Tasker profiles - AT&T Samsung Galaxy Note I717

I know this thread is repeated everywhere, but I thought I'd start it up for our GNote forums
What are your Tasker profiles? I just found out how to use Tasker yesterday and I find myself loving it.
Mine are as follows:
1) Incoming Calls - Decrease volume to second lowest setting (I have loud friends)
2) Turn wifi on at home automatically
3) Open PowerAmp when headphones are plugged in
4) Send a "Happy Birthday!" text to various people on their birthdays.
5) Alert me when battery is full to 100%. Really useful if you don't want to overcharge your battery.
What about you guys?

---

Mute at work locations
Pandora + Bluetooth in car
Wifi at home
100% Battery alert
Auto-off unpaired Bluetooth
Regulated auto-sync based on battery
Long-press search changed to notification drawer open
Screen timeout change for various apps
Data off and screen timeout change for ad-supported games

---

I posted a couple just recently in this thread...
http://forum.xda-developers.com/showpost.php?p=23151996&postcount=25
Here's a C&P for the lazy....
______________________________________________
Car Profile
Enter Task
1) Disable PIN Security so I don't need to unlock my phone while in the car (one less distraction)
2) Set Media Volume to 15
3) Turn Wifi off
4) Change Display timeout to 30 minutes (nice for google maps and viewing the album art of the streaming music)
5) Turn on GPS IF power is connected to phone
6) Start recording video with DailyRoads Voyager ( A car DVR program in case of an accident so you then have Objective evidence)
7) Play the THX sound after a couple seconds to make sure the Bluetooth audio streaming is working right
Car EXIT task
1) Stop Recording Video for DailyRoads Voyager (DRV)
2) Wait 5 seconds
3) Kill App - DRV
4) Perform Task - PIN ON
5) Secure Settings - Disable GPS
6) Display Timeout - 2 min
7) WiFi - Turn ON
8) Bluetooth - Off
9) Display Brightness - Set to 150 out of 255
Other fun stuff
Home VAR %STATUS_HOME
Set VAR for when I am near my home micro-cell as the signal radius is small and specific to my house. I use this since the phone part is always on and I don't need to use GPS to determine location which uses more juice. That VAR is then used to turn on wifi when I arrive at home, disable PIN again, Flash "Welcome home", set WiFi sleep to Never. The Exit task for when I leave home turns PIN ON and sets the WiFi sleep policy to Never While Plugged"
Power VAR %STATUS_POWER
I have 2 seperate profiles for when I am connected to AC or USB power. The AC one sets the power VAR to 2 while the USB one sets it to 1. Both are used for other tasks and profiles, like the car one above requires AC connection so my GPS doesn't drain my battery even while connected. I have it flash "AC connected" or "USB connected" to let me know if the phone is receiving the correct amount of juice. When both of them exit they set the Power VAR to 0 and flash "Power Disconnected"
Sleepy Time
Profile conditions
1) Time - From 00:01 to 06:30
