hello.
Im trying to instal this rom.
i do wipe data, cache and dalvik cache.Format system and install zip.
thw phone doesnt reboor.......yellow triangle and turn off all the time.
can you help me?
santi666 said:
hello.
Im trying to instal this rom.
i do wipe data, cache and dalvik cache.Format system and install zip.
thw phone doesnt reboor.......yellow triangle and turn off all the time.
can you help me?
Click to expand...
Click to collapse
What are the instructions for installing the zip ???
As above try factory reset .
jje
the instructions are this:
1. Wipe data, cache and dalvik cache
2. Go to mounts and storage and format system
3. Flash Zip
Click to expand...
Click to collapse
I do it,exactly, some times.
the phone dont start, i show the yelow triangle screen and shut down (loop)
Flash another rom .
jje
All week I do a flash.
But I want this ROM.
Sent from my GT-I9100 using xda premium
Related
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
I flashed my S2 yesterday with CheckROM and I like it and everything but I'd like to try MIUI today but I'm not sure how I would go about this? I think I may have to wipe my phone (already have a backup from before I flashed with CheckROM) and then just install MIUI like I did CheckROM? Correct me if there is another way or I'm wrong.
Just go into clock work recovery, wipe data cache, flash miui.
Sent from my GT-I9100
MKULTRA- said:
I flashed my S2 yesterday with CheckROM and I like it and everything but I'd like to try MIUI today but I'm not sure how I would go about this? I think I may have to wipe my phone (already have a backup from before I flashed with CheckROM) and then just install MIUI like I did CheckROM? Correct me if there is another way or I'm wrong.
Click to expand...
Click to collapse
Wipe cache and Wipe Dalvik cache in recovery then flash your rom .
OR
...................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Miui formats system for you.
Sent from my GT-I9100
atifsh said:
Miui formats system for you.
Sent from my GT-I9100
Click to expand...
Click to collapse
By formats system do you mean wipes everything or just cache?
Let's see.......
You wipe data, cache but your phone can boot, because the OS remains.
You wipe system OS got removed, you can't boot phone.
Wiping system is the cleanest flash you can do.
Sent from my GT-I9100
hi i have galaxy sii gt i9100 everytime i flash a new rom or or update a rom using cwm and restart it my phone hangs at startup everytime and starts only when i wipe my data...any idea whats happening? plz help
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
jiffer1991 said:
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
Click to expand...
Click to collapse
happens with almost every rom...i've tried everything wipe data/factory reset, wipe cache, wipe dalvik nothing works!!
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
olawp said:
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
Click to expand...
Click to collapse
done that doesn't work!
Does it start normally after you wipe after you flashed?
I would try to flash stock 2.3.5 GB or 4.0.3 ICS with stock recovery and the flash cf root with odin.
Try this and then try flashing some roms
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
NocNoc9595 said:
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
Click to expand...
Click to collapse
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
bungknees said:
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
Click to expand...
Click to collapse
Is that considered a FULL wipe?
NocNoc9595 said:
Is that considered a FULL wipe?
Click to expand...
Click to collapse
No, full wipe is when you delete all user data as well.
bungknees said:
No, full wipe is when you delete all user data as well.
Click to expand...
Click to collapse
Ok I found the definitions of what a full wipe and no wipe is:
Full Wipe Install means:
- Wipe Data / Factory Reset
- Wipe Cache and Dalvik Cache
- Format System partition
- Install
No Wipe Install means:
- Wipe Cache and Dalvik Cache
- Install
Just a question, in the FULL WIPE listed above, where would I find "Format System Partition?" I don't recall seeing that..which category do I enter to do it?
CWM recovery mounts and storage format system .
jje
JJEgan said:
CWM recovery mounts and storage format system .
jje
Click to expand...
Click to collapse
Thanks, is there any harm if I do a full wipe EverytimeI upgrade an Omega ROM? I just want to stick to one way of things to minimize any issues.
I root my Phone With "CF-Auto-Root-m0-m0xx-gti9300"
I instal Recovery ( I try many recoverys CWM 5.xx 6.xx and TWRP ) All are working good
Everytime when I try to flash a custom rom with or without aroma all the proces are working good but when I rebot, the phone stay at samsung logo .(retry flash not help)
I can install just with Odin stock firmware.
In recovery i can instal diferent mods in stok firmware and that works good ,but when i try to instal a full rom ,custom rom ,after instal and rebut the phone stay at samsung logo
What i do wrong ? What can i do to be able to instal a custom rom ?
Please help
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
convict_moody said:
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for reply
I do what you said but i don't wait 15 - 20 min . I wait about 5 -10 minutes and i removed the battery
Recap . I understand that I should wait 20 minutes with the phone showing samsung logo ? Nothing else . Isn't it ?
boomboomer said:
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
Click to expand...
Click to collapse
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
mihaitosca said:
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
Click to expand...
Click to collapse
Yes, 5.18 doesn't flash properly for some reason.