WSG
WabiSabiGeeks
Latest ROM: WSG Beta v0.0.7
Last Update: May 8, 2012
Type: ICS
Wabi-Sabi: Finding the beauty in, and embracing the imperfect!
Perfect is repeatable. Imperfect is Perfect
PLEASE NOTE: I am not responsible for anything that happens to your device. This includes acts of God, your wife/girlfriend breaking it over your head for using it too much, or jealous iPhone owners!
..::INCLUDED MAIN FEATURES::..
Based on ASUS release US 9.4.2.21
Deodexed
Unsecure Boot.img
Mounted all partitions as Read/Write
Rooted
Custom initramfs (init.d supported)
Normal mode running at 1.4Ghz, High performance running at 1.6Ghz
Ext 4 tweaks
Optimaize apk files (PNG Opt, Resources and APK Comperssion, Zipalign)
System tweak for optimal performance
Network speeds(ipv4) tweaked
Beats Audio & Xloud
KickAssKernelizer
V6 SuperCharger
..:: Donations::..
THANK YOU FOR THE FOLLOWING DONATION:
trseighty
jaycustom
lollee76
gmanhad
Scuddster
benefit14snake
cbasse
..::A Special Thanks::..
Jermaine151
Diamondback
di11igaf
AndroidRoot.mobi
Motley
..::Installation::..
Pulled from Jermaine151 stock rom page (Thanks)
Make sure your Prime is unlocked and you have CWM installed (see this thread for help and a handy tool to do that)
Shut down the prime
[*]Hold both the Power-button and the Volume-down button until the splash screen appears and some white text in the left top corner is visible
[*]Release both buttons and press the Volume-up button
[*]The device now boots into your CWM recovery
[*]Make a backup of your current ROM
[*]Inside CWM select "wipe data/factory reset" (Optional but highly recommended)
[*]Then flash the rom zip as usual
..::ROM::..
DOWNLOAD LINK: PULLED DUE TO PROBLEMS
DOWNLOAD MIRROR:
..::OLD ROM Link::..
WSG_Beta_v0.0.6
..::ChangeLog::..
Code:
WSG Beta - 0.0.7
[LIST]
[*]Fix - Beats Audio for Bluetooth
[*]Attempt a possible fix for flashing ROM
[*]Update - Motley v2.6.11 1.6GHz
[*]More tweaking for performance
[/LIST]
WSG Beta - 0.0.6
[LIST]
[*]Based on ASUS release US 9.4.2.21
[*]Added Android 4.0.4 System Servies and App Processing
[*]Added Cron Support (Cron scripts will run daily, weekly, and monthly)
[*]New Aroma UI Setup
[*]Full (GPU) rendering is turned off by default
[*]Fixed init.d scripts
[*]More app clean-up
[*]Using Motley Beta v2.4
[*]Update - Beats Audio & Xloud
[*]Update - V6 SuperCharger
[/LIST]
WSG Beta - 0.0.3-Patch
[LIST]
[*]Fix Accounts & Sync FC
[/LIST]
WSG Beta - 0.0.3
[LIST]
[*]Remove software(CPU) rendering and use full(GPU) rendering
[*]Adjusted UI frame rate
[*]Removed more ASUS Apps
[*]Using Motley Beta v2.0 (Thanks _motley)
[*]Added Back V6 SuperCharger (Thanks zeppelinrox)
[*]New su binary (Thanks Wraithdu)
[*]Added KickAssKernelizer (Thanks zeppelinrox)
[/LIST]
WSG Beta v0.0.2
[LIST]
[*]Fix Memory leaks
[*]Mount all partitions as Read-Only
[*]Compression level set 9 on all apps/framework
[*]Removed V6 SuperCharger until fully tested
[*]Tweak even more setting
[*]Darky's Zipalign script that actually works
[*]NEW zipalign binary
[*]NEW sqlite3 binary
[*]Wraithdu BusyBox v1.19.4 (Thanks Wraithdu)
[*]Added MasterZen's GPS Fix
[*]Beats Audio & Xloud (Thanks RockoDev)
[*]Added CM9 DSP Manager
[*]VolumePlus v1.9-RB3 (Thanks Meltus)
[/LIST]
WSG Beta v0.0.1
[LIST]
[*]Based on ASUS release US 9.4.2.15
[*]Deodexed
[*]Unsecure Boot.img
[*]Mounted all partitions as Read/Write
[*]Rooted
[*]Custom initramfs (init.d supported)
[*]Normal mode running at 1.4Ghz, High performance running at 1.6Ghz
[*]Ext 4 tweaks
[*]Optimaize apk files (PNG Opt, Resources and APK Comperssion, Zipalign)
[*]System tweak for optimal performance
[*]Network speeds(ipv4) tweaked
[*]V6 SuperCharger
[/LIST]
Reserved for me!!
Cool, I'll download and install tomorrow.
Has anyone tried this
i think i will try it out
Sent from my Transformer Prime TF201 using xda premium
Just a thought maybe leave /system as r/o instead of having it permanently writable. With ro-secure as 0, adb remount works to easily mount r/w. Not trying to criticize in anyway, just a suggestion.
Thanks but download link is temporarily unavailable....will try again later!
might flash this when I get home from college tonight.
what is v6 supercharger?
Bring on the the roms baby! Will try this tonight.
-Transformer Prime-
ickkii said:
might flash this when I get home from college tonight.
what is v6 supercharger?
Click to expand...
Click to collapse
V6 SuperCHarger is a Android memory manager controlled via minfree
http://forum.xda-developers.com/showthread.php?t=991276
MasterZen88 said:
V6 SuperCHarger is a Android memory manager controlled via minfree
http://forum.xda-developers.com/showthread.php?t=991276
Click to expand...
Click to collapse
interesting - that is a very hard thread to read/understand/follow though
I'll be interested in what people find with this .....
Has anyone been able to download and try this? Link appears to be broken...
Sent from my Transformer Prime TF201 using xda premium
Well I downloaded last night it word for me backing up now then going to install
Sent from my DROID X2 using xda premium
So is supercharged built in or do I need to download and run the supercharged script
Sent from my DROID X2 using xda premium
cbasse said:
Has anyone been able to download and try this? Link appears to be broken...
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Link Fixed!
pats4life100 said:
So is supercharged built in or do I need to download and run the supercharged script
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Yes SuperCharger is built in via an init.d script(99SuperCharger)
MasterZen88 said:
Yes SuperCharger is built in via an init.d script(99SuperCharger)
Click to expand...
Click to collapse
So I don't need to do nothing or do I need to activated it and thanks for the rom its smooth and very fast
Sent from my DROID X2 using xda premium
pats4life100 said:
So I don't need to do nothing or do I need to activated it and thanks for the rom its smooth and very fast
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
That is correct. Everything is configured.
Thanks happy its working for you, expect bigger things very soon.
Sent from my Transformer Prime TF201 using xda premium
pats4life100 said:
So I don't need to do nothing or do I need to activated it and thanks for the rom its smooth and very fast
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Yes, SuperCharger is fully configured.
Thanks for the comments, expect big things soon.
Sent from my Transformer Prime TF201 using xda premium
Amazeballs, i assume the kernal is stock modified?
Sent from my Transformer Prime TF201 using xda premium
Related
Hello everyone, welcome to viperROM! This is my first ROM and I hope you guys like it! I built it to be stable with great battery life without compromising speed - this ROM is really fast! I love listening to users input and I will always do what I can to incorporate everyone's ideas into my ROM. Please feel free to comment!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I always recommend that you wipe with any new version! You don't necessarily have to, but I always do!
Update 2.6 - Redline v2.5 RC2
#Added
------------------
Leedroid Tweaks
viperROM Updater App
viperROM Wallpapers (in /sdcard/viperROM) [thanks SHIFT for the awesome new default wallpaper!!]
viperROM Weather Lockscreen Mod [thanks il Duce!!]
New reboot binary (for updater)
#Fixed
------------------
ROM info showing "v2.2" --> Now shows "v2.5 RC2"
Wrong ring on lockscreen --> Now shows correct viperROM Ring on app pulldown [thanks il Duce!!]