2) State - Home VAR = 1 (so this doesn't happen when I am out and about somewhere at night)
Enter Task - In case I'm tinkering with the phone in bed and don't want to keep the wifey up with a blazing screen and vibrations when clicking buttons. Also prevents annoying sounds at night by disabling data sync and muting all but the Alarm audio.
1) AutoSync -OFF
2) Flash "Good night"
3) Display brightness at 0
4) Screen Filter set to 25%
5) Perform Task - Alarm Audio only
Alarm Audio only task above
1) Alarm Volume - 4
2) Flash "Alarm Audio Only"
3) Haptic Feedback - Off
4) Notification Volume - 0
5) Ringer volume - 0
6) System volume - 0
7) Media volume - 0
Exit Task
1) AutoSync - On
2) Display Brightness - 255
3) Screen Filter - 100%
Quick Stats - This has two parts. One is the Notification that tells me a bunch of info I like to know like Battery level, Screen timeout, screen brightness and CPU govenor. The second part is launching a menu whe nI click on the the notification that has the commonly used Screen brightness & timeouts I use. I need to add some audio options in there too. I re-discovered that menu was there the entire time and didn't see the + button add more items to the menu. Iwas over complicating it by trying to use Scenes as a pop-up menu. Still need to learn more about Scenes.
Part 1 - Quick Stats Notification
State - Orientation Face Up (I use this state so if I want to refresh the stats all I do put the phone face up. There is automatically a time stamp so I can know when the stats were last updated)
Task - Notify Quick Stats
1) Notify - with Battery level, Screen timeout, screen brightness and CPU govenor variables as the text.
Part 2 - Notification Bar Tool
Event - Notification Click
Task - Quick Stats Menu
1) Menu with options for display brightness at 0, 100 or 255. Display timeout options for 30 secs, 2 min, 10 min and 30 min
Remote PIN Disable - This is for in case I forget my pin this will disable the PIN likew used in the Car and Home profiles. It is triggered by receiving a text from certain people with a specific phrase.
Event - Text with specific phrase under Content
Task - PIN OFF
Where Are You - Here's a 3 part setup. If I can't find my phone I again send a text with a specific phrase that then cranks up all volume settings to MAX and repeat "The Most Annoying Sound in the world" by Jim Carrey from Dumb & Dumber. The text sets a VAR called %SHUTUP to 1. When %SHUTUP = 1 it triggers Part 2. Once I find the phone to set the VAR back to 0 I shake the phone.
Part 1 - Where Are You Status
Event - Received Text with specific phrase
Task - Variable Set - %SHUTUP = 1
Part 2 - Where Are You Status
State - Variable Value = 1
Task - Where Are You Audio
1) Perform Task - Crank It Up (sets all volumes to MAX)
2) Flash - "I'm over here!"
3) Music Play - Annoy.wav
4) Wait - 15 sec
5) Goto - Top of Loop IF %SHUTUP = 1
Part 3 -Shutup Shake
Event - Shake
Task
1) Variable Set - %SHUTUP = 0
2) Flash "SHUT UP!!!"
A couple more but they are straight from the Tasker Wiki

