Found a good one here, hopefully will generate enough interest to make it happen.
androidtablets.net/forum/asus-tablets/34182-protective-silicone-case-asus-transformer-prime.html
Sign me up!
I'm so surprised no one is making these. It was a must have for my TF101. Now that I have the TF201, It feels naked and vulnerable.
I hope this gets made by someone soon. Like I said, it feels naked without the rubber skin protection.
mscala said:
I'm so surprised no one is making these. It was a must have for my TF101. Now that I have the TF201, It feels naked and vulnerable.
I hope this gets made by someone soon. Like I said, it feels naked without the rubber skin protection.
Click to expand...
Click to collapse
Expect it for the new Transformer Pads, not going to see many more accessories for the old discontinued Prime.
chamberc said:
Expect it for the new Transformer Pads, not going to see many more accessories for the old discontinued Prime.
Click to expand...
Click to collapse
Stop spreading misinformation, the Prime is not discontinued.
The new Transformer tablets consist of a budget model designed to replace the original Transformer (and with reduced specs & features to match) and a more expensive "premium" tablet with a higher res display and a price to match. The Prime will continue to be the "mainstream" model for at least the next year.
The main reason there are so few accessories for the Prime, is that people don't know if it will sell well so they don't bother pre-making accessories like they do for the iPad. If you follow the release of the Xoom of the Galaxy Tab 10.1 you will see that in the first few months 3rd party accessories for those specific tablets were also very sparse.
almightywhacko said:
Stop spreading misinformation, the Prime is not discontinued.
The new Transformer tablets consist of a budget model designed to replace the original Transformer (and with reduced specs & features to match) and a more expensive "premium" tablet with a higher res display and a price to match. The Prime will continue to be the "mainstream" model for at least the next year.
The main reason there are so few accessories for the Prime, is that people don't know if it will sell well so they don't bother pre-making accessories like they do for the iPad. If you follow the release of the Xoom of the Galaxy Tab 10.1 you will see that in the first few months 3rd party accessories for those specific tablets were also very sparse.
Click to expand...
Click to collapse
Take for instance, the Transleeve...
This product was discontinued as of Friday, February 24, 2012. Call for availability.
chamberc said:
Take for instance, the Transleeve...
This product was discontinued as of Friday, February 24, 2012. Call for availability.
Click to expand...
Click to collapse
The Transleeve was garbage. It has an 80% failure rate, as in: it fell apart in people's hands during normal usage. Also it has the unfortunately tendency to physically damage every Tablet it was used with.
Hopefully Asus will release an updated version that fixes these problems.
However that doesn't mean that the Transformer Prime tablet has been discontinued. There is no evidence and until you provide me a link to Asus explicitly stating that the tablet is disco'ed stop spreading misinformation.
Incidentally, the TP300 and TP700 both use identical mounting ports to the TF Prime, so any future versions of screen protectors like the Transleeve should be backwards compatible with the Prime since all tablets have the same size screen. Perhaps they discontinued the Transleeve because they have a better accessory set to be released with these new additions to the Transformer Pad line.
This is what I want.
A little thinner mind you, but a silicone case is my desire.
Sighz, I used to have a very nice case for my samsung galaxy s2. Silicone inside, hard case outside. It was totally AWESOME! See this ->
ebay.com.sg/itm/Black-Orange-Silicone-Combo-Case-Cover-Samsung-Galaxy-S2-I9100-/190612983403?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item2c616b4e6b
It looks cool and doesn't scratch your phone at all!
Some are hard cover inside, and silicone outside - i had them for my iphone but it scratched my iphone! See this -> ebay.com.sg/itm/Hard-Case-w-Soft-Skin-Rubber-Silicone-Cover-iPhone-3G-3GS-Black-Orange-/140680538736?pt=PDA_Accessories&hash=item20c136aa70
Thus I'm hesitant about getting a gumdrop case for my prime, because the hardcase is on the inside while the silicone is outside.
CAN SOMEONE MAKE THE FIRST ONE FOR THE TRANSFORMER PRIME??!! DON'T MIND PAYING MORE FOR IT! HAHAHA
I too want a TPU case for my Prime and am disappointed one has not been released yet. I have seen the androidtablet thread gauging interest in a silicone case, and I might buy one of these for use in rugged conditions, but it appears they would be thick and I want a thin one for daily use and much prefer tpu to thick rubbery silicone.