#Enhancements
------------------
Removed all sounds from Camera
Updated all apps
#Download
------------------
Redline v2.5 RC2 Download or Mirror - md5: 0dc48c17a3e6f283f146f77e94b9240e
Update 1.25 - Redline v2.5 RC1
#System Info
------------------
Updated to latest base (2.17.651.5) with stock kernel
All apps mx0 compression (RAM optimized), pngopt, and zipaligned
MANY tweaks to memory, system, kernel, and build.prop
virtuous_oc daemon for great battery life and performance
viperControl for lots of customization
Zipalign on boot
48mb dalvik heap
Noop as default governor
/data apps: AOSP Car Home, Twitter, DSPManager, Facebook, Google+, Google Voice, ICS Keyboard, Terminal Emulator, Root Browser, Metamorph, Titanium Backup, WiFi Tether, Voicemail.
#Mods
------------------
7-in-1 reboot mod
Hotspot unlocked
Extended Quick Settings
7 tab Browser
Panorama and HDR added to Camera
Google Talk with video
SMS backup and restore option and 5MB MMS in stock Messaging app
ads blocked (removeable via viperControl)
sysro and sysrw support
Remove OTA check-in
Dimmed Capacitive LEDs (adjust via viperControl)
Added HTC Flashlight
#Cosmetic
------------------
Custom viperROM boot animation
viperROM wallpaper as default
Battery percentages in status bar
Roboto Font
White overscroll glow
No GPS icon when GPS is turned off
1x in status bar
No recent apps in status bar
#Download
------------------
Redline v2.5 RC1 Download or Mirror - md5: d03b2d9f06ec9edc3fa8e12a13babc01
Remove Sense .zip Download
Problems when flashing? Try wiping everything, rebooting recovery, and flashing the .zip again. It seems to work!
Old Changelogs
Code:
[B][U][COLOR="Red"][SIZE="4"]Update 12.12 - Redline v2.1.1[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Everything from v2 (still stock kernel)
[*]EXT4 /system and /cache (not /data so that you might not have to wipe/ data)
[*]Tons of tweaks to system, kernel, network, OOM settings, and build.prop.
[*]Updated viperControl to work with Chad's kernels (v2.1.1 fixed looping when using viperMOD on Tiamat kernel)
[*]Tweaked conservative governor (only if set for screen off) for even better battery life!
[*]Ultra Smooth Sense
[*]viperROM Tweaks in Settings
[*]Fixed Market complaining about "insufficient space" (reboot is all you need to fix it)
[*]Updated apps
[*]Removed more CIQ from ramdisk
[*]SystemUI changes
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 11/28 - Redline v2[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Everything from v1 (still stock kernel)
[*]Fixed custom lock ring (thanks triscuit1983!)
[*]Added ICS Keyboard
[*]No bubble lock screen
[*]Tweaks to entire system (init.d, sysctl, build.prop, and more!)
[*]Added custom undervolt [B]ONLY IF YOU FLASH A CUSTOM KERNEL[/B] (bumped voltages from 128-432 to 850mv [should solve wake on call issues])
[*]Added Google Talk w/ video, modded Camera.apk by Rever3nD, Market 3.3.11
[*]Updated Google Voice, Titanium Backup, Metamorph, Superuser, and Titanium Backup to latest
[*]Removed CIQ related files and libs
[*]Modified Settings.apk with screen calibration
[*]Fixed HTC Hub FC (added MyHTC.apk back)
[*]Status bar mods: 1x, No GPS in bar when off, and no recent apps
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 11/13 - Redline v1[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Latest Base (2.08.651.3) w/ stock kernel
[*]virtuous_oc daemon for great battery life and performance
[*]viperControl for lots of customization
[*]Tweaked memory settings and build.prop
[*]7-in-1 reboot mod
[*]CRT Animation
[*]Hotspot unlock
[*]Extended Quick Settings
[*]Added 7 tab browser
[*]Updated to latest Titanium
[*]Updated to latest Google+
[*]Updated to latest Market
[*]Updated to latest Terminal Emulator
[*]All apps mx0 compression (RAM optimized), pngopt, and zipaligned
[*]/data apps: AOSP Car Home, HTC Twitter, DSPManager, Facebook, Google+, Google Voice, Terminal Emulator, Root Browser, Metamorph, Titanium Backup, WiFi Tether
[*]Custom viperROM boot animation
[*]Battery percentages in status bar
[*]ads blocked (removeable via viperControl)
[*]Nano editor
[*]sysro and sysrw support
[*]5MB MMS
[*]Roboto Font
[*]Zipalign on boot
[*]48mb dalvik heap
[*]Remove OTA check-in
[*]Dimmed Capacitive LEDs (adjust via viperControl)
[*]Set noop as default governor
[*]No bubbles lockscreen with custom text (adjust via viperControl)
[*]White overscroll glow
[*]Added HTC Flashlight
[*]Facebook, GMail, Maps, Superuser, and Metamorph updates
[*]Latest SU binary
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 10/15 - RC2 Test4[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Updated to Tiamat Sense 1.1.0
[*]Changed default governor to noop
[*]Backlights dimmed to 10 (2 min, 20 max)
[*]All apps optimized and pngopt (less RAM usage)
[*]Updated viperControl to v1.99 - viperMOD is now included in vC, fixed bug in viperMOD to change perms on restore from /sdcard, fixed perms on LED init.d file, fixed error in bloat script causing removed apps to not restore, and groundwork laid for "Tweaks Editor", other bug fixes
[*]Metamorph included in ROM for easy theme changes with overscroll glows in /sdcard/viperROM/metamorph
[*]Fixed intermittent Browser FC when searching via capacitive search button
[*]New viperROM lock ring
[*]More mods to HTCMusic.apk
[*]Sprint HotSpot unlocked
[*]SIP/VOIP over 3G/4G
[*]Camera mods - Panorama, HDR, shutter sound disabled, Scenes, and Long press to capture
[*]Added sysrw and sysro to /system/bin for easy remounting in the shell
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 10/3 - RC2 Test3[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Updated viperControl to v1.4 - init.d for capacitive buttons, some code enhancements
[*]Updated viperMOD for EVO 3D to v2 - backup and restore settings, and some code cleanup
[*]build.prop updates to change some info in Settings > About Phone > Hardware Information
[*]Idlescreen_base bubble/text mod
[*]5MB MMS (for real this time)
[*]CRT Animation on/off
[*]White overscroll
[*]7 Tabs in Browser
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 10/2 - RC2 Test2[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Many updates to viperControl, (now on vC v1.3) including init.d file creation for schedulers on both cores, change capacitive LED levels, and a new build.prop editor! I will extend this to editing the viperROM init.d file before final as well.
[*]Removed some bloat (20+ apps located in /sdcard/viperROM/removed_apps)
[*]Bumped MAX Sleep to 432mhz to fix wakeup lag for some people
[*]BFQ default scheduler for both cores
[*]75mv undervolt (bumped from 100mv for stability)
[*]New .zip to flash the 100mv UV that was default in test1
[*]4-in-1 reboot
[*]Better Segoe font (feedback please!)
[*]Unlimited Tabs in Browser
[*]5MB MMS
[*]Red overscroll (still need to change the ugly green color when you press something)
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 9/29 - RC2 Test1[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Based off of latest 2.3.4 update!
[*]Brand new "Tiamat Sense" kernel, Tiamat 1.0.3 built for Sense (MAJOR thanks to Cayniarb!!) Source [URL="http://code.tiamat-dev.com/8x60/htc-kernel-msm8x60/commits/sense-2.6.35"]here[/URL]!
[*]Custom undervolt file (-100mv 192mhz-1188mhz, stock Tiamat 1.0.3 1242mhz -1674mhz, and 1350mv 1728mhz-1836mhz for stability)
[*][B]Custom viperMOD script exclusively for viperROM![/B] - (just type su and then vipermod in Terminal Emulator)
[*]More aggressively tuned virtuous_oc for better battery life (192/384)
[*]viperControl v1.2 - mostly backend enhancements, but adds scheduler selection (more to come)
[*]Aggressively tuned memory settings
[*]Tuned EXT4 file system
[*]Faster sdcard read/write
[*]Goodbye CarrierIQ and other spyware!