---

I'm definitely going to have to do those. Right now, all I understand is the basics of Tasker (no where near Variables) but I'll follow your instructions.
Thanks especially for "Where are you"

---

A few I use....
1). Pocket Lock - Detects when phone is upside down in my pocket and activates WidgetLocker.
2). Read Caller Aloud - Incoming caller name said aloud so I can decide whether I want to answer without looking at my phone.
3). Night Mode - From 00:00 to 06:00 Puts phone into silent mode, plus checks whether Wifi, Data, GPS, or Blutooth are on, and turns them off if they are.
4). Battery Low - When battery gets to 15%, and it's not connected to a charger, Says "Battery low, connect charger" and turns off Wifi, BT, Data, GPS.
5). Music Player - When headset is plugged in, loads music app.
6). Home - Gets general location from cell tower, activates Wifi, disables Data & GPS. Exit Task disables Wifi, and enables Data.
7). Work - Gets general location from cell tower, disables Wifi, Data, GPS, BT, and Auto Replies to sms that im working and will reply when i can.
I'm pretty new to tasker, but have been pretty bored lately and have been working on an addition to my Work profile.
This profile will, use variables to save up to 5 peoples numbers and how many times each has txted me, and txt each of them back, using their names from my contact list in the body of each txt.
So lets say BOB txts me once, his number will be added as a variable, and it will begin counting the txts from him. On the first txt he is send a txt saying, something like. "Sorry BOB, im at work, will reply when i can".
Then DAVE txts, he will be assigned to Sender2, and have a txt sent to him like above, with the second Counter and Number (%CNTR2 and %SNDR2).
BOB, realizing it's an auto-reply, decides to be funny and spam txt me, thinking he will get a reply every time. However, tasker counts his incoming txts, (%CNTR1) and when it reaches a value of 10, send just one more txt saying something like (Thats 10 txts you've sent, seems Im still unavailable).
Profile: Auto Reply
Variables:
%SNDR1 <---- BOBs cell number
%SNDR2 <---- DAVEs cell number
%SNDR3
%SNDR4
%SNDR5
%CNTR1 <---- BOBs txt counter
%CNTR2
%CNTR3
%CNTR4
%CNTR5
%TXTVAR <---- Counter determining whether a txt received is from someone new or a number already saved.
Enter Task:
Code:
1). GoTo label Sender1 if %SMSRF ~ %SNDR1
2). GoTo label Sender2 if %SMSRF ~ %SNDR2
3). " " etc.
4).......
5).....
6). If (%SNDR1 ~ 0) then SetVariable %SNDR1 to %SMSRF
7). If (%SNDR2 ~ 0) and (%TXTVAR = 1) then SetVariable %SNDR2 to %SMSRF
8). If (%SNDR3 ~ 0) and (%TXTVAR = 2) then SetVariable %SNDR3 to %SMSRF
9)........etc.
10).
11). If (%SMSRF ~ %SNDR1) <-------- Label Sender1
Variable Add (%CNTR1 + 1)
If (%CNTR1 = 1)
Send SMS (Tells this person eg. BOB I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR1 = 10)
Send SMS to %SNDR1 (Thats 10 txts you've sent me)
Endif x2
12). If (%SMSRF ~ %SNDR2) <-------- Label Sender2
Variable Add (%CNTR2 + 1)
If (%CNTR2 = 1)
Send SMS (Tells this person eg. DAVE I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR2 = 10)
Send SMS to %SNDR2 (Thats 10 txts you've sent me)
Endif x2
13). If (%SMSRF ~ %SNDR3) <-------- Label Sender3
Variable Add (%CNTR3 + 1)
If (%CNTR3 = 1)
Send SMS (Tells this person eg. EMILY I'm at work)
Variable Add (%TXTVAR + 1)
Else If (%CNTR3 = 10)
Send SMS to %SNDR3 (Thats 10 txts you've sent me)
Endif x2
14). ......Etc.
15). ......
I'm still working on it, deciding whether to have the variables reset as they are all filled, 1 at a time, or to make them reset every hour or so. Also whether to make another profile purely for resetting those variables, or add them to this task. Bearing in mind that on my phone it gets rather annoying to manage/edit the task since its currently at 78 lines long.
As I said I was bored.
If anyone is interested in this I can post a backup xml of this somewhere.

---

TriggerSpasm said:
BOB, realizing it's an auto-reply, decides to be funny and spam txt me, thinking he will get a reply every time. However, tasker counts his incoming txts, (%CNTR1) and when it reaches a value of 10, send just one more txt saying something like (Thats 10 txts you've sent, seems Im still unavailable).
[...]
As I said I was bored.
Click to expand...
Click to collapse
Bored indeed. Anywho, look into arrays in Tasker, that'll make this tracking stuff much easier. Track all of that stuff in one array vs a bunch of different ones. Might clean up the code a little, make it easier to erm.. relieve more boredom?

---

khaytsus said:
Bored indeed. Anywho, look into arrays in Tasker, that'll make this tracking stuff much easier. Track all of that stuff in one array vs a bunch of different ones. Might clean up the code a little, make it easier to erm.. relieve more boredom?
Click to expand...
Click to collapse
Thanks, I certainly will.

---

Using Tasker http://www.pocketables.com/forum//showthread.php?t=9680
Scripted Backups using Tasker and TWRP http://www.pocketables.com/forum//showthread.php?t=11435
Beginner’s guide to Tasker http://www.pocketables.com/tag/beginners-guide-to-tasker

---

Tasks to:
(1) Take photos and email them when a specific text message is received
(2) Lock and password protect the phone when a specific text message is received
(2) Use different keyboards depending on the open app or screen orientation