I currently have the next best thing to a tpu case and that is the roocase dual view leather case. It is two pieces - one is a sleeve that protects the back, sides, and bezel like a silicone or tpu case would. The other part is a folding case that attaches to the sleeve with velcro and will allow it to stand in portrait or landscape and at various angles. I don't use that part much, though, since I prefer cheap, sturdy universal tablet stands (about $6 on ebay) and have them at work and home, so don't need to carry the external part of the roocase.
With the roocase sleeve and a screen protector, the thing is well protected and I can throw it in my (large) lunchbox or a pocket (in a scottevest vest or jacket - yes I am a _real_ nerd and own these) and not worry about dropping or scratching it. The leather of the roocase sleeve is thicker than a tpu or thin silicone case would be, although it looks like it is smaller than a thick silicone case such as the guy on androidtablets is proposing.
It is a pita that the leather of the roocase sleeve protrudes more than it needs to and makes the power button hard to reach. Plus it makes the Prime almost an inch larger in both height and width and almost doubles the thickness. So, yes, I really want a tpu case like everyone else but the roocase sleeve is the only substitute there is for now.
Gumdrop case
You guys should google gumdrop case tf201, they are starting production and will start shipping April 16.
The Gumdrop is cool but way to much case for me
Related
Just received the rooCASE Slim Fit from PC Micro via Amazon.com. Sorry, I can't yet post links, so the product title is: rooCASE Slim-Fit (Black) Folio Case Cover with Multi Adjustable Viewing Angles for Asus Eee Pad Transformer 10.1-Inch TF101 Android Tablet Wi-Fi.
I had been looking for a while for a case with clips that would leave the bottom edge open so that one could dock the tablet without taking it off, so I was excited to try it out. My initial feelings are very positive.
It's PU leather, so while not top grain, it's still pretty supple and smooth. The leather is also slightly padded, so the case is comfortable to hold. The reinforced edges are crisp and straight, so there's not a lot of give or bend. The interior is a soft, padded microfiber. The foam is pretty firm, so it seems like it might retain its shape fairly well.
Structurally, the tablet is held in by two clips on each side, one each holding the top corners (when in landscape) and the main clip about 2/5 of the way down each side. On the bottom corners, there are clips, but they're more like corner protectors as they're there to guide the tablet when the case is closed.
Setting the tablet in the first two grooves felt good. The furthest groove which puts the screen in the flattest position though doesn't hold very well. This is because the rounded back of the tablet near the edge doesn't let it sit all the way into the groove. This doesn't bother me though since I don't see myself wanting to use it that flat. It actually sits nicely on my lap in the middle groove, so it's nice to be able to prop up the tablet without having to rely upon the dock.
Speaking of which, swinging the bottom edge of the tablet away from the case allows it to easily connect to the dock. Before receiving the case, I wondered whether the clip that holds it closed would get in the way. In actuality, it props up the keyboard rather well -- the keyboard rests flat between being propped up on the clip and because of the way the dock hinge props up the rear of the keyboard. Alternatively, the case cover folds back out of the way easily as well, and kind of works to support the screen a little bit. This configuration is probably better suited for a desk vs. one's lap, but I'll have to experiment a little bit.
I'm interested to see how I like using it over time, but for right now, this case has potential. I was worried about the clips: whether they'd be too weak (they're not) and whether they'd prevent the case from folding flat (they don't). I like that they hold the tablet securely in place, without the need to have the bezel surrounded/covered by leather.
The overall look resembles a small notebook/portfolio and the branding is understated -- just an embossed rooCASE logo in the lower right.
It seems like the case will protect the tablet from accidental bumps and bruises, give it a sleek appearance and quench my thirst for a higher end case until Noreve or Piel Frama attempt to separate me from my money. We'll have to see how durable it winds up being -- right now, the surface seems to repel light scratches pretty well.
Overall, for $30 I'm pretty pleased. And it comes with a small capacitive stylus, that connects to the tablet via a small plastic plug that fits into the 3.5mm jack. Shipping was via USPS and took just two days from CA to the east coast.
Lots of pics to follow.
More pics.
Last two.
(I promise, Mods)
And to complete it all, here's the link: http://amzn.com/B0058DLAA8
Can't wait for mine to arrive!
Mine came in yesterday as well. I am extremely happy with it, I did not anticipate being able to dock it with the case on, so all the best. The bundled stylus from roocase is just the cherry on top!
damn thats nice
It's great news that there's finally a decent case that you don't have to remove in order to be able to dock with the keyboard. Hopefully more manufacturers start making cases in this design.
EDIT: Hmm I have a theory... if you buy one of those cases with velcro at the bottom, could you theoretically dock it without taking off the case by just unattaching the velcro? Can anyone confirm or deny?
