First off, I'm not some dumbass who doesn't know that the USB cable has to be in a wall jack to charge the NT. I'm just curious as to why this cable only charges with a wall jack and not when it's plugged into a computer...
Because
Well it does not give out enough power from the computer.
so it does not charge quickly.
But if you plug the cable in to your computer and the nook while leaving it on overnight, it should charge.
so it does charge, but just really slowly
(click dem thanks buttons)
Helps to turn the screen off too.
Sent from my BNTV250 using Tapatalk
Wall charger is 2000ma most PC USB are 500ma max.
I don't think the 500mA limit is the whole story. My Nook won't charge off of other 2A USB charger I have nor with any other cable (even if using the Nook charger).
EDIT:
http://forum.xda-developers.com/showthread.php?t=1386602
You need the stock cable to charge at the higher rate with compatible 2A chargers. Compatible chargers will have the data pins shorted. I've found that my HTC HD2's charger will actually charge my NT at the higher current as long as I use the NT's stock cable.
Related
Is there a program/driver that will allow the leo to pull more than 500mA when connected via usb? My TP2 (CDMA) has this installed and its bad ass. I can charge faster off things like a cable box (or my computer) than the wall. It pulls ~928mA.
Right now I have a Y adapter.. I plug the power only usb into the computer and the data into an external source (like a duracell powersource mobile). tBattery reads "AC" for charger input. Then, I unplug from the powersource and plug the data part of the usb Y into the computer, hopefully forcing it to switch to usb mode while retaining high current draw. No dice, its still on AC.. and the data cable is not communicating with the computer/phone. If i were to unplug the power only cable, it would probably switch right over to usb mode and WMDC would pop up and all that. But.. I would be limited to 500mA, which is.. really weak since the phone can only use about 150 of that for charging!
Charge with your phone off may help?
That is not possible, because PC can't give more than 500mA on one USB port.
Check in Windows device manager (PC) and find Generic USB Hub. Then look on "Power" tab.
Uploaded with ImageShack.us
You can't. You could burn USB port in your computer.
Mike
This is a screenshot taken from my touch pro 2.. Plugged into the usb port of my laptop. This is possible. It also is possible with my cable box. It requires a driver/app from nuerom..
http://www.nuerom.com/BlogEngine/po...g-nueBattery2-For-TP2-CDMA-v12-Build-122.aspx
btw.. ports are either in high power or low power.. 500mA should really say 500mA+... Some ports are NOT capable of doing this.. I'd imagine I could trigger the same by connecting devices to all three of my usb ports on my laptop.
many gigabyte mainboards have the function to deliver 3x more power through usb ports. ive tested myself and can only confirm it is charging within 1.5~ 2 hours completely
Yeah - maybe, but if... higher charging amperage causing battery/phone overheating and dramaticly shorting battery life. I know, that dedicated HTC HD2 charger having 5V and 1A (1000 mA), but this is TRAVEL charger and should be used only in this situation by reasons previously wroted by me. I charge my LEO only with PC.
i think it depends on the charger itself. i bought a docking station and while reading the manual i came across a switch that changes the mode between "charge" and "sync"
this lets your device acknowledge that the charger is capable of providing more mA than a normal USB port so that it can draw more power.
The ac charger (or the battery driver itself) is smart enough to trickle down the charge rate as the battery reaches maximum capacity. We have an aluminum battery cover that seems to have a heat pad to transfer that heat from the battery. The battery driver probably has provisions to stop charging if batt temp reaches a certain #.
500mA charge is not enough. The phone itself is able to draw more current than a 500mA line could provide.
I just plugged a y adapter into my laptop. Plugging only the power portion in. tBattery says USB for charger input.. Taking the data/power 'part' of the Y adapter cable and plugging it into a usb power source (with no data pins, like a duracell powersource mobile) puts the phone into ac charger input. I disconnect the duracell charger and leave only the phone plugged into my y adapter to my computer... still says AC charging.
I'm now able to charge the phone using 1 computer usb port. World doesn't end. Phone doesn't explode.
Pictures are worth a thousand convoluted paragraphs.
Is there a difference between charging with the supplied wall charger and charging using a micro USB cable attached to a desktop or laptop?
Slight difference -- the supplied wall charger charges at 600ma. USB charging from a PC maxes at 450ma so it isn't quite as fast. 3rd party chargers may be detected as USB and cause a slower charge rate too, so watch out for that.
Either way, you'll get charged. USB is definitely slower though.
Hello
As you know, our device doesnt get charged by the USB cable it comes with (or veeeeeery slow).
As I have a solar charging device with USB slots, I need a compatible USB cable. Somehow it has to work, is there some converter or something ?
