kaizer. it worked for me on evo3d. now i can play.
Stock LG build KOT49I.V50020b US + BusyBox + Root
for LG G Pad 8.3 V500 ONLY!
Android 4.4.2 Kit Kat :victory:
Disclaimer:
Use this at your own risk. I have personally flashed and tested this build on my own device successfully.
I am not responsible for any damage or data loss encountered due to whatever reason.
Please ensure that you make a full backup of your system before flashing anything.
Features:
Official Stock 4.4.2 LG build KOT49I.V50020b US + Stock 4.4.2 Kernel
NO Data Wipe
Doesn't flash over existing Recovery or ABOOT (you keep TWRP and retain loki-exploit)
SuperSU 1.94 + su binary Installed
BusyBox 1.22.1-Stericson Installed
Wipes Dalvik-Cache and Cache partition
External SD R\W fix
Downloads:
LG-V500_KOT49I.V50020B_US_Stock-BB-Rooted.zip (hosted on AndroidFileHost) **NEW**
Mirrors:
LG-V500_KOT49I.V50020B_US_Stock-BB-Rooted.zip (hosted on Copy.com)
md5:
c6016a8e387e3d3983a75532d4963c00
KDZ file for those that want to Flash using that method
(these are unmodified KDZ files, so they are not rooted):
V50020b_00.kdz (From Official LG Servers)
Prerequisites:
TWRP 2.7.0.0 Installed and working (not tested on CWM recovery)
FULL nandroid Backup
At least 3GB free space on internal memory (not including ZIP file)
Install:
Boot into TWRP recovery.
*** Make a Full backup before proceeding. ***
Flash .zip file in TWRP recovery.
Go take a walk, make some coffee, pace around nervously. Keep Calm... this will take a while! Be patient!!
Flash TWRP 2.7.0.1 for 4.4.2 in recovery (if not already installed)
Reboot device.
Enjoy!!
Many Thanks to
@autoprime - for 4.4.2 initial root method
@Drgravy - for TWRP for V500
@Chainfire - for SuperSU and install script
@jazzruby - BusyBox install script
my precious...2nd post.
Original build.prop from release (unmodified)
Code:
Known Issues & Fixes:
Boot loop when booting into TWRP with USB plugged in
FIX: Install TWRP 2.7.0.1 for 4.4.2, this fixes bootloop while USB plugged in, and also fixes screen dimming issue.
Workaround: If running TWRP 2.7.0.0 for 4.2.2 - Unplug USB after device reboots. It should boot into Recovery without issue. Replug USB after TWRP has booted.
Click to expand...
Click to collapse
Can you make an EU version too?
Sent from my LG-V500 using Tapatalk
Do we only have to change the build.prop (like in previous version) to make it the eu version?
nsmart said:
Do we only have to change the build.prop (like in previous version) to make it the eu version?
Click to expand...
Click to collapse
Not sure if that's the only change.. However I do have the official KDZ for GB (which hasn't been released yet) as well.. Can look into it tomorrow. In the mean time I can post the unmodified build prop from that build.
build.prop on this one is wierd..
Locale is set to US and English by default:
ro.product.locale.language=en
ro.product.locale.region=US
Yet target country is SCA
ro.build.target_country=SCA
ro.build.target_region=SCA
Anyways, for those waiting. Upload failed halfway through and had to restart it.. Going to bed now and leaving it uploading..
It will appear in this folder when it's finished. I'll update the OP in the morning.
http://www.androidfilehost.com/?w=files&flid=13555
Is that bug present when rebooting to recovery while device is plugged into USB port?
Downloading now, I see the file is ready...
id10terror said:
build.prop on this one is wierd..
Locale is set to US and English by default:
ro.product.locale.language=en
ro.product.locale.region=US
Yet target country is SCA
ro.build.target_country=SCA
ro.build.target_region=SCA
Anyways, for those waiting. Upload failed halfway through and had to restart it.. Going to bed now and leaving it uploading..
