Related
Phantomskinz just released their tf skinz w00t. I really like how smooth their screen protector is and how the carbonfiber chromatics look on. My evo shift.
Too bad they don't have a matching set for the dock or id be tempted to get the chromatics (maybe even the white one this time around) again. Guess I'm just gonna get the screen protector for now
Anyway, really recommend it, specially if you think the tf screen produces too much friction.
i dont need a signature
Looks like the Chromatics are $5 cheaper on Amazon.
Black Carbon Fiber: http://amzn.to/lP0lxm
White Carbon Fiber: http://amzn.to/k6dLT8
Didn't know they sold via amazon as well.
Either way...I just contacted them about skins for the dock and they said they don't have any plans for it. Not really interested in a half dressed tablet so I'm just gonna go with the screen protector.
Now to decide wether to get my tf replaced due to a single spec of dust under the screen...before I put the screen protector on.
Decisions decisions
i dont need a signature
Gbcue said:
Looks like the Chromatics are $5 cheaper on Amazon.
Black Carbon Fiber: http://amzn.to/lP0lxm
White Carbon Fiber: http://amzn.to/k6dLT8
Click to expand...
Click to collapse
Or you can just go with the Skinomi skins which are still cheaper and look very much the same
black
Silver
finalhit said:
Didn't know they sold via amazon as well.
Either way...I just contacted them about skins for the dock and they said they don't have any plans for it. Not really interested in a half dressed tablet so I'm just gonna go with the screen protector.
Click to expand...
Click to collapse
I contacted Skinomi and they were open (as in interested in) to the dock skin...
funnycreature said:
Or you can just go with the Skinomi skins which are still cheaper and look very much the same
black
Silver
Click to expand...
Click to collapse
Just purchased the clear whole body protection kit directly from http://www.skinomi.com/
I used the below online coupon and got 25% off with free shipping:
get25
I just hope that it will be easy to put on my tablet. I am so bad in doing these things...
funnycreature said:
I contacted Skinomi and they were open (as in interested in) to the dock skin...
Click to expand...
Click to collapse
That will be so awesome!!!
I sent them (phantomskinz) my tablet last week (they wanted it to take measurements and create the cuts.)
I should be getting it back tomorrow from them, I will post some closer pictures if anyone wants. I got the chromatics black applied by them.
calsonicshifter said:
I sent them (phantomskinz) my tablet last week (they wanted it to take measurements and create the cuts.)
I should be getting it back tomorrow from them, I will post some closer pictures if anyone wants. I got the chromatics black applied by them.
Click to expand...
Click to collapse
Nice, are you getting the skins free?
The skinomi skins look good as well, but I'm more interested in the screen protector, and more specifically, the texture of it.
How's skinomi in that regards?
i dont need a signature
skinomi has GREAT support.
Basically what happened was I got my skinomi carbon fiber silver
a week ago and my ASUS Transformer sadly had to go through an RMA
due to my speakers dead =/
I already applied the skin and now i have to remove them due to RMA.
I told skinomi this and they were able to resolve this issue and send me a REPLACEMENT for free.
Now thats great company right there and they should see my business from now on.
I didn't even had to return an old one or pay any shipping or deduction fees.
finalhit said:
Nice, are you getting the skins free?
The skinomi skins look good as well, but I'm more interested in the screen protector, and more specifically, the texture of it.
How's skinomi in that regards?
i dont need a signature
Click to expand...
Click to collapse
I like the screen protector although it is not as hard as others; it has a nice touch to it but is easily dented by fingernails etc.
funnycreature said:
I like the screen protector although it is not as hard as others; it has a nice touch to it but is easily dented by fingernails etc.
Click to expand...
Click to collapse
i noticed that as well with my evo shift. when applying the skin, trying to remove all the air bubbles, i might have pressed to hard on certain areas, and those parts of the skins are now a bit stressed.
that the only thing keeping me from getting it. although i wonder if that's the compromise to prevent the orange-peel effect some other skins have, and phatomskinz doesn't.
I just talked to phantomskinz and they say the protect does not reduce glare and that is one of the big things I want to improve. Can anyone confirm this?
DevCake said:
I just talked to phantomskinz and they say the protect does not reduce glare and that is one of the big things I want to improve. Can anyone confirm this?
Click to expand...
Click to collapse
It doesn't reduce glare. It is as shiny (the screen) as it is naked.
For those wondering, the carbon skin (and probably the clear one as well, although im not sure) is 9 pieces.
I attached some pictures of it installed. Sorry the pictures are not too clear. I had to reduce the size due to the upload limit for attachments. I can take the pictures again if someone wanted better ones.
wow..$35 dollars for stickers? these companies are minting money.
