Hi all, I hope you guys can help as I'm coming up blank here after days of trying to fix this.
First, yes I read this thread and a few people were reporting the same problem but the solution was always to flash a stock firmware with odin.
Right now my wife's phone is stuck in a boot loop, she doesn't do anything out of the ordinary with it, I rooted it when she first got it 3 months ago and then flashed a stock kernel to get rid of the yellow triangle and it has worked perfectly until last week when she told me it was stuck at the galaxy s2 logo. No problem I though, I'll just flash a stock rom with odin and all will be well.
Well it didn't work out that way, I've flashed the original firmware, an ICS leak, Villainrom 1.1 and XXKI3 multiple times, with and without pit file + re-partition. I've flashed the old bootloader and I've tried a few custom kernels as well, and multiple combinations of the above. Nothing is getting it past the boot loop. The only result I've had that is any different to how I started is with an ICS build I got a screen saying kernel panic upload (or something like that, I don't have that rom flashed at the moment). When I connect at this time odin recognises the phone so I guess it's in download mode.
I can't get into recovery mode so I can't do a factory reset, when I press vol-up, home and power I get a blank screen for a moment followed by the same boot loop. I can get into download mode and odin is reporting successful on every flash. When I flash a custom rom or kernel I get the yellow triangle, it goes away when I flash a stock rom or kernel.
According to my wife just before the crash android market reported updates available and she installed them. I don't know if that's related or not but she says when she went back to the phone it had hung so she turned off the phone, upon turning it on it was stuck in boot (the big animated purple S part of the boot) so she removed the battery and since then it doesn't get past the initial galaxy S2 screen, sometimes, depending on which kernel it's on, the galaxy screen goes blank for a second or two and then the logo comes back.
I've really tried everything I can think to try, warranty isn't really an option as I'm in Saudi Arabia and I've been told it will take 3 months to get the phone back, also I can't easily access a jig, I'd have to make one and I'm not too confident in my ability to do that.
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
tl;dr random boot loop, tried flashing everything I can find, no recovery mode but download mode works fine, help!
davegene said:
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
Click to expand...
Click to collapse
Flash a full wipe firmware and see if that helps, if you need one there is a link at the bottom of my insecure kernel thread.
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
davegene said:
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
Click to expand...
Click to collapse
Have you tried with repartition and update bootloader ticked?
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
davegene said:
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You need a pit file, use the 1 from the other firmware.
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
davegene said:
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
Click to expand...
Click to collapse
Most strange, look like your off to service
That's most unfortunate, I'm in Saudi Arabia and they have quoted 3 months to get the phone back under warranty although in reality I'd be lucky to get it back at all.
Are my options really exhausted or is there anything extreme I can try?
I ended up making a jig and took it for warranty repair and they were able to do it locally, it only took a few days.
The curious thing is even though I repartitioned several times using two different pit files the sdcard partition was still intact.
I'm pretty sure I was doing it right and the yellow triangle was coming and going as I was flashing stock and custom kernels so the flashes were taking.
I don't speak Arabic so I couldn't ask how they fixed it but what do you think was the problem? I was very surprised to find the data intact, it even had the same stock ROM that I flashed before I took it for service still installed.
Anyway thanks for your help in this thread odia.
Sent from my GT-I9100 using xda premium
I'd love to know what they did.
Sent from my GT-I9100 using XDA App
Related
hey guys!
So I have had my phone for about 3 month, and today I had decided that I should see if they're any firmware updates since I had not checked in a while. So I did a search in my settings and it said I need to update so I did so. So it downloaded and it seemed to install but when it went to reboot, it just stayed on the boot screen.
I went into recover mode and set it back to factory settings, but still had no luck. Any ideas what to do as plan b?
Give it a few minutes (5-10 Mins) for the first time after updating... It may seem locked up but usually its not the case... After the first boot.. It will boot normally again....
