Hey Guys, I hope you are having a good day. Mine is not a good one.
I wanted my experia st15i phone to be back on stock again so I can root it. I am running a .62 firmware. I have read on doomlords thread that .62 firmware cannot be rooted, so I decided to flash it back to the stock phone .368.
I followed all the step on the flashing on the phone.
-downloaded the flashtool for experia latest version. Followed the steps
- installed the necessary drivers -adb, flashtool drivers.
- then I followed the steps to flash the phone
This error came up (see Attachment) after that I haven't been able to turn on my phone since then. Even If I tried again, still comes up the same error.
BIG PROBLEM! My phone now cannot be turned on, it keeps getting back to flash mode whenever I connect it to the computer.
Please help!
I am sorry but I only follow steps throughtout the flashing method, I don't know if I had to unlock my bootloader before I flash it, or root it.
Please help, I am currently researching now If I can turn back my phone again.
flash to stock rom.. .42 firmware is good if you want to keep root..i saw the image from that are you flashing any kernel..?beacause you are in fastboot mode..but to flash ftf file you have to be in flashmode
Error with the flashtool, phone stop working
No, I am not flashing any kernels. I was in flash mode. I was never in fastboot mode.
Ok thanks for the heads up, I'll use .42 instead.
But still currently having this problem. I can't do anything because I can't turn on the phone. If I turn it on, the logo doesn't come up and the blinking light is on GREEN, so that means I am still in flashmode (even without the connection to the computer). If I connect the phone when the flashtool is there, its says on the log that it's on flashmode.
The Big Problem is, How can I turn it on back to normal mode. releasing the flash mode. If that really is the problem, when the error came up.
Second Question. Do you have to unlock the bootloader to perform the root or flashtool. I already have installed the adb drivers.
first there is no need of unlock bootloader to flash ftf file..just download ftf file then put in firmware folder..then open flashtool... click on flash and then click on flashmod then just select your ftf file and press ok..switch off your mobile..then press volume down button and coonect your mobile to pc using usb cable..flashtool will flash that firmware...
Thanks...
But, I have already followed all those steps you said. then that error comes up (refer to the thumbnail above). After that I haven't been able to turn on the phone.
When I try to turn on the phone, the logo screen won't show and the light that blinks above the phone is green. Meaning its kinda stuck on flashmode.
I am so scared right now, if I can't fix it.
nebrossuser said:
Thanks...
But, I have already followed all those steps you said. then that error comes up (refer to the thumbnail above). After that I haven't been able to turn on the phone.
When I try to turn on the phone, the logo screen won't show and the light that blinks above the phone is green. Meaning its kinda stuck on flashmode.
I am so scared right now, if I can't fix it.
Click to expand...
Click to collapse
may be this help you..http://forum.xda-developers.com/showthread.php?t=1126358
Try to flash with wotanserver.Search on google wotanserver, make an account, download the wotanserver software, and follow the instructions.
Thanks Guys
Thanks you very much T3sla... wotan server worked great.
nebrossuser said:
Thanks you very much T3sla... wotan server worked great.
Click to expand...
Click to collapse
No problem dude, just happy to help
Related
Hi guys - flashed my x10i a few times and have tried various roms via xrecovery install and all worked fine. I was trying another new rom yesterday and the battery fell out halfway through install. Not sure what has happened, but x10 now stuck on sony ericson boot screen and wont enter xrecovery (i think its not there tbh) and as its stuck on boot screen, I cant select debugging mode. Flash tool wont work as cant enter debugging and when i hook it up to sony service update, it just says newest firmware/software installed.
I have tried, and still trying, one click but that keeps hanging!
Help guys . . . please
Flash a kernel maybe.
Sent from my Desire HD using xda premium
I have flashed the downgrade and dooms kernal that came with the flash tool but it only semi flashes as I cant put the x10 in debug mode as cant enter settings due to constant display of boot screen. Really screwed
Did you do a back up?
Sent from my Desire HD using xda premium
You dont have to flash downgrade only dooms.
Sent from my Desire HD using xda premium
Gone back in to flash tool. selected azuzu kernal and flashed to point where it says to reconnect x10 in debugging mode (which i cant!). Not sure if this was a succesful flash but x10 still stuck at boot screen. Service update still states latest software installed. x10 still bricked. oneclick keeps stating the following:Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing rageagainstthecage...
error: device not found
FAILED
Seriously stressed now as cant afford a new phone
oh' made a nandbackup but that was saved to my old laptops hdd which is long gone
Do you have the 2.3.3 firmware, perhaps you can flash that.
