Related
Hey People,
just wanted to share my Configuration of the new XWKS9 Firmware. Android 2.3.5 and Baseband KS2 ! Download it from here.
All Credits, of course, for the following go to their respective Authors/Devs !!
Please take care of the Information and be careful while flashing !
My Problem with the FW was first that it didn´t start correctly after flashing. Solution : Hold Power + Home till you get into Recovery, then Wipe everything, reboot, it will work
Once you got booted up, Power off and go into Recovery again, then flash the CF Root Adaption from here here make sure that you download the
CF-Root-S5830-v3.7-b82.zip (11.95 MB)
After flash, you have the KS9 Firmware rooted and some bonus :-D
Many thanks to ketut.kumajaya for this !!!
The Language in the Rom is Dutch first. You need to go to
"Instellingen" then "Landinstelling en tekst" then "Taal selecteren" and then choose your Language.
To get Access to the System Folder of your Phone, use ES File Explorer from the Market. (Switch to "Root Explorer" and Mount System "RW" in Settings")
Now delete the Samsung Stuff you don´t want, or need. But be careful, some .apk are very essentiel and deleting them may brick your FW so you have to reflash !
A list of Files that can be deleted will follow here ! (.apk & .odex)
- Clockwidget - Deskclock - Dualclock - Forest - GenieWidget - jobmanager - Marketupdater - MyFiles - Protipps - Samsungapps - SamsungAppsUna3 - SamsungWidget_ProgramMonitor - SamsungWidget_Stockclock -Swype - syncmldm - thinkdroid
These are the Apps I don´t use, delete with caution !
Just make a Backup in Recovery (that came with the CF Root Adaption ) before you delete files, so you can easily restore your Rom !!
Browsing in XDA-Forums I found this :
The Gingerbread Keyboard, installable File from here
Thanks to hotaru for this !!!
The Stock Launcher (Touchwiz) isn´t very nice I think, my choice was GO Launcher EX from the market, you can customize so many things with it!
But I also found a nice Launcher here many thanks to claystoneinc for this !
If you don´t like the Facebook Widgets you may try this from Kamma, many thanks to him for that !! There is another one I found but havn´t tested, Screenshots do look promising ! Get it from here Thanks to ericcsonka
I am going to upload a little Collection of very useful Tools I found here in the Forum and in different Roms I used. Don´t Panic, it´s all freeware, all Files are also available trough the normal Market or from XDA Forums! If there is anything that isn´t correct please let me know !!!
I hope that this helped a little, yes I know, noone asked for it
Update : Here are the Tools Tools
I was looking to do this too. Most of the steps seems to make sense to me. Especially the list of apps to delete is useful.
One question though: Why would you install the Gingerbread keyboard seperately?
KS9 is Gingerbread right?
Fishlips said:
I was looking to do this too. Most of the steps seems to make sense to me. Especially the list of apps to delete is useful.
One question though: Why would you install the Gingerbread keyboard seperately?
KS9 is Gingerbread right?
Click to expand...
Click to collapse
Yes of course it is Gingerbread but Stock comes with Swype and Samsung Keyboard only
Maybe we can collect other useful Tools here? Everybody has his own favs and I'm always thankful for new things
Sent from my GT-S5830 using XDA App
DISCONTINUED
Sorry, I just sold my phone, and I can't develop for it anymore. I will keep these threads for you guys until something better will occur, but I will have some trouble to solve the problems. Thank you for all appreciations.
-- If this will help, you can still say thank you -- press the Thanks button! :good:
For those who are fans of MIUI, this is the closest thing. MIUI announced already that they will not support dualsim phones. But two of its "children", LewaOS and Baidu CloudROM are targeting that niche. LewaOS it's more suitable, but they didn't released a ROM for this phone... yet. Baidu did, but their ROM is focusing on China market - all farmework, and proprietary apps are filled with references to China locations, zones, codes, telephony operators, etc. I tried to build a ROM from LewaOS OpenBuild source, but unfortunately that is for gingerbread (the one from github).
I took last Baidu ROM, 32, and I made a version most in English. I put there and Morelocale apk for extra languages, but ICS 4.0.4 platform has only 16-18 languages.
Features:
- like any MIUI or LewaOS ROM.