If truly not working suggest downloading latest firmware package for your model and try flashing via odin
hope that helps^^
Sent from my SHW-M250K using XDA App
http://forum.xda-developers.com/showthread.php?t=1108499
jje
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
alexbrugs said:
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
Click to expand...
Click to collapse
Branded Provider roms post dev section
Stock Samsung roms .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Help out...Samsung galaxy can't boot
Hello Guys,
I am not sure whether I am putting right question in the right place or not? I hope you guys don't mind and apologize me as my mind not working due to my foolish act trying to fly even without wings.....
Here is the story
I got my galaxy s2 I9100 a week ago. I tried to go for root. for this I did it using Odin v1.85. My firmware KH5 as its not available here I tried a related one say KH4. I followed all instructions carefully. Successfully brought in download mode. selected the download mode. connected with odin and browse the PDA .tar file. my mobile was recognized by yellow indicating and I starting. It showed the process running and also showed yellow bar turning in green saying "Pass". But soon mobile stucked at boot page and a yellow triangle appeared. Now I realized I made something wrong in eager of rooting. I tried other .tar files like KH1, KH3 and even KF- etc. But same problem. I tried to solve it by bringing recovery mode but It can't go to recover mode even. Now I can only go to download mode can try flashing via odin but can't get my mobile ahead of boot logo. Please helppppppppppppppppppppppppppp
@ habeebrasheed,
Flash stock firmware from Intratech thread via Odin with phone in download mode.
Then you will have a working phone and can start fresh.
Sent from my GT-I9100 using xda premium
Thanks anyway
@UpInTheAir
Thank you for the suggestion
I have submitted it as the warranty still void ... lets see if they do it or reject straigh forward. Thank you. I will sure keep in mind your solution,
Thankssssssssssssssssssss
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Nerz said:
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Click to expand...
Click to collapse
The one-click downloader is NOT from me, it's a repack of my tar file - and it's starting to sound like the one-click is doing something weird and not flashing the kernel properly.
Use regular old Odin (or Heimdall) to flash the raw tar package.
I'll try it. Though I don't understand how I am in the position I am in from browsing the web on my phone to directly going into a hootloop that neither that odin one click will fix, or any cwm roms won't fix.
Sent from my GT-I9000 using XDA App
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Nerz said:
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ok so after flashing the odin file from http://forum.xda-developers.com/showthread.php?t=1286432 it is still bootlooping at splash screen.
I'm not sure what my options are right now. I'm pretty sure bootloaders can't be the problem. I can't re-partition from odin because it says it can't open the specified file "(Line: 1828)". Is this because it doesn't have pit file? I don't understand how this problem manifested.
If I need to pull contents from sd card from cwm, will flashing a cwm kernal increment flash counter?
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Entropy512 said:
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Have yet to flash a pit file.
Sent from my GT-I9000 using XDA App
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Juq said:
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Click to expand...
Click to collapse
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
hardgrid said:
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
Click to expand...
Click to collapse
Will try to help, but will need more specific information.
The OP of this thread started bootlooping while checking a web page in his browser. So, how did it happen for you? Please give as much exact information as possible. Was it after a flash? Or did it start while you were using the phone? Or how?
Mine was connected to an aftermarket car charger while it happened. I read a post somewhere and a couple ppl it happened to believed the same thing, since it was in my 30 day trail period I sent it back to Sams club and got my replacement today. Since I didn't have a jig at the time, I didn't want to flash a cwm kernel and increase my flash counter so I lost some pics of my kids.
Not sure if it was charger related but I couldn't find a fix and wouldn't really call myself a noob at flashing. Might have some things to learn nut far from a noob.
Sent from my I897 using XDA App
Hey guys.
I have a GT- i9300, I rooted it in odin with CF root, no worries, installed foxhounds Rom with SiyahKernel. All was fine for a few weeks. My phone then randomly shut down one day and would not boot. (had not installed any 3rd party apps, custom upgrades or anything for a few days).