Sent from my Desire HD using xda premium
Delete
Sent from my Desire HD using xda premium
Perhaps Im not doing something right here, but i was under the impression that you had to be able to select 'allow external/third part software' and 'debugging' from x10's settings in order for the flash tool to do anything. As I cant access any of the x10's settings to turn these functions on, I cant use flash tool?
The only option available inside flash tool is 'flash' which has pre installed kernals from azuzu and when i select flash, it says the following:
flashing kernal.sin - flashing finished - now unplug device and power on - go to apps and select unknown sources and debugging.
Cant do anything as stuck on boot screen when powered on
In SEUS did you try the repair option? Try downloading and flashing a different kernel, I don't think you need debugging on to flash a kernel. Just don't plug phone in until it says to connect in flashmode
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
Flashed with azuzu kernal to point where it asks for power on and unknown sources and still in boot mode.
Just realised that when i power on the phone and connet it to flash tools it doesnt recognise the x10 but does when in flash mode - odd.
checked and laest drivers installed on pc but replaced them and still the same.
I am completely stumped and at the end of my rope now
Cant understand why service update recognised x10 and says latest firmware installed but cant boot.
With custom Rom it's normal for it to say it's 'up to date' but then find the repair button and press it. Without using repair SEUS only checks for stock Rom updates, if non stock Rom installed just says up to date
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
There doesnt appear to be a repair option after it has stated that it is running the latest software. There also doesnt seem to be an option prior too.
I really have had it now. Bringing a grown man to his knees!
I have never had so much trouble with a mobile divice and trying not to throw the paperweight against the wall now!
Dude we are sailing on the same ship.. I too got stuck at SE logo..
Tried what all i can do..
Sent from my GT-S5360 using xda premium
managed to find repair option. all goes well untill download bit. select model of phone then i get a message saying 'sorry, no software available for x10, please try again later' . . . . . WTF!
seriouslt stressed onboard this two man ship!
Try this
Try this link. I hope it helps you
http://forum.xda-developers.com/showthread.php?t=1104108
Guys, no need to panic If you don't mind losing your data, as far as I can see you have flashtool installed, then:
1.- download the generic firmware for your phone (I'm sure you don't really wanna have you carrier branded crapware...errrrrrr..... firmware) you can find it here http://forum.xda-developers.com/showthread.php?t=920746, in case you get lost, just get it from here http://minus.com/mAla782XK/1f
2.- inside flashtool you'll find several folders, unrar your firmware (X10i_3.0.1.G.0.75_1241-1846.ftf ) inside firmware folder, do not connect your phone yet
3.- run flashtool and click on "flash" icon, pick flashmode, then OK
4.- On the left side select your firmware and hit OK
5.- It will say "preparing files for flashing"
6.- A window giving you instruccions will pop up, just press and hold the back button on your phone, connect the USB cable (which is already connected to PC, of course ) and don't let go the button until you read flashtool started to flash
7.- wait 'till it finishes (praying will help........., well maybe not, but will keep you busy haha)
8.- It will only take a few minutes, the only moment it seems it's stucked is when is flashing "system" , don't worry, it takes a little longer that the other files.
9.- after is done, just unplug, turn it on and wait, don't forget first boot always takes a little longer too!!!!!!
10.- If you want to, use flashtool to root your phone and install xrecovery afterwards, that's it, brand new
Hope it helps and is clear enough, any question just ask, I'm usually here, either on home or phone
Sorted it. I downloaded an early version of flash tool (0.7.1.0) and put a stock .ftf in firmware file. flashed like a charm.
X10 no longer bricked
THANK YOU ALL FOR YOUR HELP
bradfordbear97 said:
Sorted it. I downloaded an early version of flash tool (0.7.1.0) and put a stock .ftf in firmware file. flashed like a charm.
X10 no longer bricked
THANK YOU ALL FOR YOUR HELP
Click to expand...
Click to collapse
Hooray!!!!! Good job!!
Sent from my Desire HD using xda premium
Saved my hide!!