It will appear in this folder when it's finished. I'll update the OP in the morning.
http://www.androidfilehost.com/?w=files&flid=13555
Click to expand...
Click to collapse
So how certain are you that this is really the US KK if the build.prop says otherwise?
You are the man! Downloading now
Sent from my LG-V500 using Tapatalk
First of all, many thanks for the quick work. It installed smoothly and without a hitch. At first view, it is all working fine.
After installing, it did display English (US) as the primary language, though the Keyboard layout was strangely in Portuguese by default. The LG Apps are all good except one: QVoice is missing.
Another sign this is not the real US version is the QRemote. The US Qremote usually has TV and Cable Box. This one has the European defaults TV+DVD+Blu-ray.
That said, the version is unquestionably KitKat, but my initial suspicion is that this is a doctored European version, hence the lack of English language QVoice, and the above details.
id10terror said:
Not sure if that's the only change.. However I do have the official KDZ for GB (which hasn't been released yet) as well.. Can look into it tomorrow. In the mean time I can post the unmodified build prop from that build.
Click to expand...
Click to collapse
So to be clear is this in fact the official US version or is a modified European one with a US build.prop file?
I ask because qvoice and the Qremote are 2 features I do like on 4.2.2 and am wondering based on what I am reading here, if they will work or exist in this version?
Working great, thank you again
Canadoc said:
So to be clear is this in fact the official US version or is a modified European one with a US build.prop file?
I ask because qvoice and the Qremote are 2 features I do like on 4.2.2 and am wondering based on what I am reading here, if they will work or exist in this version?
Click to expand...
Click to collapse
There is no Qvoice at all, and it is not listed in the LG Apps available for download.
Qremote works on my LG TV here in Brazil, just as the original US Qremote did, so no issues, but there is no cable box option (I never used it anyhow). I have an LG G2 phone, and the monster selection of equipment and brands it covers has always made it a more attractive choice for Qremote to me anyhow.
But that is just it, the cable box option is in the US firmware. It is not in the European firmware. Q voice also is in the current firmware 4.2 .2 US version
Sent from my LG-V500 using Tapatalk
Subtleone said:
So how certain are you that this is really the US KK if the build.prop says otherwise?
Click to expand...
Click to collapse
Subtleone said:
First of all, many thanks for the quick work. It installed smoothly and without a hitch. At first view, it is all working fine.
After installing, it did display English (US) as the primary language, though the Keyboard layout was strangely in Portuguese by default. The LG Apps are all good except one: QVoice is missing.
Another sign this is not the real US version is the QRemote. The US Qremote usually has TV and Cable Box. This one has the European defaults TV+DVD+Blu-ray.
That said, the version is unquestionably KitKat, but my initial suspicion is that this is a doctored European version, hence the lack of English language QVoice, and the above details.
Click to expand...
Click to collapse
Canadoc said:
So to be clear is this in fact the official US version or is a modified European one with a US build.prop file?
I ask because qvoice and the Qremote are 2 features I do like on 4.2.2 and am wondering based on what I am reading here, if they will work or exist in this version?
Click to expand...
Click to collapse
Subtleone said:
There is no Qvoice at all, and it is not listed in the LG Apps available for download.
Qremote works on my LG TV here in Brazil, just as the original US Qremote did, so no issues, but there is no cable box option (I never used it anyhow). I have an LG G2 phone, and the monster selection of equipment and brands it covers has always made it a more attractive choice for Qremote to me anyhow.
Click to expand...
Click to collapse
Canadoc said:
But that is just it, the cable box option is in the US firmware. It is not in the European firmware. Q voice also is in the current firmware 4.2 .2 US version
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
You are all correct, this indeed does not look like the Official US build or at least not the final one. Strange thing is I did infact download this directly from LG servers and left the build.prop untouched (just as it appears on the second post.) I have removed "US" from the title and post since we are unsure what this version really is.
Also, I've added a mirror in the OP and links to the KDZ file this is based off of.
Here's the build.prop from the other unreleased KDZ I have.. Looks like Official GB\UK version.