My phone now only boots to the Samsung splash screen. Will not boot into recovery mode either. Download mode still works
So i tried to re flash the kernel through odin but I get an error "no PIT partition"
Tried flashing a stock Firmware through odin, same error.
Tried flashing CWM again through Odin, same error,
Tried flashing CF root again in Odin, same error.
Any ideas please help???
I have looked all over the net for two days now and found some people with same problem but they have not fixed it yet.
Would a 3-part firmware work in Odin? If so I have downloaded countless ones only to find they are the single .tar file
3 part works via Odin.
jje
Sent from my GT-I9300 using xda premium
Any idea where I can get one from? Every Rom I download is only the one .tar file.
Sent from my GT-I9100 using xda app-developers app
same problem here...
any help will be very appreciated...
tzujeff1008 said:
same problem here...
any help will be very appreciated...
Click to expand...
Click to collapse
Hey Man, I have been searching the net for days now and trying countless different things in Odin but still no Luck. From what I have read if we can find a 3-part firmware +pit file and we flash them through Odin and tick re-partition it should fix it.
Problem being I cant find one, I have asked on other forums and asked Intratech himself but no response yet. If I figure it out though I'll let you know and you do the same for me hey?
R4M30 said:
Hey Man, I have been searching the net for days now and trying countless different things in Odin but still no Luck. From what I have read if we can find a 3-part firmware +pit file and we flash them through Odin and tick re-partition it should fix it.
Problem being I cant find one, I have asked on other forums and asked Intratech himself but no response yet. If I figure it out though I'll let you know and you do the same for me hey?
Click to expand...
Click to collapse
hey, no luck for me so far. I am from Taiwan. I have found 5-part stock firmware, which has pit, bootloader, phone, csc, PDA. But it gave me another error: Re-partition operation failed. It seems the partition table has been crashed.
I have returned it for repair(distributor), and I was told that the phone needs to replace the mainboard. And since they told me I have tried to install custom firmware or software, I no longer have the warranty. The fee is unacceptable high, almost half price of the phone.
I will take my phone back and send it to Samsung repair center. Wait and see if any different solutions Samsung can provide me.
I am still looking for other possible solutions, and if I found one, I definitely will share it with you.
The worse thing is the hardware damage. Hope it is not....
Hi,
I'm having the exact same issue...
It happened me after installing CM10 Prev. #4.. I tried to make a phone call to test the sound problem. and suddenly it rebooted into a boot-loop.
After that I tried to re flash the .zip file to get it booting again but i couldn´t even get into {install zip from internal SD Card]
Then i tried to go back to stock with Odin but didn't work..
Tried to repartition with different .pit files on different pc's with different OS. but nothing helped..
I'm planning on returning it too. I hope they will repair it...
i'll let you know and looking forward to hear something from you.
I ended up taking mine back and it got replaced under warranty
Sent from my GT-I9300 using xda app-developers app
tzujeff1008 said:
hey, no luck for me so far. I am from Taiwan. I have found 5-part stock firmware, which has pit, bootloader, phone, csc, PDA. But it gave me another error: Re-partition operation failed. It seems the partition table has been crashed.
I have returned it for repair(distributor), and I was told that the phone needs to replace the mainboard. And since they told me I have tried to install custom firmware or software, I no longer have the warranty. The fee is unacceptable high, almost half price of the phone.
I will take my phone back and send it to Samsung repair center. Wait and see if any different solutions Samsung can provide me.
I am still looking for other possible solutions, and if I found one, I definitely will share it with you.
The worse thing is the hardware damage. Hope it is not....
Click to expand...
Click to collapse
Hello tzujeff1008
I have same problem & I couldn't find that ROM.
Thanks first of all & Please Give me link of that ROM or tell me where I can find that.