OMG OMG!! I have been searching for days for the right mix of tricks. I kept hitting road blocks with the megaupload debacle - so THANK YOU THANK YOU for linking and posting the .ftf file.
nrgmaster said:
Guys, no need to panic If you don't mind losing your data, as far as I can see you have flashtool installed, then:
1.- download the generic firmware for your phone (I'm sure you don't really wanna have you carrier branded crapware...errrrrrr..... firmware) you can find it here http://forum.xda-developers.com/showthread.php?t=920746, in case you get lost, just get it from here http://minus.com/mAla782XK/1f
2.- inside flashtool you'll find several folders, unrar your firmware (X10i_3.0.1.G.0.75_1241-1846.ftf ) inside firmware folder, do not connect your phone yet
3.- run flashtool and click on "flash" icon, pick flashmode, then OK
4.- On the left side select your firmware and hit OK
5.- It will say "preparing files for flashing"
6.- A window giving you instruccions will pop up, just press and hold the back button on your phone, connect the USB cable (which is already connected to PC, of course ) and don't let go the button until you read flashtool started to flash
7.- wait 'till it finishes (praying will help........., well maybe not, but will keep you busy haha)
8.- It will only take a few minutes, the only moment it seems it's stucked is when is flashing "system" , don't worry, it takes a little longer that the other files.
9.- after is done, just unplug, turn it on and wait, don't forget first boot always takes a little longer too!!!!!!
10.- If you want to, use flashtool to root your phone and install xrecovery afterwards, that's it, brand new
Hope it helps and is clear enough, any question just ask, I'm usually here, either on home or phone
Click to expand...
Click to collapse
I formatted my system,data,cache,dalvik cache and didnt install any custom rom and rebooted directly
now it is stuck at the sony logo,I was using Ex MIUI v4 (ICS)
my bootloader was locked..
I tried connecting to flashmode in flashtool and in SEUS,but the phone isnt detected..
PLZ HELP ME
anivesh93 said:
I formatted my system,data,cache,dalvik cache and didnt install any custom rom and rebooted directly
now it is stuck at the sony logo,I was using Ex MIUI v4 (ICS)
my bootloader was locked..
I tried connecting to flashmode in flashtool and in SEUS,but the phone isnt detected..
PLZ HELP ME
Click to expand...
Click to collapse
Can you explain with more detail about "connecting to flashmode in flashtool" ?
I read in some posts-connect your phone to flashtool and flash the stock firmware files to get back your phone
I connected my phone with the volume key down to flashtool,but it stated an error and didnt proceed..
You erased everything, obviousely. But Flashtool should still work.
I'll go searching for a user who I know already did the same as you... maybe he'll have useful information
EDIT
Which error?
Feanor88 said:
You erased everything, obviousely. But Flashtool should still work.
I'll go searching for a user who I know already did the same as you... maybe he'll have useful information
EDIT
Which error?
Click to expand...
Click to collapse
It says ERROR-
thats it
Which sony logo, The first at boot or the boot animation one?
Are you able to boot your device in clockworkmmod?
Ok, let's do this:
-Start Flashtool
-Plug USB cable to PC
-Turn off the phone
-Press and hold volume down button
-Plug microUSB to the phone
-Post the complete Flashtool log
By the way, did you install flashmode drivers?
hsrbnr said:
Which sony logo, The first at boot or the boot animation one?
Are you able to boot your device in clockworkmmod?
Click to expand...
Click to collapse
He formatted everything, CWM included.
I installed the flashmode drivers..
It gets stuck at the black sony logo at the start and does nothing,I had to switch it off after removing the battery..
When I connect the phone in flashmode,it says error and says device disconnected and then the phone remains at sony logo..
I'll post the log soon
GOOD NEWS!
I tried flashtool again and this time it WORKED!!
THANK YOU TO ALL
p.s-Now I'm on stock GB .58
Try to flash a different ftf file and see, preferentially an old GB Build.
If this doesn't work,
Try updating to latest Flashtool.
Install the exe at /flashtool/drivers folder.
Then flash again.
Thanks,
Rick
Edit: Okay, never mind. It's done.
DragonClawsAreSharp said:
Try to flash a different ftf file and see, preferentially an old GB Build.
If this doesn't work,
Try updating to latest Flashtool.
Install the exe at /flashtool/drivers folder.
Then flash again.
