Related
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
Hey I'm new to android, just got a vibrant last week. Decided to unlock it as I travel a lot. The unlock worked, but now I'm having issues with my wifi. I can connect to a wireless network but I cant load pages. The wireless signal is strong and I tried with different routers, but still no luck. Looked through the forum and googled it but couldn't find a solution. If some one could please help with this, it would be much appreciated
try clearing your current wifi settings including remembered connections, passwords, and everything else...then re-scan for networks all over again, that's all I can think of for now
By that you mean just gong into settings->wireless and networks->wifi settings and then just forget the net work, rescan, and rejoin the network? If so, I did that but am still getting the same result. If you can think of anything else or if I didnt do what you suggested correctly please let me know. Thanks
srah said:
By that you mean just gong into settings->wireless and networks->wifi settings and then just forget the net work, rescan, and rejoin the network? If so, I did that but am still getting the same result. If you can think of anything else or if I didnt do what you suggested correctly please let me know. Thanks
Click to expand...
Click to collapse
yeah, thats what I meant :/....hmmm...sounds like your connection is working, can you download stuff from the market or is it just the browser? cause I unlocked mine too and wifi works fine
No I cant download anything from the market. I cant do anything that requires an internet connection, but it does show that I am connected to a network.
srah said:
No I cant download anything from the market. I cant do anything that requires an internet connection, but it does show that I am connected to a network.
Click to expand...
Click to collapse
hmmm...im out of tips then ...perhaps some other members can be of more assistance
I sure hope so, thanks for your help
Have you been able to try another network? My first thought was it was in Ad-Hoc mode but I could be wrong. If nothing else restore to stock firmware and then try a different unlock.
Happened to me too. It would show the wifi icon on the notification bar but wouldn't load pages. I'd go to the settings and it'd say can't turn off wifi or can't turn on wifi. And when it was "on" I'd say connecting to modem then it'd just stop. When I was using the browser on wifi it would load a page even when I had full bars. I had to turn it off then back on to load another page. Is this similar to the problem your having?
Sent from my SGH-T959 using XDA App
I hope this doesn't sound stupid but yesterday I uninstalled Advanced Task Manager and poof my wifi started working again. The phone also seems to suffer from less occasional lag without it installed, but that's another story for another thread. Prior to this I had to manually turn my wifi connection off and on, but even that didn't always work. Since the uninstall I have not my wifi connection once. I am currently using the stock rom, rooted with minor adjustments here and there.
hi guys, i also have this problem.
i will be taking the phone in to the tmobile store on thursday.
it shows that i am connected via wifi; however, anything that requires an internet connection does not load.
very frustrating, since just yesterday i used the samsung kies software to tether a network for my laptop. i was testing the capability of the vibrant to act as a modem, and it worked just fine.
any help would be appreciated!
thank you
Charlie
connected but not connected
I also have this problem.
In my Vibrant shows that i connected, but i can not load pages. Someone
found any solution to this problem?
Hi all,
This is happening to me too. Rebooting seems to get Wifi working correctly again. But the problem comes back eventually.
Maybe a bug in the latest JI6 update?
Wi-fi problem.
Someone found any solution for this problem?
Froyo's update will fix this issue?
Thanks.
i hang on you **** iphone users they just bay for its cool smartphone **** iphone android is the king
The ad revenue from this app has passed the $25 mark -- what it cost me to register with Google to put the app in the market. As promised, any revenue the app earns from that point forward will be added to my annual donation to the Baypath Humane Society of Hopkinton, Massachusetts -- a no-kill shelter.
Thanks from me and thanks from the kittens and puppies.
----------
I've written a widget to establish a PAN connection between the Nook a phone. It grabs the first networking-capable device it finds in the list of pairings. A couple of things to note:
There is an application. All it will do is show you what device, if any, it can connect to. It has to turn on Bluetooth to get the list, but it will politely ask you before doing so.
The widget will turn on Bluetooth, but it isn't so polite. For the life of me, I can't find a code snippet nor can I think of one that will start the polite activity (or any activity) from a widget that doesn't directly involve a button press. If anyone has such a snippet, I'd love to see it. I know its possible because the Bluetooth GPS widget does it. Fixed!