@skapur, well, it's not just a sticker. it comes with a clear screen protected, and the "sticker" is made of vinyl, and cut for the device. that being said, yea, way overpriced.
@cal
yes please. mind taking shots of the seams? also, do you have the dock? how does it look without matching bottoms? would you recommend it?
I don't need a signature.
Was really interested in getting a Phantomskinz, but alas, they don't ship to HK.
finalhit said:
@cal
yes please. mind taking shots of the seams? also, do you have the dock? how does it look without matching bottoms? would you recommend it?
I don't need a signature.
Click to expand...
Click to collapse
By seams, do you mean where the pieces end?
I just got the dock this week. It is a little snug, but I dont know if it is because of the skin+screen protector because I never got to try the dock without it on. The dock did leave a line of imprint on the bottom of the screen protector where the docking "v" or "u" slides over the tablet.
I think it looks a little funny without the dock having a matching skin, but I have gotten used to it.
Ive had the skin+ screen protector on for around 2 weeks now and nothing has peeled or anything. The only thing is that they cut around the speakers so the skin is very thin on the sides of it (on the screen and backside side) and it has folded inward. But not a major problem for me.
I bought this case:
http://www.amazon.com/rooCASE-Leath...KP1G/ref=sr_1_1?ie=UTF8&qid=1326056034&sr=8-1
I ended up returning it. It's a nice case, but it left scuff marks all over my NT. I haven't been able to remove the marks with Goo-Gone or isopropyl alcohol. Any ideas on how to clean the NT?
Same **** happened to mine not sure what to do about it tho.
OH wow, talk about timing - I was just asking this exact case in another thread on this very forum. Sorry to hear about that - hopefully you left a note in the reviews to warn others.
TheJanks said:
OH wow, talk about timing - I was just asking this exact case in another thread on this very forum. Sorry to hear about that - hopefully you left a note in the reviews to warn others.
Click to expand...
Click to collapse
Good call. I'll go ahead and do that sometime.
thanks for the warning, was going to pick up one of these since there's a ton of positive reviews for the nook color
Ugh thanks for the heads up. I checked mine and found 2 tiny marks. It's such a secured case though so I just taped the sides.
madlove02 said:
Ugh thanks for the heads up. I checked mine and found 2 tiny marks. It's such a secured case though so I just taped the sides.
Click to expand...
Click to collapse
Same here. Looks ugly when I take the device out of the case. But at the end of the day, I don't worry too much about it. I mean it is gonna always stay inside the case for me, ugly marks are all hidden.
I had this problem just leaving the nook in the box it came in. Where the microfiber was sitting on it, the edge turned black and scuffed. It's an unfortunate material choice. Probably better off to keep it in one in a case that covers the edges, so you won't ever see it.
Wow I bought the same case and got the same marks.
I also tried alcohol. Im at my wits end. Almost tempted to use some kind if abraisive, but dont want to hurt my nook's finish.
strictlyrude27 said:
I bought this case:
I ended up returning it. It's a nice case, but it left scuff marks all over my NT. I haven't been able to remove the marks with Goo-Gone or isopropyl alcohol. Any ideas on how to clean the NT?
Click to expand...
Click to collapse
Any updates on removing these scuff marks?
Mr clean magic eraser and alcohol.
C64assembly said:
Mr clean magic eraser and alcohol.
Click to expand...
Click to collapse
Seriously?
So, I bypassed this issue after hearing about the stain issue on the Roocase from this thread.
So, to get around the problem, I got an Otterbox Commuter, and put velcro on the back of it. It gives me Otterbox-level protection with the ability to have a stand that will hold it in portrait or landscape mode. Since the stand originally just uses velcro for this it functions exactly as it originally did.
I just got vecro adhesive tape from the local WalMart and put 2 strips on the middle part of the back of the Otterbox.
One thing I like about the case is that it has a little pocket that fits a microfiber screen cleaner cloth in a small plastic envelope.
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
I doubt there will ever be one. Unless you can talk joey3002 into making some again, but I think he's done with the covers.
You should wait and see what the phone looks like in person.
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
dozybolox13 said:
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
Click to expand...
Click to collapse
I agree 100%. I don't want to put a case on my EVO but definetly need to replace that ugly glossy black part. HTC should just have kept it matte black.
I'm going with an otterbox defender. I need a heavy duty case though. Have had an otterbox on my Eco 4 G since week two after it launched. Quality case.
I would pay $$$ to get one in CF..
Will
lacrossev said:
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
Click to expand...
Click to collapse
I want to do the same, but it looks like the camera lens part of it is going to be a PITA. Hopefully there will be third party covers available that will match the bottom half of the back.