[*]40+ tweaks in 21viperrom init.d file!
[*]Tweaks to build.prop
[*]GPS tweaks for faster GPS lock
[*]Implementation of sysctl for more tweaks
[*]New boot and down animations!
[*]Animated battery mod in statusbar with percentages
[*]SystemUI modded to hide GPS icon when off and show 1X/3G
[*]Modded HTCMusic.apk for Dolby audio and Amazon MP3
[*]Modded HTCCamera.apk with Panaoramic, HDR, ISO1250, Scenes, Increase Camera and Video Quality
[*]Native screenshot (hold Power and press Home button)
[*]/system apps: Latest GMail, Latest Superuser and su binary, Latest Youtube, Latest Market, HTC Flashlight, and Latest Maps.
[*]/data apps: AOSP CarHome, Astro, Titanium Backup, WiFi Tether, Facebook, Twitter, DSPManager, Google+, Google Videos, Google Voice, Terminal Emulator, and Rotating Netflix.
[*]Reset zip for virtuous_oc is now included when you flash the ROM (in case you set to performance and then crank the OC too high)
[*]Custom tuned 75mv undervolt zip is now included when you flash the ROM (removes the 100mv undervolt in case the 100mv causes you instability/bootloops, but it shouldn't)
[*]Chainfire3D drivers and plug-ins (plug-ins located on /sdcard - still need to install app from the Market - Info [URL="http://forum.xda-developers.com/showthread.php?t=1087427"]HERE[/URL])
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 8/6 - RC1.3[/SIZE][/COLOR][/U][/B]
[LIST]
[*]FINALLY fixed 5MB MMS (sorry about that!)
[*]More Quick Settings
[*]Segoe font
[*]Added viperControl script - [B]Please read 2nd post![/B]
[*]Panoramic camera
[*]EPST from EVO 4G
[*]Wifi scan interval set to 90 seconds
[*]CRT on/off animation
[*]Green overscroll glow
[*]GPU Acceleration
[*]64MB dalvik heap
[*]Unlimited tabs in browser
[*]Added rotating Netflix
[*]Updated init.d script (no longer need the .zip in 3rd post)
[*]Custom tweaked build.prop
[*]Chainfire3D drivers and plug-ins (plug-ins located on /sdcard - still need to install app from the Market [didn't ask for permission to include in RC1.3 in time] info [URL="http://forum.xda-developers.com/showthread.php?t=1087427"]HERE[/URL])
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 8/4 - RC1.2.1[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Removed Equalizer and added in DSP Manager in it's place
[*]I forgot to edit the build.prop (once again...) and it will still show RC1.2. Don't worry about it.
[/list]
[B][U][COLOR="Red"][SIZE="4"]Update 8/1 - RC1.2[/SIZE][/COLOR][/U][/B]
[LIST]
[*]5mb MMS limit
[*]Ads blocked
[*]Unlocked hotspot
[*]4-in-1 reboot
[*]init script for zipalign and overclock (daemon won't run if SetCPU and similar apps are installed)
[*]Updated CPU script to support custom kernel frequencies
[*]Custom bootanimation and turn off animation - Thanks to mental26!
[*]Memory tweaks
[*]Over 20mb of bloat removed (put apps in /sdcard/viperROM_removed)
[*]----- Removed: Adobe Reader, Amazon MP3, Blockbuster, HTC Reader, Green Hornet, FM Radio, JETCET Print, Sprint Radio, Sprint TV, Sprint Nav, 3D Games, Polaris Office, Protips, Qik, Sound Recorder, Spiderman, Sprint Mobile Wallet, HTC Transfer
[*]Latest HTC App updates
[*]Add latest Facebook app
[*]Add latest Twitter app
[*]Add latest drocap2 app
[*]Add latest Flashlight App
[*]Add latest Equalizer App
[*]Add latest gTalk with video App
[*]Add latest Maps
[*]Add latest GMail
[*][B]If you downloaded viperROM RC1.2 before 1:30PM EST 8/1, the build.prop is wrong and still shows RC1.1. If you want to change it, just change it through Root Explorer or extract [URL="http://bit.ly/ruPpbv"]this file[/URL], delete the old /system/build.prop, copy in the new one, and reboot. If you downloaded it after 1:30PM EST 8/1, it is changed in the ROM.[/B]
[/LIST]
[B][U][COLOR="Red"][SIZE="4"]Update 7/30 - RC1.1[/SIZE][/COLOR][/U][/B]
[LIST]
[*]Added Wireless Tether - [B]Please read 2nd post![/B]
[*]Added Titanium Backup
[*]Added Terminal Emulator
[*]Added Market 3.0.27
[*]Included OC Daemon from Team Unity ROM - [B]Please read 2nd post![/B]
[*]Wrote a custom script for OC Daemon - [B]Please read 2nd post![/B]
[*]Optimized weather animations to save space
[*]updater-script enhancements
[/list]
[B][U][COLOR="Red"][SIZE="4"]Update 7/29 - RC1[/SIZE][/COLOR][/U][/B]
[list]
[*]Initial release
[*]Rooted with Busybox
[*]Zipaligned
[*]pngopt
[*]Deodexed
[*]init.d support
[/list]
Old Downloads
Download Redline v2.1.1: Download
Download Redline v2: Download
Download Redline v1: Download
Download RC2 Test4: Download
Download RC2 Test3: Download
Download RC2 Test2: Download
Download RC2 Test1: Download
Download RC1.3: Download
Download RC1.2.1: Download
Click to expand...
Click to collapse
It has been asked to make it easier to donate for people using Tapatalk, so here are the links...
Donate to -viperboy-
http://bit.ly/n7sB9g
Donate to Vinchenzop
http://bit.ly/n47Q1c
Big thanks to the following people:
- Vinchenzop for being my dev buddy and helping me with the ROM!
- Cayniarb for his awesome Tiamat kernel, hosting, and website!
- JoelZ9614 for his help and guidance!
- bigrushdog and solarnz for their continued help!
- rmk40 for the OC daemon
- knowledge561 for the viperROM splash screen
- Others I will add later because I'm too tired to think!
FAQ
Q: What makes this ROM different than all the other ROMs?
A: First and foremost, you will get the best support from the viperROM Team (-viperboy- and Vinchenzop). We personally reply to almost every post and we're always in the thread trying to help out. If you have to wait more than an hour or so for your question to be answered, that is unusual! What else is different??
The inclusion of the OC Daemon for unprecedented battery life and performance
The custom viperControl script that handles the OC daemon, bloat, and removed app management (more to come too!)
A highly tuned system for incredible smoothness
Click to expand...
Click to collapse
Q: Do I really need to wipe coming from another version of viperROM?
A: I always recommend that and that is how I test my ROMs. You may be not have any issues if you don't wipe, but you might.
Click to expand...
Click to collapse
Q: Where are all the cool add-ons?
A: Check post 4 for more information on how to set up and use the viperROM Updater.
Click to expand...
Click to collapse
Q: What is battery calibration and should I do it?
A: Yes!! If you aren't getting wonderful battery life or you think you can do better, do it! Here is the method I have used even back to my EVO 4G and it has always done well by me: Wipe battery stats (from recovery, or Battery Monitor Widget can do it [Menu > Statistics] and it doesn't matter what percentage you're at when you do so. Let the phone die and then fully charge. Take it off the charger and don't plug it in until it dies again, then fully charge. Your next charge cycle will be much better!
What some people don't understand is that you're not calibrating the battery as you are calibrating the phone. When you wipe and do this procedure, the phone reads where the max and min voltages are so it can report battery stats accurately.
Click to expand...
Click to collapse
Q: What is the deal with tethering?
A: I would recommend using Sprint Hotspot, it has been unlocked on viperROM so it can be used for free! Wifi Tether is still included but it doesn't seem to work very well for most people. This is an issue with the app, not the ROM. If you do want to try and use it, make sure to enable the Routing Fix in the Settings menu of the app. It has also been said that setting the device configuration to "HTC EVO 4G" helps as well.