The widget, of course, requires root.
I do send a Toast when the process is complete, but toast from my widget isn't reliable. I need to figure that out, too... advice is welcome. Fixed!
Still to do: Monitor the connection and reflect the status in the widget. Fixed!
If nothing else, it's prettier than a GSCript script. Once it's stable and complete, I'll stick it in the marketplace.
Note... You must be running CM7 and you must have already paired the phone before you can use this....
Apr-13: New version with better Bluetooth device state management.
Apr-17: Added connection monitoring, polite Bluetooth enabling
Note: The pop-up to grant superuser access is asynchronous, so there may be a timing window on first use where state is not correctly monitored. I'll try to work that out, but in the meantime, all subsequent uses should work.
The icon will display a yellow LED during the connection process and a green one once the connection is going.
If a connection could not be established, the LED may go briefly green, then turn off. The challenge is that the only way I can monitor the connection is with "pand -l" or "ifconfig bnep0" and if the connection is gone, the attempt to read the result from those commands simply hangs. So, I start a thread and then periodically run "pand -l". A different thread monitors the first and, if it looks stuck, I kill the process and turn off the LED. But, until I can be sure it's really stuck and not just taking time to answer, the LED will be green. Fixed!
Obviously, once the connection is broken, the LED will go off.
Since I have the LED, I've taken out most of the toast, though some still comes from the OS.
Apr-19 Fixed the widget graphics so the LED turns off instead of disappearing. Fixed the green-before-failed connection status issue. Added a proper toggle -- if the connection is off, tapping the widget turns it on and if the connection is on, tapping the widget turns it off.
Apr-20 The official version is now in the Market:
https://market.android.com/details?id=earlmagnus.nctether
May-27 Fixed a null pointer issue discovered by Ophbalance
As always, feedback is welcome.
Could you accomplish the blue tooth polite toggle with a conditional method?
Check blue tooth status,
if off, direct user to settings-> blue tooth
I know thats not as cool as a nice button press
Downloadin ur app now!
One other oddness...
... Android doesn't seem to think the tethered connection is worthy of note. If you start the browser after being connected, you'll be told you have no connection. Pages will load perfectly well, anyway.
sinanju said:
... Android doesn't seem to think the tethered connection is worthy of note. If you start the browser after being connected, you'll be told you have no connection. Pages will load perfectly well, anyway.
Click to expand...
Click to collapse
I'm pretty sure it's because Android does not natively have bluetooth DUN capabilities, at least input-wise; it's based on functions within custom kernels, and therefore the system does not recognize it as a connection capable of fueling GApps.
But I could be completely wrong / that information could be outdated; this is from my research into Bluetooth DUN for my Nook when I first got it a while ago, and I'm not much of a developer. I'd more call myself someone who likes dabbling with code, and watching everything break.
But back to this post's point: thank you so much, you are a god. I've been looking for an easier way to do this for so damn long.
Kudos, sir. Kudos.
This is very promising! Now, what is the feasibility of adding Bluetooth DUN support? A number of phones out there (to include Blackberries) do not support PAN. I've done a lot of googling and have come across one resource, which may or may not be useful: https://github.com/wertarbyte/android_vendor_cyanogen/blob/omni-tether/prebuilt/common/bin/tether
The "pand" binary is included with the CM7 ROM, but "dund" is not. How much effort would be involved in adding this functionality?
Thanks in advance and appreciate any guidance..
exactly what i was looking for.
Thanks a lot for this. Will be installing and tethering to my iphone via mywii
I will report back with results.
anonim1 said:
This is very promising! Now, what is the feasibility of adding Bluetooth DUN support? A number of phones out there (to include Blackberries) do not support PAN. I've done a lot of googling and have come across one resource, which may or may not be useful: https://github.com/wertarbyte/android_vendor_cyanogen/blob/omni-tether/prebuilt/common/bin/tether
The "pand" binary is included with the CM7 ROM, but "dund" is not. How much effort would be involved in adding this functionality?
Thanks in advance and appreciate any guidance..
Click to expand...
Click to collapse
DUN is in a whole different ballpark. I don't know what's involved.