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49I.V50020a
ro.build.display.id=KOT49I.V50020a
ro.build.version.incremental=.1395552766
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Sun Mar 23 14:36:17 KST 2014
ro.build.date.utc=1395552977
ro.build.type=user
ro.build.user=patrickym.kim
ro.build.host=vegita119
ro.build.tags=release-keys
ro.product.model=LG-V500
ro.product.brand=lge
ro.product.name=awifi_open_eu
ro.product.device=awifi
ro.product.board=AWIFI
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=11
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=awifi
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=awifi_open_eu-user 4.4.2 KOT49I.V50020a .1395552766 release-keys
ro.build.fingerprint=lge/awifi_open_eu/awifi:4.4.2/KOT49I.V50020a/.1395552766:user/release-keys
ro.build.characteristics=tablet
# end build properties
#
# from device/lge/awifi/system.prop
#
################################################################
# COMMON system property for this device (geefhd).
# operator-specific property MUST NOT be here.
################################################################
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=1
ro.hdmi.enable=true
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
#mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# System prop to disable a2dp sink which is enabled by default
bluetooth.a2dp.sink.enabled=false
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
#LGE_CHANGE_S 2013.01.31 QCT CABL OFF
ro.qualcomm.cabl=2
#LGE_CHANGE_S 2013.01.31 QCT CABL OFF
# System props for telephony
# System prop to turn on CdmaLTEPhone always
# [email protected] awifi do not use lte telephony feature
#telephony.lteOnCdmaDevice=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
# LGE_CHANGE_S
# If you use Internal-SD with FUSE, comment-out below
# 2012-01-08 [email protected]
#persist.fuse_sdcard=false
# LGE_CHANGE_E
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
# LGE_CHANGE_S [email protected] 2012.4.22 LGE sound profile scenario.
ro.lge.audio_soundprofile=true
# LGE_CHANGE_E [email protected] 2012.4.22 LGE sound profile scenario.
#LGBT_COMMON_SCENARIO supported Bluetooth PAN profile 2012-05-22
ro.bluetooth.PANenable = 1
#LGBT_COMMON_SCENARIO
# System prop for sensor
ro.qc.sdk.sensors.gestures=true
# LGE_CHANGE_S 2012-12-11, [email protected], HDMI block
sys.hdmi.block=unblock
# LGE_CHANGE_E 2012-12-11, [email protected], HDMI block
# Increase texture cache size for FHD models (24MB -> 32MB)
ro.hwui.texture_cache_size=32
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
# LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up
# reserved wifi related property
dhcp.ap.macaddress=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
dhcp.wlan0.vendorInfo=
dhcp.p2p.dns1=
dhcp.p2p.dns2=
dhcp.p2p.dns3=
dhcp.p2p.dns4=
dhcp.p2p.gateway=
dhcp.p2p.ipaddress=
dhcp.p2p.leasetime=
dhcp.p2p.mask=
dhcp.p2p.pid=
dhcp.p2p.reason=
dhcp.p2p.result=
dhcp.p2p.server=
dhcp.p2p.vendorInfo=
init.svc.dhcpcd_wlan0=
init.svc.dhcpcd_p2p=
init.svc.p2p_supplicant=
init.svc.iprenew_wlan0=
net.dns1=
net.dns2=
net.dnschange=
net.p2p-p2p0-0.dns1=
net.p2p-p2p0-0.dns2=
net.wlan0.dns1=
net.wlan0.dns2=
wlan.driver.status=
persist.sys.security=
persist.sys.hotssid.ksc5601=
wifi.lge.autochannel=
# LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up
# LGE_CHANGE_S 2013-05-21 [email protected], Support modem
persist.lge.modem.support=false
# LGE_CHANGE_E 2013-02-19 [email protected], Support modem
#disable gapless mode by default
audio.gapless.playback.disable=true
# LGE_CHANGE_S [awifi][framework][common] the screen auto-brightness adjustment setting
persist.power.useautobrightadj=true
