My phone is in an endless boot loop where it wont boot into the ROM. Everytime it's powered on, it goes straight to recovery. When I relock the bootloader to try and restore with the RUU, it says "security warning" and the RUU restore fails for a signature. I searched and couldnt find a similar problem. It fails for both 605.6 and 605.11 RUU's.
EDIT: Also, in recovery, I get this error Cant mount /dev/block/mmcblk0p36 (File exists)
hellhawk741 said:
My phone is in an endless boot loop where it wont boot into the ROM. Everytime it's powered on, it goes straight to recovery. When I relock the bootloader to try and restore with the RUU, it says "security warning" and the RUU restore fails for a signature. I searched and couldnt find a similar problem. It fails for both 605.6 and 605.11 RUU's.
EDIT: Also, in recovery, I get this error Cant mount /dev/block/mmcblk0p36 (File exists)
Click to expand...
Click to collapse
What rom were you on, what kernel did you install and I am not familar with those RUU's is that the complete name. The pre ota RUU started with 1.02.6xxxx..the after OTA RUU started with 2.xxxxxxx
Lol. You gotta flash the boot.img probably.
Sent from my HTC Rezound™ using XDA Premium
What mainver are you on? You can check in fastboot:
fastboot getvar all
If you are on 1.x or 2.x RUU should work.
If you are on 3.x you'll have to do a fix for that. If you go to the thread for Awesome Recovery Tool it should automate it for you. Then you'll probably need to get one of the stock OTA ROMs instead of using the RUU.
That security warning tells you you aren't on the official ROM or something similar, don't worry about that.
But first... if you can unlock the phone again, see what happens, that factory resets. Unless you'd rather run the RUU, it will definitely give you a fresh start as it really wipes the phone, so make sure you don't need anything off it.
You are getting security warning when trying to ruu because you have to relock.
Fastboot OEM lock.
Then ruu
Sent from my ADR6425LVW using XDA App
andrewp3481 said:
Lol. You gotta flash the boot.img probably.
Sent from my HTC Rezound™ using XDA Premium
Click to expand...
Click to collapse
I made a nandroid as soon as I was rooted and flashed the backup system.img and boot.img. Now it's stuck at the white HTC screen.
feralicious said:
What mainver are you on? You can check in fastboot:
fastboot getvar all
If you are on 1.x or 2.x RUU should work.
If you are on 3.x you'll have to do a fix for that. If you go to the thread for Awesome Recovery Tool it should automate it for you. Then you'll probably need to get one of the stock OTA ROMs instead of using the RUU.
That security warning tells you you aren't on the official ROM or something similar, don't worry about that.
But first... if you can unlock the phone again, see what happens, that factory resets. Unless you'd rather run the RUU, it will definitely give you a fresh start as it really wipes the phone, so make sure you don't need anything off it.
Click to expand...
Click to collapse
I'm on 2.01.605.11. I can unlock and relock the phone without a problem, but where it should factory reset, it doesn't and boots and stays stuck on the white HTC screen.
nosympathy said:
You are getting security warning when trying to ruu because you have to relock.
Fastboot OEM lock.
Then ruu
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Problem with that is that when I relock and launch the RUU, it fails for error 132: signature error.
I was able to fix my problem by extracting the firmware.zip file inside otapkg.zip, renaming it to ph98img.zip, installing it in hboot and then flashing Amon Ra recovery and installing a custom ROM.
Related
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
tomtripp21 said:
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
Click to expand...
Click to collapse
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
antp121 said:
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
Click to expand...
Click to collapse
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
tomtripp21 said:
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
Click to expand...
Click to collapse
Its OK. And once you unlock, it'll reboot. Then you just go back into the boot loader and flash a recovery with fast boot.
Sent from my aokp_tenderloin using Tapatalk 2
So got the recovery flashed, but now it only boots into the recovery.
tomtripp21 said:
So got the recovery flashed, but now it only boots into the recovery.
Click to expand...