Thanks, folks, for trying it out. I have an idea for monitoring connection status, but other than some POC work, I probably won't get to it before the weekend.
It doesn't work for me, it says tethering then tethered and then starts tethring again and this goes on quite sm time and then the internet doesn't work, i really needed this:-(
am running pherimod 5.3 and trying to tether with sony erricsion's k530i which has bluetooth networking.
rigy73 said:
It doesn't work for me, it says tethering then tethered and then starts tethring again and this goes on quite sm time and then the internet doesn't work, i really needed this:-(
am running pherimod 5.3 and trying to tether with sony erricsion's k530i which has bluetooth networking.
Click to expand...
Click to collapse
Does the application show the the phone and its BT address?
Is there a particular app you have to start on the phone before you begin tethering and, if so, does it show status if a link is established?
EDIT: Also... have you used the phone for tethering before with a laptop? Do you know tethering should work?
For the life of me, I can't think of anything that would make it loop through connection attempts other than mashing the widget repeatedly.
sinanju said:
Does the application show the the phone and its BT address?
Is there a particular app you have to start on the phone before you begin tethering and, if so, does it show status if a link is established?
EDIT: Also... have you used the phone for tethering before with a laptop? Do you know tethering should work?
For the life of me, I can't think of anything that would make it loop through connection attempts other than mashing the icon repeatedly.
Click to expand...
Click to collapse
Yes phone and address are both shown, i start tethring by taping the widget and as for the status i see nothng xcpt bluetooth icon, which shows that both the devices are connected. But am trying this with a gprs connection. i havent tried 3g yet, will that be any different?
Yes the phone has bluetooth tethring, the pc suite has a module for bluetooth internet.
I've attached a new version in the OP. Have a try.
I've improved managing the Bluetooth device. Final state of the connection still isn't reported... that will have to wait.
I would remove the widget and uninstall the old app before installing the new version.
Hm... pand --nodetach doesn't do what I hoped it would in a --connect context... So much for that idea.
I'm trying to use this app to tether my nook to my moto Droid. When I tap the widget it says there's no paired PAN device. I've tethered these two before using the pand command, so I know it's possible. Am I doing something wrong? The droid and nook are "paired but not connected", but every Bluetooth device has said that.
Sent from my NookColor using Tapatalk
Calla969 said:
I'm trying to use this app to tether my nook to my moto Droid. When I tap the widget it says there's no paired PAN device. I've tethered these two before using the pand command, so I know it's possible. Am I doing something wrong? The droid and nook are "paired but not connected", but every Bluetooth device has said that.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
They were probably paired while the droid wasn't advertising the profile. I rely on the list of paired devices knowing which is the network provider.
Try this:
- Remove the Droid from the list of paired devices on the Nook
- Enable visibility on the Droid
- Get the Droid ready for a PAN connection
- Then, from the Nook, initiate pairing
That should ensure the Nook sees the Droid can provide a network connection.
Now I just need my phone to just advertise the bluetooth network without having to run wifi tether.
painter_ said:
Now I just need my phone to just advertise the bluetooth network without having to run wifi tether.
Click to expand...
Click to collapse
Nothing WiFi related will help you.
My WinMo 6.5 phone just shows a list of nearly a dozen profiles it supports, PAN being one of them. My suggesting about getting the phone ready for PAN before pairing came from my experience setting up my Ubuntu system as a tethering client. Both that and the Nook recognized the PAN profile when I did that.
The only app I could find that supports bluetooth tethering and is reliable on my HTC Hero is wifi tether set up in bluetooth mode. I have been using it for over a year with my netbook.
What would make the bluetooth tethering the cat's ass would be to not to have to start anything on the phone, for the connection to always be available so i could just wip out the nook and be able to use the data connection.
painter_ said:
The only app I could find that supports bluetooth tethering and is reliable on my HTC Hero is wifi tether set up in bluetooth mode. I have been using it for over a year with my netbook.
What would make the bluetooth tethering the cat's ass would be to not to have to start anything on the phone, for the connection to always be available so i could just wip out the nook and be able to use the data connection.
Click to expand...