# LGE_CHANGE_E [awifi][framework][common] the screen auto-brightness adjustment setting
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.target_operator=OPEN
ro.build.target_country=EU
ro.build.target_region=EU
ro.3lm.build.lg=false
ro.lge.basebandversion=M9615A-CEFWTAZM-4.0.10353
tangible_device_config=T1BCNAOTDO
ro.lge.swversion=V50020a
ro.lge.factoryversion=LGV500AT-00-V20a-EUR-XX-MAR-23-2014+0
ro.config.ringtone=00_Lifes_Good.ogg
ro.config.notification_sound=Lifes_Good_Noti.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.camera.sound.forced=1
keyguard.no_require_sim=true
ime_feature_0=vibration_pattern:0:25;keyboard_layout:ko=QWERTY
ro.lge.lcd_default_brightness=164
ro.lge.lcd_auto_brightness_mode=false
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
wifi.supplicant_scan_interval=20
wifi.lge.patch=true
wifi.lge.sleeppolicy=0
wifi.lge.offdelay=false
wifi.lge.hanglessid=true
wifi.lge.ftm_test=1
wlan.lge.supportsimaka=NO
wlan.lge.wifidisplay=both
dhcp.dlna.using=false
ro.tether.denied=true
wlan.chip.vendor=qcom
wlan.lge.concurrency=MCC
wlan.chip.version=wcnss
wifi.lge.supportp2p5g=gconly
drm.service.enabled=true
lge.signed_image=true
persist.sys.strictmode.disable=true
wlan.driver.ath=0
wlan.driver.config=/data/misc/wifi/WCNSS_qcom_cfg.ini
qcom.audio.init=complete
lpa.decode=true
persist.sys.ats_start=false
persist.sys.strictmode.visual=false
lgemm.player.use_android_origin=false
ro.lge.audio_scenario=SOUNDEXCEPTION
ro.lge.audio_soundexception=true
ro.config.vc_call_vol_steps=6
ro.config.vc_call_vol_default=3
ro.airplane.phoneapp=1
ro.lge.overlay=false
lge.version.verified=NONE
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
persist.service.kernel.enable=0
persist.service.packet.enable=0
persist.service.crash.enable=0
persist.sys.ssr.restart_level=3
persist.radio.data_no_toggle=1
ro.carrier=unknown
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.lge.ps.eco.pv=322
ro.lge.ps.freqlowlimit=1026000
lge.hw.frontkeyled=false
lge.normalizer.param=version2.0/true/13.5/true/8230/1.0/2050/0.55
bluetooth.chip.vendor=qcom
bluetooth.pan=true
persist.service.btui.use_aptx=1
ro.sdcrypto.syscall=378
ro.lge.b2b.vmware=true
service.knockcode.touchfw=0
ro.lge.capp_ZDi_O=true
lge.zdi.actionsend=false
lge.zdi.onactivityresult=true
lge.zdi.dragdropintent=false
ro.lge.capp_almond=true
ro.lge.capp_wfd=true
ro.lge.qslide.max_window=2
ro.lge.irrc.type=sw
ro.com.google.clientidbase=android-om-lge
ro.com.google.clientidbase.ms=android-om-lge
ro.com.google.clientidbase.am=android-om-lge
ro.com.google.clientidbase.gmm=android-om-lge
ro.com.google.clientidbase.yt=android-om-lge
ro.com.google.gmsversion=4.4.2_r1
ro.setupwizard.mode=DISABLED
ro.livewallpaper.map=DISABLED
ro.com.google.apphider=on
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
Do any of the versions that you have access to have the quick voice app? I tried to install the 4.2 .2 version into system and fix permissions. And even after a reboot they do not appear to show up.
Also one other interesting things, is that the Q remote app does not show cable box as an option, so it is acting more like the non American version. However what is interesting was I previously had a remote setup including the cable set top box for my home TV. Ironically even though I cannot set up a new cable box, the previously set up when I have remained and is functional. This leads me to believe that there must be a setting somewhere that can be changed that with open up access to more devices on our Q remote app
Sent from my LG-V500 using Tapatalk
Canadoc said:
Do any of the versions that you have access to have the quick voice app? I tried to install the 4.2 .2 version into system and fix permissions. And even after a reboot they do not appear to show up.