Thanks!
Dominik
Eh? My device charges just fine with the included cable.
You will have trouble charging it from a solar powered USB charger as I'm guessing it will only put out 5V at maybe 500mA. That's not enough to juice the TF. It's not the cable though.
Because ASUS used a USB connector on its cable, unfortunately does *not* mean this USB connector 100% follows the specifications for USB.
It has a trick, whereby, when connecting to your PC it works like USB at 5v. But, when connecting to a 15v charger it switches to use 15v instead.
The TF charging indicator, and Android OS battery settings, only indicate charging when 15v applied. At 5v it may trickle charge with screen & wifi & ??? turned OFF. I never try charging at 5v because it is too slow.
LOL
I don't think it charges at all at 5v?
EDIT:
How can I delete a post?
Neo3D said:
I don't think it charges at all at 5v?
Click to expand...
Click to collapse
It will, provided you have the amperage. But its only trickle so its only really charging with the screen off and charges slower than the tablet uses battery.
I don't know if its a problem in my NT.
It changes only when concocted to the wall charger, not even when it plugged to the PC.
Anyone of you notice this?
TThe NT or the NC comes with a 10 pin charging cable, i was told it has a higher capacity to charge your device. If you don't use that cable, charging will be much slower.
Using the pc will only triggle charge, meaning very slowly, and only with you turn the nt to sleep while plugged in ur pc.
It is just one of the proprietary feature on the nt, sorry.
It does not make any sense.
The NT wall charger is 0.5A. I plugged it to my iPhone charger, which is 1A, with the original cable and it didn't charge.
shaharg said:
It does not make any sense.
The NT wall charger is 0.5A. I plugged it to my iPhone charger, which is 1A, with the original cable and it didn't charge.
Click to expand...
Click to collapse
0.5A must be the input, because the Nook Color/Tablet charger is 1.8A or 1.9A output
You are right. It is 1.9A
My mistake.
a normal micro usb cord cannot "fast charge" so in order for it to work you must trickle charge....plug it into your computer, unmount/eject the device(done on computer) and just turn it off/turn off the screen,
takes about an hour per ~10%.
Yup, its weird. It will say clearly: "not charging" but if you let it sit there plugged into any power source (0.5 amp USB included) and wait for a bit, the battery percentage will go up.
I read an early review, I think on Engadget, and it mentioned this as one of the few negatives of the device. Turns out, it just has a stupid UI.
Well, when you're using it, it isn't charging. There isn't enough juice to charge and run the device so it just runs off the USB power and doesn't use the battery. It needs to be sleeping then it can trickle charge as it uses a lot less power in sleep mode.
I've got around 4 different micro-USB AC Adapters that I have lying around. One is the OEM Lenovo, One is OEM Samsung (i777 charger + Samsung Micro-USB cable), one is a multi-USB port AC adapter with a micro-usb cable, and the last is an iPad 2 wall charger with a micro-USB cable.
ALL of the chargers except the OEM Lenovo ones don't charge my tablet. When It's plugged in, for a couple of seconds it says Charging (AC), and then it just switches to discharging. I've tried all the aforementioned chargers and cables in different combinations, and the ONLY ones to work correctly is the Lenovo combo.
Is there a specific reason to this? Also tried all 4 cables connected to my PC.. They all don't charge efficiently at all.
look at the Voltage and Amperage of the adapter !
Lenovo use 2A if I remember well, the other use only 1A
quyTam is correct... most USB chargers are between 500mA and 850mA. The dual battery design of the tablets requires a min of 2A to charge correctly. This is why most computer USB ports will not charge the device.
However... the changer isn't the only thing restricting the power. The cable you are using can also effect power. Not all cables are created equal.
I stopped by Staples just after getting my tablet and picked up a 4 port 2.1A USB wall charger. It will charge my phone, Bluetooth, and tablet. There are also really nice 2A "extra battery" devices out there that allow you to a charged battery with you that will power and recharge your device.
I also recommend the dock for the tablet... it has a 65w power supply and charges the tablet in a 1/3 the time then the usb chargers.
where to get a charger
i tried 2Amp chargers....didn't help/
my brother says:
"the pins are slightly different/off/longer/shorter/what DID lenovo do here?"
as a safety i bought:
http://www.ebay.com/sch/?_kw=886605022780&_clu=2&_fcid=100&_fvi=1&_localstpos=&_stpos=&gbr=1
just in case...
it costs an arm and a leg for a microUSB charger, but not charging the device for a couple of days would cost me more :S
just another things that makes the TPT slightly less then perfect
o,O
Charger
I use a Dell Axim x51 charger and an LG cable from an old phone. Seems to work very well and eBay prices for the charger are less than $4.
http://rootzwiki.com/topic/8523-rev...arger/page__st__40__gopid__448194#entry448194
In my experience a 1A charger will also work. Nothing less than 1A will do anything.