Click to collapse
Can't help you there... that's up to the phone.
In my case, it's an HTC Topaz and I have to start an app on that, too...
I am happy to report it works well with mywii running on my iphone and tethering from the nook.
Did not have any issues at all. And yes, i did have to hold my iphone the right way
So judging by the quick search, many people have this problem on many different phones, and no solution was found.
I know I've had this problem with my old SGS 1, and even Nexus One.
Same problem on my SGS II, tethering to many different desktops and laptops.
So it seems to be android-specific, or Windows specific problem, really.
Basically, when you tether with USB, first several minutes all is well and speed is good, but in about 5-10 minutes, traffic from the phone just stops.
Phone still shows tethering ON, PC still thinks it's connected, but nothing loads, it doesn't disconnect, it just drops to speed or 0 kbps.
The only way to restore it is to disable tether and reconnect.
Anybody has any idea why would this occur and how to prevent it?
Does it say no internet connection on the network indicator on the bottom right of the notification center? My guess is your carrier has an issue with tethering. I see your on AT&T. Do they have a plan that is specifically for tethering?
Braidonh said:
Does it say no internet connection on the network indicator on the bottom right of the notification center? My guess is your carrier has an issue with tethering. I see your on AT&T. Do they have a plan that is specifically for tethering?
Click to expand...
Click to collapse
No internet connectivity loss is indicated in windows, it still thinks it has a good internet connection. I'm assuming that after a while, it will detect that although there's a connection, there's no actual traffic flowing through it, and will say that there's an issue... but for a long time, it's simply as if I'm connected, but actual speed is at 0kbps.
Browser tries to load pages and times out in 10-30 seconds.
Unfortunately (or fortunately) this definitely doesn't have anything to do with AT&T. I have unlimited grandfathered plan with AT&T and a custom rom, AT&T has no idea that I'm tethering. Internet on the phone is still working fine.
I kinda feels as if the usb tether drivers in windows (RDIS or whatever it's called) simply gives up after a while. Or maybe it's the android tether process that "forgets" what it's supposed to be doing.
you are running a stock ROM right?
RorixRebel said:
you are running a stock ROM right?
Click to expand...
Click to collapse
Nope, latest CheckROM.
But as I've said, I had same problem with Captivate and other ROMs on SGS2 =(
i haven't found a custom rom where tethering fully works....thats why i went back to stock
Have the same problem on BOTH my Huawei ideos U8150 and my HTC sensation.
My wirelessly tethered devices still work flawlessly but my USB tethered desktop disconnects after a few minutes. Screen time out set to Max in case something in the phone went to sleep but no difference. Definitely not a network problem as my operator confirmed but an android (or windows problem) .
I even set USB Port power settings to always stay awake.
Hope we can find a solution to this.
Sent from my HTC Sensation Z710e
i got the same problem under ICS. tried on stock ZSLPE and custom XXLPQ firmwares. both do not work!
my stock gingerbread was able to work flawlessly without disconnection problem on the same pc. wtf is happening?!
I have Samsung Galaxy S Plus.
I am facing exactly the same problem.
Have tried different ROM's around 5, 3 were custom ROM's.
Looks like Android OS issue.
abhijit_net said:
I have Samsung Galaxy S Plus.
I am facing exactly the same problem.
Have tried different ROM's around 5, 3 were custom ROM's.
Looks like Android OS issue.
Click to expand...
Click to collapse
I had this problem on both my Samsung Charge(Stock app 2.3.6), and my Motorola Razr(Stock app 4.0.4). I believe it is a driver issue inside windows. It seems less of a problem on the Motorola phone as I get a few hours of USB tether before it exhibits the same problem whereas the charge started after a couple of minutes. ie. Phone has data and can access web, computer thinks its connected to the web and okay, but any attempts to connect to the internet from the pc fails.