Click to expand...
Click to collapse
Q: What kernel should I use with this ROM?
A: Until HTC releases the source code for the 2.17.161.5 kernel, the stock kernel (comes with rom) is the only one that will not break anything.
Click to expand...
Click to collapse
Q: Does 3D, 4G, everything work with this ROM?
A: Yes, as long as you don't flash a custom kernel, everything works as it should.
Click to expand...
Click to collapse
Q: I'm getting less than great battery life, what is the deal?
A: Battery life is affected by many things, such as screen-on time, signal strength, etc. Be sure that you do not have any rogue apps by checking for wakelocks with BetterBatteryStats found Here
Click to expand...
Click to collapse
Q: Do any themes work with this ROM?
A: The only mods and themes that we can be sure will be compatible with viperROM are the ones that are found within the viperROM Updater app. If there is a theme that you would like to try, make a nandroid and try it. If it doesn't work, restore your nandroid.
Click to expand...
Click to collapse
Q: Where can updates be found for the ROM?
A: Updates can be found in the thread, or directly through the viperROM Updater app, refer to the 4th post for more information.
Click to expand...
Click to collapse
Q: I have the dreaded 1.5 HBOOT, how do I flash this ROM?
A. Please refer to This Thread for more detailed information.
Click to expand...
Click to collapse
Q. I'm new here, what is root?
A. Many answers can be found in more detail in This Thread
Click to expand...
Click to collapse
Q: My CRT animations don't work...what am I doing wrong?
A: As of the new base from HTC, the line that needs to be added to the build.prop to activate CRT animations causes the phone to not boot. So until an alternative method is found, the CRT animations are not included in any ROM based on the latest OTA update from HTC.
Click to expand...
Click to collapse
Q: I would like to suggest something be fixed/updated/added to the ROM. How do I do that?
A: Please submit it to the viperROM Google Code page so we can track it. Please make sure to mention it in the thread as well so we are aware of it!
Click to expand...
Click to collapse
Q: What are all of the governors, schedulers, and other kernel tweaks I keep reading about?
A: Refer to this thread for any information regarding kernel tweaks.
Click to expand...
Click to collapse
---------------------- Special Features of viperROM ----------------------
viperControl Script
This script is the main script used to control many features within viperROM. Currently with this script, you can:
Adjust the OC Daemon
Change schedulers
Adjust voltage (if on a custom kernel)
Manage removed apps
Freeze any app on the phone
Modify lock screen text
Run "fix permissions" (for FC issues)
Adjust the capacitive button brightness
Edit some features in build.prop
Manage the hosts file
Click to expand...
Click to collapse
To access viperControl:
Open up Terminal Emulator
Type "su" (without the quotes and grant it Superuser access if you haven't already)
Type "vc" (without the quotes)
Click to expand...
Click to collapse
OC Daemon
The OC daemon was created by rmk40 of Team Unity. I take no credit for the daemon, only the script I made to make it easier to work with. More information can be found here, but I will sum it up and explain the script below...
This daemon, written in C, completely eliminates the need for SetCPU and other CPU controlling apps. The daemon handles min/max frequencies for both screen on and screen off but it has one more trick up its sleeve... It can change the governor INSTANTLY depending on the screen state. I have tested it and I can tell you that it really does work instantly and I think this is going to be a great battery saver! I have set default values within the ROM as follows: Screen Off - conservative @ 192min/432max and Screen On - ondemand @ 192min/1188max. Using these settings, I get NO lag. Battery life is amazing, over 19+ hours for me with moderate usage!
If you decide that you want to change the settings of the daemon, here is how you do so...
Open up Terminal Emulator
Type "su" (without the quotes and grant it Superuser access if you haven't already)
Type "vc" (without the quotes)
Enter "1" (without the quotes) and you will see all of your options
Click to expand...
Click to collapse
All the settings can be edited from there. If you want to verify that this is working, you can run these commands from adb shell:
Current CPU frequency
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
Current CPU governor
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
Current min CPU Freq (you will see this change when the screen state changes)
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
Current max CPU Freq (you will see this change when the screen state changes)
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
The script is pretty good for now and I will eventually incorporate it into a large script exclusive to my ROM. However, here are a few things that you need to know about the script...
You MUST flash a custom kernel to overclock! The ROM includeds the stock kernel that is not capable of overclocking. Well why do you call it the "OC Daemon" then?? Because I didn't make it and that's what they called it AND the daemon is capable of controlling OC. Makes sense to me. If you want to overclock (after flashing a custom kernel, of course), run the script and change the MAX awake to whatever OC you would like.
The phone will boot up and detect if you're using SetCPU or other CPU apps. If you are, the daemon will be DISABLED automatically. If you aren't, the daemon will be enabled.
Click to expand...
Click to collapse
Splash Screens(click image to download!)
]To flash these, you must put it on the root of your sdcard and flash through the BOOTLOADER, not recovery! Does NOT work on 1.5 HBOOT!!
User Bar by knowledge561(please save it, don't just link!)
Tweaks
LeeDroid Tweaks For Latest OTA
LeeDroid Tweaks were created by j4n87, and he deserves your thanks for all of his hard work. His thread (for leedroid tweaks CDMA version) can be found HERE. Stop in for update info, or just to give thanks for this awesome mod.
viperROM SuperWipe Utility
metamorph zip to give stock backdrop in pulldown
metamorph zip to give semi-transparent backdrop in pulldown
Using the viperROM Updater App
With the latest release of the ROM, we've included (thanks to tommytomatoe) an app to help keep the rom updated, and give a quick place for our users to find compatible mods and/or themes that we've made. This is the viperROM Updater App. Tommy was kind enough to include instructions, but I'll also add screenshots to help aid, on how to set it up, so you're receiving the latest options for your customization purposes.
First, open the app. This will take you to ROM update/changelog page. Here you can check to see if there is any updates for the ROM, as well as what the most recent changelog is.
Next is the MODS tab. The first time here, it will give you instructions on how to update and manage the update servers. If you followed the instructions correctly, your servers page should show this
Press back (softkeys) and go back to the MODS tab, and press menu, then 'check now'. Your phone should tell you that new updates were found. Press on the dropdown arrow, and you should see all the options available for download.
Updater App FAQs
Q: Where does the updater app download mods to?
A: The app automatically downloads mods/themes/updates to the /sdcard/downloads folder.
Q: After a mod downloads, I get the option to apply it, but it just causes my phone to freeze?
A: The updater app is currently set up to work (full automation) with TWRP 2.0 recovery. If you have ClockworkMod recovery, you can still use the app to download mods, but you'll have to manually reboot into recovery and flash the mod.
Will def be trying this out! Thanks viper
Sent from my PG86100 using XDA App
Nice and so it starts... Glsd to see more roms
E3D
mexiking713 said:
Can't wait!
Send from my Rooted HTC Evo 3D
Click to expand...
Click to collapse
It's plain right now, but people want something to flash. I know how that goes RC1.1 will have:
- New Market
- Optimized Weather (less space)
- Titanium Backup included
Any other suggestions?
-viperboy- said:
It's plain right now, but people want something to flash. I know how that goes RC1.1 will have:
- New Market
- Optimized Weather (less space)
- Titanium Backup included
Any other suggestions?
Click to expand...
Click to collapse
A2SD?!?!?!
-viperboy- said:
It's plain right now, but people want something to flash. I know how that goes RC1.1 will have:
- New Market
- Optimized Weather (less space)
- Titanium Backup included
Any other suggestions?
Click to expand...
Click to collapse
Removed bloatware?
45 mins to upload? You connected to a 56k modem?
F yeah! These are exciting times!
Enhanced volume and overclock
Sent from my PG86100
mcmikecruz1 said:
Enhanced volume and overclock
Sent from my PG86100
Click to expand...
Click to collapse
No overclocking until a custom kernel is built, otherwise the only way is through script but you would have to redo it every time you reboot.
