Related
I have a Jabra Clipper audio player to play my MP3's & streaming internet radio to my car stereo via 3.5mm jack. I also have my Moto BT headset that I use.
When I get a call the music is interrupted and I can answer the call with the Jabra Clipper and I can hear the call audio through the car speakers. The problem is my microphone on my phone is too far away on my car dock and people can't hear me.
So after answering the call I would have to go to settings, wireless, bluetooth and disconnect the Jabra and connect my Moto headset before I can take the call.
This is a pain and takes too long, is there a widget to swap paired BT devices? I cannot find anything in the marketplace.
Maybe a Tasker profile? I have Tasker but I haven't gotten any profiles to work yet.
I have a Droid X running Liberty 1.5.
Thanks.
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
PetRiLJoe said:
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
Click to expand...
Click to collapse
Thanks for your reply, what is CM7?
scramer said:
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Click to expand...
Click to collapse
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
ryant35 said:
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
Click to expand...
Click to collapse
Here is the link: http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Prior to the upgrade last week, the widget would only turn bluetooth on or off. With the update last week it added the option to have it open up the bluetooth (or wifi) options. This isn't automatic, you have to choose for it to do this in the options.
I don't know maybe the phone won't automatically connect with two items at once. It's a hassle to connect each time, but after the initial connection everything runs smoothly.
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
You saved me From buying a new stereo!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Thanks a ton! This $1.50 app saved me from having to purchase a new stereo!
Just to let you know, this solved the exact problem I was having, over five years later! Thanks!
ryant35 said:
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
Click to expand...
Click to collapse
Headphone Connect - One Click Audio is a really simple app that let's you connect / disconnect to your desired bluetooth headset.
You find it in the play store if you search for "Headphone connect - one click audio"
I realize this is an old post, but I recently released an app called ShortTooth: create customized single-click shortcuts to connect to any paired Bluetooth device.
I use it to disconnect from my home stereo when I get into the car (parked close enough to still be paired), and reconnect to my home stereo when I get back.
You could use it to create two shortcuts:
* Toggle Jabra
* Toggle Moto
Or you can create two rows:
* Connect Jabra | Discconnect Jabra
* Connect Moto | Discconnect Moto
It has a free 14-day trial.
I can't see any option anywhere in my SGS2 to set a BT paired device as "authorized". Every time I enter in my car I've to manually select the BT device and start manually the connection.
I searched in the forum but didn't find answers.
I also tried to look at the filesystem and I found auto_pairing.conf file in which there are a lot of BT manufacturer brands listed in sections like "black list", "white list", .... Is it possible I need to manually modify this file to include my BT manufacturer in the white list section? It sounds really strange!
Is there any other way?
I'd love to know that as well.
I atlculay lvoe my sumnasg glxaay s2 wtih VliaRionlm mroe tahn my xobx
Update
I manually modified auto_pairing.conf file adding my car BT manufacturer without any success (I added it in white list with the name already mentioned in the file, so I think that's not a problem of brand name).
My SGS2 continue to ask me to manually select the device to connect to, even if only one BT device is available (car handsfree).
I have the same problem, which i didn't have with my Nexus One running Cynogenmod ROM. I keep my Bluetooth on all the time or most of the time and i would like (like i had in nexus one) when i turn on my car (with Sony MEX-BT3700U car stereo with Bluetooth) that the phone auto-connects with the stereo in a minute or less (or with my plantronics headset when i turn it on), but no, every time i have to go into bluetooth settings and connect on the paired device and then it's connected.
I heard about few application that could help but it would be nice to have it as native function on the phone. I haven't tried these apps yet but if anyone want's to try they can be downloaded from the market, firs is free, the second is not.
https://market.android.com/details?id=a2dp.Vol&feature=search_result
https://market.android.com/details?id=com.btautoconnect&feature=search_result
If anyone can help it would be greatly appreciated
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
mudferret said:
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
Click to expand...
Click to collapse
Stereo doesn't have any options, same as Plantronics headset (only ON or OFF), that means that with my old nexus one running CM (or Nokia n95 8GB) when the bluetooth is switched ON and i come near stereo or headset they connect automatically in about 30 seconds max, with my SGS 2 that doesn't happen, i tried everything but it wont auto-connect until i initiate the connection from phone manually.
I have to resolve this because it's killing me !
jartukovic said:
Stereo doesn't have any options
Click to expand...
Click to collapse
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Mine auto connects to my JVC car head unit, but doesn't to my Belkin Tunestage. No idea why. As it happens, this suits me but it'd be nice to be able to control it.
And the commute begins. The auto connection is an option on my JVC deck, no such option on the phone.
Sent from my GT-I9100 using XDA App
mudferret said:
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Click to expand...