The wireless tether works fine and does not exhibit the same issues so I would suggest you use wifi tether. I don't know if wifi tether uses more or less power than usb tether (assuming your phone is connected to computer and charging). If I get some more free time in the next few weeks I might try and do an analysis.
listlessloki said:
I had this problem on both my Samsung Charge(Stock app 2.3.6), and my Motorola Razr(Stock app 4.0.4). I believe it is a driver issue inside windows. It seems less of a problem on the Motorola phone as I get a few hours of USB tether before it exhibits the same problem whereas the charge started after a couple of minutes. ie. Phone has data and can access web, computer thinks its connected to the web and okay, but any attempts to connect to the internet from the pc fails.
The wireless tether works fine and does not exhibit the same issues so I would suggest you use wifi tether. I don't know if wifi tether uses more or less power than usb tether (assuming your phone is connected to computer and charging). If I get some more free time in the next few weeks I might try and do an analysis.
Click to expand...
Click to collapse
I've had this problems with pretty much every Samsung phone I had.
I have HTC One X now, and it doesn't have this problem. So something with Samsung drivers, I think.
Cool fact - HTC even has a one-click reverse tethering. So cool.
I have the same problem, but can't find out, where (windows or android) is it.
What I have:
Motorola Atrix (rooted with SuperOneClick, stock ROM)
PC with Windows XP x64 without WIFI
The only RNDIS drivers I could find was HTC RNDIS (for XPx64)
Situation:
I'm living in hostel for one month, and there is only WIFI internet here, so I tried to get my phone WIFI to tether into USB
What have I done:
Connected to WIFI over phone.
Turned USB tethering ON.
By default WIFI is not tethered to USB, so I found that turning USB tethering ON creates usb1 network and WIFI is eth0. Then I configured NAT by iptables on my phone to accept and forward connection from PC (usb1) to WIFI (eth0). [usb0 on Atrix is for Motorola Portal, didn't try yet to connect to internet throught portal connection, not USB tethering]
The problem in short:
At the begining everything works fine. But when many connection threads are opened (didn't look for that many count) connection stops. As it was already mensioned, PC thinks it is connected, on phone USB tethering is still ON, even more - ifconfig still shows the connection. The only diffrenece is that "ping 192.168.42.129 -t" on PC (192.168.42.129 is usb1 IP on phone) starts showing "Request timed out" messages. On the other side - from my phone, I cannot ping my PC either. So connection is like broken, no traffic can be passed, but both sides sees they are ON.
After turning off USB tethering, PC sees connection is off immediately and the Local Area Connection #23 is gone. After turning on USB tethering everything comes back to the beginning.
Current workaround (for me):
I am using VPS service, so I open dynamic SSH tunnel over putty, and use it as my SOCKS5 proxy. The worst thing is that not all programs can use proxies, and when I use such program it tries to crash my connection.
Sorry for my english, it is foreign language for me, if anything is not understandable or you need more test from me, please ask, I will try to do my best.
Power Tether Off
DarkDvr said:
So judging by the quick search, many people have this problem on many different phones, and no solution was found.
I know I've had this problem with my old SGS 1, and even Nexus One.
Same problem on my SGS II, tethering to many different desktops and laptops.
So it seems to be android-specific, or Windows specific problem, really.
Basically, when you tether with USB, first several minutes all is well and speed is good, but in about 5-10 minutes, traffic from the phone just stops.
Phone still shows tethering ON, PC still thinks it's connected, but nothing loads, it doesn't disconnect, it just drops to speed or 0 kbps.
The only way to restore it is to disable tether and reconnect.
Anybody has any idea why would this occur and how to prevent it?
Click to expand...
Click to collapse
Hi,
I had the same problem with my Android Phone - P999 running Cyanogenmod 7.2
I had to go into usb debugging screen to adjust the Display power Settings to - Always ON when Charging - Option.
There is probably some power setting in your device that allows you to do that as well.
Basically Power Saving (Screen Off) Powers OFF the Tether.
Ensuring the Screen is ON while Charging (it charges while plugged into a usb port) ensures the Tether stays ON ALL the TIME!
Hope this helps you.
Took me quite awhile of messing around to find the right option.
I do have a similar problem but it's not time-dependant.
Phone:
Nexus 4 mako
AOKP JB-MR1 Build 6
franco kernel 3.4.0 build #121
Situation:
I use FolderSync to backup my sdcard to my Windows 7 FTP server. The reason for doing this over USB Tether is that I get speeds at around 14MB/s instead of 1,2MB/s over WiFi.