Also one other interesting things, is that the Q remote app does not show cable box as an option, so it is acting more like the non American version. However what is interesting was I previously had a remote setup including the cable set top box for my home TV. Ironically even though I cannot set up a new cable box, the previously set up when I have remained and is functional. This leads me to believe that there must be a setting somewhere that can be changed that with open up access to more devices on our Q remote app
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Seriously, did you not read the 16 posts on this brand new thread
-VZW LG G2 VS980
Canadoc said:
Do any of the versions that you have access to have the quick voice app? I tried to install the 4.2 .2 version into system and fix permissions. And even after a reboot they do not appear to show up.
Also one other interesting things, is that the Q remote app does not show cable box as an option, so it is acting more like the non American version. However what is interesting was I previously had a remote setup including the cable set top box for my home TV. Ironically even though I cannot set up a new cable box, the previously set up when I have remained and is functional. This leads me to believe that there must be a setting somewhere that can be changed that with open up access to more devices on our Q remote app
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
I just flashed the GB version and it has a working QVoice.. I'm going to post a Flashable zip of the GB EU version as well.. then we can look to see if a simple build.prop change can give you the US version of Q Remote, which has Cable Box option.
Any one feel difference between this build and the previus (50018) ?
P.S And yeah i am new on tablet flash world i use to flash my phones but for tablet i don't know a damn thing how to flash so if someone can be generous to tell me the installition steps
Hi , i wanna root my nextbook 8 but i can't know how to do that if u can help me with that i really with be thanksfully even better if is any way to find me a rom for this tablet my tablet information are :
Model Number : nx008hi
buld.prop :
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.v008
ro.build.version.incremental=eng.root.20130321.205 658
ro.build.version.sdk=16
ro.build.version.codename=JellyBean
ro.build.version.release=4.1.1
ro.build.date=Thu Mar 21 20:57:33 CST 2013
ro.build.date.utc=1363870653
ro.build.type=user
ro.build.user=root
ro.build.host=midcs-desktop
ro.build.tags=release-keys
ro.product.board=NXM909NP
ro.product.model=NX008HI
ro.product.brand=Nextbook
ro.product.name=NX008HI
ro.product.device=NX008HI
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=YIFANG
ro.wifi.channels=14
ro.board.platform=meson6
# ro.build.product is obsolete; use ro.product.device
ro.build.product=NXM909NP
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=NXM909NP-user 4.1.1 JRO03C eng.root.20130321.205658 release-keys
ro.build.fingerprint=Nextbook/M909NP/M909NP:4.1.1/JRO03C/v008:user/release-keys
ro.build.characteristics=tablet
# end build properties
# system.prop for M1 reference board
# This overrides settings in the products/generic/system.prop file
#
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=160
keyguard.no_require_sim=1
#set keyguard.enable=false to disable keyguard
keyguard.enable=true
ro.statusbar.widget=true
ro.statusbar.button=true
ro.statusbar.yearmonthdayweek=true
#wifi.interface=ra0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
#wifi.supplicant_scan_interval = 60
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
#configure the Dalvik heap for a standard tablet device.