I keep my Lenovo charger in my home office and use a 1A phone charger next to my bed for overnight charging.
I too have a 4 port mains to USB charger: 2A but I thought it was distributed to the 4 ports. If all were being used then each port would only be .5A.
Will have to try it out. If it works it would lighten the travel load of chargers.
Gottoon said:
quyTam is correct... most USB chargers are between 500mA and 850mA. The dual battery design of the tablets requires a min of 2A to charge correctly. This is why most computer USB ports will not charge the device.
However... the changer isn't the only thing restricting the power. The cable you are using can also effect power. Not all cables are created equal.
I stopped by Staples just after getting my tablet and picked up a 4 port 2.1A USB wall charger. It will charge my phone, Bluetooth, and tablet. There are also really nice 2A "extra battery" devices out there that allow you to a charged battery with you that will power and recharge your device.
I also recommend the dock for the tablet... it has a 65w power supply and charges the tablet in a 1/3 the time then the usb chargers.
Click to expand...
Click to collapse
That's for sure. I thought the dock was a waste of money until I forked out on Amazon. Saves so much time it isn't funny....
Sent from my Nexus S using xda premium
The tablet needs to see 5.3 V, when using >500mA.
Already thinner USB-Cables increase the voltage drop
so the thinkpad wont charge, even with the original charger.
It may have less to do with your charger than with the cables. I bought extra long (6 and 10 ft) USB cables for charging phone and my TPT. The 28AWG of any length won't charge the TPT. The 24AWG 6 ft and 10ft cable *will* on a 2A charger. I haven't tried other combinations. I believe it will charge on a 1A charger as well, but would likely require the larger 24AWG cable.
Sent from my PC36100 using Tapatalk
Design Flaw in Thinkpad Tablet prevents Landscape Mode Charging for Developers
I actually sent my 1838-22U in for service, thinking that there was a hardware problem preventing charging while connected via USB. At first I had noticed that while connected directly to a PC via USB for development purposes (no docking station), the unit indicated that it was charging. However, it seemed to be discharging faster than it was charging and slowly worked its way down to unusable. Lenovo Tech Support indicated that they had heard of this happening, and that I should send it in to have its system board replaced. I sent it in only to find that all they had done was replace the battery and reload the firmware. I did notice, however, that when I connected the USB cable, it appeared to go into charging mode for a couple of seconds then switch into discharge mode. I asked Tech Support about this and they said they this was actually the way it should have been behaving all along, and that this was by design.
The User Manual (see attachment) states only that it might not charge, and that it will only discharge if the tablet "exceeds USB 2.0 power limits" (i.e. 500ma).
Well, the Thinkpad Tablet seems to be pretty good at doing that.
Here's where I present to the development community a conundrum. How can one develop in landscape mode while charging (even slowly)? In portrait mode, one can use the accessory docking station, which uses its own charger and charges through the proprietary connector next to the micro USB port, while separately allowing the USB to be used for data. In landscape mode, there is no such option. I will accept that the unit may draw too much current to charge well via a 500ma USB data connection, but then Lenovo should provide a optional charger that connects directly to the same proprietary connector used by the docking station. This is done elsewhere. For instance, Motorola realizes that the Xoom draws too much current to charge via a USB data connection, so they don't even bother with it - they provide a dedicated charger connection and charger.
==UPDATE== 25-May-2012
SOLUTION FOUND
The solution to using a data connection and charging the Thinkpad Tablet at the same time, without relying on the portrait-mode-only Dock Station, is to connect through a powered USB hub which supports the USB Battery Charging Specification (with a Charging Downstream Port). The specification provides at least 1.5A, which quite handily satisfies the Thinkpad. I found such a hub, the GWCTech HU2V40, on Amazon for $15.99.
If you get this model, note that only one of the 4 ports can be used for high-current charging. It includes a tiny "Smart Charger Adapter" but which appears to block the data connection (at least when when used with the Thinkpad). In other words, ignore the little black passthrough adapter included with it, and plug directly in as you normally would. The instructions don't explain the purpose of the passthrough adapter.
Hi everyone!
I just wanted to ask this: I just bought a 90W charger for my laptop. It is a "Targus Compact Charger for laptop and usb tablet"
It charges my laptop and also has that usb port which charges through a cable, compatible devices. Only that on that usb port, it says that it charges 2.1A, which is a lot. My phone charger does only 550mAh.
So the question, shouldn't I charge my phone through the adapter?
Thanks in advance!