when using CWM-install please help me
ClockWorkMod Recovery 5.0.2.6
Xperia Arc/Neo
Credits to :
[email protected]
installation script by [email protected]
Please connect your devices and enable usb debugging
waiting for device . . .
push: recovery/sh -> /data/local/tmp/sh
push: recovery/recovery.tar -> /data/local/tmp/recovery.tar
push: recovery/cwm-rec -> /data/local/tmp/cwm-rec
push: recovery/chargemon2 -> /data/local/tmp/chargemon2
push: recovery/chargemon1 -> /data/local/tmp/chargemon1
5 files pushed. 0 files skipped.
3899 KB/s (2682952 bytes in 0.671s)
49 KB/s (788 bytes in 0.015s)
ready to work . . .
Wake up the screen!
Press any key to continue . . .
Press Allow on Super User Request
/system/bin/sh: su: not found
cleaning up . . .
Press any key to continue . . .
Root it first, if you have already reboot before running again.
Sent from my MT11i using Tapatalk
mpiekp said:
Root it first, if you have already reboot before running again.
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
how can i root my neo v running android 4.0.3? thanks for the reply
same problem
i've upgraded to ICS 4 beta.. and now unable to root it..
Do i need to downgrade as my build is 4.1.C.07 now..
if i do... please let me know where to find the firmware for ICS 4.
Flash a kernel.that comes with recovery, you wont lose anything then
Sent from my MT11i using Tapatalk
milairagny said:
how can i root my neo v running android 4.0.3? thanks for the reply
Click to expand...
Click to collapse
roxit666 said:
i've upgraded to ICS 4 beta.. and now unable to root it..
Click to expand...
Click to collapse
By reading
http://forum.xda-developers.com/showthread.php?t=1514399
Also read this (official)thread: http://forum.xda-developers.com/showthread.php?p=22876871
People, read before you start with modifications. Chances to run into problem will be smaller
thank you guys for the help
thank you.. ICS working fine now!
Related
Sxp = jb.400 enigma v4.4
Whenever i try to restore a system app (app+data),it stuck or my device gets restarted.User apps have no problem.
What is the remedy?plz anybody tell.
Anybody?
???
???
????
1.Did you try unchecking Exclude System Apps?
2.Try installing Superuser(and not SuperSU)
Many users reported this prob with Enigma ROM(including me), but no concrete solution is available till date.....
Hmmm
avrojyoti said:
Sxp = jb.400 enigma v4.4
Whenever i try to restore a system app (app+data),it stuck or my device gets restarted.User apps have no problem.
What is the remedy?plz anybody tell.
Click to expand...
Click to collapse
avrojyoti said:
Anybody?
???
Click to expand...
Click to collapse
avrojyoti said:
???
Click to expand...
Click to collapse
avrojyoti said:
????
Click to expand...
Click to collapse
Okay, There are few things I assume which are understood
You are rooted and you have allowed SUPER USER to make changes by Titanium Pro!
If this hasn't, then you must give the root rights to Titanium.
Secondly, I suggest restarting your phone and reinstalling Titanium again.
Further, are you flashing the files of SAME rom or different ??
Update your Super User from google play to latest versions!
Plus have you checked the USB tethering required by Titanium in System > Development ?
I hope this helps!
If not, try the pro version
PRESS THANKS IF I HELPED!
Hnk1 said:
Okay, There are few things I assume which are understood
You are rooted and you have allowed SUPER USER to make changes by Titanium Pro!
If this hasn't, then you must give the root rights to Titanium.
Secondly, I suggest restarting your phone and reinstalling Titanium again.
Further, are you flashing the files of SAME rom or different ??
Update your Super User from google play to latest versions!
Plus have you checked the USB tethering required by Titanium in System > Development ?
I hope this helps!
If not, try the pro version
PRESS THANKS IF I HELPED!
Click to expand...
Click to collapse
I have done all these steps and still my titanium Backup freezes. according to nicolassp it has something to do with SuperSU...
Even I'm note sure but this weird behavior confuses me....
Sent from my Xperia P using xda-developers app
I tried everything...and all is correct...
except
i have supersu in my rom,not superuser
avrojyoti said:
I tried everything...and all is correct...
except
i have supersu in my rom,not superuser
Click to expand...
Click to collapse
1.install superuser with updated binary
2.uninstall SuperSU using root app delete
3. reboot
4 . check if it works...
Sent from my Xperia P using xda-developers app
how to install superuser bro ??? and how to update binary ??
once i tried to do like this...but i lost the root access because of that binary update rules !
avrojyoti said:
how to install superuser bro ??? and how to update binary ??
once i tried to do like this...but i lost the root access because of that binary update rules !