Tilde88 said:
and i of course will be stripping it of alot of crap, and tweaking alot of the sh/.d's ... THANKS
Click to expand...
Click to collapse
I was going to strip it, but some people just want stock. I am going to write a custom script for this ROM so that it can be easily customized.
Vinchenzop said:
Reserved for me
Click to expand...
Click to collapse
Everybody, Vinchenzop will be working with me on maintaining this ROM. I hope you guys are ready for a great ROM!
CheesyNutz said:
Nice and so it starts... Glsd to see more roms
E3D
Click to expand...
Click to collapse
knowledge561 said:
A2SD?!?!?!
Click to expand...
Click to collapse
I can add it in, I don't use it and I worried about adding it in and it not working because of it being a new phone. But it probably will work.
fmedina2 said:
Removed bloatware?
Click to expand...
Click to collapse
I will have a script specifically in the ROM that will do this. Not sure what release this will make it into.
johnsonjs said:
45 mins to upload? You connected to a 56k modem?
Click to expand...
Click to collapse
LOL, it was actually 1.5hrs for a ~380MB ROM. I'm on Verizon DSL and it's not very fast (obviously)
Angry Birds lol.....
mcmikecruz1 said:
Enhanced volume and overclock
Sent from my PG86100
Click to expand...
Click to collapse
Yeah that sounds good to me too...I wonder if we can use the frevo OC still
Anything I can do to help contribute to this Rom? Changelogs or something?
Could you tell if the native wifi tether will work on this ROM?
Nice job viper. I will get the hotspot hack up for it after its uploaded. My port had some issues with some sideload error.
Sent from my 3VO..
wranglerray said:
Angry Birds lol.....
Click to expand...
Click to collapse
I won't add that in because not everyone uses that and it's something that many may remove.
irishgreen said:
Yeah that sounds good to me too...I wonder if we can use the frevo OC still
Click to expand...
Click to collapse
Should be able to. I could write an init.d script to load in your overclock on boot, but I worry that it may freeze the device since it's loading everything up and you really should clock the phone down before doing the overclock. But I'm sure custom kernels are only a day or two away.
knowledge561 said:
Anything I can do to help contribute to this Rom? Changelogs or something?
Click to expand...
Click to collapse
I'm good for now. I will put a changelog up later when I have RC1.1 out.
bartendersimon said:
Could you tell if the native wifi tether will work on this ROM?
Click to expand...
Click to collapse
I will install it and see if it works. If so, I will include that in RC1.1 as well.
HOME BASE
Based off of Gb Photon
Directions:
1. Select a Home Base Full Version ROM (EXT3/EXT4, Blurred/deBlurred).
2. Flash the Full ROM version.
3. Reboot Phone into Android
4. Choose an update file.
5. Reboot back into CWM
4. Flash the update file.
Full Version ROMs - FULL WIPE
EXT3 ROMs
Version #1 Base 1.1: Stock Photon EXT3 -With Blur -No Kernel
http://www.multiupload.com/HWWDO2DFKF
Version #2.Home Base Photon v1.5-EXT3 (WITH BLUR) (1.1ghz shabbys KERNEL)
http://www.multiupload.com/39IFDNL9NG
Version #3 .Home Base MEGA Photon 2.1 -EXT3 Extreme- 1.1ghz DeBLURRED
http://www.multiupload.com/JMH4GFW5CM
EXT4 ROMs
Version #4.Home Base MEGA Photon 2.2e -EXT4 Extreme- 1.1ghz DeBLURRED
Shabbys kernel /ext 4 version(WIFI broken)
http://www.multiupload.com/OJ4IC5B8SZ
Version #5.
Home Base Photon v1.7A-EXT4 (Slight deblur) rc2 kernel (Broken Wifi. new Ext 4 script Also)
http://www.multiupload.com/H8GW4BMORT
Home Base Photon v1.7B-Ext4 (Slight deblur .. New Ext 4 script & Wifi Working Kernel)
LMK IF THIS ONE WORKS Bc this is going to be the build if so
http://www.multiupload.com/KZXDDC954S
(Flash Ext 4 4.3 update only for this version )
Updates - NON-WIPE
Update version 4.2 Home Base Photon-
http://www.multiupload.com/DIFFOT761U
Update version 4.3 (new ext 4 support) Home Base Photon
Just to be safe before reboot after install run fix permissions once
http://www.multiupload.com/407XGYM0FJ
Additional Downloads - ALL CWM FLASHABLE
MARKET FIX
http://www.multiupload.com/RZ14GCZ4TU
BLOATPACK
http://www.multiupload.com/483JI71251
BAD ASS RUN DOWN VIDEO AND HOW TO FLASH!!!!!! (qbking77)
http://www.youtube.com/watch?v=NZjqqo7Vrjs
Whats included, How to Install and the latest Changelog (See Second Post)
F.A.Q.
How to Get Gtalk over 4g working and not just on wifi?
HTML:
Use sqlite and root explorer
Navigate to
Data/data/com.google.android.gsf/databases/gservices.db/main
Scroll down and find gtalk vc wifi
The value is true long press ands say edit record
make it false no caps and reboot
I cant Find Accounts and Sync with my DEblur Rom ?
HTML:
how to get to Accounts and Settings
-To sync accounts (using adw launcher)
-create desktop shortcut
-Select 'custom shortcut'
-Select 'pick your activity'
-Select ' activity'
-Select ' accounts and sync settings'
-And choose the first option.
-This will create a shortcut on desktop where you can choose what to sync .
How Do i go Back to EXT3?
HTML:
REINSTALL ANY EXT3 ROM FROM SCRATCH
-or run an ext 3 converter
-or restore an ext 3 backup
Whats Included
HTML:
-Droid 3 camera
-battery drain fix
-stock theme
-720p
-slow mo and fast mo capture
-updated hosts blocking
-updated apns list
-ext 4 system/data and cache partitions
-webtop over hdmi hack
-build.prop tweaks
-max window events tweaked
-added stagefright
-increased dalvik heap
-decreased dpi
-Graphic tweaks
-proximity sensor tweaked
-timeout decreased
-wifi scan set to 90
-custom com.moto.and.settings
-8 point touch
Changelog
HTML:
v1.7 a and b
both contain a new experimental ext 4 conversion script that requires a wipe
(Thanks diviance)
Added a few new settings tweaks
upped max handler events to 250
A contains ext 4 conversion but has penguins rc2 kernel (wifi is broken)
B Contains ext 4 conversion but has a modded rc1 kernel and wifi is working (hopefully she boots )'
This is the ideal build if so . and will probably slim down the builds once i find out.
For these two versions .. please flash update version 4.3
v4.3 is just a more accurate updater script for the new ext 4 conversion
-also added a bunch of new init.rc hacks
v3.2 this Time it should work..
i havent personally tested it. so i will await . feedback
basically
-redid everything---
- somewhere down the line. the deodexing got borked(fixed now)
-Newest Build Strongly deodexed
-Added alot of cool cm7 stuff
-included shabbys rc 1 kernel since OTA update fixes wifi
kinda need that
V4.2
-Fixed Wrong Script in init.d Confirmed working
-added Div files to update .
-Should update Missing parts from older Builds
to latest ota
(wont lose anything )
Also Updated build.prop
v3.0
-It just got awhole lot more confusing(not really just take a deep breath i had to )
- just added basically the same thing as version 1.5
-except its based off of the latest ota
-need to confirm it works before taking down the old version
-i made a blur and deblur 3.0
-
no ext 4 bc at this moment the only supported kernel breaks wifi
-since the ota fixes it .. again .. pointless
V2.2 E
-INCLUDED shabbys new ext4 support kernel
-threw in a bunch of great cm7 tools
-fixed dpi
-Cm live wallpapers
-Tw walpapers choose as well
-droid 3 camera and video modes enabled
-3d gallery app /and blur gallery
-be aware wifi is broken
-should convert to ext 4 correctly this time
-if not!!!!!!!!!!!