#frameworks/base/build/tablet-dalvik-heap.mk
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
hwui.render_dirty_regions=false
# Disable un-supported Android feature
hw.nopm=false
hw.nobattery=false
hw.nophone=false
hw.novibrate=true
hw.cameras=2
hw.hasethernet=false
#hw.hasdata=true
ro.platform.has.touch=true
# Wi-Fi sleep policy
ro.platform.has.sleeppolicy=false
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=270
#0~7 You are required to get the correct install direction according the sensor placement on target board
ro.sf.gsensorposition=6
ro.sf.Gconvert_x_y=0
ro.sf.Gconvert_x=1
ro.sf.Gconvert_y=1
ro.sf.Gconvert_z=1
ro.sf.ecompassposition=4
allow_all_orientations=1
# Set Camera Orientation
# Use OSD2 mouse patch
ro.ui.cursor=osd2
ro.hardware=amlogic
# Enable 32-bit OSD
sys.fb.bits=32
# Disable GPS
gps.enable=false
# Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-acodecs=asf,aac,ape,flac,alac
media.amplayer.enable=true
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
#media.amplayer.widevineenable=true
media.arm.audio.decoder=ape,aac
# Nand write need force sync when gadget
gadget.nand.force_sync=true
# Status bar customization
ro.statusbar.widget.power=true
yf.show.compat=false
ro.statusbar.yearmonthdayweek=true
# HDMI
ro.hdmi480p.enable=false
#rw.fb.need2xscale=ok
#media.amplayer.osd2xenable=true
#camera DCIM dir. 0:sd only; 1:nand only; 2,sd first
ro.camera.dcim=1
ro.camera.lockorientation=false
# Disable preload-class
ro.amlogic.no.preloadclass=0
# App optimization
ro.app.optimization=true
#Dual display
ro.vout.dualdisplay3=true
ro.vout.player.exit=false
# CPU settings
ro.has.cpu.setting=true
# CPU freq customized in setting menu
# normal, performance, powersaving
ro.cpumode.maxfreq=1200000,1320000,800000
# when usbstorage, CPU mode and freq
ro.usbstorage.cpumode=performance
ro.usbstorage.maxfreq=600000
ro.yifang.devicename=NX008HI
ro.yifang.hotpoint=0
ro.bootanimation.rotation=90
ro.keyguard.orientation=landscape
ro.yifang.weather.city=New York
ro.yifang.weather.isf=1
ro.yifang.ota.enable=1
#support media poll uevent,can use sd cardread on usb port
has.media.poll=false
ro.dongle.change.local=0
ro.yifang.locationsetting=1
#used forward seek for libplayer
media.libplayer.seek.fwdsearch=1
#enable address bar cover issue fixing
ro.flashplayer.surfacehack=1
ro.media.partition.label=Nextbook
ro.yifang.hotpoint=0
#ro.usb.vendor.string=Yifang
#ro.usb.product.string=PMP5580C
hw.erase.internalSdcard=true
ro.screen.has.usbstorage=true
virtualsd.enable=true
ro.yifang.bluetooth=0
ro.yifang.mobile=1
ro.yifang.mobile_dongle=0
ro.yifang.datausagesetting=1
ro.product.mobilenetwork = 0
ro.yifang.default.timeout=-1
ro.yifang.default.brightness=196
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.carrier=unknown
ro.opengles.version=131072
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.hardware.version=1.0.0.0
ro.vendor.name=YFMID
P.S And yeah i am new on tablet flash world i use to flash my phones but for tablet i don't know a damn thing how to flash so if someone can be generous to tell me the installition steps
Hi , i wanna root my nextbook 8 but i can't know how to do that if u can help me with that i really with be thanksfully even better if is any way to find me a rom for this tablet my tablet information are :
Model Number : nx008hi
buld.prop :
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.v008
ro.build.version.incremental=eng.root.20130321.205 658
ro.build.version.sdk=16
ro.build.version.codename=JellyBean
ro.build.version.release=4.1.1
ro.build.date=Thu Mar 21 20:57:33 CST 2013
ro.build.date.utc=1363870653
ro.build.type=user
ro.build.user=root
ro.build.host=midcs-desktop
ro.build.tags=release-keys
ro.product.board=NXM909NP
ro.product.model=NX008HI
ro.product.brand=Nextbook
ro.product.name=NX008HI
ro.product.device=NX008HI
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=YIFANG
ro.wifi.channels=14
ro.board.platform=meson6
# ro.build.product is obsolete; use ro.product.device
ro.build.product=NXM909NP
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=NXM909NP-user 4.1.1 JRO03C eng.root.20130321.205658 release-keys
ro.build.fingerprint=Nextbook/M909NP/M909NP:4.1.1/JRO03C/v008:user/release-keys
ro.build.characteristics=tablet
# end build properties
# system.prop for M1 reference board
# This overrides settings in the products/generic/system.prop file
#
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=160
keyguard.no_require_sim=1
#set keyguard.enable=false to disable keyguard
keyguard.enable=true
ro.statusbar.widget=true
ro.statusbar.button=true
ro.statusbar.yearmonthdayweek=true
#wifi.interface=ra0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
#wifi.supplicant_scan_interval = 60
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
#configure the Dalvik heap for a standard tablet device.