Click to expand...
Click to collapse
Flash Superuser-3.1.3-arm-signed.zip from here
http://androidsu.com/superuser/
Thanks a lot man! It worked!u r grt
hi guys any steps on how to root the zte T82 LTE model
ive tried unlockroot but it didnt root the unit, also tried unrootme but nothing happened
unit is
android 4.04
baseband t82_01
kernel:3.0.8-perf-svn18404
[email protected]
would love to root my ZTE T82 too. It's price-vs-performance is really impressive.
markq4 said:
hi guys any steps on how to root the zte T82 LTE model
ive tried unlockroot but it didnt root the unit, also tried unrootme but nothing happened
unit is
android 4.04
baseband t82_01
kernel:3.0.8-perf-svn18404
[email protected]
Click to expand...
Click to collapse
try this mate http://forum.xda-developers.com/showthread.php?t=1886460
Trozzul said:
try this mate http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
thanks mate, but i ran into a problem
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
5898 KB/s (380532 bytes in 0.063s)
4081 KB/s (1500495 bytes in 0.359s)
5896 KB/s (1165484 bytes in 0.193s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\fatal1ty\Desktop\Root_with_Restore_by_Bin4ry_v31\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
i cant post on his thread due to my new account
greatbal said:
would love to root my ZTE T82 too. It's price-vs-performance is really impressive.
Click to expand...
Click to collapse
yes indeed, im just using this as my pocket wifi connected with the lte network
try put it in a simple directory.
D:\ABC
for example.
Well so after a long time, my phone's touch does not work
Well the sides were useless so I gave my phone for repair and then they repaired it ( I locked the bootloader, installed ics and then gave them)
well the touch was fixed!
then I installed JB ( unofficial) but here the touch does not work at all. Does this mean that this is a driver problem or something like that?
How can I fix this.
Some one please help me!
anyone? @Pandemic if you know?
This happened to 2011 xperia if anyone installed wrong rom... Like xperia mini's rom on xperia mini pro... From that experience,i know that the touch drivers got altered,hence touch problem occured.. There were lengthy process to recover it.. Don't know if it will work or not on our 2012
Sent from my LT22i using xda app-developers app
alone_in_dark said:
This happened to 2011 xperia if anyone installed wrong rom... Like xperia mini's rom on xperia mini pro... From that experience,i know that the touch drivers got altered,hence touch problem occured.. There were lengthy process to recover it.. Don't know if it will work or not on our 2012
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
great
can you please refer me to the link or shed some light
U need to manually replace hw_config.sh ..munjeni told this a long time before when jb was being ported from xperia p to xu ... In the jb kernel thread by devswift1... However what u can try is take necessary files from stock rom
Make a flashable zip out of it and flash in cwm... This is just a hypothesis jatin... Never tried this..
doctor_droid said:
U need to manually replace hw_config.sh ..munjeni told this a long time before when jb was being ported from xperia p to xu ... In the jb kernel thread by devswift1... However what u can try is take necessary files from stock rom
Make a flashable zip out of it and flash in cwm... This is just a hypothesis jatin... Never tried this..
Click to expand...
Click to collapse
which stock rom?
ics? @munjeni, can you please shed some light on this. sorry to bother you for this but...
jatinrungta said:
which stock rom?
ics? @munjeni, can you please shed some light on this. sorry to bother you for this but...
Click to expand...
Click to collapse
I think I misnamed the file ... munjeni knows what to do.. he is THE MASTER
@munjeni please help me just one time
Thank You
jatinrungta said:
@munjeni please help me just one time
Thank You
Click to expand...
Click to collapse
May be he has flagging notification set to off
doctor_droid said:
May be he has flagging notification set to off
Click to expand...
Click to collapse
then I will pm him
Jatin can you please post the solution here after munjeni's response....I am currently facing the same issue and don't know whether its hardware related or not.
Thanks in advance man..
AKA#1 said:
Jatin can you please post the solution here after munjeni's response....I am currently facing the same issue and don't know whether its hardware related or not.
Thanks in advance man..
Click to expand...
Click to collapse
he has yet to reply me and well I do not know if he will
jatinrungta said:
he has yet to reply me and well I do not know if he will
Click to expand...
Click to collapse
Let post hw_config.sh from Xperia U ICS firmware, file is located inside /system/etc folder ! Will try to help you!