- there are a lot of settings, and gadgets
- I removed non-important apps, integrated Google Apps
How to install:
- download the ROM zip
- delete from sdcard the well known three folders: .android-secure, Android, LOST.DIR
- in bootloader flash attached baiduboot.img
- in recovery do a full wipe
- in recovery install ROM zip from sdcard
- reboot, and wait for first boot. It will start with google setup wizard.
- do all the settings you want
- Here you go! Done!
If you choose to try this ROM, I assume that you know what you are doing, and I am not responsible if you brick your phone.
Download
1. HTC Desire V Baidu CloudROM v32 Max flavor v3 Deodexed
2. HTC Desire V Baidu CloudROM v32 Max flavor v3 Odexed
UPDATED to Version 32.
On first run it will be a big clock-weather widget on home screen - just drag it to upper margin to delete - it can't be removed for good since it is related to three jars from framework, only from screen. I did removed baidu weather because it was very limitative (only few cities from around the world), but I integrated Android weather which is much better.
Then, delete all shortcuts you don't want on any screen.
To remove the chinese bulletin from last screen on left, press menu button on home (the one with last open apps in stock ROM) and select home settings, then in opened menu scroll down to the last line and uncheck it - see the last screenshot.
To see last opened apps press and hold home button.
To set names and other things to each SIM, in DualCard settings menu, press the SIM number (22601 or 22610) and make those settings in newly appeared menu.
And, so on... you have to find by yourself how this ROM works, because are too much to talk about its settings.
carliv, nice work but any questiones .
support rom update OTA?
Version 29 i had trouble with location , support Version 31 location?
Version 29 exchange conection failed , support Version 31 exchange?
i am glad for your replay, Thanks.
alien1947 said:
carliv, nice work but any questiones .
support rom update OTA?
Version 29 i had trouble with location , support Version 31 location?
Version 29 exchange conection failed , support Version 31 exchange?
i am glad for your replay, Thanks.
Click to expand...
Click to collapse
I don't think it will support update OTA, because we don't use Baidu recovery, and the ROM is striped out. But I will make a new version for new ROM (32, 33... and waiting for v5 stable).
Location worked fine for me, it will ask you first to update some data from market, and after that all good.
I don't know about Exchange, I didn't tried it, I don't use this ROM currently (I use my senseless version), because I don't really like MIUI.
If LewaOS will release a ROM for this phone, maybe I will try it, because from what I've seen on other phones, it's a very stable and fast Android OS, and is not so much oriented for china market like Baidu.
I made this ROM because there are some people who wanted an English version.
Carliv, thank´s for your replay.
oky we will look forward .
I use at the moment your ROM HTC T328W -supercharger-Sense 5 . This ROM is great i´m happy with this. thank you very match for this work!!!
Kind Regard,
alien 1947
hi
i installed this rom.it is lovely smooth and really ell done,some bugs here and there but non major and can live with them.plz carry on development.this is a very good step to maintain this thread.we need it.
thnx dude.
im so greatful for the new update.im now downloading and will install tomorow and give my feed back soon.i am very thankful for the efforts and hope you carry on.we have to make alot to make this thread a life and ask every one to keep it a life with them subscription and replayes.
you welcome
new version in chinese
http://bs.baidu.com/platform-rom/102/T328W/T328W_102_20130906161712.zip
from here
http://bbs.rom.baidu.com/download.php?phoneid=16
New October Chinese Version
http://bs.baidu.com/platform-rom/102/T328W/T328W_102_20130922154026.zip
website
http://bbs.rom.baidu.com/download.php?phoneid=16
You can install Chinese Recovery by using Desire_V_All-In-One_Kit_v1.0
then flash the chinese version by pushing second option of Chinese recovery, then second option, after that forse restart.
You can go back to English recovery and do your Backup\Resore anytime.
Here is version 39 beta public test
http://bbs.rom.baidu.com/download.php?phoneid=16
its getting smarter.
yes. working great!
got errors with traffic monitoring. any experience with that? my Chinese aint that good
I am guessing you desire v lang in Eng now, so U souldn't have problrm in dealing with any part of the system.
version 40
http://bs.baidu.com/platform-rom/102/T328W/T328W_102_20130823115452.zip
the rom is working smoothly.... except for one "little" thing:
THE PHONE!!! is not working
it crashes as soon as I try to start a call or receive one
WTF
does someone experienced my same problem?
perhaps the rom is for the dual-sim phone HTC Desire V?
