There are many out there, who is wondering over why their vibration doesn't work on their ICS firmware.
So I decided to do a simple thread for the problem because the answer is so simple too.
1. Download Sound Manager/Sound Manager V2
2. Open the app you just downloaded.
3. Press the menu button on your device.
4. Press Vibrate Settings
5. Select Vibrate Whenever Possible (on both or just the one you want)
6. (Close app) Done!
Related
There are many out there, who is wondering over why their vibration doesn't work on their ICS firmware.
So I decided to do a simple thread for the problem because the answer is so simple too.
1. Download Sound Manager/Sound Manager V2
2. Open the app you just downloaded.
3. Press the menu button on your device.
4. Press Vibrate Settings
5. Select Vibrate Whenever Possible (on both or just the one you want)
6. (Close app) Done!
Hope I helped and If I helped please press the THANKS button:thumbup:
In no way did i write this. I stumbled onto this here http://forum.xda-developers.com/showthread.php?t=1794956 (many thanks AlpineMan btw) and have seen the question here in the Evo 3d section a few times and thought it was worth a share for those running a Sprint ROM and VM or Boost service. I did step one and it worked like a charm. And to me any fix is a good fix. Especially in the land of root phones.
Method 1 - (the real fix, but requires a rooted phone):
***UPDATE***
I've confirmed that this method works on Jellybean ( 4.2.2). Tested and working on VM Evo 3d
1a) Download this working Sprint APN xml file: https://www.box.com/s/40x5ac2c6u0ckzfz59ig (click on download button at the top)
OR
1b) For Boost, download this xml file: https://www.box.com/s/o9folfrq00ee9p2qj5pv (click on download button at the top)
OR
1c) For Virgin Mobile, download this xml file: https://www.box.com/s/9itl21drpp84enqeszc9 (click on download button at the top)
2) Download and install "APN Backup & Restore" from the Google Play Store to your phone: https://play.google.com/store/apps/d...pRestore&hl=en
3) Convert the "APN Backup & Restore" into a system app by either using Titanium Backup, or simply use Root Explorer/ES File Explorer (root enable it) to move the APK from /data/app to /system/app.
4) Reboot the phone.
5) Launch the app, click on menu, then click on "Disable ICS Check".
6) In the main app menu, click on "Backup APNs". This will create a directory called "ApnBackupRestore" in your /mnt/sdcard.
7) Copy the xml file from step 1 to the /mnt/sdcard/ApnBackupRestore folder.
8) Go back to the main app menu, click on "Delete APNs" and confirm it.
9) Go back to the main app menu, click on "Restore APNs".
10) Choose the file you downloaded from step 1 and confirm it.
11) Reboot your phone.
12) Done.
Method 2 - (work around, doesn't require rooted phone)
1) Download and install Go SMS Pro to your phone from the Google Play Store.
2) Launch Go SMS Pro and skip through the intro message screens.
3) Skip the Go Chat Service offer unless you really want that.
4) Press Menu button on your GS3.
5) Choose Settings.
6) Scroll down the menu and choose Set default SMS program.
7) Press each entry in the list and put a check mark on "Use by default for this action" then choose Go SMS Pro. When both are done, press the back button on your phone.
8) Up on top, press "Advanced"
9) Scroll down the list and press "MMS Settings"
10) Scroll down the list and put a check mark on "Fill APN configuration manually"
11) Press "MMSC".
12a) Type in "http://mms.sprintpcs.com" - do not include the double quotes. Press OK button.
OR
12b) Type in "http://mm.myboostmobile.com" for Boost
OR
12c) Type in "http://mmsc.vmobl.com:8088/mms?" for Virgin Mobile
13) Press "MMS PROXY".
14) Type in "68.28.31.7" (Sprint & Boost) OR "205.239.233.136" (Virgin Mobile) - do not include the double quotes. Press OK button.
15) Press "MMS PORT".
16) Type in "80" (Sprint & Boost) OR "81" (Virgin Mobile) - do not include the double quotes. Press OK button.
17) Press back button on phone twice.
18) Send/receive a few SMS/MMS messages to test.
19) Done.
Works for Kit KAt (4.4) too
Hey,
Method 1 works for Kit Kat 4.4.1. I'm on a VM evo 3d with the CyanogenMod 11.0 VILLUMINATI Rom
The only difference is the app has to be moved to the /system/priv-app folder for it to be able to acquire the correct permissions.
I also did step 3) with titanium backup, not sure if it helped or not.
Cheers.
Hi, I'm using sony xperia Z1 C6903, now the home and recent apps button on my phone is not working, I pressed but nothing happen, same with the lockscreen, even I set to PIN lock, after I unlock the screen, there is no PIN lockscreen, so my phone cannot be locked. I clear dalvik cache and wipe cache partition in recovery, but the problem did not disappear. How to fix this? Even in safe mode the button is not working too.
I'm using kitkat 4.4.2 14.3.A.0.757
and I found this on xda too, but my button still not working, the only working is the back button and menu.
for all those like me who have problems with the Home key (disappeared after flashing ROM or kernel), with the lockscreen and the poweroff button, and don't know how to use the ADB shell, here's a simple solution:
1) take the apk SQLite Editor from the Market;
2) using any root manager (I use Root explorer) follow this path: /data/data/com.android.providers/settings/databases/settings.db and open .db file with Sqlite;
3) select ''secure''
4) create a new record;
5) type device_provisioned (on name)
6) type 1 (on value)
7) reboot
Click to expand...