Code:
# HW configuration file for kumquat
# Touch FW loader
cyttsp_fwloader -dev /sys/bus/spi/devices/spi9.0 -fw /etc/firmware/ttsp_fw.hex
# Audio jack configuration
dev=/sys/devices/platform/simple_remote.0
echo 0,301,1901 > $dev/accessory_min_vals
echo 300,1900 > $dev/accessory_max_vals
echo 0,51,251,511,851 > $dev/button_min_vals
echo 50,250,510,850,5000 > $dev/button_max_vals
# Proximity sensor configuration
dev=/sys/bus/i2c/devices/2-0054/
val_cycle=2
val_nburst=0
val_freq=2
val_threshold=5
val_filter=0
echo $val_cycle > $dev/cycle # Duration Cycle. Valid range is 0 - 3.
echo $val_nburst > $dev/nburst # Numb er of pulses in burst. Valid range is 0 - 15.
echo $val_freq > $dev/freq # Burst frequency. Valid range is 0 - 3.
if `ls /data/etc/threshold > /dev/null`; then
cat /data/etc/threshold > $dev/threshold # Use value from calibration
rm /data/etc/threshold # Remove temp file
else # No value from calibration, use default value
echo $val_threshold > $dev/threshold # sensor threshold. Valid range is 0 - 15 (0.12V - 0.87V)
fi
if `ls /data/etc/filter > /dev/null`; then
cat /data/etc/filter > $dev/filter # Use value from calibration
rm /data/etc/filter # Remove temp file
else # No value from calibration, use default value
echo $val_filter > $dev/filter # RFilter. Valid range is 0 - 3.
fi
@munjeni
Ok, Xperia U definitely have touchscreen firmware flasher. First of all check if hw_config.sh is identical in your not working JB and your working ICS !!! If sh file is not indentic than simple replace them and allso make sure upload 2 files (from our post)!!!
If sh file is identic and problem with your touchscreen stil exists than you can try next thing (on your own risk only! You maybe get brick! So again you doing on your own risk!!!)
Line inside hw_config.sh look like:
cyttsp_fwloader -dev /sys/bus/spi/devices/spi9.0 -fw /etc/firmware/ttsp_fw.hex
Click to expand...
Click to collapse
These command is for firmware update! If you flashed for example Xperia Go rom to Xperia U you have definitelly flashed wrong firmware and thats reason for bad things related to your problem with phone touch screen (some guys hard bricked his phones by flashing wrong device android fiemware)!
So...
1. extract cyttsp_fwloader from your ICS zip (located in xbin or bin folder, not sure by now)
2. extract touchscreen firmware from your zip which is located in /system/etc/firmware/ttsp_fw.hex
3. put these 2 files to /data/local/tmp ,give chmod 755 to booth files
4. flash them by command:
adb shell /data/local/tmp/cyttsp_fwloader -dev /sys/bus/spi/devices/spi9.0 -fw /data/local/tmp/ttsp_fw.hex
Click to expand...
Click to collapse
If you brick your phone I can not help you! Simple I have no experience with these thing (never tried!)! Good luck!
jatinrungta said:
Well so after a long time, my phone's touch does not work
Well the sides were useless so I gave my phone for repair and then they repaired it ( I locked the bootloader, installed ics and then gave them)
well the touch was fixed!
then I installed JB ( unofficial) but here the touch does not work at all. Does this mean that this is a driver problem or something like that?
How can I fix this.
Some one please help me!
Click to expand...
Click to collapse
bro your touch is not working on jb or ics or gb or in all??
bibhu059 said:
bro your touch is not working on jb or ics or gb or in all??
Click to expand...
Click to collapse
in jb!
jatinrungta said:
in jb!
Click to expand...
Click to collapse
bro in phantom 1.0.7 format cache,system,data everything and then in cwm usb mode put the rom to sd card..then 3wipes then install the zip..i
also i faced the same problem..but by doing this problem solved.so try this..good luck
bibhu059 said:
bro in phantom 1.0.7 format cache,system,data everything and then in cwm usb mode put the rom to sd card..then 3wipes then install the zip..i
also i faced the same problem..but by doing this problem solved.so try this..good luck
Click to expand...