Click to collapse
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
i tried to restore my backup that didn't work, I haven't tried a new ROM yet. I'll try that and get back to you. Thanks again for all your help.
antp121 said:
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
tomtripp21 said:
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
Click to expand...
Click to collapse
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
[Q] Can only get into recovery after attempting Juopunutbear S-OFF
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
jtayag said:
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
Click to expand...
Click to collapse
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
topgun1953 said:
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I successfully flashed one of the stock ICS ROMs! What got me all confused to begin with was the prerequisite that I had to be on a stock Gingerbread ROM or the 3.14.605.5 ICS leak. That's why I tried flashing the original Vigor GB ROM on my phone. I still want to get S-OFF, but I need to read the instructions more carefully. Thanks for your help!
dragonstalker said:
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
Click to expand...
Click to collapse
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
tomtripp21 said:
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
Click to expand...
Click to collapse
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
dragonstalker said:
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
Click to expand...
Click to collapse
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
tomtripp21 said:
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
Click to expand...
Click to collapse
I have now tried to flash the .12 RUU in Hboot but it will not flash it, probably because my firmware is newer right? Back to the drawing board....
Still to no avail I am getting nowhere. I flashed the stock recovery and did a factory reset from Hboot. Nothing, I have tried flashing the newest RUU, nothing, I'm flashed back to ra-recovery. Can anybody give me a solution step by step to get a ROM loaded and booting?
Well I finally got it up and working. I loaded the old firmware and was able to restore by backup. Thanks to all who chimed in with helpful advice. I'm hesitant to retry the Global update, but I might go ahead and give it another shot.
Glad you figured to restore the firmware. It's not hard to flash the global. Run the firmware, then run the recovery then flash Rom. Do it right in that order n you don't have any issues. Use 2 sdcards if you need to because the firmware upgrade won't delete the ph98 off your card. You will need to do it manually.
Sent from ICS REZOUND S-OFF
So just got the phone yesterday and I wanted to S-off immediately. Me being the idiot I am I fully rooted through fireballas method rather than temp-rooting and that messes up dirtyracun. So I need to flash the stock RUU again. I re-locked my phone and tried flashing the RUU and each time I get "FAILED (remote: 99 unknown fail)". Maybe I'm missing something here. How do I flash back to stock?
Are you following the instructions on the unlimited.io website? Because all you need to do is run the fastboot command and it should run just fine.
Sent from my ADR6410LVW using xda app-developers app
Ikikaea said:
So just got the phone yesterday and I wanted to S-off immediately. Me being the idiot I am I fully rooted through fireballas method rather than temp-rooting and that messes up dirtyracun. So I need to flash the stock RUU again. I re-locked my phone and tried flashing the RUU and each time I get "FAILED (remote: 99 unknown fail)". Maybe I'm missing something here. How do I flash back to stock?
Click to expand...
Click to collapse
after you get that error retype the command and it will go though. all part of the process
fastboot flash zip RUU.zip.
Aldo101t said:
after you get that error retype the command and it will go though. all part of the process
fastboot flash zip RUU.zip.
Click to expand...
Click to collapse
No matter how many times I try it won't flash. I figure it's the TWRP recovery or the root that's causing the problem. I must be missing something since I should be able to flash back to stock.
Ikikaea said:
No matter how many times I try it won't flash. I figure it's the TWRP recovery or the root that's causing the problem. I must be missing something since I should be able to flash back to stock.
Click to expand...
Click to collapse
It is most likely the custom recovery that is the problem. Flash the stock recovery (found HERE), then try the RUU again.
Good news! A factory reset and redownloading the RUU.zip fixed the problem. I have my theories on what was messed up, but I'm just glad it worked out in the end. Thanks to all the people who tried to help.
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
What happens when you try to run ruu
Sent from my EVO using xda app-developers app
PathogenVirdae said:
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
Click to expand...