I've no problems with the Baidu rom v40
Im running the Baidu rom for months now
Lt-MajorTom said:
perhaps the rom is for the dual-sim phone HTC Desire V?
I've no problems with the Baidu rom v40
Im running the Baidu rom for months now
Click to expand...
Click to collapse
i didn't refresh the signature but I have the DESIRE V
where did you get the V40 rom?
from here
http://bbs.rom.baidu.com/download.php?phoneid=16
Install Baidu build 40 but how?
almozaffar,
Could you please share with me how you installed build 40? What boot or recovery image did you use? I really want to install Baidu ROM on my Desire V due to its slick design, speed and stability.
this method:
mr.wasssup said:
Need to remove lines:
Code:
assert(getprop("ro.product.device") == "t328w" ||
getprop("ro.product.device") == "T328W" ||
getprop("ro.product.device") == "primods" ||
getprop("ro.build.product") == "t328w" ||
getprop("ro.build.product") == "T328W" ||
getprop("ro.build.product") == "primods");
at the beginning of updater-script, which is located on the folder path META-INF\com\google\android.
To open Baidu ROM use WINRAR, to change updater-script use Notepad++ with exposed coded 'UTF-8 (without BOM)'
Put the modified updater-script in the archive with the replacement of original.
Do not unpack or repack Baidu ROM archive!!
Click to expand...
Click to collapse
carlo.edmon said:
almozaffar,
Could you please share with me how you installed build 40? What boot or recovery image did you use? I really want to install Baidu ROM on my Desire V due to its slick design, speed and stability.
Click to expand...
Click to collapse
very easy:
1-get this tool Desire_V_All-In-One_Kit_v1.0 from xda http://forum.xda-developers.com/showthread.php?t=2077774 and unpack it in "Android" folder in Drive C of your laptop
2-put your Desire V in Bootloader then plug it in, assuming you already installed the necessary drivers
3-click "Desire V.exe" from above tool
4-unpack your Baidu version then take "boot and Recovery" from it and copy them to "windows" folder of Drive C
5-click on "flash a kernel" from that exe then take "boot" from those two file you've got from Baidu pack. now you get the Baidu Boot.
6-, Unplug, reboot gadget into Bootloader again
7-click on "flash your recovery" then pick up the Baidu recovery you had
8-when done boot into recovery wich will be in chinese. Don't panic, bu using Volume button down, pick up the second choice by pressing Power Button, then the second choice which will take you to your SD where you put the latest Baidu ROM, now press Power Button to install it. when done, press Power Button continuasly intil rebooting. wait for complete startup, then get into your Settings to change language into Englsih.
9-here is the latest version 41
http://bs.baidu.com/platform-rom/102/T328W/T328W_R_2.1.41.121_102_2013-12-29_22-44-02.zip
Enjoy
FFB ( Fast From Birth ) ICS ROM
This is my first work so go easy people and test it slowly, i've only tested on Sony Ericsson Live with Walkman so leave feedback about other devices too !
It is based on the ICS 4.1.b.0.587 version of android ! It is prerooted !!! All you need to do is grab the busybox app from the Play Store and install it and !! POOF !! you're ready to go
Useless apps and frameworks has been ripped off ( Generally it's a fully debloated Stock ROM ), only basic apps, wallpapers and Radio has been left untouched. I suggest running the V6 Supercharger Script after installing this so that you get the full possible boost. Also all apps were optimized with GOptimize v1.24 from gu5t3r.
WARNING
This ROM was created for performance and simple phone use so don't expect fancy things like Event Stream or other flashy apps in it !!!
Now...off to the GOOD part
You have 2 choices:
1) Either install this on a locked bootloader and lose the init.d support...( there is a way to install a " bypass " init.d support !!! Justa search for " Universal init.d support " in the Play Store and there you go
or
2) Install this on an unlocked bootloader in addition with the provided kernel and enjoy full init.d support
Just to be clear here...this kernel is full Stock except the init.d support ! ! ! !