URABUS0924 said:
I want to do the same, but it looks like the camera lens part of it is going to be a PITA.
Click to expand...
Click to collapse
That's what painters tape is for. If that cover is cheap enough to replace (in the unlikely event that I screw it up), I'll be going this route.
shellguy said:
I would pay $$$ to get one in CF..
Will
Click to expand...
Click to collapse
If the reason why that piece of the phone is plastic is due to the antenna placement, then replacing it with a cf piece may cause some signal attenuation as CF works as RF shielding for some applications, as i've read from RC model airplane forums where people discuss when and where to use CF in their planes.
also, NFC does not work without that specific cover in place. There are antennas and whatnot built into the thing. watch Phil Nickinsons quick walkthrough video on android central to see what I mean. he said that nfc definitely doesnt work without the cover on.
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Varekai said:
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Click to expand...
Click to collapse
Eh the issue that you will have is making sure that it is cut correctly.
Will
thats what that xo skins cf-look skin looks like. 3m di-noc would work pretty well as its thin enough to wrap around some basic curvatures like the one we have for the back cover. I've seen it wrapped around some crazy shapes without additional relief cuts or anything so it would be a good place to start if you don't want to pay the 15 bucks for a few pieces of that material pre-cut for the phone.
I have 2 small rolls of the CF Di-Noc in both silver and black. Will upload pics as soon as I can get it laid down. Now to decided which color.
Sent from my Nexus S 4G using xda premium
So I wasn't too big of a fan of the Midnight Blue color, but it was the only color available from T-Mobile, so I went with it. I purchased a white back cover from ebay and this is how I swapped it out.
Link to back purchased:
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
First is the replacement cover itself. It comes with adhesive already applied and a blue cover to be removed before sticking on.
To take the cover off the Nexus 6 I used a dull razor blade, as it was the only thing I could find that wold fit between the back cover and the metal housing. I stuck it in the bottom corner because I thought it would make it easier to peel up. I also put a piece of electrical tape at the point where the razor would touch the metal housing to avoid chipping the metal.
WARNING!!!! There is a ribbon next to the power and volume buttons that will pull up with the cover when removing make sure to use your finger to hold it down as you pull on the cover. Take your time.
Peel off protective cover of new back and stick on . Pretty simple.
Finished.
I do like it wayyyy better than the midnight blue back color. The blue was too boring for me and I am actually liking the 3 tone with white,black and blue. However, once they release the housing I will replace with the housing shipped on the Cloud White model to get rid of the blue. Also remember cloud white is slightly off white so don't a bright white. And thanks to ifixit for the instructions for removing back cover.
And FYI, the white cover has the same texture as the blue. It is also a fingerprint magnet as well, but less visible in most lighting due to the color.
Nice, thanks for sharing. Pics r a little small but still helpful.
Sent from my Nexus 6 using Tapatalk
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
bigmike2424 said:
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
Click to expand...
Click to collapse
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
natezire71 said:
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
Click to expand...
Click to collapse
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Nice, thanks for the write up, especially the part about the ribbon cable. I ordered a new one on Dec 1 but the tracking hasn't updated since the 4th so who knows when I'll get it.
Edit - Looks like it showed up in Chicago today. Maybe tomorrow I'll have it.
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
This is why I got a new one. My new Nexus 6 from Sprint came with a few of those scuffs on the back almost like they used the phone as a hockey puck and slid it across the floor before packaging it or something. Nothing I have done has created anything like those scuffs so I am not sure what these phones went through during assembly. I knew the back covers would be cheap since there isn't even an NFC tag or anything attached to them.
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Pilz said:
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Click to expand...
Click to collapse
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
bigmike2424 said:
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
Click to expand...
Click to collapse
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Pilz said:
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Click to expand...
Click to collapse
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Thanks. That's good to know because I'm sure I will be replacing it at some point (I have no case and the back cover will surely get scratched up at the minimal contact point)
PaisanNYC said:
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Click to expand...
Click to collapse
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Pilz said:
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Click to expand...
Click to collapse
PlastiDip
Pliind said:
PlastiDip
Click to expand...
Click to collapse
Someone tried that with the dbrand skin and it started to flake after a couple of days.
Pliind said:
PlastiDip
Click to expand...
Click to collapse
I have to agree, PlastiDip doesn't work well for something being handled as much as a phone, even if you sandpaper the item for better adhesion before painting
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
radeonboy said:
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
Click to expand...
Click to collapse
Shipping from NJ only took 3 days to get to me in Texas.
Thanks for this. Just ordered one!
does anyone know if replacing the white back with one of these blue ones will void any kind of warranty?
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.