Click to collapse
can you post . cyttsp_fwloader if you have a ics frimware
@kontini @Little Zed @NoobCoder @bibhu059
hello guys, i rooted my canvas hd today. i am new to it and rooted my cell as per one of the thread in this forum and with the help of YouTube video. everything went fine for me while rooting process.
i used this http://forum.xda-developers.com/showthread.php?t=2167621 to root my device & http://youtu.be/x-rIJqwSmdE video.
now the problem i am facing is sapersu is showing access denied despite i wiped off the data, restarted my cell..granted prompt permission and all..the issue is not fixed
i have also did the same process twice and the root was successful but still access is denied :crying:
i am using the customized ROM 4.2.1 which also i installed using http://forum.xda-developers.com/showthread.php?t=2306461
please help me solve my issue as i have run out of internal sd space :crying:
i hope to get quick reply from the forum members
sauravthedreamer said:
hello guys, i rooted my canvas hd today. i am new to it and rooted my cell as per one of the thread in this forum and with the help of YouTube video. everything went fine for me while rooting process.
i used this http://forum.xda-developers.com/showthread.php?t=2167621 to root my device & http://youtu.be/x-rIJqwSmdE video.
now the problem i am facing is sapersu is showing access denied despite i wiped off the data, restarted my cell..granted prompt permission and all..the issue is not fixed
i have also did the same process twice and the root was successful but still access is denied :crying:
i am using the customized ROM 4.2.1 which also i installed using http://forum.xda-developers.com/showthread.php?t=2306461
please help me solve my issue as i have run out of internal sd space :crying:
i hope to get quick reply from the forum members
Click to expand...
Click to collapse
did you deny root acess when super su prompt for it??
and as you installed a custom ROM ur fon should have root acess
jayadu said:
did you deny root acess when super su prompt for it??
and as you installed a custom ROM ur fon should have root acess
Click to expand...
Click to collapse
no i didnt deny any access request..no where any app asked for request and i installed the official rom of micromax some 4 months before using the help of youtube video tith the use of sp tool :crying:
sauravthedreamer said:
no i didnt deny any access request..no where any app asked for request and i installed the official rom of micromax some 4 months before using the help of youtube video tith the use of sp tool :crying:
Click to expand...
Click to collapse
well if you installed the same 4.2.1 official rom thn y to install the same ported rom again??
i ll say you root ur fon using FRAMAROOT again and give it a try once again by updating super su
jayadu said:
well if you installed the same 4.2.1 official rom thn y to install the same ported rom again??
i ll say you root ur fon using FRAMAROOT again and give it a try once again by updating super su
Click to expand...
Click to collapse
Okk i tryed using FRAMAROOT...but its asking me "the su binary needs to be updated.continue?"
when i press continue i get two options normal and TWRP/CWM....whn i choosed normal its saying installation failed...so can you help me out how to use 2nd option..as its aking for reboot..and new window open there asking me press up or down volume key..i dont know that step..so pls help me out:crying:
Well go through the 2nd step
Nd b4 going though tht step 1st do u hav a custom recovery installed???
If not pls do it
Nd press the volume up key as it'll take u to the recovery nd everything should be done by the system itslf so no need to worry of other things after tht process completed it'll either ask u to reboot r it'll reboot by itself just do the necessary
Sent from my Micromax A116 using XDA Premium 4 mobile app
sauravthedreamer said:
Okk i tryed using FRAMAROOT...but its asking me "the su binary needs to be updated.continue?"
when i press continue i get two options normal and TWRP/CWM....whn i choosed normal its saying installation failed...so can you help me out how to use 2nd option..as its aking for reboot..and new window open there asking me press up or down volume key..i dont know that step..so pls help me out:crying:
Click to expand...
Click to collapse
search google for mt6589 rooter and enjoy
Sent from my Nexus 5 using XDA Premium 4 mobile app
rajneeshk said:
search google for mt6589 rooter and enjoy
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i used FRAMAROOT...and it worked awesomly for me...jst instald it...and rebooted...and my cell was rooted :good:
MOVED
PLEASE USE THIS LINK
http://forum.xda-developers.com/grand-prime/general/root-galaxy-grand-prime-android-5-0-2-t3194688
CWM
When have CWM recovery or TWRP for 5.0.2 grand prime?
Fahd95 said:
INSTALL LOLLIOP ON SM-G530H/DV
1- Download Kies + Odin
2-Download the lollipop rom from h t t p : / / f o r u m . y o u m o b i l e . o r g /downloads/?sa=view&down=4710
3-extract the zip and flash the rom via Odin
4-Open recovery > wipe data/factory reset > reboot system now
Note Rom didn't work on SM-G530H/DS
-------------------------------------------------------
Root SM-G530H Android 5.0.2
1-Download the zip file from h t t p : / / d - h . s t /AWH
2-extract the zip files and flash file (2_cache_recovery_stock_mohan...) via Odin
3-now your phone is rooted but you need to reflash the stock recovery.
4-to flash the stock recovery download (Stock recovery ) and flash it via Odin
5-open recovery >wipe cache partition>reboot system now.