That means NO RECOVERY, you'll have to install your own recovery ! ! ! !
Many thanks to:
Knight47 ( For the awesome ftf to flashable zip guide ) ( http://forum.xda-developers.com/showthread.php?t=1849867 )
alireza7991 ( For the init.d support on kernel tut ) ( http://forum.xda-developers.com/showthread.php?t=2287540 )
gu5t3r ( For GOptimize BASH Script ) ( http://forum.xda-developers.com/showthread.php?t=2358261 )
Some FINAL details:
a ) If you want recovery you can try ROM Manager from Play Store to install the CWM Recovery on your phone OR you can use flashtool to '' temporarily '' flash a kernel with recovery on then boot on that recovery and install the recovery of your choice (ooofff too much '' recovery '' ) there are plenty tuts on how to do that so Google is your friend ( All that considering you have an unlocked bootloader )
b ) If you want ANY of the original apks to use it just request it and i'll provide ASAP with instructions on how to install it ( if you need it and that includes removed frameworks too ! ! ! ).
This is the " V6 SUPERCHARGER " script made by zeppelinrox : http://forum.xda-developers.com/showthread.php?t=991276
Miracle-worker script especially for STOCK based ROMs.
This is the link from Play Store to the ROM Manager if you want recovery on: https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
AND DON'T FORGET: https://play.google.com/store/apps/details?id=stericson.busybox
the Busybox app to get busybox on your device and run this ROM like a boss
ENJOY AND PLS GIVE FEEDBACK
Download links:
ROM: FFB(FastFromBirth)[ICS-DeBloated].zip - 135.33 MB
Kernel: boot.img - 4.62 MB
XDA:DevDB Information
FFB ( Fast From Birth ) ICS, a ROM for the Sony Ericsson Xperia Live with Walkman
Contributors
JimieTheFox
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 2.6.x
Based On: STOCK ICS
Version Information
Status: Testing
Created 2013-09-30
Last Updated 2013-09-30
No Rom Should Be On General Section
Please post the rom in the development forum
Just report the thread and ask the mod to move it or PM any mod with your issue
Sent from my Nexus 4 running Android 4.3
Ok it may sound stupid but how do i delete this ? I copied it to Developement but i can't delete it from General now ? :\
JimieTheFox said:
Ok it may sound stupid but how do i delete this ? I copied it to Developement but i can't delete it from General now ? :\
Click to expand...
Click to collapse
Report the thread (click the orange triangle on your post) and tell the mod to delete it
But your post was already reported and so just wait for a decision by the mods
Sent from my Nexus 4 running Android 4.3
Ok thank you
Updated Stock ROM Tweaked Micromax A116/A116i
(Version 1.0A)
Tweaked + Deodexed + Rooted
Both Flash Versions: TWRP/CWM (Flashable Zip) and SPTOOLS (Flash_Tool)
For A116, A116i, FLY IQ451, MYphone919i, Wiko Cink-5, Qmobile A600
This is completely fresh stock ROM extracted and built by me
from scratch from latest SPTOOLS version
S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER
of Factory Stock of A116i V2 link found at moulinsky (gsm-forum)
Click to expand...
Click to collapse
Available to be used as BASE rom for porting, feel free to use it, but with necessary credit
** More bloatware will be removed and some more tweaks to be added after testing for few days **
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google play store or other features of stock apps in stock is from original stock (Oct or Nov 2013) and when you flash rom and connect internet, the play store or other things should get updated automatically. This is tweaked Factory Stock and not a custom rom which are updated on regular basis.
I have made this for ...
(1) users who want to restore to original stock in case of brick or bootloop and may be who lost recovery too in worst case scenario (sptools version)
(2) users who want to use original stock but with great tweaks I have implemented. (cwm version)
(3) devs who want to use a good build of stock for making custom roms or porting.
Features:
Two versions: Normaland Fully Tweaked Stock ROM for A116i and A116
Louder Sound
Fast Network Speed (Browsing)
WiFi Fast connect
Also for FLY IQ451 / MYphone919i / Wiko Cink Five / Qmobile A600
This rom uses Stock Kernel
WORKING OTA UPDATE
Rooted Stock
Busyboxed
Deodexed
Zip-Aligned
Super Smooth
Super Responsive Touch
Great Battery Backup.