- an ext 4 cwm is needed
-i dont know bc i cant test this .. someone please report back
v2.1 and 1.5 update
-deleted broken system files
-corrected dockservice errors (yayforjuggs)
-included launcherpro
-more stability -bc of the broken system files, that were deleted
v4.0(UPDATE)
-Added Tw Launcher Wallpapers (custom selections and resizings)
-Added Boot Manager
-Included gps Status
- Updated gps conf file
-Updated com.mot.and.settings
-also Added Market fix
-Fixed Broken Buil.prop
-Set Dalvik for faster boot
v2.0
-Removed a Ton of MOTOBLUR
-Removed Blur Setup
-Added Twlauncher Exclusively
-Added Tw Launcher Wallpapers (custom selections and resizings)
-Removed All Socialwidgets and ones pissing me off as well
-Added Shabbys 1.1ghz kernel and ext 4 modules as well
-Added boot manager
-Added CM Parts
-Added CM Wallpapers
-Included Batt Fix (JUGGS)
-MUCH MUCH MORE (BRAIN FRIED FOR NOW SORRY)
-Again if this causes too many problems for you personally
-Flash the Bloatpack
-Or Reflash the Base that includes blur
-I have tested this and can attribute, for someone
who plays games, checks gmail, checks foursquare,
surfs the internet, loves camera and videos,
surf the heck out of xda, download random things from the market,
flash random themes, and dont care about,
Moto blur, or Blur setup, or Exchange,
and are looking for a quicker feeling rom
THIS IS THE BUILD FOR YOU
V1.4
Included shabby Penguins 1.1 Ghz Kernel
-Fixed major market issue
-Fixed Broken build.prop issue
-Reverted vm heap to 48 (quicker boot)
-Included in Ext4 Modules and
-Huge Install Script update
-Fixed BattFix Issues
-Removed ADW
-Touchwiz and Blur Home are default
-Need Setcpu to give kernel permissions to go to 1100
-more to come stay tuned
Downloading as soon as you post.
Thanks for all the hard work on your bastard step cousin!
let me know,, any issues ... ill be up for a few more hours.. thanks as well
PM'd you
10char
gtalk
10chars
Downloading as we speak will report bak
Sent from my MB855 using xda premium
Just so everyone knows, it boots fine, no issues so far.
pretty quick too
what filesystem does the photon use natively ?
just curious.. my Epic was RFS and when we converted it and used EXT4 it was screaming fast.. so I'm curious what moto put in the photon.
Everything is cool only issues so far is now when im in the market it says xda premium add is purchased but when i click to install it wont let me
Sent from my MB855 using XDA App
ext 3
same here my sammy was flying after ext 4 so i applied the same idea here
more tweaks to come
Will post a market fix
Sent from my MB860 using XDA App
Downloading now with my Photon. Will post back later on today after I flash. Going to bed!
-DJ
Can't wait to give this a whirly pops
Sent from my MB855 using xda premium
Downloading now. Thanks in advance!
Sent from my MB855 using xda premium
Man what's going to happen when you go on tour lol
Thanks so much for this!
Will flashing alien theme cause any problems or remove any tweaks?
Sent from my MB855 using XDA App
Awesome.....thanks. Just been sitting around thinking about snagging a good base to theme off of.
Also, does anyone think the Market fix will work for Juggs update.zip? It is so slow and buggy can't even hardly use it.
In.
Sent from my MB855 using xda premium
I was able to put the Alien theme on here. Did ADW Launcher EX come already installed? I had it. And my phone reboots as it's installing an app from the Market. This is after flashing the market zip.
Hi everybody
I'v just tested a great script and Its completly Working With ICS.
Features and Improvements:
-RAM Manager,Less Lags,better Multitasking(LMK and MinFree)
-Automatic Zipalign(Zipalign xbin is included)
-TCP and 3G Tweaks For Better Network
-SD Card Read Speed ahead Set to 3072kb(4096 is Very agressive)
-Better Battery Life through Battery Tweaks and Linux Battery Tweaks too
-Mutch More Smoother Phone!!
-A Lot More!!!
Requirements:
-Android 4.0
-At least 2MB free on /system
-Root Acces
-Kernel that supports init.d
Installation:
1-Download Flashable Zip
2-Reboot to recovery
3-Mount /system
4-Flash via recovery
5-reboot and enjoy!!
6-No need to Fix permisisons the Updater Script Does
In Package:
-System/xbin/Zipalign
-System/etc/init.d/05Lagfixer(Contains,LMK and MinFree)
-System/etc/init.d/s78enable_touchscreen_1(TouchScreen Script)
-09sdcardspeedfix
-S70darky_zipalign
-s94network(network tweaks)
Importants Notes:
-Do not Use any Other Script With This
-No need to Fix permisisons the Updater Script Does
-You can use It With GB ROMS(But not tested on it)
-Please For anyone Who want to Use it in His Own ROM,ask For permissions Before
Credits:
-slaid480
-Pikachu01
-Zeppelinrox
-Juwe11
-ChainFire
-Darkyy
-broodplank1337
-Any XDA Member/Dev That Helped me in this Project
Original topic by slaid480 so don't forget to thanks him too
ramezzidane said:
Hi everybody
I'v just tested a great script and Its completly Working With ICS.
Features and Improvements:
-RAM Manager,Less Lags,better Multitasking(LMK and MinFree)
-Automatic Zipalign(Zipalign xbin is included)
-TCP and 3G Tweaks For Better Network
-SD Card Read Speed ahead Set to 3072kb(4096 is Very agressive)
-Better Battery Life through Battery Tweaks and Linux Battery Tweaks too
-Mutch More Smoother Phone!!
-A Lot More!!!
Requirements:
-Android 4.0
-At least 2MB free on /system
-Root Acces
-Kernel that supports init.d
Installation:
1-Download Flashable Zip
2-Reboot to recovery
3-Mount /system
4-Flash via recovery
5-reboot and enjoy!!
6-No need to Fix permisisons the Updater Script Does
In Package:
-System/xbin/Zipalign
-System/etc/init.d/05Lagfixer(Contains,LMK and MinFree)
-System/etc/init.d/s78enable_touchscreen_1(TouchScreen Script)
-09sdcardspeedfix
-S70darky_zipalign
-s94network(network tweaks)
Importants Notes:
-Do not Use any Other Script With This
-No need to Fix permisisons the Updater Script Does
-You can use It With GB ROMS(But not tested on it)
-Please For anyone Who want to Use it in His Own ROM,ask For permissions Before
Credits:
-slaid480
-Pikachu01
-Zeppelinrox
-Juwe11
-ChainFire
-Darkyy
-broodplank1337
-Any XDA Member/Dev That Helped me in this Project
Original topic by slaid480 so don't forget to thanks him too
Click to expand...
Click to collapse
DOes this fix scrolling lag in ICS! specially up and down scrolling
On Sonydroid v5(GB) doesn't work.
My phone now is laggy and slow
tracer123 said:
On Sonydroid v5(GB) doesn't work.
My phone now is laggy and slow
Click to expand...
Click to collapse
it is for ICS
I9103 said:
it is for ICS
Click to expand...
Click to collapse
Yeah but he says can use with GB but not tested.
tracer123 said:
On Sonydroid v5(GB) doesn't work.
My phone now is laggy and slow
Click to expand...
Click to collapse
Try this script for GB
http://forum.xda-developers.com/showthread.php?t=1561806
is this work on gb??
im not sure if GB rom (stock/custom kernel) have init.d forlder, bcoz this script need init.d folder on /system/etc/ to work, CMIIW
Sent from my SK17i using xda premium
i have tested and it works fine.thanks.:good:
is this work with stock ics kernel on live with walkman ??
Confirm work on stock ICS on xperia mini pro,stock kernel,rooted.
Sent from my SK17i
m3lv1nht said:
Confirm work on stock ICS on xperia mini pro,stock kernel,rooted.
Sent from my SK17i
Click to expand...
Click to collapse
I concur. Please confirm.
gmp009 said:
DOes this fix scrolling lag in ICS! specially up and down scrolling
Click to expand...
Click to collapse
+1 for that
Working, but I think battery drain is bigger :?
EDIT: my bad, everything is good battery 0.6% per hour
Done flashing, I dont if its working. How do I know if its working?