Thanks,
Rick
Edit: Okay, never mind. It's done.
Click to expand...
Click to collapse
Actually I was first flashing the ICS .ftf file,then I flashed the .58 GB build and then it worked..
thanks for your response anyway
Hello
My phone: sony ericsson experia Neo (MT15i)
I tried to instal CM9 but something went wrong and now i cant start my phone.(normal, recovery nor fastboot)
I downloaded CM9, extracted the boot.img file, and placed it in the fastboot folder.
Then i placed the Zip and the google apps on the SD-card.
I then rebooted the phone in Fastboot and flashed the boot.img file.
Everything looked like it went fine but the phone wasn't rebooting. I've tried alot of things now but nothing works.
The only thing that happens when I try to put on the phone is the slight vibration in the beginning and then nothing happens.
Can somebody please help me? I cant even go in recovery with CWM
I also had this problem with CM 9. You just have the flash the old kernel back. Or you can flash the whole firmware again: http://talk.sonymobile.com/thread/35239
Edit: with Flashtool.
I would have tried that, but the problem is i cant go into flashmode anymore. Nothing works.
Fastboot?
Doesn't work either
GleDel said:
Doesn't work either
Click to expand...
Click to collapse
Follow these steps
1.Download Sony Ericssion Update Service (SEUS)
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
3.If this does not work remove the battery and put it back again and do step no 2.
4.SEUS will detect ur phone and install the latest ICS i.e.4.0.4
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
samneov said:
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
Click to expand...
Click to collapse
2)why volume down?
5)seus nor pcc doesn't relock bootloader, plus if he unlocked it via official way, he won't be able to use pcc nor seus.
@OP: what happens when you try connecting in fastboot mode? No blue led? Hows your phone named in device manager?
@madfysh
I had the same problem with that CM9 kernel and I had unlocked bootloader & I recovered my phone using SUSE by the same process I wrote that's y I suggested him those steps
Sent from my MT11i using xda app-developers app
samneov said:
Follow these steps
1.Download Sony Ericssion Update Service (SEUS)
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
3.If this does not work remove the battery and put it back again and do step no 2.
4.SEUS will detect ur phone and install the latest ICS i.e.4.0.4
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
Click to expand...
Click to collapse
I will give this a try.
I think there might be a problem with the Trim Area though. I have been looking for a solution but it seems hard.
Madfysh said:
2)why volume down?
5)seus nor pcc doesn't relock bootloader, plus if he unlocked it via official way, he won't be able to use pcc nor seus.
@OP: what happens when you try connecting in fastboot mode? No blue led? Hows your phone named in device manager?
Click to expand...
Click to collapse
I was thinking there was a trim area problem so I was looking for a solution.
At first there was nothing, no device recognized when I attached it to a pc. No flastboot, no flash, no recovery, no leds, nothing at al (exept for a slight vibration in the beginning).
Then I followed the method for unlocking the boot loader with testpoint and then te pc recognized the device as a neo. But thats all. Nothing more, stil no reaction when i try to turn the phone on in any way.
I disconnected the device and now when I reconnect it it isn't recognized anymore.
GleDel said:
Hello
My phone: sony ericsson experia Neo (MT15i)
I tried to instal CM9 but something went wrong and now i cant start my phone.(normal, recovery nor fastboot)
I downloaded CM9, extracted the boot.img file, and placed it in the fastboot folder.
Then i placed the Zip and the google apps on the SD-card.
I then rebooted the phone in Fastboot and flashed the boot.img file.
Everything looked like it went fine but the phone wasn't rebooting. I've tried alot of things now but nothing works.
The only thing that happens when I try to put on the phone is the slight vibration in the beginning and then nothing happens.
Can somebody please help me? I cant even go in recovery with CWM
Click to expand...
Click to collapse
Use Flashtool, flash an Official Global ftf from SONY, then let it boot up. It will work. Only way to do it. PM me if needed
Is this the OFFICIAL CyanogenMod 9 RC1? The boot.img does not work. Use the boot.img from FXP's Unofficial CyanogenMod 9. It works. Personally though, use FXP's CM9 cause it's working better then the official one.
Before using the full restore method (The Flashtool thing) try flashing the boot.img from FXP first. Still doesn't work? Flash official, boot-up, turn off, flash FXP kernel, full-wipe, flash ROM, reboot.