Click to collapse
Update your twrp to 2.3.3.0 or if you want to return to stock you have to relock your bootloader
Sent from my PoS MoPho
TWRP won't take the update for whatever reason, and I can't get fastboot to work over this machine, so I'm thinking about running linux to get into the phone a little easier (hopefully.) I either have to wait til I can use my roommates machine, or start installing a dual boot
Have you tried goomanager to update twrp?
Yea, it downloads the file, gives a message stating it has been installed, then it does nothing. No reboot. when I manually reboot into recovery, it still sits at previous version.
Do you have adb setup on your PC? Also do you have the correct drivers installed ?
#Root-Hack_Mod*Always=SG3
Ok, so finally got my fastboot to work
"Fastboot oem lock"
Worked. Awesome...now it's stuck in a bootloader loop. Won't let me into recovery, but I can still get to fastboot. I can't get to recovery, factory reset, etc. just hboot and fastboot.
screen shows tampered relocked and security warning.
Any ideas? I can get it to flash the PJ75IMG.zip but it says main version is older! or something to that effect and it fails. Any ideas?
UPDATE: Got it unlocked again and it booted back into OS.
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
PathogenVirdae said:
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
Click to expand...
Click to collapse
Did you fastboot flash the stock recovery after you relocked?
bigdaddy619 said:
Did you fastboot flash the stock recovery after you relocked?
Click to expand...
Click to collapse
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
PathogenVirdae said:
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Click to expand...
Click to collapse
Well since you are s-on you can't flash PJ75IMG files from bootloader if you want to update your phone to the latest OTA you have to relock your bootloader and reflash the stock recovery and take the OTA then unlock and flash twrp again.
If you click the link in my sig and download the 3.15/2.09 hboot file there is a stock recovery in the files as well as instructions on how to flash it
Sent from my PoS MoPho
---------- Post added at 09:19 AM ---------- Previous post was at 09:15 AM ----------
mrlakadaddy said:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Or this ^^^^ a much better choice
Sent from my PoS MoPho
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
PathogenVirdae said:
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
Click to expand...
Click to collapse
There is a stock recovery on the files I recommend as well as the commands to use
Sent from my PoS MoPho
So I'm trying to run the Dirty Racun method, and I'm sitting at this part "sudo ./fastboot flash zip RUU.zip"
How long should this normally take? The only thing I can see is Sending 'zip' (filesize) and htc on the phone. Does this process take awhile? >20 mins? Is there some kind of progress meter?
Update:// So apparently I'm stuck. DirtyRacun seems to hang on the RUU flash. BigDaddy, it also stops half way thru the stock recovery flash.
So I have a problem with my phone randomly rebooting, so I am trying to run the stock RUU to make sure it is nothing I did. The problem is that when I do this I get to the step were the phone is supposed to go to the bootloader and it just shows a black screen with the HTC logo. Any idea what I should try next?
Have you re-locked your bootloader and installed a stock recovery?
How do I do that without the ruu
Sent from my EVO using xda app-developers app
You have to be re-locked for the RUU to work.
fastboot oem lock
Try this script thanks to viperboy
http://forum.xda-developers.com/showthread.php?t=2197909
Good luck!
Sent from my EVO using xda app-developers app
The script hangs at starting ruu mode
RUU not working on Evo Jewel
kevinb99 said:
The script hangs at starting ruu mode
Click to expand...
Click to collapse
Did you ever figure this out? I have the same problem, and I too have tried the Vipe utility. It does flash the recovery in the batch file, but RUU fails. I have tried all RUU's from androidfiles for the jewel and they fail to with an unknown error. I cannot get any custom roms to flash either, they fail altogether or they flash but never get past they HTC screen. I can still boot into recovery and I have also tried relocking the bootloader.
jseibert81 said:
Did you ever figure this out? I have the same problem, and I too have tried the Vipe utility. It does flash the recovery in the batch file, but RUU fails. I have tried all RUU's from androidfiles for the jewel and they fail to with an unknown error. I cannot get any custom roms to flash either, they fail altogether or they flash but never get past they HTC screen. I can still boot into recovery and I have also tried relocking the bootloader.