Click to collapse
The stereo is recognized same as Plantronics and that is as a head set, but it doesn't want to automatically connect to either of them, every time i have to initiate the connection. There is one way to connect it (partially automatically ) but that's not the solution - i have to turn on the bluetooth on my phone before starting my car, then when phone is in searching mode if the car is started (stereo turned on) then it will connect automatically, if the search mode (that is active for a short time after turning the bluetooth) ended before i start the car (for instance if i keep my bluetooth on all the time on my phone) then it wont connect automatically.
Am i any clearer about my problem ?
I hear what you're saying but it appears that auto connection is initiated by my stereo. If I turn auto connect off on my stereo there is no connection until I tell my phone to connect. I don't see anything on the gsii settings to have the phone auto initiate the connection. I have a recent JVC deck fwiw.
Sent from my GT-I9100 using XDA App
I will check one more time is there any bluetooth settings on my car stereo, but i'm 90% sure that it doesn't have, because this is the first phone that doesn't connect automatically.
I have had similar issues with mine, it will pair with my Kenwood DNX520VBT but wont auto connect.
however i now have a workaround
Turn bluetooth on your GS2 first, then turn on you Radio. once my Radio boots up it initiates the connection and auto connect works.
if i turn on the bluetooth on my GS2 after my radio it never works.
ive got a sony bt3700 stereo, it connected perfectly with my samsung wave, i just upgraded to a galaxy s and i have to do it manually every time so its not the stereo.
Same thing happened to me, old nexus one with CM7 is connecting ok but i have to connect SGS2 manually or make sure that my bluetooth is ON on my phone before i start the car.
I may have the answer......
Hi,
I have a sort of work around.
My Pioneer head unit refuses to auto connect to my SGS2 and I have to do it manually (I connect from the radio in 4 clicks but thats not the point). This was driving me nuts as previous handsets I owned connected within 5 seconds of being in the car.
I then discovered ROMS and went for the Criskelo ROM and it put me on Android Version 2.3.6 (Not sure if that made a difference or its actually the ROM).
Now with that sorted I found that I have an extra function in my bluetooth settings. When I make the device visible I can then choose the visible time-out length. If I set this to NEVER then I have no problems connecting to the headunit everytime I get in my car.
The only problem I have with this is that I pop my phone into Airplane Mode each night and because that disables the bluetooth it loses the time-out setting so I have to put the time-out back to never each morning.
With setting the time-out to never I'm not sure what battery drain is like because I'm constantly on my phone and my battery depletes rapidly anyway but it seems like a fix for now.
I hope this makes sense and helps people out until a proper fix becomes available.
Cheers,
DJ Sploits
Hi All,
Sorry for bumping an old-ish thread, but it seemed the most appropriate thread, and better than creating a new one of the same topic!
This is what I believe to be true:
*IF* Bluetooth is enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will auto-connect to the GS2
*IF* Bluetooth is NOT enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will NOT connect to the GS2 (understandably!).
*IF* the phone has previously been paired with the car headunit, and the bluetooth on the GS2 is enabled *AFTER* the car has been started, it does NOT Auto-Connect.
From this, I assume that when the car is powered on, it searches for previously paired handsets in order of most recently connected first. If it finds one, then it WILL connect.
Now:
If I leave Bluetooth enabled on my phone, the battery is significantly depleted my mid-afternoon.
I've started using an app which uses the "rough location" (not GPS) to monitor where the phone is located. If it deemed to have moved in X period of time, then it enables bluetooth.
This is great, and works a charm ... BUT it does mean that bluetooth stack on the GS2 is enabled AFTER the car has been moving for a period of time, and thus does NOT auto-connect.
What I've been searching for is:
"When BT stack is enabled on GS2, can it look for previously paired devices and initiate the connection itself?" (Rather than the car connecting to it?) Is there a script or app to do this?
Hi WTFH,
I think it might be more headunit specific. I always have my bluetooth on but it wont connect automatically to my headunit unless I have it set to constantly discoverable (on the handset).
I also use a power saving program called Green Power Premium which will cut bluetooth/data/wifi after a certain amount of time when the phone is in a sleep state. Its great fro saving power as my phone isnt constantly looking for a wifi signal (I don';t use it to control my bluetooth though as I need it on for my car).
Hey DJ_sploits,
Thanks for that ... Yes, I understand that some headsets do not auto-connect to the GS2 if the phone is NOT visible.
But what does seem to be constant is that the GS2 will not auto-connect to any of the headsets if the bluetooth stack on the GS2 is enabled AFTER the headset has come online and available.
One workaround I'm thinking of is:
Enabling a profile which says "When connected to a power source (I'll have to use the power adaptor) then enable bluetooth". Connecting my phone to the power first before starting the car should enable the BT stack before the headset tries to connect.