Everything Original Stock Apps
Lighter Sony Bravia 2 Tweaks
MMX Registration , Games and Bloatware removed (more will be removed soon)
Init.d support with small app (check Addon section below)
Option to install 4.3 camera or revert back to stock 4.2 (check Addon section below)
Built from A116i : MMX Build ver: S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER
Note:
Please do not tell me its same stock rom as before, I know that. But this tweaked version and is much better than any previous stock roms
Try it and post feedback.
Installation:
Copy zip on sdcard
Reboot to recovery CWM/TWRP
Do Full Factory Reset (Full Wipe)
Flash Rom and reboot. Done!
Bugs:
A minor bug: Shows Blank wallpaper at first boot. Just select any new wallpaper and reboot. Done!
Many Download Options:
Rooted , Busyboxed , Fully Tweaked , Deodexed , Zip-Aligned, Bloatware removed version.
DOWNLOAD
**This is CWM/TWRP version for all.
.
Unrooted, Factory Raw Stock (odexed) , No apps removed, Not tweaked (AS IS).
DOWNLOAD
**This is CWM/TWRP version for anyone who wants to experiment with original rom (Not for everyone)
.
SPTOOLS version ROM with (TWRP 2.5.0.0) and SPTOOLS (SP_Flash_Tool_v3.1304.0.119)
DOWNLOAD
** Download this version. Do not download original version given below
** SPTools Installation Instructions in second post below.
.
Original SPTOOLS version ROM directly from original moulinsky site (with blank stock recovery)
DOWNLOAD
** Do not download this version.
** SPTools Installation Instructions in second post below.
Addons/Patches/Mods:
Init.d Support: Install Univ_init.d_enabler.APK. Click on "Activate" & Done! Tested OK! (refer post)
(*Optional and for advanced users only, who want to experiment with mods made for init.d folders. Everyone else can ignore this patch.)
Flash Stock 4.2 Camera: Download (if you need the original one) 1088p video recording.
*Optional
Flash Stock 4.3 Camera: Download (the one which is included in this rom)
*Optional
UPDATED KITKAT4 LAUNCHER COMBINATION by CMahendra for SLD Rom (Download and Install from here) (NEW)
*Optional App. *Only launcher, no additional apps included.
(WARNING: Use at your own Risk. You lose warranty of device. I am not responsible for your bricked phone.)
XDA:DevDB Information
[ROM] Tweaked Micromax A116i Factory Stock Deodexed Rooted [BASE], a ROM for the Micromax A116
Contributors
cmahendra
Version Information
Status: Testing
Created 2014-01-03
Last Updated 2014-01-03
INSTRUCTIONS FOR FLASHING VIA SPTOOLS METHOD
==============================================
Please Read carefully.
Using Flash Tools to Flash TWRP/CWM Recovery to A116
Requirements:
TWRP/CWM Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)
Steps To Follow:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
==========================================
Hope this helps.
==========================================
TWRP 2.5.0.0 :
Included in third download or here
CWM 6.0.3.3 :
http://www.mediafire.com/?hk5guk5f8a0xu4x
Mt6589 Scatter File :
http://db.tt/JjMl15wO
SP Flash Tool v3.1304.0.119 :-
http://d-h.st/Dmi
Drivers:-
http://www.mediafire.com/download.php?nv96xclhjmaiclu
64bit drivers:-
http://forum.xda-developers.com/show....php?t=2206421
*TWRP 2.5.0.0. is flawless tested working.
*CWM 6.0.3.3 is also good.
Credits: Instructions and links from Kumar Abhishek's old post. Thanks dude!
INSTRUCTIONS FOR FLASHING VIA SPTOOLS METHOD
==============================================
Please Read carefully.
Using Flash Tools to Flash TWRP/CWM Recovery to A116
Requirements:
TWRP/CWM Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)
Steps To Follow:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
==========================================
Hope this helps.