I noticed that it doesn't really matter how long tether is connected and nothing really happens as long as FolderSync is scanning the folders on the ftp server at low bandwidth. However once a larger file is transferred the connection is almost sure to break and show the symptoms described by the other posters (interface still up, just no packets being received at either end).
So I assume that some driver (either on Android or Windows) chokes on certain packets and then just dies. Anyone got an Idea how to tell which device causes the problem to investigate further?
I also noticed that if I had ADB enabled before starting USB Tether that the tether connection on the android will be disabled once the failure occurs.
I have problem with my realme c2 when i connect it to pc via usb tethering, it connects it running ok. if i make screen on by playing youtube or any video on it run but as soon as screen sleep it disconnect after some time
I'm a bit late to this, but for anyone else still having this problem:
in Developer options of my phone(Redmi note 11) under Networking, there is an option called "Always keep mobile data on". Turning this on should fix the issue
@Denav
This doesn't work for me. I have a Moto G Power 2021 and that option is already checked.
flyingpreacher said:
@Denav
This doesn't work for me. I have a Moto G Power 2021 and that option is already checked.
Click to expand...
Click to collapse
Were you able to figure out the issue? I'm having trouble as well. Mine disconnects after a certain time period and the times seems to be random. I've played around with the dev options and other cables and still having same issue. It seems to happen with mac and windows laptops.
I am running Nilsp business ics 3.x, s-on as of now, I have been using the Wifi tether app that Nilsp added to the rom with the profile set to Galaxy Nexus (CDMA/LTE) and the routing fix checked, and it works for the most part. What happens is my laptop will be connected to the wifi from the phone but it can't access the internet because it says "limited access" with a little exclamation sign next to it. It is not that the phone is not connected to the internet though because my buddy's iPad will be connected to the internet at the same time and it will be working fine for him. Could be a problem with the phone, could be a problem with my computer, I don't know. My computer will connect to other wifi signals just fine. Very confused on this matter. Anyone got any answers?
Jacrushar said:
I am running Nilsp business ics 3.x, s-on as of now, I have been using the Wifi tether app that Nilsp added to the rom with the profile set to Galaxy Nexus (CDMA/LTE) and the routing fix checked, and it works for the most part. What happens is my laptop will be connected to the wifi from the phone but it can't access the internet because it says "limited access" with a little exclamation sign next to it. It is not that the phone is not connected to the internet though because my buddy's iPad will be connected to the internet at the same time and it will be working fine for him. Could be a problem with the phone, could be a problem with my computer, I don't know. My computer will connect to other wifi signals just fine. Very confused on this matter. Anyone got any answers?
Click to expand...
Click to collapse
probably the laptop:
make sure you don't have any static-ip settings on your wifi adapter. Let the phone get an IP dynamically. Also don't set any specific dns entries either. I had difficulty from both angles if I didn't just let the wifi-tether app dictate the network settings to the laptop.
Also, do you have any custom firewalls on your laptop? The phone defaults to the 192.168.2.0/ network, so it's not the same as your home router, which is probably 192.168.1.0/
My laptop does that as well but the limited access for about a minute or so but then works fine. Im not sure what causes it
Boot to safe mode with networking (f8 on boot up) and see if it connects.
If it works in safemode with networking then you have a firewall issue.
I can assist further if it is the case
Ok so yeah I am haiving the same problem as hardfallen87. I'm sorry but I don't think I completely understand everything you guys have said to try and help. I sort of understand the IP address stuff but I can't find any settings like that anywhere on the computer. And no I do not have any custom firewall installed.
Still haven't really fixed this problem. I'm still constantly getting limited access on my PC from my phone's WiFi tethering app. I am now running Nils Business ICS Sense 4 version 2.6 and am S-off but it seems no matter what ROM I use it doesn't make a difference. Any help is appreciated...
Dalamar1320 said:
Boot to safe mode with networking (f8 on boot up) and see if it connects.
If it works in safemode with networking then you have a firewall issue.
I can assist further if it is the case
Click to expand...
Click to collapse
Seems to work in safe mode ok.