My Phone is fixed.
Alejandrissimo helped me with rebuilding the Trim Area.
Everything works fine now, except connecting to 3G/HSDPA. I used to be able to connect to it but now it doesn't anymore.
Does someone knows a solution for that?
bricked
can you also help me my bricked neo v...im from .238 and i upgrade to .62 from update center...when downloading is done..i press install then my phone goes black....i try it to on sometimes, it vibrates but phone does not boot,always black screen....i try and tried to on but it stopped on vibrating..my phone have no response at all i try to reflash a rom in flash tool but it does not work the still dont boot
PLEASE HELP ME... :crying:
GleDel said:
My Phone is fixed.
Alejandrissimo helped me with rebuilding the Trim Area.
Everything works fine now, except connecting to 3G/HSDPA. I used to be able to connect to it but now it doesn't anymore.
Does someone knows a solution for that?
Click to expand...
Click to collapse
hey,, could u give me some tips that the way to my bricked neo.. . i have tried a lot of ways.. it really hit me:cyclops:
Hello, Please help!!!
I was trying to unlock my bootloader on my Xperia X10 with qsd8250_semc cmd. and Flashtool. after unlocking, my phone refused to boot up. It doesn't even show the usuall sony ericsson splash screen. When trying to flash back to stock firmware with flashtool, flashtool recognizes the phone when connected in flashmode, but then trying to flash, flashtools shows "Error flashing. Aborted" when it gets to 'Flashing Loader'. Please I need help. What do I do?
Yoozeey said:
Hello, Please help!!!
I was trying to unlock my bootloader on my Xperia X10 with qsd8250_semc cmd. and Flashtool. after unlocking, my phone refused to boot up. It doesn't even show the usuall sony ericsson splash screen. When trying to flash back to stock firmware with flashtool, flashtool recognizes the phone when connected in flashmode, but then trying to flash, flashtools shows "Error flashing. Aborted" when it gets to 'Flashing Loader'. Please I need help. What do I do?
Click to expand...
Click to collapse
Hi mate just use Sony Ericson Update Service.
Google Seus, or Sony Ericson Update Service
Just download it and start it up, and then follow the instruction's on screen.
It's Very easy to go back to stock rom.
A lil more help please
doodownunda said:
Hi mate just use Sony Ericson Update Service.
Google Seus, or Sony Ericson Update Service
Just download it and start it up, and then follow the instruction's on screen.
It's Very easy to go back to stock rom.
Click to expand...
Click to collapse
Thanks for your reply. I tried using PC Companion to revert to stock rom. but it seems Sony PC companion only detects my phone in kind of an offline mode 'cuz it doesn't show my phone name after connecting in flash mode and then when I click 'Start' on the 'Update Software' module it just shows a blank screen with only 'Back' at the left corner. am I missing something? Please can anyone help me with a step by step procedure on how to go about it
Yoozeey said:
Thanks for your reply. I tried using PC Companion to revert to stock rom. but it seems Sony PC companion only detects my phone in kind of an offline mode 'cuz it doesn't show my phone name after connecting in flash mode and then when I click 'Start' on the 'Update Software' module it just shows a blank screen with only 'Back' at the left corner. am I missing something? Please can anyone help me with a step by step procedure on how to go about it
Click to expand...
Click to collapse
Hi mate just use Sony Ericson Update Service.
Google Seus, or Sony Ericson Update Service
I use Ver - update_service_setup-2.11.4.11 And Sony Ericsson Update Engine v2.11.7.13
Try to get an one of these version's :good:
I think u miss the steps required to unlock
Sent from my X10i using xda app-developers app
Yoozeey said:
Hello, Please help!!!
I was trying to unlock my bootloader on my Xperia X10 with qsd8250_semc cmd. and Flashtool. after unlocking, my phone refused to boot up. It doesn't even show the usuall sony ericsson splash screen. When trying to flash back to stock firmware with flashtool, flashtool recognizes the phone when connected in flashmode, but then trying to flash, flashtools shows "Error flashing. Aborted" when it gets to 'Flashing Loader'. Please I need help. What do I do?
Click to expand...
Click to collapse
I copy and pasted this from another post of mine
Depending on what version of Flashtool you use! Get this one - flashtool-0.9.10.1-windows
Install flashtool and driver's from flashtool folder.