Click to collapse
up.. up.. up..
GT5830: CM11 GoogleMaps install error 961
Hi,
My Galaxy Ace GT5830 is running CM11
cm-11-20140326-NIGHTLY-cooper++.zip (http://forum.xda-developers.com/showthread.php?t=2587481)
It works fine... but I don't succeed in GoogleMaps installation.
Using PlayStore to install GoogleMaps, I get:
Code d'erreur inconnu lors de l'installation de l'application: "961"
Translated in english, it could be:
Unknown error code during application installation: "961"
What could I do?
Regards.
--
Stephane
PS: Sorry for the froggy way I write english.
Android Fix: ‘Unknown Install Error 961′
Here's how you fix Install Error 961:
Method 1: Clearing the cache and data normally
1) To do this, go into your phone’s settings, then Applications (or Apps or Application Manager), swipe to the left to ”All” and scroll down until you find Google Play, tap on it.
2) In the app information page, tap on the button to empty the cache.
3) If this doesn’t solve the problem, try to delete the data from the Play Store which is found on the same page (Settings > Manage applications > Google Play > Delete data). This will most probably work, since it had worked in my case when I suffered with the problem in my android.
unknown install error 961
Method 2: Go to recovery mode and try again
If the above simple method doesn’t solve your problem, then a more thorough option is to do a system cache clear on your android device. Follow the following steps:
1) Power off your phone.
2) Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
3) Use volume down to navigate to ‘Recovery’, use volume up to select. You should see screen with triangle and exclamation point next to an Android.
4) Press volume up/down simultaneously to go into system recovery.
5) Use volume rocker to navigate to ‘wipe cache’ and use power button to select
6) Once finished, use volume rocker to navigate to ‘reboot system now’ and use power button to select.
Source: http://appslova.com/android-fix-unknown-install-error-961/
Hey xda-developers,
It's me Gio, and I made a tutorial for you guys on how to get Android 5.0.2 on Samsung Galaxy Pocket Neo but then the correct way.
First of all, me or the developers that made this ROM and the developers who made the other stuff are not responsible for any damage, this is completely your choice if something screws up. I don't think that something will happen but you will never know what happens. And second, I would like to thank the developers (flex1911, MatheusAlves and the others who made the project).
Tutorial:
1. Make a backup of all your data that is laying in your device. Think for example about important text messages, contacts, photos, or something else.
2. Make sure that you will be able to restore that backup after. So put it in your microSD card or on the computer.
3. Download the new ROM from the link which you can locate below this tutorial.
4. Place it in your device and boot your device into TWRP or CWM. Personally I find TWRP much more handy but your choice.
5. Wipe data, cache and dalvik.
6. Flash this ROM and if you have any other zip to flash (like a Dolby extension or Google Apps), do it after flashing this ROM.
7. Wipe cache and dalvik one more time to avoid errors.
8. Reboot your device and wait till you see the homescreen.
9. Download Wake Lock and install it on your device. (If you are going to install it from APK4Fun for example, you probably need to accept unknown sources from Security in Settings).
10. Open Wake Lock when it is installed and tick the PARTIAL~WAKE~LOCK. This is important to avoid numerous reboots, don't forget to enable it again after every reboot since it may dropout when your turn off your device.
11. Download keylayout.rar from the link which you can locate below this tutorial.
12. Unrar it, and copy the keylayout folder to your device.
13. On your device, open up the Files app.
14. Go to the hamburger menu left above and then go to the gear icon which is the settings.
15. Go to General and then scroll to advanced, and then tick on the first setting of advanced and change it to root modus.
16. SuperUser is going to ask you for permission, accept it.
17. Locate now your keylayout folder and then copy the whole folder.
18. Go back to the hamburger menu and you will see home with under it this symbol "/", tick it and go then to /system/ and then /usr/.
19. You will probably notice that there is already a folder named keylayout, just do nothing with it, you will now paste the folder you copied earlier just there and if it askes to merge and overwrite, just accept it.
20. When it is done, reboot your device and your home button will work again.
Download links:
1. ROM
-- ht tps://goo.gl/KnXXsP
2. Google Apps
-- ht tps://itvends.com/gapps/gapps-lp-20141212-signed.zip
3. keylayout.rar
-- ht tps://goo.gl/l04S6x
4. Wake Lock
-- Google Play -> search for Wake Lock PowerManger
-- ht tp://dl3.apk-dl.com/store/download/details?id=eu.thedarken.wl
What works?
- EGL
- Touchscreen
- RIL
- Internal Storage and microSDcard
- Sensors
- Bluetooth
- Wi-Fi
- Camera
- Hardware keys (after changing keylayout)
- Wi-Fi tethering
- Audio
What does not works?
- Microphone
- Mobile Data (2G and 3G)
- and some more stuff but did not across them
Thanks for reading and I hope that you are helped after reading this. Again, if you want to thank me, only do it for the cleared up tutorial, the people who made the ROM and the fixes are the ones who you should thank actually!
Whuuuuu
Thank you man !!
but this Rom is different from Flex rom !?
waiting for the stable version
we want to fix the sound recorder problem :'(
waiting for more success : الضحك:
Well, something it's something. Do you have can fix any other bug? Like the problem with theming or App2sd, you should also find a solution to those bugs.