Can you fold it up in the dock with the case on?
maxpower47 said:
Can you fold it up in the dock with the case on?
Click to expand...
Click to collapse
no
--------
This is the first case I have seen that uses clips to hold the Transformer, instead of a leather or fabric frame of some sort. I was beginning to think there weren't any out there. Thanks for the review.
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
SoundSurfer said:
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
Click to expand...
Click to collapse
Their are the same one from same factory. Just selling via different sellers.
xjarl said:
Their are the same one from same factory. Just selling via different sellers.
Click to expand...
Click to collapse
The Acase one is eligible for Amazon Prime. It can be in my grubby paws tomorrow.
Just received one.
I originally bought the regular multi-angle roocase version. As soon as this slim-fat was announced, I unloaded that one and pre-order this one.
They delayed the shipment for 1 week but refunded my $5 shipping charge (nice). I like this slim-fat version a lot. It's the best case I've seen (I need some protection, but I really hate to cover-up the beauty of the Tab).
Received mine today. I echo everything that the OP noted. Very nice and exactly what I was looking for.
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Thank you for the informative review. You may have just convinced me to buy a second case.
I already have this on order it shipped out yesterday so I'm hoping it arrives soon, and after your review and all the great pics. I hope it comes even faster now. Thanks for your time in making this, good info.
thaibruin said:
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Click to expand...
Click to collapse
I unfortunately do not have that kind of patience. Case ordered and overnighted. My TF will finally have a case that doesn't hide it.
Mine arrived today too. OP is spot on - this is a great case; clean lines, excellent fit and looks sharp.
There is no slot at the bottom to connect to the charger, so to charge it, I have to lay it face up w/ the cover open.
What is the thinnest folding case available
I am looking for a case for the 300 that is as thin as possible. I really only care about scratch protection, I don't expect it to protect from drops (not that most case will provide that protection anyways). I do need it to have a stand function to watch movies. Since this is already thicker than prime I want to minimize that as much as possible.
Even the cheapie vinyl thin case that came bundled with the Acer a500 at costco would be fine. It was very thin.
The case I have for my ipad2 is tapered at the edges to keep the profile as thin as possible instead of being just squared off at the side edges. In other words, it should wrap around the side edges like a glove.
i just ordered the MOKO slim fit case from amazon. I hope this caters to your needs. it's slim and tough enough to even withstand drops.
Sent from my ASUS Transformer Pad TF300T using XDA
mickey878 said:
i just ordered the MOKO slim fit case from amazon. I hope this caters to your needs. it's slim and tough enough to even withstand drops.
Sent from my ASUS Transformer Pad TF300T using XDA
Click to expand...
Click to collapse
decent but not quite what I am looking for. The case you are talking about clips or hooks onto the tablet in about4 to 6 areas (4 corners plus maybe 2 additional top and bottom). It leaves alot of the edge exposed. On th eplus side it is usually a hard back case so decent protetion.
However, what I had in mind is a case that slips all around the edges of the tablet. Most cases are designed like this but except what I have in mind would be slimmer with the edges tapered to match the edge of the tablet but still wrapping the entire tablet (except at the ports). Hard to tell, but I think this case fits that description but it is for tf101 only:
http://www.amazon.com/rooCASE-Leath...9?s=electronics&ie=UTF8&qid=1337799671&sr=1-9
Honestly? I am still waiting for something the like the shell+smartcover that my mom's Ipad has. That really is brilliant stuf.
For now I found this to be the thinnest sleeve/cover/whatever
Urbanflip series on HandiHeldItems
I have one and had to adjust the hole for the headphone jack.
But it works pretty good, is a lot thinner that some other case I bought and has a cut out for the charger.
But an Ipad-like smartcover .. to me that's the bomb
WOEHAA said:
For now I found this to be the thinnest sleeve/cover/whatever
Urbanflip series on HandiHeldItems
Click to expand...
Click to collapse
Wow, that's almost exactly what I'm looking for - just with the ability to use it with the dock! They have this one on their site that does just that:
HHI Keyboard Case with Slim Portfolio Stand Cover for Asus Transformer Pad TF300
I have a carbon fiber leather case for my Galaxy Tab 10.1 and won't buy another case unless it's the same material, it looks so slick and resists scratches and hides dirt like no other case. Since getting it, I've taken out the tablet probably 3 times!
Good find!
KryptosXLayer2 said:
Wow, that's almost exactly what I'm looking for - just with the ability to use it with the dock! They have this one on their site that does just that:
HHI Keyboard Case with Slim Portfolio Stand Cover for Asus Transformer Pad TF300
I have a carbon fiber leather case for my Galaxy Tab 10.1 and won't buy another case unless it's the same material, it looks so slick and resists scratches and hides dirt like no other case. Since getting it, I've taken out the tablet probably 3 times!