Connect and make sure your phone is recognised
Click the padlock symble to root your phone. If anyone else is doing this, as you said your already rooted
If you want to install recovery you can! click on the white cross on black background symble second from the right.
If your Bootloader is not unlocked click plugins you can unlock bootloader from there. Check if its Possible for your phone!
If it is already unlocked you wont get the menu from plugins.
Remember google is your friend find that version of flashtool - S1 tool
And use S1 tool to check if you can unlock your bootloader someone may know another tool
Goodluck
Hello guys, today it's a really bad day for me. My M4 is now totally bricked.
Here's why:
I installed CM 12.1 and I will get back to stock, but my phone not enter in flashmode. So I flashed a zip file of stock rom but it not booted. I want to get Flashmode back, and I find a flashable zip that restore flashmode in Sony Xperia M. I flashed it and... bye bye M4. Now the phone only enter in SOMC FLASH DEVICE, Flashtool not flash, but say:
Device connected with USB debugging OFF. For 2011 devices line be sure that you aren't in MTP mode.
Sometimes enter in Unkown device. I have all drivers and I'm using original cable with USB 2.0 port. Now I'm trying to restore with PCC.
I removed the battery connectors for a while, put them back, but nothing changed.
My battery is at 100%.
What should I do?
So flash mode does not work anymore? This may seem inappropriate to say now that your phone is dead but if you have technical experience you could make a guide to opening and repairing the M4 or at least take pictures. But if flash mode or fastboot works try to restore it first
Well... Sorry to hear that :/ but uh..
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
It uses a MSM8939 board same as ours. It's up to you if you want to attempt it but I'm suggesting not to.. Good luck anyway!
Thank you very much! Firstly I will try to send it to the shop where I buyd (sorry my english) and if they don't change the phone I will try this. Really thank you again!
EDIT: Ok, I am following the tutorial, but my M4 show only qhsusb_bulk with no driver. What I have to do?
alby_var said:
Hello guys, today it's a really bad day for me. My M4 is now totally bricked.
Here's why:
I installed CM 12.1 and I will get back to stock, but my phone not enter in flashmode. So I flashed a zip file of stock rom but it not booted. I want to get Flashmode back, and I find a flashable zip that restore flashmode in Sony Xperia M. I flashed it and... bye bye M4. Now the phone only enter in SOMC FLASH DEVICE, Flashtool not flash, but say:
Device connected with USB debugging OFF. For 2011 devices line be sure that you aren't in MTP mode.
Sometimes enter in Unkown device. I have all drivers and I'm using original cable with USB 2.0 port. Now I'm trying to restore with PCC.
I removed the battery connectors for a while, put them back, but nothing changed.
My battery is at 100%.
What should I do?
Click to expand...
Click to collapse
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
samysimbu said:
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
Click to expand...
Click to collapse
probably you flashed custom kernel/rom with bootloader unlock=NO , you can try the S1 tool to restore your bootloader but you must have the original one.
PiSpecialist said:
probably you flashed custom kernel/rom with bootloader unlock=NO , you can try the S1 tool to restore your bootloader but you must have the original one.
Click to expand...
Click to collapse
Thanx for reply,
My bootloader status is yes.
I think wrong kernel makes this problem,
By the way, how s1 bootloader restore.
Any tools?
And how get original bootloader.
Is loader.sin is helpful from ftf?
Thank u.
I'm waiting for your reply
samysimbu said:
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
Click to expand...
Click to collapse
samysimbu said:
Thanx for reply,
My bootloader status is yes.
I think wrong kernel makes this problem,
By the way, how s1 bootloader restore.
Any tools?
And how get original bootloader.
Is loader.sin is helpful from ftf?
Thank u.
I'm waiting for your reply
Click to expand...
Click to collapse
you must have qhsusb_dload detected if yes then download this zip extract it and run s1tool, you must copy boot.sin and s1boot from your stock rom, the two files inside the zip are not for your C3, but you can try at your own risk.
PiSpecialist said:
you must have qhsusb_dload detected if yes then download this zip extract it and run s1tool, you must copy boot.sin and s1boot from your stock rom, the two files inside the zip are not for your C3, but you can try at your own risk.
Click to expand...
Click to collapse
Friend, Google Drive file need permission. I did leave request to the file owner. If u r the owner pls give permission to download access