Stock recovery link : w w w . 4 s h a r e d . c o m /file/G8SrDkYqba/stock_recovery.html?
Note: to best performance you can replace the superuser app
via installing kingroot app and click start
after that open kinguser > click on (uninstall tool) > click on superuser > click uninstall.
--------------------------------------------------------------------------------------------------------------------------
To get the best appearance with the possibility of put applications in folders and get the latest news around the world.
Install HtcBlinkFeed
To install HtcBlinkFeed
1-Your phone should be rooted
2-Download the zip file from w w w . 4 s h a r e d . c o m /zip/A5YkDc-qce/htc_tools.html
3-extract the zip files and install the apks on your Phone (lucky patcher+HtcBlinkFeed +HtcServicePack)
4-Open lucky patcher click on HtcBlinkFeed > tools > Move to /system/app
and do the same thing on HtcServicePack
5-reboot your phone
------------------------------------------------------------
screenshot: w w w . 4 s h a r e d . c o m /photo/FHK0XA4vce/screenshot.html
Click to expand...
Click to collapse
Is this applicable on all baseband? mine is XCU. TIA
samsung duos sm-G7102 lolipop update plz
Sent from my SM-G7102 using Tapatalk
have you install xposed ?
i tried some but it dosn't work >>> can u help pls
thank
zshou92 said:
have you install xposed ?
i tried some but it dosn't work >>> can u help pls
thank
Click to expand...
Click to collapse
I don't know where is your problem ?! please tell me and don't try to flash this rom on any grand prime just on SM-G530H/DV
The rom works great >>> but i want to install xposed for 5.0.2 , I test the lastest rev but it don't works .
Hi, i recently get my Grand Prime, can you tell me if this rom works for my SM-G530H? im asking it because i dont know if my baseband is compatible, G530HXXU2A thanks in advance
jornrk said:
Hi, i recently get my Grand Prime, can you tell me if this rom works for my SM-G530H? im asking it because i dont know if my baseband is compatible, G530HXXU2A thanks in advance
Click to expand...
Click to collapse
I do not know, but try it and do not worry if they do not match Odin will not flash the rom and will give you an error in the aboot file
Fahd95 said:
I do not know, but try it and do not worry if they do not match Odin will not flash the rom and will give you an error in the aboot file
Click to expand...
Click to collapse
Fadh95 , if i use your root method, will xposed work on my rooted LP SGP?
npredtorch said:
Fadh95 , if i use your root method, will xposed work on my rooted LP SGP?
Click to expand...
Click to collapse
Xposed on Samsung touchwiz only works on deodexed roms
Enviado desde Tapatalk
syverman said:
Xposed on Samsung touchwiz only works on deodexed roms
Enviado desde Tapatalk
Click to expand...
Click to collapse
ooh i see. okay sir thanks! but it is rooted right? can install greenify or apps like that?
and can delete bloatwares?
If you're rooted you can install apps like that, greenify will work limited, but work.
Enviado desde Tapatalk
syverman said:
If you're rooted you can install apps like that, greenify will work limited, but work.
Enviado desde Tapatalk
Click to expand...
Click to collapse
okay sir. Got it! Thanks! Hoping for custom rom
Fahd95 said:
Root SM-G530H Android 5.0.2
1-Download the zip file from h t t p : / / d - h . s t /AWH
2-extract the zip files and flash file (2_cache_recovery_stock_mohan...) via Odin
3-now your phone is rooted but you need to reflash the stock recovery.
4-to flash the stock recovery download (Stock recovery ) and flash it via Odin
5-open recovery >wipe cache partition>reboot system now.
Stock recovery link : w w w . 4 s h a r e d . c o m /file/G8SrDkYqba/stock_recovery.html?
Note: to best performance you can replace the superuser app
via installing kingroot app and click start
after that open kinguser > click on (uninstall tool) > click on superuser > click uninstall.
Click to expand...
Click to collapse
Any proof of your rooting method ?
Any screenshots or anything at all ?
How to know which basebands are compatible? mine is G530HXXU1ANK1
genesisbaliw said:
Is this applicable on all baseband? mine is XCU. TIA
Click to expand...
Click to collapse
Did this and was stocked at boot. what happened? Help me pleassseee (
Hi today i update my grand prime g530h 4.4.4 to 5.0.2 and its successfully done n works great but the problem is i cnt able to run my cwm mode which was works nicely earlier .... i want help help me !
i want to root it manually by manually i mean i should know hat i am doing
i want to know the basics and the commands for adb