In fact I could extend this to say "Only enable bluetooth when using power adaptor, and not connected to wifi".
It's still a pain to do this though, as I tend to just jump into the car and don't want to faff about with connecting this and that.
The only other work around I use is to set the visiblity to constant (depending on what android software version you are on). My headunit always picks the phone up if I have it setup like this. the only thing with that is it will eat the battery even more (which is annoying considering there are other phones out there that constantly have their bluetooth on and you never see the battery getting hammered).
The only flaw I can see in your method is the fact you need a power source to knock on the bluetooth. Great for powersaving but it would then mean you would have to remember to connect it to a car charger everytime you got in the car (not too bad if you have it constantly plugged in to the cigarette lighter) and as you set this can be a bit of a faff.
The only way I can see in sorting this is using a power saving app but having your visibilty constantly on for the bluetooth and then we just hope it doesnt eat the battery too much (not to bad for me as I have a charger at work but could be a pain for others). The only problem with this (apart from the battery issue) is that if you knock the bluetooth off or knock the phone to airplane mode (as I do at nights) then when you knock the bluetooth back on it forgets that you want it to be constantly visible so you have to go through the settings and check the box
Hi everyone,
I am an owner of the GSIII I747M and the ASUS Transformer, both running ICS. I recently had this idea (fantasy?) where I mount the Transformer in my car, hook it up to the car speakers and basically use it as my in-car infotainment system instead of the headunit that's in there. Nothing wrong with my in-car headunit (except the fact that I can't get bluetooth to work with my GSIII), but the tablet will give me tons more features. When I enter the car, I want the tablet to automatically tether to my phone via wi-fi and via bluetooth. Wi-fi is for internet access and it works just fine. The bluetooth is for the hands-free profile, so that when I receive a call, the music/navigation/whatever gets interrupted and I can take the call. I also want to be able to dial from the tablet.
When I connect the two devices via bluetooth, I don't have a hands-free profile; indeed I have no useful profiles at all. My question is simple: is there an app for that? Any suggestions? Has anyone done this? Thanks!
I have three Bluetooth items I use every day. With the G5, I've had to delete each of them, turn Bluetooth off and then on again and pair them again to get a connection after a disconnect.
I use Bluetooth headphones, a Moto 360, and a bluetooth adapter in my car. On my S6E I was able to connect, disconnect, and reconnect with no problems at all, but today has been a seriously frustrating day going between devices.
Anyone else seeing this?
I made a bixby routine as follows: when my phone connects to my car bluetooth (VW Passat), it should do several things. But the problem is that the routine almost never starts working by itself? It only works after I manually turn off bluetooth and turn it back on after im already connected to my car. Anyone else have this problem? With tasker there's no such problem when connecting to my car bluetooth, but i'd like to use bixby routines instead of tasker...
Even though I have another routine which does several things after connecting to my BudsLive, and that one always works by itself without problems.
When you get in the car do you activate "media" on car, or just get in and let the phone connect to car? I have noticed on a lot of devices if you don't "fully" connect to media on car, such as playing streaming music many phones don't see the connection unless Media connected (you can pause music). I'll get phone calls fine, but no messages or Maps audio at all unless Media connected. As I said, same with all my older phones, started I think around Android 9. Think part is car manufacturers don't want to support phone options anymore, they want you to use Android Auto or Car Play and leave the software to Google and Apple.
mt2020 said:
When you get in the car do you activate "media" on car, or just get in and let the phone connect to car? I have noticed on a lot of devices if you don't "fully" connect to media on car, such as playing streaming music many phones don't see the connection unless Media connected (you can pause music). I'll get phone calls fine, but no messages or Maps audio at all unless Media connected. As I said, same with all my older phones, started I think around Android 9. Think part is car manufacturers don't want to support phone options anymore, they want you to use Android Auto or Car Play and leave the software to Google and Apple.
Click to expand...
Click to collapse
The thing is, my car bluetooth doesnt want to activate "media" lol. It only connects for phone calls. When i try to activate media the button always returns back to off. Seems to be a samsung/volkswagen problem since i see alot of posts with the same problem when googling
I had Bixby Routines set up on my S21 to do some things automatically when connected with a car Bluetooth kit. Everything was working fine until the last update of One UI 4.0. After the update, nothing happens when I connect to the Bluetooth kit in the car. I deleted the Bixby routine, reset the app data, deleted the Bluetooth partnership, and reconnected to the car's Bluetooth kit - nothing helped.
When I create Bixby routines using regular Bluetooth headphones, everything works fine. The problem only occurs with the car's Bluetooth kit. While searching the Internet, I found out that there was a similar problem with Bixby procedures before. Back then, Bixby routines would not work if the bluetooth device did not have an audio profile. My BT car kit does not have such a profile, only a hands-free profile is available. Has the old malfunction returned?