R4M30 said:
I ended up taking mine back and it got replaced under warranty
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
mine too got repaired ,under warranty
Sent from my GT-I9300 using xda premium
tzujeff1008 said:
mine too got repaired ,under warranty
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
wo that nice ..hey after flashing.. have u dne trangle away? asking coz u have rootd and still u got replcement: S ???
Sent from my GT-I9300 using xda premium
please pleeeeeeeeeeeeeeease help me guys!!!!!!!!!!
my phone is ****ed up.
i was runing checkrom V3.5.connected device to AC charger(supplied charger) and then slept for 1 hour.
when iwake up my device stuck at samsung logo.
i can't enter recovery mode,just can go to download mode.i got there and tried to flash CF-root v6.4 with odin v1.85(in chainfire thread said),when i hit start in odin it fails and says there is no PIT partition.what should i do?
i downloaded odin from SAMMOBILE.COM, and in zip file there is PIT file.now what should i do?should i flash stock firmware?
it's important to say i had SGS2 before and i'm not noob.
pleeeeeeeeeeeeeeease help me:crying::crying:
which .PIT file should i use?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
can i try to flash phone via odin with .PIT file and kernel
boobool said:
please pleeeeeeeeeeeeeeease help me guys!!!!!!!!!!
my phone is ****ed up.
i was runing checkrom V3.5.connected device to AC charger(supplied charger) and then slept for 1 hour.
when iwake up my device stuck at samsung logo.
i can't enter recovery mode,just can go to download mode.i got there and tried to flash CF-root v6.4 with odin v1.85(in chainfire thread said),when i hit start in odin it fails and says there is no PIT partition.what should i do?
i downloaded odin from SAMMOBILE.COM, and in zip file there is PIT file.now what should i do?should i flash stock firmware?
it's important to say i had SGS2 before and i'm not noob.
pleeeeeeeeeeeeeeease help me:crying::crying:
which .PIT file should i use?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
can i try to flash phone via odin with .PIT file and kernel
Click to expand...
Click to collapse
You have no choice! Try every pits you got, you might get another error : Re-partition operation failed...
So far, I believe that is hardware damage, and there is nothing you can do but send it back for repair(replacement).
If you have run triangle away before the phone crashed, then you are lucky, You might get replacement under warranty.
I did that before broken. There was no counter, but showed custom rom in download mode.
So it is hard to judge if I flash custom rom or not. The second time I sent my phone back to same repair center, they finally did replacement for me for free.
Good luck to you, and hope it is not hardware damage.
tzujeff1008 said:
You have no choice! Try every pits you got, you might get another error : Re-partition operation failed...
So far, I believe that is hardware damage, and there is nothing you can do but send it back for repair(replacement).
If you have run triangle away before the phone crashed, then you are lucky, You might get replacement under warranty.
I did that before broken. There was no counter, but showed custom rom in download mode.
So it is hard to judge if I flash custom rom or not. The second time I sent my phone back to same repair center, they finally did replacement for me for free.
Good luck to you, and hope it is not hardware damage.
Click to expand...
Click to collapse
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
boobool said:
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
Click to expand...
Click to collapse
Did you try with GT-I9300_mx_20120329.pit ? works fine for I9300 repartition...
boobool said:
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
Click to expand...
Click to collapse
I connected phone to the charger over night, and when I woke up, it just happened.
I have no clue why this happens, just doubt if the charging system has flaw.
Great that I can share experience with you guys.
Chewee91 said:
Did you try with GT-I9300_mx_20120329.pit ? works fine for I9300 repartition...
Click to expand...
Click to collapse
tzujeff1008 said:
I connected phone to the charger over night, and when I woke up, it just happened.
I have no clue why this happens, just doubt if the charging system has flaw.
Great that I can share experience with you guys.
Click to expand...