==========================================
TWRP 2.5.0.0 :
Included in third download or here
CWM 6.0.3.3 :
http://www.mediafire.com/?hk5guk5f8a0xu4x
Mt6589 Scatter File :
http://db.tt/JjMl15wO
SP Flsh tools:-
http://mtk2000.ucoz.ru/down7/FT3.13.04.rar
Drivers:-
http://www.mediafire.com/download.php?nv96xclhjmaiclu
64bit drivers:-
http://forum.xda-developers.com/show....php?t=2206421
*TWRP 2.5.0.0. is flawless tested working.
*CWM 6.0.3.3 is also good.
Credits: Instructions and links from Kumar Abhishek's old post. Thanks dude!
Can't set the wallpaper, only a black background.. plz fix.
Sent from my Micromax A116 using xda app-developers app
4.2.1 or 4.2.2??
Sent from my A116 using XDA Premium 4 mobile app
jsacool91 said:
Can't set the wallpaper, only a black background.. plz fix.
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
Dont worry, setup the wallpaper and reboot. A minor thing remained. Will fix in next update.
tandevilz said:
4.2.1 or 4.2.2??
Click to expand...
Click to collapse
Original stock is still 4.2.1.
They have not released 4.2.2 yet.
stock 4.3 camera, does it replaces the cam application or add another 1...
iam on MIUI rom and wanted to try the 4.3 camera for that..
Plz tell me hw to revert if i mess up with it....
ravi776 said:
stock 4.3 camera, does it replaces the cam application or add another 1...
iam on MIUI rom and wanted to try the 4.3 camera for that..
Plz tell me hw to revert if i mess up with it....
Click to expand...
Click to collapse
Camera 4.3 Patch is made only for stock and it replaces the 4.2 or vice versa. I dont know what will happen with MIUI.
1) Firstly, I will suggest "Dont try".
2) Secondly, if you still want to "Try at your own risk" after taking nandroid backup
3) Do whatever you want to man, coz phones do not explode on faces for any misadventure.
cmahendra said:
Camera 4.3 Patch is made only for stock and it replaces the 4.2 or vice versa. I dont know what will happen with MIUI.
1) Firstly, I will suggest "Dont try".
2) Secondly, if you still want to "Try at your own risk" after taking nandroid backup
3) Do whatever you want to man, coz phones do not explode on faces for any misadventure.
Click to expand...
Click to collapse
:good::good::good: LOL thnx....
Thanks for the amazing ROM. followed all the steps and got all the features. thanks a lot again. (i've pressed the thanks button as well )
P.S Google play store is not working. I am not getting FCs or something. It's just not loading anything. It just keeps searching and does not show anything. Tried on both WiFi and 3G. Help please.
archer_love12 said:
Thanks for the amazing ROM. followed all the steps and got all the features. thanks a lot again. (i've pressed the thanks button as well )
P.S Google play store is not working. I am not getting FCs or something. It's just not loading anything. It just keeps searching and does not show anything. Tried on both WiFi and 3G. Help please.
Click to expand...
Click to collapse
Sorry for late reply. Google play store in stock is from original stock (Oct or Nov 2013) and when you flash rom and connect internet, the play store should get updated automatically. This is tweaked Factory Stock and not a custom rom which are updated on regular basis.
I have made this for
(1) users who want to restore to original stock in case of brick or bootloop and may be who lost recovery too in worst case scenario (sptools version)
(2) users who want to use original stock but with great tweaks I have implemented. (cwm version)
(3) devs who want to use a good build of stock for making custom roms or porting.
Hi, an absolute newbie here looking for custom ROMs for my Canvas A116 and your ROM looks like the best option. I had a couple of questions:
1. By "Stock ROM" do you mean it is the pure Google Android found on their Nexus devices? If not, are there any such ROMs for my device?
2. By "Working OTA Update" do you mean I can get future versions of Android (like Kitkat) OTA?
Thanks!
shishirdbhat said:
Hi, an absolute newbie here looking for custom ROMs for my Canvas A116 and your ROM looks like the best option. I had a couple of questions:
1. By "Stock ROM" do you mean it is the pure Google Android found on their Nexus devices? If not, are there any such ROMs for my device?
2. By "Working OTA Update" do you mean I can get future versions of Android (like Kitkat) OTA?
Thanks!
Click to expand...