Good find!
Click to expand...
Click to collapse
These are nice! To bad the carbon fiber one won't be out until June 18!
From my long awaited and totally worth it EVO LTE!
All 3 of these are pretty much the same and is the thinnest case out in the market:
http://www.amazon.com/MiniSuit-Tran...U7SW/ref=sr_1_4?ie=UTF8&qid=1338346700&sr=8-4
http://www.amazon.com/Poetic-HardBa...ZERO/ref=sr_1_1?ie=UTF8&qid=1338346673&sr=8-1
http://www.amazon.com/MoKo-Slim-Fit...57RI/ref=sr_1_8?ie=UTF8&qid=1338346673&sr=8-8
I found what I was looking for but unfrtunately it is only for TF101
http://www.amazon.com/rooCASE-Leath...8517&sr=8-1&keywords=roocase+tf101+tf300+slim
I also found a similar case on Ebay but it looks slitghtly cheap. I wish it wasn't microsuede:
http://www.ebay.com/itm/ASUS-Transf...?pt=US_Tablet_Accessories&hash=item3cc88b0bbc
This case is also very thin but I can't find it anywhere outside of the wholesale site:
http://www.alibaba.com/product-gs/595097536/SiKai_Ultra_slim_Leather_Case_for.html
browsed the net cant find anything. Is it to soon??
Iam looking for a full body skin made of silicon.
Armor suit has two right now
http://www.armorsuit.com/tablets-sc.../asus-tablets/asus-transformer-pad-tf300.html
I am also looking for a good armored back shell if that is what you mean?
I have one on my Galaxy Tab 7, it is a hard shell covered with silicon (like this one, mine was much cheaper if i recall right ). It fits tightly around the edges, can handle some drops, makes the tablet not much bigger in size and the tablet does not slip out of your hands easy and the screen never touches the surface if you lay it on a flat surface with screen down.
The nearest thing i can find at the moment is the one from Gumdrop. But I think it will make the tablet too bulky and the shipping costs to Europe are almost as expensive as the case itself.
The TF300 is fairly new, so it will take some time before factories start producing skins for our beloved tab.
I check eBay and Alibaba on a regularly basis and the only cases that i can find right now are leather ones.
I think in a month or two China will be flooding the world with affordable, good, sturdy, sleek and practical cases.
If i find one sooner then you i'll let this thread know.
Edit:
Ah now i read you want FULL body armor of silicon. Then I ony know of Gumdrop and Otterbox. The latter does not have a case for the TF300 yet.
Case of TF300
When can we take a group to buy the TF300 case ?
wont amor suit+ full body cover plus a folio case be enough for protection?
Has anyone found a good cover or case. There seems to be very little available even on eBay?
Check Amazon there are several. Got mine for $12.
Smeagol1375 said:
Check Amazon there are several. Got mine for $12.
Click to expand...
Click to collapse
What did you get? Do you like it? I haven't been able to find any "non-folio" cases. I don't want a flap, just some good corner protection
This is a fantastic case. It's magnetic so it wakes it and puts it to sleep. It's slim, it fits perfectly, and the front can be folded to stand it up. They have a ton of colors and it looks really nice. It's only $15 shipped!
Fintie ASUS Memo Pad 7 ME572C / ME572CL Slim Shell Case https://www.amazon.com/dp/B00QURWW4E/ref=cm_sw_r_awd_cFUWub03J621A
Im getting the me176cx and need a good case, theres loads, any recommendations would be welcome, do people also bother with screen protectors nowadays??
thanks
I'm not worried about a screen protector but only because of the way I use mine. If I had children playing with it or used it in harsh conditions, I would.
I gave Memo 7 tablets and covers covers to my grandchildren
trouthunter7 said:
Has anyone found a good cover or case. There seems to be very little available even on eBay?
Click to expand...
Click to collapse
This Christmas I gave Memo 7 tablets and BobjGear covers to all my grandchildren. I dont know what you mean by "good", but for me, the kids drop them a lot and I have not had to replace one yet. :fingers-crossed::fingers-crossed:
Did anyone spot a nice genuine leather sleeve or folio for either ME176C or ME572C (I have both ) . I have one PU leather folios for the ME176C but not only was it cheap, it looks even cheaper, has a lousy feel, adds lots of bulk and weight and the built-in stand is pretty much useless.
I'm thinking of getting an iPad mini sleeve as it has exactly the height (but more depths and less width) and there're plenty to choose from...