Sent from my WT19i using Tapatalk 2
query
ramezzidane said:
Hi everybody
I'v just tested a great script and Its completly Working With ICS.
Features and Improvements:
-RAM Manager,Less Lags,better Multitasking(LMK and MinFree)
-Automatic Zipalign(Zipalign xbin is included)
-TCP and 3G Tweaks For Better Network
-SD Card Read Speed ahead Set to 3072kb(4096 is Very agressive)
-Better Battery Life through Battery Tweaks and Linux Battery Tweaks too
-Mutch More Smoother Phone!!
-A Lot More!!!
Requirements:
-Android 4.0
-At least 2MB free on /system
-Root Acces
-Kernel that supports init.d
Installation:
1-Download Flashable Zip
2-Reboot to recovery
3-Mount /system
4-Flash via recovery
5-reboot and enjoy!!
6-No need to Fix permisisons the Updater Script Does
In Package:
-System/xbin/Zipalign
-System/etc/init.d/05Lagfixer(Contains,LMK and MinFree)
-System/etc/init.d/s78enable_touchscreen_1(TouchScreen Script)
-09sdcardspeedfix
-S70darky_zipalign
-s94network(network tweaks)
Importants Notes:
-Do not Use any Other Script With This
-No need to Fix permisisons the Updater Script Does
-You can use It With GB ROMS(But not tested on it)
-Please For anyone Who want to Use it in His Own ROM,ask For permissions Before
Credits:
-slaid480
-Pikachu01
-Zeppelinrox
-Juwe11
-ChainFire
-Darkyy
-broodplank1337
-Any XDA Member/Dev That Helped me in this Project
Original topic by slaid480 so don't forget to thanks him too
Click to expand...
Click to collapse
Hi there. I am on stock ics 4.0.4 ROm with stock kernel rooted and locked bootloader. Can I use this script?
zerorated24 said:
Hi there. I am on stock ics 4.0.4 ROm with stock kernel rooted and locked bootloader. Can I use this script?
Click to expand...
Click to collapse
You have to install custom kernel that support init.d
So you need to unlock bootloader
confirm work well on mini pro stock rom :good:
I used Rage kernel with scripts zram, swap2cache, swap2system. Should I remove them scripts too?
Try this:
Prototype Optimization
Some user give good feedback and totally xperia optimize.
Titanicology said:
I concur. Please confirm.
Click to expand...
Click to collapse
i use init.d tweak for stock rom by puppet13th
Sent from my SK17i
Tried it in real ICS in my xmp works like charm.. thanks
Sent from my Xperia Mini Pro using XDA App
Latest update
- Uploaded V0.8 (see changelog below for changes)
FlyKernel
Its purpose:
- Smoothest experience possible
- Stay as close to stock as possible
- Only the most useful governors, io scheds and tweaks will be included
- Let the users have input on features
- But most important of all: Let the Ray Fly.
Features
- Works with al .431 and .587 based roms (miui also). I recommend a .587 based one.
- OC up to 1.6 Ghz and undervolting (Arc S frequency table, with some added freqs)
- Build with linaro 4.7.2 (aug 2012) and board specific flags
- Kernel: 2.6.32.59 (2.6.32.9 is still available in v0.5)
- SmartassV2 and SavagedZen (recommend smartassv2)
- Noop, deadline, SIO and CFQ (recommend noop)
- Ext 3/4 and NTFS support
- Two way call recording
- OTG
- SLQB
- TinyRCU
- Zram (as in stock)
- Init.d support
- Tweaked
- WiFi embedded in kernel
Download
Download:
http://www.mediafire.com/?pxbbksjdbs16s
Install
Flash Tool OR
fastboot –i 0x0fce flash boot flykernel0_8.img
Changelog
Code:
V0.8
- Switched to ARC S freqs (Added 2 extra, 134 and 1,6; so i hope everybody is happy)
- Optimized cpu freqs at boot
- Longer battery (less voltage and less high freq hungry)
V0.7d
- Updated two way call recording
V0.7c
- Added undervolting (use setxperia)
- Fixed cpu freq at boot (now 1 ghz)
V0.7b
- Implemented fuse driver again (accidently removed in 6 and 7)
V0.7
- Disabled around 30 config flags, about debugging and not necessary stuff.
- Reduced img size to just 5mb in stead of 11mb (both kernel and ramdisk are smaller)
- Smaller memory footprint and increased performance
- Added version to kernel version string
- Small update to OTG
V0.6
- Redid bootscreen
- Completely redid cpu frequencies (partly based on doomlord and sirkay)
- Changed some strings in mkcompile_h
V0.5.59
- Went trough the long and tedious process of
patching up to 2.6.32.59 kernel (v0.5 is 2.6.32.9)
V0.5
- Recompiled wifi modules using linaro
- Add tinyrcu for smaller memory footprint
- Fixed SLQB allocator (wasnt enabled properly in previous versions)
- Made size kernel smaller
- Changed some build flags
v0.4B
- Small cpufreq fixes
v0.4
- Switched to latest Linaro (faster) and used other build flags
- Updated OTG support
V0.3
- Vsync enabled for smoother UI
- Better OTG support (needs testing)
- Switched to SLQB allocator
- Ramdisk optimization
- Small tweaks in kernel
V0.2
- Added SavagedZen governor
- Added SIO and CFQ IO schedulers
- Ext 3/4 and NTFS support
- Fixed two way call recording quality?
- WiFi embedded in kernel
- Probably something more..
- Small tweaks
V0.1B
- Resized bootlogo
- Added WiFi modules to kernel (no need to flash modules seperately)
V0.1
- Initial release
- OC up to 1.6 Ghz
- Init.d support
- Smartass V2 Governor
- Lots of small Tweaks
Bugs
Code:
[B]Fix for usb storage to pc (if not working for some reason,
for example on jellysandwich)[/B]
- Connect usb cable
- Disable/stop HDMI in settings->app->all
- Disconnect
- settings -> xperia -> usb con ->Disable companion message
- settings -> xperia -> usb con ->Switch to the usb mode
which is not set (dont remember if it was msc or mtp)
- Connect
- Disconnect
- Switch to MTP mode
- Connect
- Disconnect
- Switch to MSC mode
- Then it worked for me for some reason..
If its not working just switch a couple of times between mtp and msc
and reconnect cable couple of times
In the end it shoulld be working in MSC mode.
[B]Only for V0.1[/B]
- If wifi is not working:
- Backup original modules (rename /system/lib/modules
to /system/lib/modulesbak)
- Flash updatewifi-signed.zip via recovery OR
- Push the contents of the
modules.zip to /system/lib/modules/ (first delete the original files)
Support me
I dont host on moneymaking sites, because they are slow so;
Feel free to help my buy a new HTPC and donate :victory: or at least hit Thanks.
Thanks to
- Doomlord
- Sirkay
- FXP
I think this new kernel is only for stock based rom, anyone try that?
thomas1991_12 said:
About me
I´m a new developer for the Ray. I come from the LG gt540, for which I created TWRP ports (only touch recovery for the device).
I have now created a kernel based on the 4.1.B.0.587 sources by Sony.
It´s called:
FlyKernel
Its purpose:
- Smoothest experience possible
- Stay as close to stock as possible
- Only the most useful governors, io scheds and tweaks will be included
- Let the users have input on features
- But most important of all: Let the Ray Fly.
At the moment its very smooth and gets around 4000 in antutu (smartassv2 1,4ghz).
Let me know what you guys want in the kernel, which governers, which IO schedulers etc. I want to keep it as minimal as possible.
Install
Flash Tool OR
fastboot –i 0x0fce flash boot flykernel0_1.img
Changelog
Code:
V0.1
- Initial release
- OC up to 1.6 Ghz
- Init.d support
- Smartass V2 Governor
- Lots of small Tweaks
Bugs
Code:
V0.1
- If wifi is not working:
- Flash updatewifi-signed.zip via recovery OR
- Push the contents of the
modules.zip to /system/lib/modules/ (first delete the original files)
Support me
I dont host on moneymaking sites, because they are slow so;
Feel free to help my buy a new HTPC and donate :victory: or at least hit Thanks.