Click to collapse
By stock ROM he means what OEM MMX has provided with no modifications, if ur looking for nexus style I suggest u can either try superluminadad or oppo r819 stock the earlier is themed aosp android where as the latter is built by oppo as an aosp n ported
2nd question yes thats what he means quite directly
Sent from my Micromax A116 using Tapatalk
Further clarifications required
bharat_goku said:
By stock ROM he means what OEM MMX has provided with no modifications, if ur looking for nexus style I suggest u can either try superluminadad or oppo r819 stock the earlier is themed aosp android where as the latter is built by oppo as an aosp n ported
2nd question yes thats what he means quite directly
Sent from my Micromax A116 using Tapatalk
Click to expand...
Click to collapse
Could you please clarify further?
1. I don't want "Nexus Style", rather a pure Android experience (AOSP) without any OEM customization. Simply put, I want the Google Nexus experience on my Micromax device. I will check out "Oppo R819", I remember reading that Oppo is pure Android.
2. Are the updates pushed by the dev of this ROM or by Google itself?
Thanks for your responses.
shishirdbhat said:
Could you please clarify further?
2. Are the updates pushed by the dev of this ROM or by Google itself?
Click to expand...
Click to collapse
OTA update will be provided by OEM i.e Micromax not by dev
@bharat_goku for your help
shishirdbhat said:
Could you please clarify further?
1. I don't want "Nexus Style", rather a pure Android experience (AOSP) without any OEM customization. Simply put, I want the Google Nexus experience on my Micromax device. I will check out "Oppo R819", I remember reading that Oppo is pure Android.
2. Are the updates pushed by the dev of this ROM or by Google itself?
Thanks for your responses.
Click to expand...
Click to collapse
1) BTW I have just released the amazing fast and smoother Final Version of SuperLuminalDAD rom and its a heavily tweaked and tested bugless version of of a rom based on AOSP rom from other model. The rom is very lightweight and all craps are removed.
Don't only think about looks, consider features also. Custom roms are made to work smoother, faster, no-lags, double triple time battery backup. All these features are "always" missing in stock roms. Some stock roms even force close with many apps installed but they work without problem in custom roms.
We don't know what is in your mind (may be you are still scared to flash as you said you are "absolute" newbie). By any chance if you make a mind to flash any other rom then its best to know its features first and if you like them flash and experience them. Otherwise you can go back to stock.
2) This thread is exact copy of factory stock roms of A116 from Micromax (not Google) and OTA comes always from Manufacturer of your Rom based on its hardware configuration.
Why GOOGLE will send OTA for 4,915,298,928 models of phones all over the world from various manufacturers? Google only sends OTA for its own Nexus series and few nexus models from LG, etc.
PS: When anyone mentions "Factory Stock Rom" in xda, generally he/she means the Official Rom from manufacturer of the exact model of the phone and not google.
cmahendra said:
@bharat_goku for your help
1) BTW I have just released the amazing fast and smoother Final Version of SuperLuminalDAD rom and its a heavily tweaked and tested bugless version of of a rom based on AOSP rom from other model. The rom is very lightweight and all craps are removed.
Don't only think about looks, consider features also. Custom roms are made to work smoother, faster, no-lags, double triple time battery backup. All these features are "always" missing in stock roms. Some stock roms even force close with many apps installed but they work without problem in custom roms.
We don't know what is in your mind (may be you are still scared to flash as you said you are "absolute" newbie). By any chance if you make a mind to flash any other rom then its best to know its features first and if you like them flash and experience them. Otherwise you can go back to stock.
2) This thread is exact copy of factory stock roms of A116 from Micromax (not Google) and OTA comes always from Manufacturer of your Rom based on its hardware configuration.
Why GOOGLE will send OTA for 4,915,298,928 models of phones all over the world from various manufacturers? Google only sends OTA for its own Nexus series and few nexus models from LG, etc.
PS: When anyone mentions "Factory Stock Rom" in xda, generally he/she means the Official Rom from manufacturer of the exact model of the phone and not google.
Click to expand...
Click to collapse
Thanks
1. Your SLD ROM looks great, I think I'll go for that. Dunno why I didn't see it before, it was right there in your signature BTW, I noticed it doesn't have the OTA feature, so when you release the next version of SLD, will I have to re-flash my device?