I got the official ASUS case for my ME572CL. Not the folio smart case, which is way too expensive, but the soft silicon rubber one. Cheaper, looks nice, thin and offers reasonable protection, but I really don't recommend it - they have tried to keep the edges thin so that they don't cover any of the glass screen, so the fit is much too loose. Also it has no magnets and no strap or fastner, so the screen cover just flaps open. Because of these flaws the case is not really fit for purpose and I find myself taking it off whenever I actually use the tablet would have been better off just buying a cheap nexus 7 sleeve.
Well, meanwhile I was doing a little research and figured out that iPad Mini Sleeves (which can be found in abundance) would be a perfect fit due to the exact same length. However thanks to a strike here it's been in somewhere in the mail for just shy of 2 weeks now...
I think the nexus 7 2013 size is a much closer fit.
PurpleRob said:
I think the nexus 7 2013 size is a much closer fit.
Click to expand...
Click to collapse
You're totally right. Thanks for the tip.
Can anyone recommend a good "bumper" case? You know, a rubbery one that just slips on (covers the back and edges only, no front cover) and protects it a bit from falls?
What's a good case for the 176ce?
Sent from my K013 using Tapatalk
Soft Neoprene Sleeve Zip Case Cover 11.6 - 12.5"inch Chromebook Laptop Netbook Review
http://pages.ebay.com/link/?nav=item.view&id=131282464412&alt=web - 6.99GDP
I purchased this pouch from ebay as I needed something to keep my tablet in whilst I decided what permanent solution I was going to have. I chose red and black but there is different options available.
It came in a large envelope and was not folded. Last time I purchased something this size it was folded and left a nasty fold in the middle.
The pouch is of good quality and my tablet fits in comfortably. The zips feel strong and not like these cheap ones that split open and fall apart.
The pouch is strong enough to keep it free from scratches if you're transporting it in bags and briefcases, however it probably won't protect it from drops and knocks, especially dropping from height. It most certainly won't stop the screen shattering if something was to land on it.
The outside is a soft and smooth stretchy material and the inside is made of something similar except has a slight flocking to it to protect the case of the tablet and screen.
PROS: Cheap and quick solution to keeping your pride and joy safe, good quality, decent zips and materials
CONS: Won't protect from strong knocks and bumps.
I need one of those! Does this Note Pro 12.2 fit tight in there or is it loose? Thanks!
dja2k
It's not so tight as it's hard to close and it's not loose enough for it to move about. But what I have done is take the keyboard from my keyboard case combo and fit them both in the sleeve.
I think comfortable is the word.
Ah nice! Good to see more people using a sleeve Much more practical than a flipcover.
I've got a similar one, but it's from Samsonite, and it's for 13.3 laptops. This one's the one I've got: http://www.samsonite.co.uk/colorshi...13.3inch-dark-brown-turquoise/58130-2079.html
Also fits my keyboard and a ton of other stuff, pictures are in the Accessories thread.
Those aren't sold in the US though, so this is a great option for those who want one.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Do you think I can manage it to fit with one of these Fosmon DURA-FRO Ultra Slim Fit Case on it? Thanks!
dja2k
ShadowLea said:
Ah nice! Good to see more people using a sleeve Much more practical than a flipcover.
I've got a similar one, but it's from Samsonite, and it's for 13.3 laptops. This one's the one I've got: http://www.samsonite.co.uk/colorshi...13.3inch-dark-brown-turquoise/58130-2079.html
Also fits my keyboard and a ton of other stuff, pictures are in the Accessories thread.
Those aren't sold in the US though, so this is a great option for those who want one.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Click to expand...
Click to collapse
I am strangely attracted to that. I read in one of your previous reviews or accessories you have a messenger bag from the same people. But at £80 ish it's a pretty large investment. Fair enough ill be protecting my tablet, but will look about for a cheaper version first! But it's definitely on my wish list.
dja2k said:
Do you think I can manage it to fit with one of these Fosmon DURA-FRO Ultra Slim Fit Case on it? Thanks!
dja2k
Click to expand...
Click to collapse
I have something similar to this. It fits well on my tablet. I got mine on ebay for a couple of quid so if it didn't fit then I wouldn't have lost much. If you can take the plunge and write a review. I'm sure others would be interested in your opinion of it.
I have some ebay bucks coming my way on April 1st, so I am gonna hold of til then to order one of these. In the meanwhile I had gotten this one 11.6"/12.1" Black Neoprene Notebook Laptop Sleeve Bag Pouch which will have to do til then. Thanks!
dja2k