Click to collapse
thanks for responses brothers.
i tried 5 different pit files and one of them was GT-I9300_mx_20120329.pit.
it didn't help.actually when inserting pit file in odin it says Re-partition operation failed. and when pit place in odin is empty it says there is no PIT partition.
i tried to flash 3 part stock rom,same result.
tried those methods with odin 3.04 and odin 1.85, both of them gave me same result.:crying::crying:
If you always search a 3 parts firmware, try this one:
http://hotfile.com/get/159511026/500faffb/47a90c3/I9300XXALE8_I9300OJVALE7_FWD.zip without and with pit file
(morocoo CSC i think), just in order to test if it's works.
If it is, you'll flash your firmware (CSC THR) here:
http://hotfile.com/get/164216390/500fb0d0/c94977c/I9300XXBLFB_I9300OJVBLF3_THR.zip
If don't work, use warranty...
Just letting you know that i had the Exact same problem.
When trying to flash (when in download mode) it would always error when trying to get the PIT information.
Nothing would work, besides from download mode. When trying to hard reset, it would get to the logo screen and immediately turn off.
It was rooted + cmw + no triangle away. So it could be easily seen that it rooted
I took it back to warranty.
It was a fault motherboard. That was the issue. They replaced it and re-flashed with stock os.
And it was covered under warranty (the best part).
Same I issue I think
Hi. I think I have the same problem with my unrooted, stock S3. (unbranded UK)
Just suddenly apopeared with the grey battery with the static "O" symbol in it, and when booting doesn't get past the first Samsung screen.
Can get into recovery mode, when trying Odin with XXBLG8 stock ICS ROM, I get the "no PIT partition" error.
Please tell me my phone isn't dead :crying:...
Cheers
Brad
i was using:crying: neat rom until today , this morning i was using it simply looking through apps my phone got stuck and now its in a boot loop ....it does not load after the samsung i9100 appears. and i have flashed other stock roms but it is not working and when i do a wipe factory data it again stucks and i have to put the battery out.
adeeljalali said:
i was using:crying: neat rom until today , this morning i was using it simply looking through apps my phone got stuck and now its in a boot loop ....it does not load after the samsung i9100 appears. and i have flashed other stock roms but it is not working and when i do a wipe factory data it again stucks and i have to put the battery out.
Click to expand...
Click to collapse
seems like you are new on xda, so welcome buddy,
download a firmware from sammobile, you have to register yourself, before you can download anything, dont worry, its free. flash this one file via odin3 v3.04, drop the file to PDA, connect your phone with USB and go to download mode, start just everything from begin.
i have tried all the things but i cannot solve the problems
Have you tried flashing a different Kernet?
True, did you try a other kernel ? Dorimanx v8.34, its good, by my side, its perfect, not bugged etc. flash via odin
adeeljalali said:
i have tried all the things but i cannot solve the problems
Click to expand...
Click to collapse
Do a full wipe. It will get you out of the boot loop (hopefully)
Why does it 'not work'? There's gotta be a reason. Does odin fail when it flashes? If so, click the link in my signature and follow those steps.
And you do have an i9100 right? If you do, flash JB leak using odin. Download it from samfirmware. Its a 3 part firmware, and will wipe your device as it flashes. Give it a go.
i have tried all the things done flashing , stock and custom kernels and also the pit files but the behaviour is still the same ......
There"s no quick fix for this (other than buying a new phone) afraid you're here for the 'long haul'........
Look at @Hopper8 s guide for troubleshooting a failed Odin flash and follow it exactly (all steps) and repeat (all steps) as often as is necessary.........
......Unless you've done irreparable harm by flashing a pit file......
Sent from either my S2 or my W via XDA developers app
and now my device is bricked
Damn.
adeeljalali said:
and now my device is bricked
Click to expand...
Click to collapse
hard or softbricked ?
i think its hard .......because whin i press power button it does not shows any thing the cellphone becomes warm ,from the under side the sim area , but not too warm a mild one........ and i made the jig but accidently put 300 ohms instead of 300k ohm ......i have ruined it further more
I'm having real issues trying to get a stock ROM on my Virgin Mobile S3 (GT-I9300) and I'm hoping you guys can help me. I've looked absolutely everywhere for a solution but so far nothing has worked.