2. "Why GOOGLE will send OTA for 4,915,298,928 models of phones all over the world from various manufacturers?" :laugh:
Now that you mention it, it seems so obvious. I had this impression that Google puts out Android releases, OEMs put their crapware on top of it and make some UI changes and release it to us. So, I was looking for a ROM which will give me the latest Android version directly from Google... my mistake.
Thanks again for your responses.
shishirdbhat said:
Thanks
1. Your SLD ROM looks great, I think I'll go for that. Dunno why I didn't see it before, it was right there in your signature BTW, I noticed it doesn't have the OTA feature, so when you release the next version of SLD, will I have to re-flash my device?
2. "Why GOOGLE will send OTA for 4,915,298,928 models of phones all over the world from various manufacturers?" :laugh:
Now that you mention it, it seems so obvious. I had this impression that Google puts out Android releases, OEMs put their crapware on top of it and make some UI changes and release it to us. So, I was looking for a ROM which will give me the latest Android version directly from Google... my mistake.
Thanks again for your responses.
Click to expand...
Click to collapse
@shishirdbhat I am glad you asked questions. Many good people like @bharat_goku here are keen to answer questions and help new pals. Thanks to all.
1) SLD is like a base for everyone, from minimum user to heavy app users. Lots of free memory and longest battery backup. It doesn't have OTA feature, but now the Final version is released, there will be very few occassional updates and not any major one. I provide small flashable zip updates, which you can flash when you want to. Otherwise this is perfectly worked out version. If you try it, leave feedback.in SLD thread, NOT HERE.
2) Android is Open Source Project (AOSP) by Google and other manufacturers use it with various hardware customizations of their various models with FLASHY UIs and thousand other things on their own. Manufacturers like Samsung are successful for their unique UI and added features. You will learn a lot from various people on xda. Just keep visiting. Good Luck.
Installed the tweaked a116i....its really stable and lite. Touch is also quite responsive. Just one query I have if we can increase the sound abit more. Before this rom i was using the xperia rom and the sound was amazing. Keep up the gr8 work. Cheers:thumbup:
Sent from my Micromax A116i using Tapatalk 4
shub_hi said:
Installed the tweaked a116i....its really stable and lite. Touch is also quite responsive. Just one query I have if we can increase the sound abit more. Before this rom i was using the xperia rom and the sound was amazing. Keep up the gr8 work. Cheers:thumbup:
Click to expand...
Click to collapse
There is an option in Developers Mode, to increase a volume little bit than normal. But it should be done carefully. With wrong settings there is risk of blowing the speaker. In tweaked version the sound is pretty clear and marginally better than normal. Still we can't expect the LOUDEST volume like unbranded chinese phones from branded chinese phones
New Custom z7max ROM by BB72 & Cuoco92****
COMBO ROM Android L per Nubia Z7 Max
there are several versions all labelled as beta
all are multi lang and have g apps
COMBO ROM BETA1 Based on 3.09 UI 2.9
COMBO ROM BETA2 Based on 3.09 UI 2.9
COMBO ROM BETA1 Based on 3.15 UI 3.0
I am using the last one. very smooth. no issues as of yet. both sim working well.
this ROM ONLY for the new Android 5 file system
meaning MUST use Nubia android tool to update the file system this totally erases everything on the phone so
BACK UP BACK UP BACK UP ---- INCLUDING IMEI
(I recommend titanium. if doing nandroid backup it will be in the OLD file system so if your transition to new filesystem fails
will need to use Nubia tool to downgrade to old file system.)
Full credit and kudos to BB72 for his EXCELLENT work on this device
Link (in Italian can use google translate) to Androidiani Forums
http://www.androidiani.com/forum/zt...-bb72-cuoco92-zte-nubia-z7-max-combo-rom.html
scroll down for links
one of his versions is also linked from needrom.com
finally - repeating my question does anyone know where nubiaforums disappeared to?
opening a browser to www.nubiaforums.com gets me to Welcome to nginx!
entdoc said:
finally - repeating my question does anyone know where nubiaforums disappeared to?
opening a browser to www.nubiaforums.com gets me to Welcome to nginx!
Click to expand...
Click to collapse
Same Question about nubia forums. not clear