Click to expand...
Click to collapse
No, that sucks, I was able to get stock rooted on and have since gotten 5 replacement phones.
Got RUU working
kevinb99 said:
No, that sucks, I was able to get stock rooted on and have since gotten 5 replacement phones.
Click to expand...
Click to collapse
So your problem is with the phone rebooting still? I was having trouble installing the RUU and it seems so have a lot of people. The boot loader does need to be locked, that was one of my problems. I'm also pretty sure I wasn't using the correct RUU, as I tried so many. Vipe doesn't work but will at least push a recovery. I re-locked the bootloader, and tried one last RUU and it worked.
When I tried flashing the phone originally, something went wrong. TWRP wouldn't install any Roms at all even when some completed successfully. It would just hang at the HTC screen. I could probably go back and try it again but I'm done. I won't touch another HTC phone as far as flashing goes.
I have been having the worst time trying to take my Rezound back to stock. I rooted it a long while ago and am now stuck. I was able to relock but still at s-on and I cant seem to find the right RUU exe file to load the system back to stock. Current info is as follows;
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Image version 3.14.605.12
I am a complete noob so I will need as much simple directions as possible. I am desperate at this point since I cant seem to get it to reload the stock. Every time I use the RUU.exe files
RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9K_release_270509_signed.exe
Found on androidfiles.org/ruu/?developer=Vigor or any of the other ones it fails. Fortunately I have not bricked the phone yet but I am running out of options since android police site has one but says not to use it : This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off (method).
Help please!!!
Try this link here http://shipped-roms.com/index.php?category=android&model=Vigor and download the PH98IMG_ICS_3.14.605.12.zip! Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Okay I am kinda stupid at the moment since I have fried my brain trying everything. How do I flash it? and will that brick my phone since I am S-on?
Beyond5150 said:
Okay I am kinda stupid at the moment since I have fried my brain trying everything. How do I flash it? and will that brick my phone since I am S-on?
Click to expand...
Click to collapse
After you rename it place it on the root directory of the SD card. Then power phone off. Then press volume down + power so it boots into bootloader. There it should ask if you want to update. Tell it yes. It won't brick you as its the same s/w you seem to be on. Worst case it won't flash.
Edit: make sure you verify the md5!
Sent from my ADR6425LVW using xda premium
What message do you get when running the RUU, also what Rom were you running prior to relocking?
Sent from my ADR6425LVW using xda app-developers app
My rezound is semi-bricked currently and I am also looking to get back to stock form. I think the most current ROM that I had on it would be like Infection2.3. But I cannot seem to get past the boot animation and I believe the RUU needs to be actually booted up all the way? I will check the Hboot versions and such when I get home. (I tried a ph98img in the root but when it attempted to flash I got "HBoot version is older than expected, exiting")
Any thoughts?
izzaeroth said:
Try this link here http://shipped-roms.com/index.php?category=android&model=Vigor and download the PH98IMG_ICS_3.14.605.12.zip! Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Remember to flash a ph98img zip RUU, the bootloader must be relocked and internal storage will also be completely wiped. Backup the contents in recovery using usb mass storage mounts.
Subiesaurus Rex said:
My rezound is semi-bricked currently and I am also looking to get back to stock form. I think the most current ROM that I had on it would be like Infection2.3. But I cannot seem to get past the boot animation and I believe the RUU needs to be actually booted up all the way? I will check the Hboot versions and such when I get home. (I tried a ph98img in the root but when it attempted to flash I got "HBoot version is older than expected, exiting")
Any thoughts?
Click to expand...
Click to collapse
Sounds like all that needs done is a factory reset(wipe caches+data) and wipe system. Re-flash a Sense rom and fastboot flash the matching boot.img. Try my rom Viral OTA, just the data/system wipes prior to flashing and it willk get you back up to 100%. Rememer to reboot to bootloader if using TWRP.