OK so a little history about the problem:
Using phone as normal, and then randomly turns off. Turn it back on and I get the two Samsung splash screens loop booting constantly. I boot into recovery mode and do a factory reset - same problem. Clear the cache - same problem. Send phone back to Virgin and they tell me I've rooted and installed a custom ROM which I absolutely have not but they have a screenshot with the custom counter showing '1'.
I've no idea how this is possible, but I would have remembered if I'd installed a custom ROM. Anyway, they send it back because I'm not going to fork out £100 for them to flash it.
So...lots of research later, I download the latest Odin (3.09), find the most likely stock ROM that will work with my phone (Carrier is Virgin Mobile UK). I find this ROM on SamMobile: I9300XXUGMK6_I9300OXAGMK6_BTU. Cannot for the life of me find an actual Virgin rom so this apparently should be fine as it's a generic EU build.
Fine, so I apply it using the AP selection in Odin, connect phone, it goes through and applies fine "PASS" etc.. and phone reboots automatically.
Now, it just sits at the Samsung splash screen (the static white text) and doesn't go any further. I've left it upwards of 10 minutes but no dice. So look online and find threads that suggest booting to recovery and doing a factory reset will do the trick. So try that (Power+volume up+home) and same problem - static splash screen. Balls.
So now I don't know what to do. I either need to try an actual Virgin ROM which doesn't seem to exist(?!) or my phone is truely bricked and I'll finally have a good reason to destroy the thing.
Can anyone let me know what the next steps should be? I would be eternally grateful.
Thanks in advance.
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
shivadow said:
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
When you say 'wipe' do you mean factory reset via recovery mode? Because I'm not able to access that. All I can get to is Download Manager to use with Odin...
I thought you said you could access recovery and you had cleared cache. In that case you are buggered. If it goes through the flashing phase and reboots but you still cannot get into recovery then you have 3 options..
1. Flash another rom but no lower than 4.3. Carrier shouldn't matter.
2. Full on flash with pit file (dangerous and can perma brick).
3. Return the phone under warranty and state that the flash counter also clocks official flashes too, samsung should know this as they make the phone.. staff need training if they say otherwise.
Sent from my GT-I9300 using Tapatalk
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
It sounds like nand failure, so it's possible that you won't be able to fix it.
Sent from my GT-I9300 using Tapatalk
I thought you said you could access recovery and you had cleared cache.
Click to expand...
Click to collapse
Apologies for not being clearer, before sending it back to Virgin for the warranty repair I could access the recovery mode fine, when I got it back I couldn't - whether that was caused by the flashing of the firmware or something Virgin did I don't know unfortunately.
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
Click to expand...
Click to collapse
Thanks for the tip - I've flashed the stock recovery and I can now get into recovery mode! Looks slightly different but I can now access the factory reset/wipe cache options so that's some improvement.
I'm just downloading the stock international ROM as per this thread http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847 but it's going to take a few hours. Thanks so much for your advice so far i'll report back once the download completes.
No joy
I can however get into download mode and recovery mode now. Is there anything else I can try? Is it possible I can get a custom recovery image on there and flash it with something other than the stock rom?
I've got a feeling you're correct and it could be a hardware fault. Virgin say I can pay £100 to get it fixed, if they have to replace the entire phone that would prove it wasn't 'tampering' that caused it so I could potentially get my money back I guess, if I complained. I think that might be my only option now.
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
crispin85 said:
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
Click to expand...
Click to collapse
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
ag4751 said:
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
Click to expand...
Click to collapse
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
crispin85 said:
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
Click to expand...
Click to collapse
Make sure you are using the USB cable supplied with the phone and it is connected direct to your PC USB port, ideally the ones on the back but don't connect through any multi USB port connectors.
The USB cables and how you connect can make a difference