#frameworks/base/build/tablet-dalvik-heap.mk
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
hwui.render_dirty_regions=false
# Disable un-supported Android feature
hw.nopm=false
hw.nobattery=false
hw.nophone=false
hw.novibrate=true
hw.cameras=2
hw.hasethernet=false
#hw.hasdata=true
ro.platform.has.touch=true
# Wi-Fi sleep policy
ro.platform.has.sleeppolicy=false
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=270
#0~7 You are required to get the correct install direction according the sensor placement on target board
ro.sf.gsensorposition=6
ro.sf.Gconvert_x_y=0
ro.sf.Gconvert_x=1
ro.sf.Gconvert_y=1
ro.sf.Gconvert_z=1
ro.sf.ecompassposition=4
allow_all_orientations=1
# Set Camera Orientation
# Use OSD2 mouse patch
ro.ui.cursor=osd2
ro.hardware=amlogic
# Enable 32-bit OSD
sys.fb.bits=32
# Disable GPS
gps.enable=false
# Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-acodecs=asf,aac,ape,flac,alac
media.amplayer.enable=true
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
#media.amplayer.widevineenable=true
media.arm.audio.decoder=ape,aac
# Nand write need force sync when gadget
gadget.nand.force_sync=true
# Status bar customization
ro.statusbar.widget.power=true
yf.show.compat=false
ro.statusbar.yearmonthdayweek=true
# HDMI
ro.hdmi480p.enable=false
#rw.fb.need2xscale=ok
#media.amplayer.osd2xenable=true
#camera DCIM dir. 0:sd only; 1:nand only; 2,sd first
ro.camera.dcim=1
ro.camera.lockorientation=false
# Disable preload-class
ro.amlogic.no.preloadclass=0
# App optimization
ro.app.optimization=true
#Dual display
ro.vout.dualdisplay3=true
ro.vout.player.exit=false
# CPU settings
ro.has.cpu.setting=true
# CPU freq customized in setting menu
# normal, performance, powersaving
ro.cpumode.maxfreq=1200000,1320000,800000
# when usbstorage, CPU mode and freq
ro.usbstorage.cpumode=performance
ro.usbstorage.maxfreq=600000
ro.yifang.devicename=NX008HI
ro.yifang.hotpoint=0
ro.bootanimation.rotation=90
ro.keyguard.orientation=landscape
ro.yifang.weather.city=New York
ro.yifang.weather.isf=1
ro.yifang.ota.enable=1
#support media poll uevent,can use sd cardread on usb port
has.media.poll=false
ro.dongle.change.local=0
ro.yifang.locationsetting=1
#used forward seek for libplayer
media.libplayer.seek.fwdsearch=1
#enable address bar cover issue fixing
ro.flashplayer.surfacehack=1
ro.media.partition.label=Nextbook
ro.yifang.hotpoint=0
#ro.usb.vendor.string=Yifang
#ro.usb.product.string=PMP5580C
hw.erase.internalSdcard=true
ro.screen.has.usbstorage=true
virtualsd.enable=true
ro.yifang.bluetooth=0
ro.yifang.mobile=1
ro.yifang.mobile_dongle=0
ro.yifang.datausagesetting=1
ro.product.mobilenetwork = 0
ro.yifang.default.timeout=-1
ro.yifang.default.brightness=196
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.carrier=unknown
ro.opengles.version=131072
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.hardware.version=1.0.0.0
ro.vendor.name=YFMID