Thanks to
- Doomlord
- Sirkay
- FXP
Click to expand...
Click to collapse
I also come from the LG gt540,haha~
I will try it with jj and report back.
Sent from my ST18i using xda app-developers app
Maybe can you implemented UV features in your kernel?
Thanks for the kernel.
Sent from SEMC Xperia™ ray via Tapatalk 2
well done. new developer coming in .. keep up good work
btw better ask them to backup stock modules just incase
thomas1991_12 said:
Bugs
Code:
V0.1
- If wifi is not working:
- Flash updatewifi-signed.zip via recovery OR
- Push the contents of the
modules.zip to /system/lib/modules/ (first [B]rename[/B] the original files to [B]modules2[/B])
Click to expand...
Click to collapse
nice work bro,
sooooo long using sirkay 7.1.431 , my hand itching wanna try others kernel. seems your at the door ...will report back later
Hi thomas welelcome to the ray family can u try cm9 the latest one cuz i found one problem.is related to kernal...when i turn off the lockscreen den after few minutes i wan to use then i press the power button the lockscreen takes few second to show...it kinda annoying so can u try make a kernal for that?i dont have that problem in jj rom
Sent from my ST18i using xda premium
Im focusing on this kernel first. Ive only tested it with stock 587.
Probably gonna release an update today.
cxj1995 said:
Hi thomas welelcome to the ray family can u try cm9 the latest one cuz i found one problem.is related to kernal...when i turn off the lockscreen den after few minutes i wan to use then i press the power button the lockscreen takes few second to show...it kinda annoying so can u try make a kernal for that?i dont have that problem in jj rom
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
r u sure it is kernel related? i dont see any file that can build for lockscreen in kernel sources.
Sent from my ST18i using xda premium
Nice at last we got sirkay's successor But i think i;ll wait for the next version, the wifi problem-less one keep up the good work!
hansip87 said:
Nice at last we got sirkay's successor But i think i;ll wait for the next version, the wifi problem-less one keep up the good work!
Click to expand...
Click to collapse
No problems with Wi-Fi, just use provided modules.
Sent from my ST18i using xda app-developers app
hansip87 said:
Nice at last we got sirkay's successor But i think i;ll wait for the next version, the wifi problem-less one keep up the good work!
Click to expand...
Click to collapse
Ya... I will also go with the next release!!!
Sent from my ST18i
thomas1991_12 said:
No problems with Wi-Fi, just use provided modules.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
Not that I doubt the first version, I just want to have a really clean kernel installation. Just like you intended the mod to be, as close as stock one
Sent from my ST18i using xda app-developers app
you can add wifi modules in kernel. check my git, there's kernel ramdisk that can load modules on boot. just put your modules in right folder.
Sent from my ST18i using xda premium
sirkay said:
you can add wifi modules in kernel. check my git, there's kernel ramdisk that can load modules on boot. just put your modules in right folder.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Yeah, only disadvantage is that the ramdisk will get pretty big.. But I think ill do that in next release. And new govs and io scheds. Btw where can i find incremental kernel patches?
Sent from my ST18i using xda app-developers app
trying on pureness 10
seems working but I had to patch wifi
thanks
Hi!
Is this kernel support the two way call recording?
run this one (and updated wifi module) with jj 3.3 and a lot of minor mod, still fine until now.
Pretty fine kernel. I will donate when I get my payment via paypal
PS: the flykernel text in boot too slim, a bit hard to read to me.
sirkay said:
r u sure it is kernel related? i dont see any file that can build for lockscreen in kernel sources.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Yes i do...u try compare jj and cm9...cm9's lockscreen will take a few second and jj rom dont have that problem
Sent from my ST18i using xda premium
Breaking News:
App Manager Feature will no longer Added Because Of Some issues.
NXEngine Will Release Next Week.. Please Wait
"This Tweak/Mod Will Boost Your X10 Mini/Pro"
This Script is for E10i and U20i only!
Requirements:
-GB/JB ROM
-GB/JB KERNEL
-4MB or Up Free On /system
-A x10 mini/pro phone
Features
-Zipalign(Auto/Manual)
-2 Boost Modes(Normal/Gaming)
-Fix Permissions(Auto/Manual)
-Database/db Optimize(Auto/Manual)
-3G/4G/WIFI Enhancement
-Blocks All Advertisment/Ads
-Entropy(Reduces Lags)
-Clean your phone
-Drop Caches
-Wipes Dalvik cache
-Reboots Your Phone
-SwapItOn By Defiant07
-sysctl Tweaks
-init.d Tweaks
-build.prop Tweaks
-All Tweaks Enabled at boot
Installation:
-Extract the NXEngineTweaksVx.zip to Your Sdcard.
-Run NX_Installer.sh(Use Script Manager) to install
-Then Wait Until it Finish
-Enjoy
ScreenShot:
Soon
Credits:
Defiant07 - SwapItOn Script And Permission
zeppelinrox - V6Supercharger
LENAROX - For Teachings
pikachu01 - Thunderbolt
Slaid480
andeveloper
XAP40
All Script Creators At xda-developers
Note:
Any changes/Modifications For this Tweaks Are probihited.
If You Want To Include this To your Rom, Give A proper Credit and link for this.
This Tweaks and me Are not responsible to what anything To your phone.
Enjoy:thumbup:!!!
Project In Progress
Sorry for waiting...
How To Use:
soon
Changes:
soon
Download Links
V1
soon | Mediafire |Beta
soon | Mediafire |ROM Version
V2
soon | Mediafire
Tips:
Soon
Sent from my E10i using xda app-developers app
nice mate! you're back!
Hi Bro, sorry for not coming Back because im serious with my studies...
Sent from my E10i using xda app-developers app
R3v3nGe said:
Hi Bro, sorry for not coming Back because im serious with my studies...
Sent from my E10i using xda app-developers app
Click to expand...
Click to collapse
ok, so be serious on that!
The feature list sounds good I will be waiting for your link
Thanks bro...
Sent From My NitroX E10i using xda app...
Sorry Guys, The Project will finish at Sept 1 because of some testing... sorry for my english...
Sent From My NitroX E10i using xda app...
Waiting for next great script,,
RenzkiPH said:
Breaking News:
App Manager Feature will no longer Added Because Of Some issues.
NXEngine Will Release Next Week.. Please Wait
"This Tweak/Mod Will Boost Your X10 Mini/Pro"
This Script is for E10i and U20i only!
Requirements:
-GB/JB ROM
-GB/JB KERNEL
-4MB or Up Free On /system
-A x10 mini/pro phone
Features
-Zipalign(Auto/Manual)
-2 Boost Modes(Normal/Gaming)
-Fix Permissions(Auto/Manual)
-Database/db Optimize(Auto/Manual)
-3G/4G/WIFI Enhancement
-Blocks All Advertisment/Ads
-Entropy(Reduces Lags)
-Clean your phone
-Drop Caches
-Wipes Dalvik cache
-Reboots Your Phone
-SwapItOn By Defiant07
-sysctl Tweaks
-init.d Tweaks
-build.prop Tweaks
-All Tweaks Enabled at boot
Installation:
-Extract the NXEngineTweaksVx.zip to Your Sdcard.
-Run NX_Installer.sh(Use Script Manager) to install
-Then Wait Until it Finish
-Enjoy
ScreenShot:
Soon
Credits:
Defiant07 - SwapItOn Script And Permission
zeppelinrox - V6Supercharger
LENAROX - For Teachings
pikachu01 - Thunderbolt
Slaid480
andeveloper
XAP40
All Script Creators At xda-developers
Note:
Any changes/Modifications For this Tweaks Are probihited.
If You Want To Include this To your Rom, Give A proper Credit and link for this.
This Tweaks and me Are not responsible to what anything To your phone.
Enjoy:thumbup:!!!
Project In Progress
Sorry for waiting...
Click to expand...
Click to collapse
this is your script or not ?
i look your script same script like this http://forum.xda-developers.com/showthread.php?t=2529542:confused: