Hey guys, I used CWM 5.0.2 to flash Oxygen ROM many times after a full wipe includind boot, cache and system... The ROM boots sucessfully but then I get a random reboot which wipes my all /data apps ... tried reflashing many times after wiping everything even changed the kernel, but still, the same problem... Should I use a different recovery to flash ? but which one ? Or does my phone hates oxygen ??
umangleekha said:
Hey guys, I used CWM 5.0.2 to flash Oxygen ROM many times after a full wipe includind boot, cache and system... The ROM boots sucessfully but then I get a random reboot which wipes my all /data apps ... tried reflashing many times after wiping everything even changed the kernel, but still, the same problem... Should I use a different recovery to flash ? but which one ? Or does my phone hates oxygen ??
Click to expand...
Click to collapse
Tune down your OC
nocterum said:
Tune down your OC
Click to expand...
Click to collapse
It used to reboot on 600 mhz only though with CM I can OC upto 768
Might be a problem with a2sd? Maybe incompatibilities?
Sent from my LG-P500 using XDA
nocterum said:
Might be a problem with a2sd? Maybe incompatibilities?
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
no a2sd is installed
umangleekha said:
no a2sd is installed
Click to expand...
Click to collapse
Now this is weird.....maybe bad file or something
use cm7 and problem will be 100% fixed
umangleekha said:
Hey guys, I used CWM 5.0.2 to flash Oxygen ROM many times after a full wipe includind boot, cache and system... The ROM boots sucessfully but then I get a random reboot which wipes my all /data apps ... tried reflashing many times after wiping everything even changed the kernel, but still, the same problem... Should I use a different recovery to flash ? but which one ? Or does my phone hates oxygen ??
Click to expand...
Click to collapse
Recovery is not a problem, coz i used CWM is well for flashing oxygen and i haven't honestly experienced a self reboot yet... Its very stable...
---------- Post added at 03:16 PM ---------- Previous post was at 03:09 PM ----------
Try re downloading the rom n try once more, if still don't work...then i'm very sorry, but ur last four words might be the answer... "my phone hates oxygen"
down your OC or flash AmonRa 3.0.6....
check this
http://forum.xda-developers.com/showthread.php?t=1523050
Click to expand...
Click to collapse
you can try another recovery.
Related
help,HLEP.
my GT is died~~~~
yestday it works very well
but , today,when I flash a rom ,at the begining ,it very well
then, it reboot by itself!~~~~~
then I flash another ROM, the same problem happen ,
NOW whatever rom , it reboot by itself ,~~~~
what should I do~~???
flash via odin stock rom gingerbread
lexyin said:
help,HLEP.
my GT is died~~~~
yestday it works very well
but , today,when I flash a rom ,at the begining ,it very well
then, it reboot by itself!~~~~~
then I flash another ROM, the same problem happen ,
NOW whatever rom , it reboot by itself ,~~~~
what should I do~~???
Click to expand...
Click to collapse
What ROM did you flash ?
lexyin said:
then, it reboot by itself!~~~~~
Click to expand...
Click to collapse
well seems like you are in bootloop.....
if you know something about recovery then go to it and wipe data
EmoBoiix3 said:
What ROM did you flash ?
Click to expand...
Click to collapse
every rom !!
I flashed zckpb,zckc1,zskpd,cm7-kang~~~every rom has happened this ,~~~
standard name said:
flash via odin stock rom gingerbread
Click to expand...
Click to collapse
what is this mean??I dont understand~~
madman_amit said:
well seems like you are in bootloop.....
if you know something about recovery then go to it and wipe data
Click to expand...
Click to collapse
no ~~it is not bootloop.....~~
as I said,when I used~~it reboot ~~~forexample:when I phoning~~It reboot ~~I dont known why~~every rom has this problem
lexyin said:
what is this mean??I dont understand~~
Click to expand...
Click to collapse
Odin is a software.For more information on flashing via Odin,go http://forum.xda-developers.com/showthread.php?t=1034145
---------- Post added at 07:08 PM ---------- Previous post was at 07:06 PM ----------
lexyin said:
no ~~it is not bootloop.....~~
as I said,when I used~~it reboot ~~~forexample:when I phoning~~It reboot ~~I dont known why~~every rom has this problem
Click to expand...
Click to collapse
You mean,you can turn the phone on,it boots fine and then when you phone with it,it reboots....weird
try remove the battery, go in recovery mod and do a wipe/data reset after flash the stock rom
lexyin said:
help,HLEP.
my GT is died~~~~
yestday it works very well
but , today,when I flash a rom ,at the begining ,it very well
then, it reboot by itself!~~~~~
then I flash another ROM, the same problem happen ,
NOW whatever rom , it reboot by itself ,~~~~
what should I do~~???
Click to expand...
Click to collapse
switch off your ace... HOLD PRESS MIDDDLE KEY+then press on power on button... leave power on screen as the screen open but hold on middle button till you get to recoery....
FACTORY RESTE WIPE CACHE WIPE DALVIK CACHE.. FORMAT SD , SD-EXT .... (remove SIM )... (FOLLOW IT EVERY TIME BEFORE U FLASH A ROM) ...
now flash via ODIN (if flashing STCOK ROM)
for custom rom prefer FLASHING BY CLOCKWORKMOD 4 (clockworkmod 5 is for cyanogen)
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
My P500 hasn't been co-operating AT ALL lately. Every custom ROM that I flash and try out gets stuck in bootloops after rebooting. I don't flash anything apart from what the developer says to flash, but I always get stuck on bootloops. Also, whenever I try restoring a nandroid backup, it gets stuck in a bootloop as well. Every reboot causes a bootloop. What am I doing wrong?
johnafer said:
My P500 hasn't been co-operating AT ALL lately. Every custom ROM that I flash and try out gets stuck in bootloops after rebooting. I don't flash anything apart from what the developer says to flash, but I always get stuck on bootloops. Also, whenever I try restoring a nandroid backup, it gets stuck in a bootloop as well. Every reboot causes a bootloop. What am I doing wrong?
Click to expand...
Click to collapse
It could be your sd card causes. Try to use another sd card and install a rom. Just a suggestion.
recreation012 said:
It could be your sd card causes. Try to use another sd card and install a rom. Just a suggestion.
Click to expand...
Click to collapse
Hm, never thought of that. I'll test it out tonight and I'll get back to you.
Do you clear data, and system and boot before flashing?
Seek the signature below the line
Bootlop is normal when recovering a nandroid backup trough cwm
Try wipping cache, dalvik cache, data and /system, them flash.
Sent from my LG-P500 using xda premium
FPChaim said:
Bootlop is normal when recovering a nandroid backup trough cwm
Try wipping cache, dalvik cache, data and /system, them flash.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yeah, I do all the prerequisities everytime I flash a new ROM. Wipe Data, Cache, dalvik, /System, but it still bootloops.
Right now I'm on CM7.2 Nightly with Stock kernel, but I wanna test some other ROMs to help out with development. Of course, I can't because of this bootloop issue.
johnafer said:
Yeah, I do all the prerequisities everytime I flash a new ROM. Wipe Data, Cache, dalvik, /System, but it still bootloops.
Right now I'm on CM7.2 Nightly with Stock kernel, but I wanna test some other ROMs to help out with development. Of course, I can't because of this bootloop issue.
Click to expand...
Click to collapse
Use amonra. It is better than cwm 5.0.2.7
Sent from my LG-P500
bootloops
try flashing a lg 2.3.3 stock rom then flash something else i had the same problem that fixed it
I already am using AmonRa - forgot to mention.
I did notice in the phone info for each ROM I use, the baseband would have some weird characters like ".\*@ ../?" rather than the "LGP500 V20G etc etc" that it should have. So, I re-flashed the new baseband via LGMDP.exe and now I'm using the AOPK APHONETHATIUSE custom ROM and it seems to be fine.
I also did reformat and partition the SD card just to be sure that there's no problems with that.
I'll use it for a while and I'll see what happens.
I had the same problem flash it with v20g first with kdz and u can use it in any manner; )
Sent from my LG-P500 using xda premium
lg p500 bootloop after installing custom rom
i just now installed custom rom CM7 RC1 with Bravia display Hack, Beats audio and Xloud ! and got stuck into bootloop(showing an animation and stuck)......
i can't go back to clockmod recovery by pressing volume down key+power.....is there any way to get my phone back? or throw it to dustbin???
samganesh said:
i just now installed custom rom CM7 RC1 with Bravia display Hack, Beats audio and Xloud ! and got stuck into bootloop(showing an animation and stuck)......
i can't go back to clockmod recovery by pressing volume down key+power.....is there any way to get my phone back? or throw it to dustbin???
Click to expand...
Click to collapse
If it is able to boot into emergency mode, use kdz updater.
Sent from my LG-P500 using xda premium
lg p500 bootloop
i just now installed custom rom CM7 RC1 with Bravia display Hack, Beats audio and Xloud ! and got stuck into bootloop(showing an animation and stuck)......
i can't go back to clockmod recovery by pressing volume down key+power.....is there any way to get my phone back? or throw it to dustbin???
try volume down + home + power...
A million times thanks ManBearr !!!!
ManBearrrPig said:
try volume down + home + power...
Click to expand...
Click to collapse
u jus saved me !! thanks a lot buddy. pls follow my recent post to see what my issue was... great. thanks a lot .
Hi,
When i woke up this morning my phone was attempting to boot, but was stuck on my boot animation. So i pulled out the battery and rebooted, since then it has been turning on for a couple mins than rebooting the phone its self is slightly warmer than usual, but it has been hotter before. I have attempted to back up my data using cwm, but the reboot still happens, im unsure if its on the same file that causes the reboot. Im trying to back it up to completely wipe it and see if that makes a difference.
I would be grateful for any help in the matter.
ads2996 said:
Hi,
When i woke up this morning my phone was attempting to boot, but was stuck on my boot animation. So i pulled out the battery and rebooted, since then it has been turning on for a couple mins than rebooting the phone its self is slightly warmer than usual, but it has been hotter before. I have attempted to back up my data using cwm, but the reboot still happens, im unsure if its on the same file that causes the reboot. Im trying to back it up to completely wipe it and see if that makes a difference.
I would be grateful for any help in the matter.
Click to expand...
Click to collapse
Hi,
i would boot into CWM or TWRP and then i would do a wipe cache / dalvik, and flash your "rom.zip" from internal or external sd card. If that does not work then do a factory reset and flash "rom.zip". If the problem still exists what i do not hope for you, then you have to wipe all your data without doing a nandroid backup and then flashing again. Do you have a stock rom installed or what rom do you have and what kind of kernel?
But try to flash your rom and kernel again . Hope it will help your "Diva" ?!
Sounds to me ur power button is stuck.
Sent from my GT-I9300 using xda app-developers app
DrEVILone81 said:
Hi,
i would boot into CWM or TWRP and then i would do a wipe cache / dalvik, and flash your "rom.zip" from internal or external sd card. If that does not work then do a factory reset and flash "rom.zip". If the problem still exists what i do not hope for you, then you have to wipe all your data without doing a nandroid backup and then flashing again. Do you have a stock rom installed or what rom do you have and what kind of kernel?
But try to flash your rom and kernel again . Hope it will help your "Diva" ?!
Click to expand...
Click to collapse
im running the stock rom with siyah kernal and jkay framework.Well i wiped the /data and it seemed to work then i did the foolish thinng of trying to flash a /system backup i had. So m back to where i started. I'm downloading the latest stock rom for my network and am gonna try and flash via odin. Hopefully that fixes it.
When falshing with odin does it wipe /sdcard?
JellyYogurt said:
Sounds to me ur power button is stuck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
When ever i do get booted into my phone i am still able to use my power button as normal. And the power options box odesnt appear before it reboots either.
JellyYogurt said:
Sounds to me ur power button is stuck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
This could be the easiest solution.....:laugh::good:
But i love flashing and so it was my proposal:angel:
DrEVILone81 said:
This could be the easiest solution.....:laugh::good:
But i love flashing and so it was my proposal:angel:
Click to expand...
Click to collapse
I take it the only way to fix a stuck power button is by taking it apart?
ads2996 said:
im running the stock rom with siyah kernal and jkay framework.Well i wiped the /data and it seemed to work then i did the foolish thinng of trying to flash a /system backup i had. So m back to where i started. I'm downloading the latest stock rom for my network and am gonna try and flash via odin. Hopefully that fixes it.
When falshing with odin does it wipe /sdcard?
Click to expand...
Click to collapse
No i meant you should flash your rom.zip, but when you have istalled a stock rom then you dont have a zip file of it on your sd-card, which you can flash. But a normal odin flash of your stock will solve your problem, and then you can do a custom nandroid backup in CWM (EFS, DATA partition etc). I hope odin will do a complete delete of your /system, /data/media, /data partition. But try it
DrEVILone81 said:
No i meant you should flash your rom.zip, but when you have istalled a stock rom then you dont have a zip file of it on your sd-card, which you can flash. But a normal odin flash of your stock will solve your problem, and then you can do a custom nandroid backup in CWM (EFS, DATA partition etc). I hope odin will do a complete delete of your /system, /data/media, /data partition. But try it
Click to expand...
Click to collapse
I jhave managed to restore /system and /boot so can now enter my phone after being stock reset. When i try to format /data through cwm it reboots and when i open appalications manger it also crashes it is filled with apps that arent installed on the phone
Wait a moment man.....sounds not pretty good...but we can manage it
---------- Post added at 07:00 PM ---------- Previous post was at 06:49 PM ----------
We should do a full wipe of your phone.....:laugh:
1. Load a rom xyz.zip file on your external sd card (i would recommend not a stock rom)
2. Reboot into CWM (what version do you have ??? etc. It is very important for your new rom what you want to install instep 6)
3. Do a full wipe (wipe cache / wipe dalvik cache)
4. Factory Reset
5. Delete /data and /data/media i mean everything (so your internal sd card has to be empty and empty)
6. Install zip file from sdcard1 (external sd card)
so a new rom will be flashed dont forget it, its your phone
7. REBOOT
8. Now you have a newly fresh installed ROM on your S3 :good::laugh:
All your data is lost.....but your phone works
---------- Post added at 07:23 PM ---------- Previous post was at 07:00 PM ----------
When you flashed with odin?! Havent you?! Then these are the apps of the bloated stock-firmware......
DrEVILone81 said:
Wait a moment man.....sounds not pretty good...but we can manage it
---------- Post added at 07:00 PM ---------- Previous post was at 06:49 PM ----------
We should do a full wipe of your phone.....:laugh:
1. Load a rom xyz.zip file on your external sd card (i would recommend not a stock rom)
2. Reboot into CWM (what version do you have ??? etc. It is very important for your new rom what you want to install instep 6)
3. Do a full wipe (wipe cache / wipe dalvik cache)
4. Factory Reset
5. Delete /data and /data/media i mean everything (so your internal sd card has to be empty and empty)
6. Install zip file from sdcard1 (external sd card)
so a new rom will be flashed dont forget it, its your phone
7. REBOOT
8. Now you have a newly fresh installed ROM on your S3 :good::laugh:
All your data is lost.....but your phone works
---------- Post added at 07:23 PM ---------- Previous post was at 07:00 PM ----------
When you flashed with odin?! Havent you?! Then these are the apps of the bloated stock-firmware......
Click to expand...
Click to collapse
I'm just back from hockey and have managed to restore the phone to what i had before. So im on 4.1.2 and the random apps have disappeared, and the internal sd card has been wiped so lost a few fb photos nothing serious, well that i can remember.
I am either goign to go with the latest firmware from my carrier which is 4.3 or a newer rom, i would really like to try dual booting android and ubuntu. Any suggestions?
FLASH and TRY
ads2996 said:
I'm just back from hockey and have managed to restore the phone to what i had before. So im on 4.1.2 and the random apps have disappeared, and the internal sd card has been wiped so lost a few fb photos nothing serious, well that i can remember.
I am either goign to go with the latest firmware from my carrier which is 4.3 or a newer rom, i would really like to try dual booting android and ubuntu. Any suggestions?
Click to expand...
Click to collapse
I am happy about that your S3 is working well, its one of the best devices and xda support for our device is nice.....
I use fusion kitkat rom with the stable boeffla kernel in it......YOU must try it. I appreciate it:good:
There are two dualboot kernel for our devices: googymax2 (development of siyah kernel and devil2.....i tried both
naturally with dualboot installed. but im also waiting for a stable version of ubuntu touch and then ........:crying::laugh: there is
also a thread here or you must "google" man you will find sth. But in my opinion try sth different from the stock-rom......OUR XDA-DEVELOPERS
are GREAT......CM11, SLIM or sth like that.......try
---------- Post added at 10:08 PM ---------- Previous post was at 09:51 PM ----------
DrEVILone81 said:
I am happy about that your S3 is working well, its one of the best devices and xda support for our device is nice.....
I use fusion kitkat rom with the stable boeffla kernel in it......YOU must try it. I appreciate it:good:
There are two dualboot kernel for our devices: googymax2 (development of siyah kernel and devil2.....i tried both
naturally with dualboot installed. but im also waiting for a stable version of ubuntu touch and then ........:crying::laugh: there is
also a thread here or you must "google" man you will find sth. But in my opinion try sth different from the stock-rom......OUR XDA-DEVELOPERS
are GREAT......CM11, SLIM or sth like that.......try
Click to expand...
Click to collapse
Ithink the development of ubuntu touch is discontinued. Its a thread also.....
But running ubuntu on your device is possible as an arm version...... linux deploy apk.....and then you can have a look on whats
possible. But its not a real dualboot..... It runs from your external / internal sd card...
DrEVILone81 said:
I am happy about that your S3 is working well, its one of the best devices and xda support for our device is nice.....
I use fusion kitkat rom with the stable boeffla kernel in it......YOU must try it. I appreciate it:good:
There are two dualboot kernel for our devices: googymax2 (development of siyah kernel and devil2.....i tried both
naturally with dualboot installed. but im also waiting for a stable version of ubuntu touch and then ........:crying::laugh: there is
also a thread here or you must "google" man you will find sth. But in my opinion try sth different from the stock-rom......OUR XDA-DEVELOPERS
are GREAT......CM11, SLIM or sth like that.......try
---------- Post added at 10:08 PM ---------- Previous post was at 09:51 PM ----------
Ithink the development of ubuntu touch is discontinued. Its a thread also.....
But running ubuntu on your device is possible as an arm version...... linux deploy apk.....and then you can have a look on whats
possible. But its not a real dualboot..... It runs from your external / internal sd card...
Click to expand...
Click to collapse
Thank you very much for all your help in sorting out my phone it is greatly appreicated
ads2996 said:
Thank you very much for all your help in sorting out my phone it is greatly appreicated
Click to expand...
Click to collapse
I dont want to sort out "our" phone.....i ve the same one...... I am not very convinced about the stock roms....but the SIII is great
and is developed in a positive way....in a kind of future development to improve the ram and so on through the kernel.....
ads2996 said:
When ever i do get booted into my phone i am still able to use my power button as normal. And the power options box odesnt appear before it reboots either.
Click to expand...
Click to collapse
It doesnt if the power button is stuck continuously as when u press and hold the power button, it hard reboots so no menu is given. Go google search 'gs3 power button stuck'. Trust me. All of their cases are similar to urs.
Sent from my GT-I9300 using xda app-developers app
Hi Guys,
Need some help here. Got a weird problem with my OpX. I have a habit of trying each and every rom on our forum. So, as usually after trying a rom for a day or two I used to revert back to my fav rom. So, I'm familiar with all those flashing stuffs. The problem right now is that I'm not able to boot into any 6.0.1 Rom that I flash. No matter what I do it doesn't boot, just stuck at bootloop. I'm just tired trying out each and every rom out on the developer's section. Wiped completely, even tried downloading the rom multiple times. Tried all type of flashing, like with gapps, without gapps, with gapps, with SU. Tried all possible combination just to end in vain . None of the rom boot into HS, it's just stuck in the bootloop .
However, I've no problem in flashing OOS, H2OS, Color OS, Cm12.1 rom. It flashes without any issues and works fine.
Any help would be appreciated. Thanks in advance
Did you perform a full wipe ( sys/data/cache) when you changed android version (5.1 --> 6.0.1)
Nexx_ said:
Did you perform a full wipe ( sys/data/cache) when you changed android version (5.1 --> 6.0.1)
Click to expand...
Click to collapse
Yes, I even wiped the internal.
Anyone?
prarun2030 said:
Anyone?
Click to expand...
Click to collapse
Maybe you're using F2FS ?
Nexx_ said:
Maybe you're using F2FS ?
Click to expand...
Click to collapse
No bro, not using it. Did a dirty flash over OOS 5.1.1 by wiping data alone and it booted up. Still it doesn't boot if i do a complete wipe..